2AKCY-HIWMSB1BLEMOTION SENSOR

HIWMSB1BLE40AWH – MOTION SENSOR INSTALLATION INSTRUCTIONS HIWMSB1 BLE40AWH – MOTION SENSOR INSTALLATION INSTRUCTIONS HIWMSB1BLE40AWH – MOTION SENSOR INSTALLATION INSTRUCTIONS IL518124ML A. Open the accessory bag and locate the drywall anchors and associated screws (2 pcs of each). B. Separate the surface mount bracket (Fig 1) and the battery powered motion sensor. C. Install the surface mount bracket to the selected surface by screwing the bracket to the wall in 2 places on the flat surface of the bracket. If preferred, a piece of double-sided adhesive has also been provided to adhere the bracket to the wall. NOTE: The bracket will allow the battery powered motion sensor to be installed in the corner of a room if desired. Use the angled surfaces to screw the bracket to each surface of the wall. D. Hang the motion sensor onto the bracket and follow the quick start guide to setup the app and controller and any associated devices as needed. A. Open the accessory bag and locate the drywall anchors and associated screws (2 pcs of each). B. Separate the surface mount bracket (Fig 1) and the battery powered motion sensor. C. Install the surface mount bracket to the selected surface by screwing the bracket to the wall in 2 places on the flat surface of the bracket. If preferred, a piece of double-sided adhesive has also been provided to adhere the bracket to the wall. NOTE: The bracket will allow the battery powered motion sensor to be installed in the corner of a room if desired. Use the angled surfaces to screw the bracket to each surface of the wall. D. Hang the motion sensor onto the bracket and follow the quick start guide to setup the app and controller and any associated devices as needed. A. Open the accessory bag and locate the drywall anchors and associated screws (2 pcs of each). B. Separate the surface mount bracket (Fig 1) and the battery powered motion sensor. C. Install the surface mount bracket to the selected surface by screwing the bracket to the wall in 2 places on the flat surface of the bracket. If preferred, a piece of double-sided adhesive has also been provided to adhere the bracket to the wall. NOTE: The bracket will allow the battery powered motion sensor to be installed in the corner of a room if desired. Use the angled surfaces to screw the bracket to each surface of the wall. D. Hang the motion sensor onto the bracket and follow the quick start guide to setup the app and controller and any associated devices as needed. SURFACE MOUNT METHODSURFACE MOUNT METHODSURFACE MOUNT METHOD ONLY USE WITH HALO HOME LIGHTING FIXTURES, CONTROLS AND ACCESSORIES. À UTILISER SEULEMENT AVEC LES LUMINAIRES, COMMANDES ET ACCESSOIRES HALO HOME. UTILICE ÚNICAMENTE CON LAS LUMINARIAS HALO HOME, CONTROLES Y ACCESORIOS. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. Chemical Burn Hazard. Keep batteries away from children. • This product contains a lithium battery. If a new or used lithium cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. • The cells shall be disposed of properly, including keeping them awa y from children. • Even used cells may cause injury. Peligro de e xplosión si la batería es incorrectamente remplazada. reemplace únicamente con la misma o tipo equivalente. La batería (batería o baterías o paquete de baterías) no deberá ser expuesta a calor excesivo como luz del sol, fuego o algo parecido. Peligro de quemadura química. Mantenga las baterías alejadas de los niños. •Este producto contiene una pila de botón de litio / moneda. Si una batería nueva o usada pila de botón / botón de litio se ingiere o entra en el cuerpo, puede causar quemaduras internas graves y puede conducir a la muerte en tan sólo 2 horas. Siempre asegure por completo el compartimiento de la batería. Si el compartimiento de la batería no se cierra de forma segura, deje de usar el producto, retire las pilas, y mantenerlo alejado de los niños. Si cree que las baterías pueden haberse tragado o colocado dentro de cualquier parte del cuerpo, busque atención médica inmediata. • Las baterías deben eliminarse de manera adecuada, incluyendo mantenerlos alejados de los niños. • Incluso las baterías usadas pueden causar lesiones. Risque d’explosion si la pile n’est pas remplacée correctement. Remplacez-la par une pile identique ou équivalente. La pile (pile ou piles ou bloc-piles) ne doit pas être exposée à une chaleur intense comme les rayons du soleil, un feu ou source semblable. Risque de brûlures chimiques. Gardez les piles éloignées des enfants. •Ce produit renferme une pile au lithium. Si une pile fraîche ou usagée au lithium est avalée ou est ingérée par le corse, elle peut provoquer des brûlures internes graves et causer la mort en aussi peu que 2 heures. Assurez-vous de toujours fixer fermement la pile dans son logement. Si le logement de la pile ne se ferme pas solidement, cessez d’utiliser le produit, retirez les piles et gardez hors de la portée des enfants. Si vous croyez que les piles ont peut-être été ingérées ou insérez dans une partie quelconque du corps, consultez immédiatement un médecin. • Les piles doivent être jetées correctement y compris les garder hors de la portée des enfants. • Même les piles usagées peuvent causer des blessures. CHOKING HAZARD Small parts. Not for children under 3 years. RISQUE D’ÉTOUFFEMENT Petites pièces Non dédié aux enfants de moins 3 ans. PELIGRO DE ASFIXIA Piezas pequeñas. No apto para niños menores de 3 años. WARNINGAV…

Text truncated - open the document above for the full version.

