2AL5Y-S2000CRechargeable Toothbrush

1MIN 2MIN GET STARTED Sync up t o the app f or personalised insights and coaching 1. CHARGE YOUR TOOTHBRUSH 5. TURN YOUR BRUSH OFF 2. SYNC YOUR TOOTHBRUSH Download the Colgate Connect app and make sure the Bluetooth® is t urned on. Create your profile and sync y our toothbrush every 10 days t o view your f ull brushing analysis and collect smile rewards. The Smile light will flash blue when it recognises the brush during the connection process. 4. SMILE COACHING & SMART TECHNOLOGY Be guided by the app or the smart brush 2 minute light-up timer: Each quadrant at the bottom of the brush lights up white every 30 seconds to guide your brushing pace for a complete 2 minute clean Pressure sensor: Detects over brushing by flashing red to indicate when to lighten your brushing style A handy tip to remember the modes is that the length of the line represents the vibration strength. The shorter the line = the more gentle. remain in standby mode for 20 seconds. You can take a quick break and if you resume brushing within the 20 second period your 2 minute brushing streak will not be impacted. After 20 seconds in standby mode the 6. MAKE YOUR BRUSH SMILE 3. TURN IT ON AND FIND YOUR BRUSHING RHYTHM Note: When charging the brush, the smile light will pulse in dark teal if you’re in a healthy brushing rhythmn and pulse white if not. SERIES 2SERIES 2 Hi there, let’s get to know each other CLEANING INSTRUCTIONS Clean your toothbrush head thoroughly after each use by gently pulling the brush head from the handle and rinsing under running water. Regularly clean the handle and charging base of the toothbrush using a damp cloth. This is especially important if y our t oothpaste contains baking soda or other bicarbonates or peroxide. Otherwise, plastic cr acking could occur. STORAGE INSTRUCTIONS AND DEVICE MAINTENANCE The following maintenance instructions are important to ensure that your brush continues to work as it was designed. Failure to follow these instructions may cause your device to stop functioning altogether. If you plan to stop using the toothbrush for an extended period, we recommend that you unplug the charging base, clean the toothbrush handle and heads, and store them in a cool dark place. If you start using your toothbrush again after a long period of non-use, place it on the charger for a latest 10 hours. ELECTROMAGNETIC COMPATIBILITY The Colgate electric t oothbrush complies with all standards r egarding electromagnetic fields. It is safe to use if handled properly according to the instructions provided in this manual. BLUETOOTH ® The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and are used under license. CHARGING BASE Input 5Vdc, 0.4A HANDLE Model S2000C NOTICE For energy savings purposes, charge only when the battery level is low. When not in use, keep the charger unplugged from the socket. We'r e committed to reimagining a healthier f uture for all people, pets and planet through the commitments we make to sustainability and social impact - and the actions we take. We've partnered with TerraCycle to make recycling your Electric Toothbrush easy! To learn how visit https:/ /www.colgate.com/electrical INSTRUCTIONS HOW TO RECYCLE YOUR ELECTRIC TOOTHBRUSH WARRANTY IMPORTANT SAFEGUARDS When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following: SAVE THESE INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING WARNING • This toothbrush can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the toothbrush in a safe way and understand the hazards involved. Not suitable for children under 8. Keep out of reach of small children. • Cleaning and user maintenance shall not be made by children without supervision. • Children shall not play with the appliance. • Use only a certified AC Adapter or other USB power source with USB outlet and output voltage rating 5Vdc and output current rating of at least 250mA. • USB power sources must only be used in dry locations away from water. • Stop using this t oothbrush if it is damaged in any way (cord,brush head, toothbrush handle, charger and/or user provided AC adapter). • Use this product only f or it s intended use as described in this manual. Do not use brush heads, charger, or attachments not recommended b y C olgate. • Keep c ord away f rom heated surfaces. • Use the charger only within rated capacit y of outlets or v oltages specified. • No user serviceable parts. Do not disassemble the handle except f or battery disposal, as it may c ause personal injury or device failure. • If after using this t oothbrush you experience excessive bleeding or if bleeding continues t o occur after a week of us e, please contact y our dentist as it may be an indication of a more serious oral care issue. • If y ou are undergoing treatment f or any oral care condition, consult y our dental professional prior t o use. • Do not place or s tore product where it c an fall or be pulled into a tub or sink. • Do not r each for a charger that has f allen into water . Unplug immediately. • Chargers and user provided AC adapter should always be completely dry when connecting to power . Replaceable head Amplify your smile with any Col gate Pulse expert designed brush heads Keep it fresh by replacing your brush head every 3 months as recommended by dental professionals Smart-Sonic technology For a smarter and superior clean* Fin d your brushing rhythm with 3 modes Gentle Clean, Daily Clean, Deep Clean Smile Light Indicator Make your brush smile when you hi t daily brushing goals or get into a healthy multi-day brushing rhythm 2 Minute li ght-up timer and quadrant pacer White light guides your pace every 30 seconds for a complete clean Pressure Sensor Red light indicates when to lighten your brushing…

Text truncated - open the document above for the full version.

