2AKCZ-101Wireless Network Security Appliance

• SonicWall SonicWave 231c 1 Safety and Regulatory Information TZ270W, TZ370, TZ470W Safety and Regulatory Reference Guide Regulatory Model Number: APL47-101 (TZ270W, TZ370W) APL57-0F2 (TZ470W) This document contains safety and regulatory information for the SonicWall TZ270W, TZ370W, TZ470W. The TZ270W, TZ370W, TZ470W are wireless network security appliances with an internal wireless radio that can provide wireless access on either 5GHz or 2.4GHz and supports the 802.11 ac/n/g/a/b standards. Topics: SonicWall SonicWave 231c 2 Safety and Regulatory Information Safety Information for Installation and Operation • Installation Requirements • RF Safety Distance • Cable Connections • Power Supply Information • Restricted Environments • Radio Approvals • Radio or Television Interference • Wireless Interoperability NOTE: Additional regulatory notifications and information for this product can be found online at: https://www.sonicwall.com/support/technical‐documentation TZ270W, TZ370W, TZ470W complies with FCC U‐NII New Rules. Regulatory Model/Type Product Name Installation Requirements WARNING: The following conditions are required for proper installation: APL57-101 TZ270W, TZ370W APL57-0F2 TZ470W SonicWall SonicWave 231c 3 Safety and Regulatory Information 1 Mount in a location away from direct sunlight and sources of heat. A maximum ambient temperature of 104º F (40º C) is recommended. 2 Route cables away from power lines, fluorescent lighting fixtures, and sources of noise such as radios, transmitters, and broadband amplifiers. 3 The included power cord(s) are approved for use only in specific countries or regions. Before using a power cord, verify that it is rated and approved for use in your location. 4 Ensure that no water or excessive moisture can enter the unit. 5 Allow unrestricted airflow around the unit. A minimum of 1 inch (25.44mm) clearance is recommended. 6 Consideration must be given to the connection of the equipment to the supply circuit. Appropriate consideration of equipment nameplate ratings must be used when addressing this concern. Do not overload the circuit. 7 Reliable grounding of power supply must be maintained. Particular attention must be given to power supply connections other than direct connections to the branch circuits, such as power strips. 8 When using a Fiber Optic Small-Form Pluggable (SFP) module, ensure it is IEC 60825 certified and a Class 1 Laser Product. 9 This equipment is not intended for use at workplaces with visual display units, in accordance with §2 of the German ordinance for workplaces with visual display units. To avoid incommoding reflections at visual display workplaces, this device must not be placed in the direct field of view. RF Safety Distance The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co‐located or operating in conjunction with another antenna or transmitter Cable Connections All Ethernet and RS232 (Console) cables are designed for intra‐building connection to other equipment. Do not connect these ports directly to communication wiring or other wiring that exits the building where the appliance is located. Lithium Battery Warning The Lithium Battery used in the SonicWall security appliance may not be replaced by the user. Return the SonicWall security appliance to a SonicWall-authorized service center for replacement with the same or equivalent type recommended by the manufacturer. If, for any reason, the battery or SonicWall security appliance must be disposed of, do so following the battery manufacturer's instructions. Power Supply Information If the power supply is missing from your SonicWall product package, contact SonicWall Technical Support at https://support.sonicwall.com/contact-support for a replacement. This product should only be used with a UL listed power supply marked “I.T.E. LPS,” with an output rated 12V DC, minimum 3.0 A, Tma: minimum 40 degrees C. SonicWall SonicWave 231c 4 Safety and Regulatory Information Restricted Environments The SonicWall wireless device, like other radio devices, emits radio frequency electromagnetic energy. The SonicWall wireless device operates within the guidelines found in radio frequency safety and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of the SonicWall wireless device may be restricted by the proprietor of the building or responsible representatives of the applicable organization. Examples of such situations include the following: • Using the SonicWall wireless device equipment on board airplanes, or • Using the SonicWall wireless device equipment in any other environment where the risk of interference with other devices or services is perceived or identified as being harmful. If you are uncertain of the policy that applies to the use of wireless devices in a specific organization or environment (an airport, for example), you are encouraged to ask for authorization to use the SonicWall wireless device before you turn it on. WARNING: Explosive Device Proximity Warning: Do not operate a portable transmitter (such as a wireless network device) near unshielded blasting caps or in an explosive environment unless the device has been modified to be qualified for such use. WARNING: Use on Aircraft Caution: Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their signals could interfere with critical aircraft instruments. Radio Approvals It is important to ensure that you only use your radio device in countries where the device is approved for use. To determine whether you are allowed to use your wireless network device in a specific country, check to see if the radio type number that is printed on the id…

Text truncated - open the document above for the full version.

