2AKCY-WWLBLEWaveLinx Lite Wallstation with Bluetooth Low Energy

WaveLinx Lite Wallstation General Information Overview The Wireless Wallstation is an integral part of the WaveLinx Lite - Commercial system and is available in three button configurations in white color. These Wallstations are line voltage (120-277VAC) powered and are fully configurable to provide wireless local and multi-level control of the lighting in an area. The Wallstations operate on a Bluetooth Mesh network. The Wallstation mounts in a standard wallbox (single or multi-gang) and is suitable for standard wall plates (not included). Each button is pre-configured to control an area and each button’s to control a lighting scene for an area and each button’s functionality can be modified using the WaveLinx Lite - Commercial Mobile Application. The Wallstation is a multi-scene, single area dimming Wallstation which provides customized light level for each area. The Wallstation provides default sequence of operations including 50% light level, scene light levels between 30-70% as well as 100% and full off. Two configurations also include raise/ lower buttons to allow further light level manual adjustment. Notes: • Each is powered by an internal universal 120-277 VAC (+/- 10%) input power supply with line, neutral, and ground. • The WaveLinx Lite Wallstation alone does not support any load switching. Supplied Parts Designed for installation into a standard single or multi- gang wiring box, each wallstation is installed in the same manner as an ordinary wall switch. Note: Before installing the unit in the junction box, please wire the wall station per the instructions listed in the “Wiring Diagram” section. Garanties et limitation de responsabilité Veuillez consulter le site www.cooperlighting.com pour obtenir les conditions générales. Énoncé de la FCC Remarque: Cet équipement a été mis à l’essai et déclaré conforme aux limites établies pour un dispositif numérique de catégorie B en vertu de la section 15 des règlements de la FCC. Ces limites sont conçues pour assurer une protection raisonnable contre toute interférence nuisible dans une installation résidentielle. Cet équipement génère, utilise et peut émettre de l’énergie radiofréquence et, s’il n’est pas installé et utilisé conformément aux instructions, peut provoquer des interférences nuisibles aux communications radio. Toutefois, il n’est absolument pas garanti qu’aucune interférence ne se produira dans une installation donnée. Si cet équipement provoque des interférences nuisibles à la réception de la radio ou de la télévision, ce qui peut être déterminé en éteignant et en rallumant l’équipement, l’utilisateur est encouragé à essayer de corriger les interférences par une ou plusieurs des mesures suivantes: • Réorientez ou déplacez l’antenne réceptrice. • Augmentez la distance entre l’équipement et le récepteur. • Branchez l’équipement sur la prise électrique d’un circuit autre que celui sur lequel le récepteur est branché. • Demandez de l’aide au distributeur ou à un technicien radio ou TV qualifié. ID du FCC (Commission fédérale des communications des États-Unis) 15 : Clause 15.21 Tout changement ou modification non expressément approuvé par la partie responsable de la conformité pourrait annuler le droit de l’utilisateur à utiliser l’équipement. Ce dispositif est conforme à la section 15 des règlements de la FCC. ID du FCC (Commission fédérale des communications des États-Unis) 15.19a Son fonctionnement est assujetti aux deux conditions suivantes : 1) cet appareil ne doit pas provoquer d’interférences nuisibles et 2) cet appareil doit accepter toutes les interférences reçues, même celles qui pourraient provoquer un fonctionnement indésirable.” ID du FCC (Commission fédérale des communications des États-Unis) 2.1093 / RSS-102 Ce produit est conforme à la limite d’exposition RF définie pour un environnement non contrôlé et est sans danger pour le fonctionnement prévu tel que décrit dans ce manuel.” ISED RSS Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. CAN ICES-3 (B)/NMB-3(B) Risque d’incendie, de décharge électrique, de coupure ou d’autres risques – L’installation et l’entretien de ce produit doivent être effectués par un électricien qualifié. Ce produit doit être installé conformément aux règles d’installation en vigueur par une personne familière avec la construction et le fonctionnement du produit ainsi qu’avec les risques inhérents. Pour une protection continue contre les décharges électriques, réinstallez tous les couvercles et protecteurs en place une fois le câblage terminé. Risque d’incendie et de décharge électrique – Assurez-vous que l’alimentation électrique est HORS TENSION avant de commencer l’installation ou de tenter d’en faire l’entretien. Mettez l’alimentation électrique hors tension au niveau du fusible ou du disjoncteur. Toutes les installations doivent être conformes au Code national de l’électricité, ainsi qu’à tous les codes nationaux et locaux. Risque de brûlure – Débranchez la source d’alimentation et laissez refroidir le luminaire avant de procéder à son entretien ou à sa manipulation. Risque de blessures – À cause des arêtes tranchantes, manipulez ce produit avec précaution. La désobéissance aux instructions suivantes représente un risque de blessures (y compris la mort) et de dommages matériels. EXONÉRATION DE RESPONSABILITÉ : Cooper LIghting Solutions n’assume aucune responsabilité pour les dommages ou pertes de quelque nature que ce soit pouvant découler d’une installation, d’une manipulation ou d’une utilisation inappropriée, imprudente ou négligente de ce produit. IMPORTANT : Lire attentivement avant d’installer le luminaire. À conserver pour consultation ultérieure. AVIS : Ce produit pe…