COLGATE-PALMOLIVE COMPANY 909 River Road Daniel Roman, N.C.E. Piscataway, NJ 08855-1343 Product Compliance Manager Telephone: +1 732-878-7609 Global Product Safety Email: [email protected] August 18, 2022 UL LLC 12 Laboratory Dr. Research Triangle Park, NC 27709 USA To whom it may concern: I, the undersigned, hereby authorize UL LLC to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL LLC as our representative, we still recognize that we are responsible to: a) fulfill the requirements for the scope of certification requested, including implementing any appropriate changes requested by UL Verification Services Telecommunications Certification Body (TCB) and / or the FCC; b) supply any and all information needed for the evaluation of the products for which certification is sought; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) not use our product certification in such a manner as to bring the TCB or FCC into disrepute and to not make any statement regarding product certification which the TCB or FCC may consider misleading or unauthorized; e) discontinue use of all advertising matter that contains any reference thereto and complies with any and all actions required by the FCC upon suspension or cancellation of certification; f) use certification only to indicate that products are certified in conformity with specified standards; g) endeavor to ensure that no certificate or report or any part thereof is used in a misleading manner, and any copies of the grants/certificates shall be reproduced in their entirety; h) comply with the requirements of the TCB and FCC, including the use of marks and label information prescribed for the scope of certification, when making reference to product certification in communication media such as documents, brochure or advertisements; i) comply with the requirements for certification, supply any information needed for evaluation of products to be certified and, where applicable, make provision for the participation of observers; j) ensure that products marketed under the scope of the requested certification continue to comply with the certification requirements; k) provide a sample of a production unit for testing within 30 days of the request should this product be selected as part of either the TCB’s or the FCC’s market surveillance requirements; l) keep a record of all complaints relating to product’s compliance with requirements of relevant standard; make records available to UL or FCC when requested; take appropriate action with respect to such complaints and any deficiencies found in the product that affect compliance with requirements for certification; document the actions taken with respect to complaints and/or deficiencies; m) inform the TCB immediately of any changes that may affect its ability to comply with the certification requirements. This authorization is valid until further written notice from the applicant. Regards, Dan Roman Product Compliance Manager

COLGATE-PALMOLIVE COMPANY 909 River Road Daniel Roman, N.C.E. Piscataway, NJ 08855-1343 Product Compliance Manager Telephone: +1 732-878-7609 Global Product Safety Email: [email protected] January 12, 2023 Attn: FCC Office of Engineering and Technology / UL Verification Services TCB Subject: Request for Confidentiality FCC IDs: 2AL5Y-A2000C and 2AL5Y-S2000C To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. • Schematic Diagram • Block Diagram • Theory of Operation • PCB Layout • Parts List Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until May 1, 2022. • External Photos • Internal Photos • Test Setup Photos • User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Regards, Dan Roman Product Compliance Manager

PAD PRINT FINISH: MATTE COLOR: CP0710901 KENT Ink TP218 79/14 Silver PAD PRINT FINISH: GLOSS COLOR: MATCH TO E2 SILVER PAINT BLACKBIRD STAR HANDLE: PRODUCT GRAPHIC REV.01 laser etched Date Code LASER ETCHED or PAD PRINT FINISH: GLOSS COLOR: MATCH TO E2 SILVER PAINT FCCID:2AL5Y-S2000C