1 Package Contents NOTE: The included power cord is approved for use only in specific countries or regions. Before using a power cord, verify that it is rated and approved for use in your location. The power cord is for AC mains installation only. Refer to the TZ270/TZ370/TZ470 Series Safety, Regulatory, and Legal Information document for minimum power cord rating and additional safety information. メモ: 添付の電源コードに関して電気安全を確保するために、弊社製品にご使用い ただく電源コードは必ず製品同梱の電源コードをご使用ください。この電源コー ドは他の製品では使用できません。 Items missing? Contact SonicWall Technical Support at: https://www.sonicwall.com/support/contact-support TZ Series appliance Antennas (2) (Wireless TZs only) Ethernet cable 12VDC/36W Power adapter Power cord SonicWall TZ270/TZ370/TZ470 Series Quick Start Guide Safety, Environmental, and Regulatory Information documents 2 Front Panels The wired and wireless TZs for each model have the same ports and LEDs, except that the wireless TZs have an additional W0 WLAN LED. Front Panel Ports and LED Descriptions U0 U0 Port: USB 3.0 SuperSpeed (SS) Port for WWAN SS USB SS 3.0 Port: For Configuration, Recovery, Re-imaging the TZ Power LED: Blue = Powered on, Yellow = Defective adapter Te s t L E D: Yellow = Initializing, Blinking Yellow = SafeMode Security LED: Green = All Security Services Licensed, Blinking Yellow = Security Services License Expired Security Services monitored by this LED: Gateway Anti-Virus, Intrusion Prevention, Anti-Spyware Storage LED: Solid Green = Extended Storage module present, Blinking Green = Activity, Yellow = Storage warning Wireless W0 WLAN LED (Wireless TZs only): Solid Green = Wireless radio is active, Blinking Green = Activity X0 LAN/MGMT X0 Port LED: Solid Green = 1G link, Blinking Green = 1G activity X1 / X2 WAN X1 and X2 Port LEDs: Solid Green = 1G link, Blinking Green = 1G activity X0 – X7 RJ45 Port LEDs: Solid Green = 1G link, Blinking Green = 1G activity X8 / X9 SFP/SFP+ Port LEDs (TZ470/TZ470W only): Solid Orange = 2.5G link, Blinking Orange = 2.5G activity U0 WWAN LEDs for USB 5G/LTE: Green = 5G/LTE signal strength 3 Back Panels SSD Storage Module – The TZ supports an optional, field- upgradable SSD Storage Module, accessible via a removable panel on the bottom of the appliance. To order, refer to the price list for available SKUs. Grounding Screw SafeMode Button: Press and hold until Test LED starts blinking to set the TZ into SafeMode Power Input: 36W 100~240VAC - 12VDC power adapter X0 LAN RJ45 Port: 1 Gbps X1 WAN RJ45 Port: 1 Gbps X2 WAN RJ45 Port: 1 Gbps X3 RJ45 Port: 1 Gbps X4/X5/X6/X7 RJ45 Ports: 1 Gbps SFP/SFP+ Ports X8/X9 – (TZ470/TZ470W only): 2.5 / 1 Gbps RJ45 Console Port SonicWall ® TZ270/TZ270W, TZ370/TZ370W, and TZ470/TZ470W Quick Start Guide Regulatory Model NumbersProduct Names APL57-100TZ270/TZ370 APL57-101TZ270W/TZ370W APL57-0F1TZ470 APL57-0F2TZ470W 232-005484-50_RevA_TZ270-370-470_Series_QuickStartGuide.fm Page 1 Tuesday, October 20, 2020 11:40 AM 4 Mounting Options Flat Surface Option Place the TZ on a flat surface. Allow unrestricted airflow around the unit, leaving a minimum of 1 inch (25.44mm) clearance on all sides. 