2AL6KBL-M2268BU1IEEE 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth 5.0 USB2.0 Module

BL-M2268BU1 802.11ac867MbpsWLAN+BT5.0 RTL8822CU+MT7668BUUSB2.0 ModuleSpecification SHENZHENBILIANELECTRONICCO.,LTD Add:10~11/F,Building1A,Huaqiangideapark,Guangmingdistrict,Shenzhen.Guangdong,China Web:www.b-link.net.cn 1http://www.b-link.net.cn ModuleName:BL-M2268BU1 ModuleType:802.11a/b/g/n/ac867MbpsWLAN+Bluetooth5.0ComboUSB2.0Module Revision:V1.0 CustomerApproval: Company: Title: Signature:Date: BL-linkApproval: Title: Signature:Date: RevisionHistory RevisionSummaryReleaseDate 0.1Firstrelease2020-09-3 2http://www.b-link.net.cn 1. Introduction BL-M2268BU1 is a highly integrated module composed of two independent Dual-band WLAN + bluetooth5.0 2T2R USB2.0 submodules, it is designed base on RTL8822CE and MT7668BU chipset. The two independent submodules both support IEEE 802.11a/b/g/n/ac standard and provides the maximum PHY data rate up to 867Mbps, and supports 802.11ac Wave-2 MU-MIMO and 802.11n MIMO for 2.4/5G band, it can offer feature-rich wireless connectivity and reliable throughput from an extended distance. This module is applicable for OTT Box/IP TV and other smart wireless devices, the typical application is one submodule for Wireless projection, the other for wireless network. 1.1 Features Operating Frequencies: 2.4~2.4835GHz or 5.15~5.85GHzs  Interface: USB2.0 IEEE Standards: IEEE 802.11a/b/g/n/ac Wireless data rate can reach up to 876Mbps  WLAN supports PIFAantenna, BT supports PCB printed antenna Power Supply: VDD5.0V±0.2V main power supply 3http://www.b-link.net.cn 1.2 General Specifications Module NameBL-M8822CP2 867Mbps WLAN + BT5.0 USB2.0 Module ChipsetRTL8822CU+MT7668BU WLAN StandardsIEEE802.11a/b/g/n/ac Host InterfaceUSB2.0 Antenna WLAN: PIFAantenna, BT: PCB printed antenna Dimension200*18.0*1.2mm (L*W*H) Power Supply MT7668: DC 5.0V±0.3V @ 780 mA(Max), RTL8822CU: DC 5.0V±0.3V @ 780 mA (Max) Operation Temperature-20°C to +85°C Operation Humidity10% to 95% RH (Non-Condensing) 2. Pin Assignments 2.1 Pin Definition NoPin NameTypeVoltageModulePin Description 1 DC_EN I5V5V DC enable, active low module reset, pull high internal 2 BT_WAKE_HOSTI3.3V WLAN wake up host 3 VDDP5V5V power supply 4USB_D- I/O USB differential data line 5 USB_D+ I/O USB differential data line 4http://www.b-link.net.cn 6 GNDRFGND 7GND RFGND 8 NC---- 9 CHIP_INI3.3VChipenable,activelowmodulereset,pullhighinternal 10 WL_WAKE_HOSTI3.3V WLANwakeuphost 11DC_EN I5V5VDCenable,activelowmodulereset,pullhighinternal 12 BT_WAKE_HOSTI3.3V BTwakeuphost 13 VDDP5V5Vpowersupply 14USB_D- I/O USBdifferentialdataline 15 USB_D+ I/O USBdifferentialdataline 16 GNDRFGND 17GND RFGND 18 NC---- 19 CHIP_INI3.3VChipenable,activelowmodulereset,pullhighinternal 20 WL_WAKE_HOSTI3.3V BTwakeuphost 3.ElectricalandThermalSpecifications 3.1RecommendedOperatingConditions ParametersMinTypMaxUnits AmbientOperatingTemperature-402585°C SupplyVoltageVDD4.755.3V 3.2DigitalI/ODCSpecifications SymbolParameterMinTypMaxUnits VIHInputHighVoltage2.03.33.6V