FCC Part 1 Subpart I FCC Part 2 Subpart J RF EXPOSURE REPORT FOR RECHARGEABLE TOOTHBRUSH MODEL NAME: S2000C FCC ID: 2AL5Y-S2000C REPORT NUMBER: R14516988-S2 ISSUE DATE: 2022-10-07 Prepared for COLGATE-PALMOLIVE COMPANY 909 RIVER ROAD PISCATAWAY, NJ 08855 Prepared by UL LLC 12 LABORATORY DR. RESEARCH TRIANGLE PARK, NC 27709 USA TEL: (919) 549-1400 REPORT NO: R14516988-S2 DATE: 2022-10-07 FCC ID: 2AL5Y-S2000C Page 2 of 7 UL LLC FORM NO: 03-EM-F00858 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC. . REVISION HISTORY Rev. Issue Date Revisions Revised By V1 2022-09-30 Initial Issue B. Kiewra V2 2022-10-07 Revised declared power B. Kiewra REPORT NO: R14516988-S2 DATE: 2022-10-07 FCC ID: 2AL5Y-S2000C Page 3 of 7 UL LLC FORM NO: 03-EM-F00858 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC. . TABLE OF CONTENTS REVISION HISTORY ................................................................................................................. 2 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. REFERENCES ................................................................................................................... 5 4. FACILITIES AND ACCREDITATION ................................................................................. 5 5. DECISION RULES AND MEASUREMENT UNCERTAINTY .............................................. 6 5.1. METROLOGICAL TRACEABILITY .............................................................................. 6 5.2. DECISION RULES ....................................................................................................... 6 6. DEVICE UNDER TEST ....................................................................................................... 6 7. STANDALONE SAR TEST EXCLUSION CONSIDERATIONS .......................................... 7 7.1. FCC ............................................................................................................................. 7 END OF TEST REPORT ........................................................................................................... 7 REPORT NO: R14516988-S2 DATE: 2022-10-07 FCC ID: 2AL5Y-S2000C Page 4 of 7 UL LLC FORM NO: 03-EM-F00858 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC. . 1. ATTESTATION OF TEST RESULTS COMPANY NAME: Colgate-Palmolive Company 909 River Road Piscataway, NJ 08855 EUT DESCRIPTION: Rechargeable Toothbrush MODEL: S2000C SERIAL NUMBER: Non-Serialized SAMPLE RECEIPT DATE: 2022-09-29 DATE TESTED: 2022-09-29 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Complies UL LLC tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. All samples tested were in good operating condition throughout the entire test program. Measurement Uncertainties are published for informational purposes only and were not taken into account unless noted otherwise. This document may not be altered or revised in any way unless done so by UL LLC and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL LLC will constitute fraud and shall nullify the document. Approved & Released For UL LLC By: Prepared By: Michael Antola Brian Kiewra Staff Engineer Project Engineer Consumer, Medical, and IT Segment Consumer, Medical, and IT Segment UL LLC UL LLC REPORT NO: R14516988-S2 DATE: 2022-10-07 FCC ID: 2AL5Y-S2000C Page 5 of 7 UL LLC FORM NO: 03-EM-F00858 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC. . 2. TEST METHODOLOGY All calculations were made in accordance with FCC Parts 1.1310, 2.1091, 2.1093, KDB 447498 D01 v06, KDB 447498 D03 V01, IEEE Std C95.1-2005, and IEEE Std C95.3-2002. This report contains data provided by the customer which can impact the validity of results. UL LLC is only responsible for the validity of results after the integration of the data provided by the customer 3. REFERENCES Output power, Duty cycle and Antenna gain data is excerpted from the applicable client declarations. 4. FACILITIES AND ACCREDITATION UL LLC is accredited by A2LA, certification # 0751.06, for all testing performed within the scope of this report. Testing was performed at the locations noted below. Address ISED CABID ISED Company Number FCC Registration ☐ Building: 12 Laboratory Dr RTP, NC 27709, U.S.A US0067 2180C 825374 ☒ Building: 2800 Perimeter Park Dr. Suite B Morrisville, NC 27560, U.S.A 27265 REPORT NO: R14516988-S2 DATE: 2022-10-07 FCC ID: 2AL5Y-S2000C Page 6 of 7 UL LLC FORM NO: 03-EM-F00858 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC. . 5. DECISION RULES AND MEASUREMENT UNCERTAINTY 5.1. METROLOGICAL TRACEABILITY The measuring equipment utilized to perform the tests documented in this report has been calibrated in accordance with the manufacturer's recommendations, and is traceable to recognized national standards. 5.2. DECISION RULES For all tests where the applicable U LAB <= U MA…

Text truncated - open the document above for the full version.