5 Connectivity and Power 1. Connect Power 2. C onnect Interfaces For a wireless TZ, connect the antennas to your TZ. Connect the TZ WAN interface (X1 or X2) to the Internet. CAUTION: Only use the power adapter included with this appliance. Do not use a power adapter that is damaged or from another appliance. 6 Setup Options Setup using Local Management Set up and manage your TZ by connecting it to a management computer via Ethernet cable. To minimize scrolling, set your screen resolution to at least 1920 x 1080 pixels. Setup using Cloud Management Use SonicWall Capture Security Center (CSC) with Zero Touch to manage and configure your TZ. Setup using SonicExpress App Use SonicWall SonicExpress on your smartphone to register and configure your TZ. NOTE: After initial setup, be sure to download the latest firmware from MySonicWall and upgrade your TZ. 7 Local Management 1 Connect the TZ LAN interface (X0) to your computer. Your computer should be configured to accept DHCP addressing. 2Navigate to https://192.168.168.168 in your web browser and log in with the default credentials: 3Username: admin Password: password 4 Launch the Setup Guide wizard or manually configure to complete initial configuration. 5 In SonicOS, click Register and log in with your MySonicWall credentials to register your TZ. Your TZ is now initialized and ready for use! 8 Cloud Management Use Capture Security Center (CSC) with Zero Touch to manage and configure your TZ. 1 Log into CSC at cloud.sonicwall.com using your MySonicWall credentials. 2 Select the mySonicWall tile to register your TZ. 3 Enable Zero Touch and NSM licensing on your TZ in MySonicWall. 4 Select the Network Security Manager tile in CSC to manage your TZ from the cloud. NOTE: This option requires a Cloud Management license. 9 SonicExpress App Use SonicExpress on your smartphone to register and configure your TZ. 1 Download and launch the SonicExpress App on your iOS or Android device. 2Tap Login and log in with your MySonicWall credentials, then select the Tenant for the TZ. Tenants can contain multiple SonicWall appliances. 3 Connect your iOS/Android device to the TZ with the smartphone USB cable (not supplied with the TZ). 4Use the SonicExpress Se tup Guide to register the TZ, synchronize service licenses, change the password, and configure essential interface settings. 10 Secure SD-Branch SD-Branch combines SD-WAN, SD-LAN, unified security and centralized management for distributed enterprises. For more information, see: https://www.sonicwall.com/solutions/use-cases/secure-sd-branch NOTE: Use your mobile device USB cable. 232-005484-50_RevA_TZ270-370-470_Series_QuickStartGuide.fm Page 2 Tuesday, October 20, 2020 11:40 AM