VILInputLowVoltage--00.9V VOHOutputHighVoltage2.97--3.3V VOL OutputLowVoltage 0--0.33V 5http://www.b-link.net.cn 3.3CurrentConsumption RTL8822CUCurrentConsumption Conditions:VDD=5V;Ta:25°C UseCase VBATCurrent(average) TypMaxUnits WiFiRadioOff(LinuxDriver)3050mA WiFiUnassociated(LinuxDriver)102150mA 2.4G1MbpsTX(RF-Test)230244mA 2.4G1MbpsRX(RF-Test)6574mA 2.4G11MbpsTX(RF-Test)198256mA 2.4G11MbpsRX(RF-Test)6575mA 2.4GMCS7(HT40)TX(RF-Test)332604mA 2.4GMCS7(HT40)RX(RF-Test)6275mA 2.4GMCS8(HT40)TX(RF-Test)189476mA 2.4GMCS15(HT40)RX(RF-Test)6175mA 5.8G6MbpsTX(RF-Test)459712mA 5.8G6MbpsRX(RF-Test)6275mA 5.8G54MbpsTX(RF-Test)283762mA 5.8G54MbpsRX(RF-Test)6275mA 5.8GMCS0(HT80)TX(RF-Test)361744mA 5.8GMCS0(HT80)RX(RF-Test)5875mA 5.8GMCS9(HT80)TX(RF-Test)196718mA 5.8GMCS9(HT80)RX(RF-Test)6175mA 6http://www.b-link.net.cn BTBR_1MDH5TX(RF-Test)120150mA BTEDR_3MDH5TX(RF-Test)118148mA BTLE_1MTX(RF-Test)123160mA BTLE_2MTX(RF-Test)113150mA MT7668BUCurrentConsumption Conditions:VDD=5V;Ta:25°C UseCase VBATCurrent(average) TypMaxUnits WiFiRadioOff(LinuxDriver)6080mA WiFiUnassociated(LinuxDriver,BT_Disable)70100mA 2.4G1MbpsTX(RF-Test)370410mA 2.4G1MbpsRX(RF-Test)110130mA 2.4G11MbpsTX(RF-Test)360408mA 2.4G11MbpsRX(RF-Test)120140mA 2.4G6MbpsTX(RF-TestRF0andRF1)460510mA 2.4G6MbpsRX(RF-Test)120150mA 2.4G54MbpsTX(RF-Test)350380mA 2.4G54MbpsRX(RF-Test)117142mA 2.4GMCS7(HT40)TX(RF-Test)440490mA 2.4GMCS7(HT40)RX(RF-Test)120160mA 2.4GMCS8(HT40)TX(RF-Test)430480mA 2.4GMCS8(HT40)RX(RF-Test)110150mA 2.4GMCS15(HT40)TX(RF-Test)280320mA 2.4GMCS15(HT40)RX(RF-Test)120150mA 7http://www.b-link.net.cn 5.8G6MbpsTX(RF-TestRF0andRF1)640690mA 5.8G6MbpsRX(RF-Test)130160mA 5.8G54MbpsTX(RF-Test)420490mA 5.8G54MbpsRX(RF-Test)130170mA 5.8GMCS0(HT80)TX(RF-Test)410460mA 5.8GMCS0(HT80)RX(RF-Test)140180mA 5.8GMCS9(HT80)TX(RF-Test)270310mA 5.8GMCS9(HT80)RX(RF-Test)140180mA BluetoothUnassociated(LinuxDriver,WiFi_Disable)5070mA BTBR_1MDH5TX@6dBm(MPTools,WiFi_Disable)160180mA BTEDR_3MDH5TX@6dBm(MPTools,WiFi_Disable)150170mA BTLE_1MTX@6dBm(MPTools,WiFi_Disable)170190mA BTLE_2MTX@6dBm(MPTools,WiFi_Disable)160180mA BTLE_2MRXActive(MPTools,WiFi_Disable)7090mA 4.WIFI&BluetoothRFSpecifications 4.12.4GWIFIRFSpecification Conditions:VDD=3.3V;Ta:25°C FeaturesDescription WLANStandardIEEE802.11b/g/n,CSMA/CA FrequencyRange2.4~2.4835GHz(2.4GHzISMBand) ChannelsCh1~Ch13(For20MHzChannels) Modulation 802.11b(DSSS):CCK,DQPSK,DBPSK; 802.11g(OFDM):BPSK,QPSK,QAM16,QAM64; 802.11n(OFDM):BPSK,QPSK,QAM16,QAM64; DateRate802.11b:1,2,5.5,11Mbps; 8http://www.b-link.net.cn 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps; 802.11n (HT20): MCS0~MCS7(1T1R_SISO) 6.5~72.2Mbps; 802.11n (HT20): MCS8~MCS15(2T2R_MIMO) 13~144.4Mbps; 802.11n (HT40): MCS0~MCS7(1T1R_SISO) 13.5~150Mbps; 802.11n (HT40): MCS8~MCS15(2T2R_MIMO) 27~300Mbps; Frequency Tolerance≦±15ppm RTL8822CU 2.4G Receiver Specifications RX RateMin Input Level（dBm）Max Input Level（dBm）PER 802.11b@1Mbps-950< 8% 802.11b@11Mbps-87 0 < 8% 802.11g@6Mbps-920< 10% 802.11g@54Mbps-74 0 < 10% 802.11n@HT20_MCS0-910< 10% 802.11n@HT20_MCS7-71 0 < 10% 802…