Cooper Lighting LLC Date:5/20/2020 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc . as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by: Company Name: Cooper Lighting, LLC Contact Name: Chad Ruhala Title of Person：Compliance Manager Address: 1121 Hwy 74 S Peachtree City Georgia 30269 United States Date:5/20/2020

Cooper Lighting LLC Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2AKCY-HIWMSB1BLE To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: Cooper Lighting LLC Contact Name: Chad Ruhala Title of Person：Compliance Manager Address: 1121 Hwy 74 S Peachtree City Georgia 30269 United States

Appendix I External Photographs Page 2 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . View of EUT-1 View of EUT-2 Page 3 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . View of EUT-3 View of EUT-4 Page 4 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . View of EUT-5

MOTION SENSOR, DC 3V MM/YYYY SN: CLMSNAWxxyyzzzzzz 36x15mm

Appendix II Internal Photographs Page 2 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . Open View of EUT Internal View of EUT-1 Page 3 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . Internal View of EUT-2 Internal View of EUT-3 Page 4 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . Internal View of EUT-4 Antenna

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. This report does not imply that the product(s) has met the criteria for certification. FCC RF EXPOSURE REPORT For MOTION SENSOR MODEL NUMBER: HIWMSB1BLE40AWH FCC ID: 2AKCY-HIWMSB1BLE REPORT NUMBER: 4789482405-3 ISSUE DATE: May 22, 2020 Prepared for Cooper Lighting LLC 1121 Hwy 74 S Peachtree City, GA 30269 Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Building 10, Innovation Technology Park, No. 1, Li Bin Road, Song Shan Lake Hi-Tech Development Zone, Dongguan, People’s Republic of China Tel: +86 769-22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT No.: 4789482405-3 Page 2 of 6 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 3 2. TEST METHODOLOGY ..................................................................................................... 3 3. FACILITIES AND ACCREDITATION ................................................................................. 4 4. REQUIREMENT ................................................................................................................. 5 REPORT No.: 4789482405-3 Page 3 of 6 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: Cooper Lighting LLC Address: 1121 Hwy 74 S Peachtree City, GA 30269 Manufacturer Information Company Name: Cooper Lighting LLC Address: 1121 Hwy 74 S Peachtree City, GA 30269 EUT Description Product Name MOTION SENSOR Model Name HIWMSB1BLE40AWH Sample Status Normal Sample ID 3055726 Sample Received date May 13, 2020 Date Tested May 13 ~ 21, 2020 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC 47CFR§2.1091 KDB-447498 D01 V06 PASS Prepared By: Checked By: Kebo Zhang Shawn Wen Project Engineer Laboratory Leader Approved By: Stephen Guo Laboratory Manager REPORT No.: 4789482405-3 Page 4 of 6 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 2. TEST METHODOLOGY The tests documented in this report were performed in accordance with KDB 447498 D01 General RF Exposure Guidance v06. 3. FACILITIES AND ACCREDITATION Accreditation Certificate A2LA (Certificate No.: 4102.01) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been assessed and proved to be in compliance with A2LA. FCC (FCC Designation No.: CN1187) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. Has been recognized to perform compliance testing on equipment subject to the Commission's Delcaration of Conformity (DoC) and Certification rules ISED(Company No.: 21320) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been registered and fully described in a report filed with Industry Canada. The Company Number is 21320. VCCI (Registration No.: G-20019, R-20004, C-20012 and T-20011) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been assessed and proved to be in compliance with VCCI, the Membership No. is 3793. Facility Name: Chamber D, the VCCI registration No. is G-20019 and R-20004 Shielding Room B , the VCCI registration No. is C-20012 and T-20011 Note 1: All tests measurement facilities use to collect the measurement data are located at Building 10, Innovation Technology Park, Song Shan Lake Hi tech Development Zone, Dongguan, 523808, China Note 2: The test anechoic chamber in UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch had been calibrated and compared to the open field sites and the test anechoic chamber is shown to be equivalent to or worst case from the open field site. Note 3: For below 30MHz, lab had performed measurements at test anechoic chamber and comparing to measurements obtained on an open field site. And these measurements below 30MHz had been correlated to measurements performed on an OFS. REPORT No.: 4789482405-3 Page 5 of 6 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 4. REQUIREMENT LIMIT Limits for General Population/Uncontrolled Exposure Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Time |E| 2 , |H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f2)* 30 30-300 27.5 0.073 0.2 30 300-1500 -- -- f/150 30 1500-100,000 -- -- 1.0 30 Note 1: f = frequency in MHz, * means Plane-wave equivalent power density Note 2: General population/uncontrolled exposures apply in situations in which the general public may be exposed, or in which persons that are exposed as a consequence of their employment may not be fully aware of the potential for exposure or cannot exercise control over their exposure. Note 3: The limit value 1.0mW/cm 2 is available for this EUT. MPE CALCULATION METHOD S =PG/(4πR 2 ) where: S = power density (in appropriate units, e.g. mW/ cm2) P = power input to the a…

Text truncated - open the document above for the full version.