深圳市麦捷微电子科技股份有限公司 地址：深圳市宝安区观澜镇高尔夫大道裕兴路 电话(Tel)：0755-28085000 传真(Fax)：0755-28085605 邮编(Postcode)：518110 1 仕样书编号 NO.: QW-QA-332 REV1.0 CUSTOMER: 日期 DATE: 纳入仕样书 SPECIFICATION 产 品 名 称PRODUCT NAME: 叠层片式天线 Multilayer Chip Antenna 贵 司 料 号YOUR PART NO.: 敝 司 料 号OUR PART NO.: MGMA3216H2450-A02 本纳入仕样书共13页 MANUFACTURING NAME 深圳市麦捷微电子科技股份有限公司 SHENZHEN MICROGATE TECHNOLOGY CO.，LT D TEL：86-755-28085000 FAX：86-755-28085605 接受RECEPTION THE SPECIFICATION HAS BEEN ACCEPTED. 该纳入仕样书已被我司接受 日期: DATE： 公司： COMPANY： 批准 CFMD 审核 CHKD 接收 RCVD CFMD. 批准 CHKD. 审核 DSGD. 担当 罗盛滔 胡潞乐 曾艳锋 深圳市麦捷微电子科技股份有限公司 地址：深圳市宝安区观澜镇高尔夫大道裕兴路 电话(Tel)：0755-28085000 传真(Fax)：0755-28085605 邮编(Postcode)：518110 2 目录CATALOG 1 适用范围 Scope．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 3 2 品名构成 Product Identification．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 3 3 形状、尺寸Appearance and Dimensions．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 3 4 测试电路及测试条件 Testing Conditions．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 3 5 电气性能 Electrical Characteristics．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 4 6 特性曲线 Characteristic curve．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．5 7 信赖性试验 Reliable Performance．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 6 8 焊接条件 Recommended Soldering Conditions．．．．．．．．．．．．．．．．．．．．．．．．．．．．．8 9 包装 Packaging．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 9 10 装箱清单及标志 Packing documents and marking．．．．．．．．．．．．．．．．．．．．．． 10 11 保管 Storage．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 12 APPENDIX A 纳入仕样书改定履历 Modify History of Specification ．．．．．．．．．．．．．．．．．．．．．．．．． 13 深圳市麦捷微电子科技股份有限公司 地址：深圳市宝安区观澜镇高尔夫大道裕兴路 电话(Tel)：0755-28085000 传真(Fax)：0755-28085605 邮编(Postcode)：518110 3 1 适用范围Scope "麦捷"微波叠层片式介质天线 MGMA 系列产品，设计用于WLAN、HomeRF、Bluetooth、Module等， 小体积SMD片式设计。 "Microgate" Microwave Multilayer Chip Antenna series are designed to be used in WLAN、HomeRF、 Bluetooth、Module、etc，small size SMD chip design. 2 品名构成Product Identification MGMA 3216 H 2450 -A02 3 形状、尺寸Appearance and Dimensions 4 测试电路及测试条件 Test Circuit and Testing Conditions Unit：mm 中心频率/ Center Frequency: 2450MHz 结构：过孔设计 产品尺寸：3.2×1.6×1.2 S型 多层结构天线/Multi-layer Chip Antenna 标准规格，编号:A02/Normaling Type: A02 深圳市麦捷微电子科技股份有限公司 地址：深圳市宝安区观澜镇高尔夫大道裕兴路 电话(Tel)：0755-28085000 传真(Fax)：0755-28085605 邮编(Postcode)：518110 4 除非另有规定，否则在以下条件下测试 <Unless otherwise specified> 温度Temperature : Ordinary Temperature (5 to 35°C) 湿度Humidity : Ordinary Humidity (25 to 85% RH) 大气压强Atmospheric Pressure : 86 to 106 kPa 当对测量结果有疑问时<In case of doubt> 温度Temperature : 20±2°C 湿度Humidity : 55 to 75% RH 大气压强Atmospheric Pressure : 86 to 106 kPa 5 电气性能Electrical Characteristics 操作温度范围Operating Temperature Range : -40 to +85°C 保存温度范围 Storage Temperature Range : -40 to +85°C No. Item （项目） Specifications （特性） Central Frequency 中心频率 (No matching) 3500MHz 1 (带匹配电路测试)After Matching 2450 MHz Band Width 通带宽度(No matching) 200 MHz ( 3400～3600MHz ) 2 (带匹配电路测试)After Matching 100 MHz ( 2400～2500MHz ) 3 Gain 增益 0～2 dBi 4 V.S.W.R (in BW) 驻波比 ≤2.0 5 Polarization 极化方式 Linear 线性 6 Azimuth