Text truncated - open the document above for the full version.

Shenzhen Bilian Electronic Co.,Ltd. Agent Authorization Company: Shenzhen Bilian Electronic Co.,Ltd. Address: Room 501, Building 3, No. 32, Dafu Road, Zhangge Community, Fucheng Street, Longhua District, Shenzhen City, China Product Name: IEEE 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth 5.0 USB2.0 Module Trade Mark: N/A Model Number(s): BL-M2268BU1 FCC ID: 2AL6KBL-M2268BU1 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2020-11-18 Name: Hanbing Deng Title: Manager Company: Shenzhen Bilian Electronic Co.,Ltd.

Shenzhen Bilian Electronic Co.,Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-11-18 Subject; Request for Confidentiality FCC ID: 2AL6KBL-M2268BU1 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description BOM Software Security Requirements In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name / Title: Hanbing Deng / Manager Company: Shenzhen Bilian Electronic Co.,Ltd. Address: Room 501, Building 3, No. 32, Dafu Road, Zhangge Community, Fucheng Street, Longhua District, Shenzhen City, China Phone: +86 18118768735 Fax:+86 0755-24665666 E-Mail: [email protected]

Shenzhen Bilian Electronic Co.,Ltd. FCC Modular Approval Request Rev 3.0 Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Subject; Module Approval Request Letter Company name: IEEE 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth 5.0 USB2.0 Module FCC ID: 2AL6KBL-M2268BU1 Dear Sir/Madam, This letter includes the FCC application requirements for Modular Transmitter Approval Request for;- FCC KDB 996369 D01 ‘Module Certification Guide v02; and FCC KDB 996369 D03 OEM Manual v01 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Equip Auth Guide v02’. FCC ID 2AL6KBL-M2268BU1 has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. Yes the module with a shield. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. Yes The module must contain power supply regulation on the module. The modular has an onboard 3.3V regulator(integrated in RTL8189FTV). The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). The modular has a External antenna which comply with the antenna requirement of Section 15.203,Maximum Antenna Gain is 2dBi. The module must demonstrate compliance in a stand-alone configuration. The modular was tested in a standalone configuration apart from host units. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). The modular has its own FCC ID number. The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. Yes Shenzhen Bilian Electronic Co.,Ltd. FCC Modular Approval Request Rev 3.0 The module must comply with RF exposure requirements Yes, RF cexposure evaluation performed at 20cm. Integration Instructions for host product manufacturers The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of requirements and Checklist. Refer to the KDB for description of the complete requirements; KDB Ref Sect Requirements of KDB 996369 D03 User Manual Page Number reference 2.2 List of applicable FCC rules Page 18 2.3 Summarize the specific operational use conditions Page 18 2.4 Limited module procedures Page 18 2.5 Trace antenna designs Page 18 2.6 RF exposure considerations Page 18 2.7 Antennas Page 18 2.8 Label and compliance information Page 18 2.9 Information on test modes and additional testing requirements Page 18 2.10 Additional testing, Part 15 Subpart B disclaimer Page 18 Name: Hanbing Deng Date: 2020-11-18 Title: Manager Signature of applicant