Text truncated - open the document above for the full version.

Cooper Lighting LLC Declaration letter We: Cooper Lighting LLC Address: 1121 Hwy 74 s., Peachtree City, GA 30269, United States Officially notify TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch that the All the models: WWL1-W, WWL1-W-CUST, WWL3-W, WWL3-W-CUST, WWL3-RL-W, WWL3-RL- WCUST, WWL5-RL-W, WWL5-RL-W-CUST. These models are the same in circuit hardware design, but their mechanical design is a little different. Such as the number of buttons or the icon of the buttons. FCC ID: 2AKCY-WWLBLE IC: 4706A-WWLBLE Yours sincerely, Company Officer: Chad Ruhala Telephone Number: 7704864168 Fax Number: 7704864168 Email: [email protected]

Cooper Lighting LLC Date (August 17, 2020) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Dear Sir or Madam, We, (Cooper Lighting LLC; Address: 1121 Hwy 74 s., Peachtree City, GA 30269, United States), hereby authorize (Henry Chen [TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch ; Address: Building12 &13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen, 518052, P.R. China; Phone: +86 755 3359 5364) to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Type of equipment: WaveLinx Lite Wallstation Model name: WWL1-W, WWL1-W-CUST, WWL3-W, WWL3-W-CUST, WWL3-RL-W, WWL3-RL-W-CUST, WWL5-RL-W, WWL5-RL-W-CUST FCC ID: 2AKCY-WWLBLE This authorization expires on (2020/10/01) Yours sincerely, Company Officer: Chad Ruhala Telephone Number: 7704864168 Fax Number: 7704864168 Email: [email protected]

Cooper Lighting LLC Date (August 17, 2020) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Confidentiality Request FCC ID: 2AKCY-WWLBLE Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, (Cooper Lighting LLC) hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation] (Cooper Lighting LLC) also hereby requests short-term confidential treatment of information accompanying this application as outlined below for a period of (180) days: Internal Photos External Photos User Manual Test Set-up Photographs The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: Chad Ruhala Telephone Number: 7704864168 Fax Number: 7704864168 Email: [email protected]

Details of: General view of WWL1-W Details of: General view of WWL1-W Details of: General view of WWL1-W Details of: General view of WWL1-W Details of: General view of WWL3-W Details of: General view of WWL3-W Details of: General view of WWL3-W Details of: General view of WWL3-W Details of: General view of WWL3-RL-W Details of: General view of WWL3-RL-W Details of: General view of WWL3-RL-W Details of: General view of WWL3-RL-W Details of: General view of WWL5-RL-W Details of: General view of WWL5-RL-W Details of: General view of all models WWL5-RL-W-CUST WWL5-RL-W WWL3-RL-W WWL3-W WWL1-W WWL3-RL-W-CUST WWL3-W-CUST WWL1-W-CUST

There are two parts of the label. Part 1: It will be printed on product for each model. Part 2：Show as below WWL1-W WWL3-RL- W WWL1-W- CUST WWL3-RL- W-CUST WWL3-W WWL5-RL- W WWL3-W- CUST WWL5-RL- W-CUST Label Location