1033 McCarthy Boulevard, Milpitas, California 95035 USA Office +1-888-557-6642 Date: October 26, 2020 We, SonicWall Inc. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: 2AKCZ-101 If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Sincerely yours, ----------------------------------- Rick Linford / Regulatory Engineer Telephone Number: +1408.962.8798 Fax Number: +1 408.962.8798 E-mail Address: [email protected]

Date: 2020-10-26 FCC ID: 2AKCZ-101 A U T H O R I Z A T I O N L E T T E R To Whom It May Concern: SonicWall Inc. hereby authorizes Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for SonicWall Regulatory Model APL57-0F2 and APL57-101 Wireless Network Security Appliance authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Supervisor of BV CPS Taoyuan on SonicWall Inc.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Rick Linford / Regulatory Engineer Telephone Number: +1408.962.8798 Fax Number: +1 408.962.8798 E-mail Address: [email protected]

Reference No.: 200717C08 Page No. 1 / 22 CONSTRUCTION PHOTOS OF EUT Model: APL57-0F2 Reference No.: 200717C08 Page No. 2 / 22 Reference No.: 200717C08 Page No. 3 / 22 Reference No.: 200717C08 Page No. 4 / 22 Reference No.: 200717C08 Page No. 5 / 22 Reference No.: 200717C08 Page No. 6 / 22 Reference No.: 200717C08 Page No. 7 / 22 Reference No.: 200717C08 Page No. 8 / 22 Reference No.: 200717C08 Page No. 9 / 22 Reference No.: 200717C08 Page No. 10 / 22 Reference No.: 200717C08 Page No. 11 / 22 Reference No.: 200717C08 Page No. 12 / 22 Model: APL57-101 Reference No.: 200717C08 Page No. 13 / 22 Reference No.: 200717C08 Page No. 14 / 22 Reference No.: 200717C08 Page No. 15 / 22 Reference No.: 200717C08 Page No. 16 / 22 Reference No.: 200717C08 Page No. 17 / 22 Reference No.: 200717C08 Page No. 18 / 22 Reference No.: 200717C08 Page No. 19 / 22 Reference No.: 200717C08 Page No. 20 / 22 Reference No.: 200717C08 Page No. 21 / 22 Reference No.: 200717C08 Page No. 22 / 22

Label Location

XXX-XXXXXX R CCAIXXLPXXXXX CMIIT ID:XXXVVXXX “Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.” 5C5C5C5C5C5C C5C5-C5C5 FCC ID: 2AKCZ-101 IC:22137-101 無線網路安全設備 Made in Taiwan/台灣製造 台湾制造 X-XXXXX SONICWALL SONICWALL Serial Number: Authentication Code: Model/型號:APL57-101 V/額定電壓:12 V A/額定電流:3.0 A CAN ICES-3 (B)/NMB-3(B) ASSY:101-500XXX-50 Rev. X LBL PN:341-000047-XX A SonicWall International Ltd. City Gate Park, Mahon,Cork,Ireland www.sonicwall.com This device complies with Par t 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interfer ence, and 2) this device must accept any interfer ence received, including interfer ence that may cause undesired operation. 10 产品型号: TZ270W D3B337 RoHS 无线网络安全设备 TZ270W 额定电压: 12 V 额定电流: 3.0 A XXXXX-XX-XXXXX 5GHz [email protected] 制造商: SonicWall Inc.

Reference No.: 200717C08 Page No. 1 / 16 CONSTRUCTION PHOTOS OF EUT Model: APL57-0F2 Reference No.: 200717C08 Page No. 2 / 16 Reference No.: 200717C08 Page No. 3 / 16 Reference No.: 200717C08 Page No. 4 / 16 Reference No.: 200717C08 Page No. 5 / 16 Reference No.: 200717C08 Page No. 6 / 16 Reference No.: 200717C08 Page No. 7 / 16 Reference No.: 200717C08 Page No. 8 / 16 Reference No.: 200717C08 Page No. 9 / 16 Model: APL57-101 Reference No.: 200717C08 Page No. 10 / 16 Reference No.: 200717C08 Page No. 11 / 16 Reference No.: 200717C08 Page No. 12 / 16 Reference No.: 200717C08 Page No. 13 / 16 Reference No.: 200717C08 Page No. 14 / 16 Reference No.: 200717C08 Page No. 15 / 16 Reference No.: 200717C08 Page No. 16 / 16