Beam width 方位角 Omni-directional 全向 7 Impedance 阻抗 50 Ω 深圳市麦捷微电子科技股份有限公司 地址：深圳市宝安区观澜镇高尔夫大道裕兴路 电话(Tel)：0755-28085000 传真(Fax)：0755-28085605 邮编(Postcode)：518110 5 6 特性曲线Characteristic curve 1）Before Matching 2) After Matching 深圳市麦捷微电子科技股份有限公司 地址：深圳市宝安区观澜镇高尔夫大道裕兴路 电话(Tel)：0755-28085000 传真(Fax)：0755-28085605 邮编(Postcode)：518110 6 7 信赖性试验Reliable Performance NO. Item Specifications Test Methods 焊锡Solder: Sn: Pb= 100:0 焊锡温度Temperature: 255°C+5°C/-0°C 助焊剂 Flux: 松香rosin 7-1 Solder- Ability 可焊性 More than 90% of termination should be covered with new solder. 端电极焊锡覆盖率为 90%以上。 浸渍时间Duration: 5±0.5s 焊锡Solder: Sn: Pb= 100:0 焊锡温度Temperature: 270°C+2°C/-0°C 助焊剂 Flux: 松香rosin 7-2 Leaching Resistance 耐焊性 More than 75% of termination Should be covered with new solder. 端电极焊锡覆盖率为 75%以上 浸渍时间Duration: 10±0.5s 7-3 Terminal Strength 端头强度 The terminal and body should be no damage 端头和瓷体不应见损伤 The device should not be broken after tensile force of 1.0kg is slowly applied to pull a lead pin of the fixed device in the lead axis direction for 10±1 seconds. 在产品电极端子上或表面上应能承受1kg垂直拉力10±1秒 7-4 Bending Strength 弯曲试验 No mechanical damage should be noticed 不应见机械损伤 Weld the product to the center part of the PCB with the thickness 1.6±0.2mm as the illustration shows, and keep exerting force arrow-ward on it at speed of: 1mm/S, and hold for 5±1S at the position of 1.5mm bending distance, so far, any peeling off of the product metal coating should not be detected. 将产品按图焊在1.6±0.2mm的 PCB 板中间，由箭头方向施力 1mm/S，弯曲距离1.5mm，保 持5±1S，产品金属层无脱落。 深圳市麦捷微电子科技股份有限公司 地址：深圳市宝安区观澜镇高尔夫大道裕兴路 电话(Tel)：0755-28085000 传真(Fax)：0755-28085605 邮编(Postcode)：518110 7 NO. Item Specifications Test Methods 7-5 Drop 跌落 Drop 10 times on a concrete floor from a height of 1m. 从距混凝土地面1m高度自由落下，重复3次。 7-6 Vibration 振动 频率Frequency: 10 to 55Hz 振幅Amplitude: 1.5mm 方向及时间Direction and time: X, Y and Z directions for 2 hours each. 7-7 Humidity resistance 耐潮湿 a. 试验条件Test condition 温度Temp.: 60±2°C 湿度Humidity: 90%~95% 试验时间Test time: 96±2 h b. 测量条件Measurement method: 试验后常温常湿环境中放置（24±2）小时后测量。 The component should be stabilized at normal condition for (24±2) hours before test. 7-8 High temperature resistance 耐高温 a. 试验条件Test condition 温度Temp.: + 85±2°C 试验时间Test time: 96±2 h b. 测量条件Measurement method: 试验后常温常湿环境中放置（24±2）小时后测量。 The component should be stabilized at normal condition for (24±2) hours before test. 7-9 Low temperature resistance 耐低温 a. 试验条件Test condition 温度Temp.: -40±2°C 试验时间Test time: 96±2 h b. 测量条件Measurement method: 试验后常温常湿环境中放置（24±2）小时后测量。 The component should be stabilized at normal condition for (24±2) hours before test. 7-10 Thermal shock (Temperature cycle) 热冲击 （温度循环） Post Environmental Tolerance (环境试验后允许附加误差) 1 Center Frequency中心频率： ±25 MHz； 2 Band Width 通带宽度： ±20 MHz； 3 Gain 增益： ±0.2 dBi 4 V.S.W.R (in BW) 驻波比： ±0.5 dB； a. 试验条件Test condition 1) 温度Temp.: -40°C, 时间time: 30±3min 2) 温度Temp.: +85°C, 时间time: 30±3min 5 cycles b. 测量条件Measurement method: 试验后常温常湿环境中放置（24±2）小时后测量。 The component should be stabilized at normal condition for (24±2) hours before test. 深圳市麦捷微电子科技股份有限公司 地址：深圳市宝安…