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. This report does not imply that the product(s) has met the criteria for certification. CFR 47 FCC PART 15 SUBPART C ISED RSS-247 ISSUE 2 CERTIFICATION TEST REPORT For MOTION SENSOR MODEL NUMBER: HIWMSB1BLE40AWH FCC ID: 2AKCY-HIWMSB1BLE IC: 4706A-HIWMSB1BLE REPORT NUMBER: 4789482405-1 ISSUE DATE: June 11, 2020 Prepared for Cooper Lighting LLC 1121 Hwy 74 S Peachtree City, GA 30269 Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Building 10, Innovation Technology Park, No. 1, Li Bin Road, Song Shan Lake Hi-Tech Development Zone, Dongguan, People’s Republic of China Tel: +86 769-22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT No.: 4789482405-1 Page 2 of 67 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . Revision History Rev. Issue Date Revisions Revised By V0 06/11/2020 Initial Issue REPORT No.: 4789482405-1 Page 3 of 67 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . Summary of Test Results Clause Test Items FCC/ISED Rules Test Results 1 6dB Bandwidth and 99% Occupied Bandwidth FCC Part 15.247 (a) (2) RSS-247 Clause 5.2 (a) ISED RSS-Gen Clause 6.7 Pass 2 Peak Conducted Output Power FCC Part 15.247 (b) (3) RSS-247 Clause 5.4 (d) Pass 3 Power Spectral Density FCC Part 15.247 (e) RSS-247 Clause 5.2 (b) Pass 4 Conducted Bandedge and Spurious Emission FCC Part 15.247 (d) RSS-247 Clause 5.5 Pass 5 Radiated Bandedge and Spurious Emission FCC Part 15.247 (d) FCC Part 15.209 FCC Part 15.205 RSS-247 Clause 5.5 RSS-GEN Clause 8.9 Pass 6 Conducted Emission Test For AC Power Port FCC Part 15.207 RSS-GEN Clause 8.8 N/A 7 Antenna Requirement FCC Part 15.203 RSS-GEN Clause 6.8 Pass Note: 1.This test report is only published to and used by the applicant, and it is not for evidence purpose in China. 2. The measurement result for the sample received is <Pass> according to < CFR 47 FCC PART 15 SUBPART C >< ISED RSS-247 > when <Accuracy Method> decision rule is applied. 3. “N/A” denotes test is not applicable in this test report. REPORT No.: 4789482405-1 Page 4 of 67 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 6 2. TEST METHODOLOGY ..................................................................................................... 7 3. FACILITIES AND ACCREDITATION ................................................................................. 7 4. CALIBRATION AND UNCERTAINTY ................................................................................ 8 4.1. MEASURING INSTRUMENT CALIBRATION .............................................................. 8 4.2. MEASUREMENT UNCERTAINTY ............................................................................... 8 5. EQUIPMENT UNDER TEST ............................................................................................... 9 5.1. DESCRIPTION OF EUT .............................................................................................. 9 5.2. MAXIMUM OUTPUT POWER...................................................................................... 9 5.3. CHANNEL LIST ........................................................................................................... 9 5.4. TEST CHANNEL CONFIGURATION ........................................................................... 9 5.5. THE WORSE CASE POWER SETTING PARAMETER ..............................................10 5.6. DESCRIPTION OF AVAILABLE ANTENNAS .............................................................10 5.7. WORST-CASE CONFIGURATIONS...........................................................................10 5.8. DESCRIPTION OF TEST SETUP ...............................................................................11 5.9. MEASURING INSTRUMENT AND SOFTWARE USED ..............................................12 6. MEASUREMENT METHODS ............................................................................................13 7. ANTENNA PORT TEST RESULTS ...................................................................................14 7.1. ON TIME AND DUTY CYCLE .....................................................................................14 7.2. 6 dB DTS BANDWIDTH AND 99% BANDWIDTH .......................................................16 7.3. PEAK CONDUCTED OUTPUT POWER .....................................................................18 7.4. POWER SPECTRAL DENSITY ..................................................................................20 7.5. CONDUCTED BANDEDGE AND SPURIOUS EMISSIONS ........................................22 8. RADIATED TEST RESULTS .............................................................................................24 8.1. RESTRICTED BANDEDGE ........................................................................................30 8.2. SPURIOUS EMISSIONS (1~3GHz) ............................................................................34 8.3. SPURIOUS EMISSIONS (3~1…

Text truncated - open the document above for the full version.

Appendix II Setup Photographs RADIATED RF MEASUREMENT SETUP (ABOVE 1 GHz) MEASUREMENT POSITION (X axis) MEASUREMENT POSITION (Y axis) MEASUREMENT POSITION (Z axis) RADIATED RF MEASUREMENT SETUP (30MHz~1GHz) RADIATED RF MEASUREMENT SETUP (Below 30MHz)