Details of: Uncover view of WWL5-RL-W Details of: Uncover view of WWL5-RL-W Details of: Inside view of WWL5-RL-W Details of: Inside view of WWL5-RL-W Antenna Location Details of: Inside view of WWL5-RL-W Details of: Inside view of WWL5-RL-W Details of: Inside view of WWL5-RL-W

Report Number: 68.912.20.0013.01A TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 RF exposure Estimation Introduction WWL1-W, WWL1-W-CUST, WWL3-W, WWL3-W-CUST, WWL3-RL-W, WWL3-RL-W-CUST, WWL5-RL-W, WWL5-RL-W-CUST (FCC ID: 2AKCY-WWLBLE) are WaveLinx Lite Wallstation, which supports 2.4GHz Bluetooth functions inside. 1. Limit and Guidelines on Exposure to Electromagnetic Fields According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB 447498 D01 General RF Exposure Guidance v06, Mobile Portable RF Exposure, no SAR required if power is lower than the flowing threshold: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation25 • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 2. Calculation method [(max. power of` channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 Conducted Power + tune up tolerance = 4.731mW Distance = 5 mm f = 2.402 GHz [4.731/5] * SQRT(2.402) =1.47 1.47 ≤ 3.0 Therefore, excluded from SAR testing. TUV SUD China, Shenzhen Branch Reviewed by: Prepared By: Laurent Yuan/ EMC Project Manager Henry Chen/EMC Project Engineer Date: 2020-08-18 Date: 2020-08-18

Report Number: 68.912.20.0013.01 EMC_SZ_FR_23.02 FCC Release 2017-06-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng W isdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 1 of 38 FCC/ IC - TEST REPORT Report Number:68.912.20.0013.01Date of Issue:August 7, 2020 Model:WWL1-W, WWL1-W-CUST, WWL3-W, WWL3-W-CUST, WWL3-RL-W,WWL3-RL-W-CUST,WWL5-RL-W,WWL5-RL-W-CUST Product Type:WaveLinx Lite Wallstation Applicant:Cooper Lighting LLC Address:1121 Hwy 74 s.,Peachtree City, GA 30269,United States Production Facility:LEEDARSON LIGHTING CO., LTD Address:Xingda Road, Xingtai Industrial Zone, Changtai County, Zhangzhou, Fujian,China Test Result:nPositiveoNegative Total pages including Appendices:38 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. Report Number: 68.912.20.0013.01 EMC_SZ_FR_23.02 FCC Release 2017-06-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng W isdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 2 of 38 1 Table of Contents 1Table of Contents......................................................................................................................................................... 2 2Details about the Test Laboratory .............................................................................................................................. 3 3Description of the Equipment under Test ................................................................................................................... 4 4Summary of Test Standards ....................................................................................................................................... 5 5Summary of Test Results ............................................................................................................................................ 6 6General Remarks ......................................................................................................................................................... 7 7Test Setups .................................................................................................................................................................. 8 8Systems test configuration .......................................................................................................................................... 9 9Technical Requirement.............................................................................................................................................. 10 9.1Conducted Emission ......................................................................................................................................... 10 9.2Conducted Peak output power ......................................................................................................................... 15 9.36 dB Bandwidth and 99% Occupied Bandwidth .............................................................................................. 17 9.4Power spectral density ...................................................................................................................................... 20 9.5Spurious RF conducted emissions ................................................................................................................... 22 9.6Band edge .......................................................................................................................................................... 26 9.7Spurious radiated emissions for transmitter .................................................................................................... 28 10Test Equipment List ............................................................................................................................................... 37 11System Measurement Uncertainty ....................................................................................................................... 38 Report Number: 68.912.20.0013.01 EMC_SZ_FR_23.02 FCC Release 2017-06-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng W isdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 3 of 38 2 Details about the Test Laboratory Detailsabout the Test Laboratory Test Site 1 Company name: TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China FCC Registration Numbe…

Text truncated - open the document above for the full version.

Conducted Emission test Radiated Emission test of 30MHz-1GHz Radiated Emission test of 1-18GHz Radiated Emission test 18-25GHz