Report No.: SA200717C08 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA200717C08 FCC ID: 2AKCZ-101 Test Model: APL57-0F2, APL57-101 (refer to section 1 for more details) Received Date: Jul. 17, 2020 Date of Evaluation: Sep. 30, 2020 Issued Date: Oct. 08, 2020 Applicant: SonicWall Inc. Address: 1033 McCarthy Blvd., Milpitas, CA 95035, USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA200717C08 Page No. 2 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power ........................................................................... 6 Report No.: SA200717C08 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA200717C08 Original release. Oct. 08, 2020 Report No.: SA200717C08 Page No. 4 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Wireless Network Security Appliance Brand: SONICWALL Test Model: APL57-0F2, APL57-101 Sample Status: Engineering sample Applicant: SonicWall Inc. Standards: FCC Part 2 (Section 2.1091) References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.3 -2002 Note: 1. The following models are provided to this EUT. (a) The EUT using the same PCB Layout. (b) Due to series models, the parts are different as below: Model APL57-0F2 APL57-101 PSE Out N/A N/A Copper Ports x8 GbE x8 GbE SFP Ports x2 SFP (Max: 2.5Gbps) NO mPCIe WiFi Module 2x2 11ac Wave 2 (Module) 2x2 11ac Wave 2 (Module) WiFi SPEC 2.4G+5G 11ac+abgn support Beamforming 2.4G+5G 11ac+abgn support Beamforming ANT for WiFi x2 ANTs (EXT) x2 ANTs (EXT) Console (RJ45) YES YES USB Port 3.0 x2 3.0 x2 FAN(s) YES YES Outer covering Metal Metal CPU 1.4GHz 1.2GHz The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Oct. 08, 2020 Vera Huang / Specialist Approved by : , Date: Oct. 08, 2020 Dylan Chiou / Senior Project Engineer Report No.: SA200717C08 Page No. 5 / 6 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20m away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA200717C08 Page No. 6 / 6 Report Format Version: 6.1.1 3 Calculation Result of Maximum Conducted Power Frequency Band (MHz) Max Average Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) CDD mode WLAN 2412~2462 23.53 6.20 20 0.187 1 WLAN 5180~5240 21.43 8.86 20 0.213 1 WLAN 57…

Text truncated - open the document above for the full version.

Report No.: RF200717C08 Page No. 1 / 78 Report Format Version: 6.1.1 FCC Test Report Report No.: RF200717C08 FCC ID: 2AKCZ-101 Test Model: APL57-0F2, APL57-101 (refer to item 3.1 for more details) Received Date: Jul. 17, 2020 Test Date: Aug. 24, 2020 ~ Sep. 25, 2020 Issued Date: Oct. 08, 2020 Applicant: SonicWall Inc. Address: 1033 McCarthy Blvd., Milpitas, CA 95035, USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RF200717C08 Page No. 2 / 78 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ........................................................................................................................... 5 2 Summary of Test Results ........................................................................................................................... 6 2.1 Measurement Uncertainty ..................................................................................................................... 6 2.2 Modification Record .............................................................................................................................. 6 3 General Information ................................................................................................................................... 7 3.1 General Description of EUT .................................................................................................................. 7 3.2 Description of Test Modes ..................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail .................................................................. 10 3.3 Duty Cycle of Test Signal .................................................................................................................... 12 3.4 Description of Support Units ............................................................................................................... 13 3.4.1 Configuration of System under Test ......................................................................................... 13 3.5 General Description of Applied Standards and References ............................................................... 14 4 Test Types and Results ............................................................................................................................ 15 4.1 Radiated Emission and Bandedge Measurement .............................................................................. 15 4.1.1 Limits of Radiated Emission and Bandedge Measurement ..................................................... 15 4.1.2 Test Instruments ....................................................................................................................... 16 4.1.3 Test Procedures ........................................................................................................................ 17 4.1.4 Deviation from Test Standard ................................................................................................... 18 4.1.5 Test Set Up ............................................................................................................................... 18 4.1.6 EUT Operating Conditions ........................................................................................................ 19 4.1.7 Test Results .............................................................................................................................. 20 4.2 Conducted Emission Measurement .................................................................................................... 34 4.2.1 Limits of Conducted Emission Measurement ........................................................................... 34 4.2.2 Test Instruments ....................................................................................................................... 34 4.2.3 Test Procedures ........................................................................................................................ 35 4.2.4 Deviation from Test Standard ................................................................................................... 35 4.2.5 Test Setup ....................................................…

Text truncated - open the document above for the full version.

FCC ID: 2AKCZ-101 IC: 22137-101 1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST FCC ID: 2AKCZ-101 IC: 22137-101 2 RADIATED EMISSION TEST BELOW 1GHz (X-Plane) FCC ID: 2AKCZ-101 IC: 22137-101 3 RADIATED EMISSION TEST BELOW 1GHz (Y-Plane) FCC ID: 2AKCZ-101 IC: 22137-101 4 RADIATED EMISSION TEST ABOVE 1GHz (X-Plane) FCC ID: 2AKCZ-101 IC: 22137-101 5 RADIATED EMISSION TEST ABOVE 1GHz (Y-Plane)