Text truncated - open the document above for the full version.

TEST REPORT Report Number. : R14516988-E1 Applicant : Product Safety Consulting 605 Country Club Drive, Suites I & J, Bensenville, IL 60106 Model : S2000C Brand : Colgate FCC ID : 2AL5Y-S2000C EUT Description : Connected Toothbrush Test Standard(s) : FCC 47 CFR PART 15 SUBPART C:2022 Date Of Issue: 2023-01-30 Prepared by: UL LLC 12 Laboratory Dr. Research Triangle Park, NC 27709 U.S.A. TEL: (919) 549-1400 REPORT NO: R14516988-E1 DATE: 2023-01-30 FCC ID: 2AL5Y-S2000C Page 2 of 39 UL LLC 12 Laboratory Drive, RTP NC, 27709; USA TEL:(919)549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC REPORT REVISION HISTORY Rev. Issue Date Revisions Revised By V1 2022-10-14 Initial Issue Noah Bennett V2 2022-11-01 Updated section 6.1 and 6.6 Noah Bennett V3 2023-01-12 Updated Section 2 to Include Client Provided Data Charles Moody V4 2023-01-30 Added Attenuation Information Charles Moody REPORT NO: R14516988-E1 DATE: 2023-01-30 FCC ID: 2AL5Y-S2000C Page 3 of 39 UL LLC 12 Laboratory Drive, RTP NC, 27709; USA TEL:(919)549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC TABLE OF CONTENTS REPORT REVISION HISTORY ............................................................................................................... 2 TABLE OF CONTENTS .......................................................................................................................... 3 1. ATTESTATION OF TEST RESULTS ............................................................................................... 5 2. TEST RESULTS SUMMARY ............................................................................................................ 6 3. TEST METHODOLOGY ................................................................................................................... 6 4. FACILITIES AND ACCREDITATION ............................................................................................... 6 5. DECISION RULES AND MEASUREMENT UNCERTAINTY ............................................................ 7 5.1. METROLOGICAL TRACEABILITY ............................................................................................ 7 5.2. DECISION RULES..................................................................................................................... 7 5.3. MEASUREMENT UNCERTAINTY ............................................................................................. 7 5.4. SAMPLE CALCULATION .......................................................................................................... 7 6. EQUIPMENT UNDER TEST ............................................................................................................. 8 6.1. EUT DESCRIPTION .................................................................................................................. 8 6.2. MAXIMUM OUTPUT POWER.................................................................................................... 8 6.3. DESCRIPTION OF AVAILABLE ANTENNAS ............................................................................ 8 6.4. SOFTWARE AND FIRMWARE .................................................................................................. 8 6.5. WORST-CASE CONFIGURATION AND MODE ........................................................................ 8 6.6. DESCRIPTION OF TEST SETUP .............................................................................................. 9 7. MEASUREMENT METHOD .......................................................................................................... 10 8. TEST AND MEASUREMENT EQUIPMENT ................................................................................... 11 9. ANTENNA PORT TEST RESULTS ................................................................................................ 14 9.1. ON TIME AND DUTY CYCLE .................................................................................................. 14 9.2. 6 dB BANDWIDTH ................................................................................................................... 15 9.2.1. BLE (1Mbps) ..................................................................................................................... 15 9.3. OUTPUT POWER.................................................................................................................... 16 9.3.1. BLE (1Mbps) ..................................................................................................................... 16 9.4. AVERAGE POWER ................................................................................................................. 17 9.4.1. BLE (1Mbps) ..................................................................................................................... 17 9.5. POWER SPECTRAL DENSITY ............................................................................................... 18 9.5.1. BLE (1Mbps) ..................................................................................................................... 18 9.6. CONDUCTED SPURIOUS EMISSIONS .................................................................................. 19 9.6.1. BLE (1Mbps) ..................................................................................................................... 20 REPORT NO: R14516988-E1 DATE: 2023-01-30 FCC ID: 2AL5Y-S2000C Page 4 of 39 UL LLC 12 Laboratory Drive, RTP NC, 27709; USA TEL:(919)549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC 10. RADIATED TEST RESULTS ...................................................................................................... 21 10.1. LIMITS AND PROCEDURE ................................................................................................. 21 10.2. TRANSMITTER ABOVE 1 GHz ...........................................................................................…

Text truncated - open the document above for the full version.