FCC ID: 2AL6KBL-M2268BU1 Fig. 1 Fig. 2 BT Antenna 2 (MT7668BU) WLAN Antenna 0 (MT7668BU) WLAN Antenna 1 (MT7668BU) BT Antenna 2 (RTL8822CU Disable) WLAN Antenna 0 ((RTL8822CU)) WLAN Antenna 1 ((RTL8822CU)) FCC ID: 2AL6KBL-M2268BU1 Fig. 3 Fig. 4 FCC ID: 2AL6KBL-M2268BU1 Fig. 5

_____________________________________________________________________________________________________ LABEL AND LOCATION (Size: L2.0cm x 1.0cm) Label Location FCC ID: 2AL6KBL-M2268BU1

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong RF Exposure evaluation Report Reference No...................... : FCC ID. ............................................ : GTS20201022021-1-12 2AL6KBL-M2268BU1 Compiled by ( position+printed name+signature) . : File administrators Peter Xiao Supervised by ( position+printed name+signature) . : Test Engineer Moon Tan Approved by ( position+printed name+signature) . : Manager Simon Hu Date of issue .................................... : Nov.13, 2020 Representative Laboratory Name . : Shenzhen Global Test Service Co.,Ltd. Address ............................................ : No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong Applicant’s name ............................ : Shenzhen Bilian Electronic Co.,Ltd. Address ............................................ : Room 501, Building 3, No. 32, Dafu Road, Zhangge Community, Fucheng Street, Longhua District, Shenzhen City, China Test specification ........................... : Standard ........................................... : 47CFR §1.1310 47CFR §2.1091 KDB447498 v06 TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ...................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : IEEE 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth 5.0 USB2.0 Module Trade Mark ....................................... : N/A Manufacturer .................................... : Shenzhen Bilian Electronic Co.,Ltd. Model/Type reference ...................... : BL-M2268BU1 Listed Models .................................. : N/A Modulation Type ............................... : IEEE 802.11a /802.11b/802.11g/802.11n/802.11ac Operation Frequency........................ : From 2412MHz to 2462MHz, 5180MHz to 5240MHz, 5745MHz to 5825MHz, 2402MHz to 2480MHz Hardware Version ............................ : V1.0 Software Version .............................. : V1.1 Rating ............................................... : DC 5V Result ............................................... : PASS Report No.: GTS20201022021-1-12 Page 2 of 24 T E S T R E P O R T Test Report No. : GTS20201022021-1-12 Nov.13, 2020 ______________________________________________________________________________________________ Date of issue Equipment under Test : IEEE 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth 5.0 USB2.0 Module Model /Type : BL-M2268BU1 Listed model : N/A Applicant : Shenzhen Bilian Electronic Co.,Ltd. Address : Room 501, Building 3, No. 32, Dafu Road, Zhangge Community, Fucheng Street, Longhua District, Shenzhen City,China Manufacturer : Shenzhen Bilian Electronic Co.,Ltd. Address : Room 501, Building 3, No. 32, Dafu Road, Zhangge Community, Fucheng Street, Longhua District, Shenzhen City,China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20201022021-1-12 Page 3 of 24 Contents 1. SUMMARY .................................................................................................................................................... 4 1.1 EUT CONFIGURATION .................................................................................................................................... 4 1.2 PRODUCT DESCRIPTION ................................................................................................................................ 4 2. TEST ENVIRONMENT .................................................................................................................................. 5 2.1 ADDRESS OF THE TEST LABORATORY .............................................................................................................. 5 2.2 TEST FACILITY ............................................................................................................................................... 5 2.3 ENVIRONMENTAL CONDITIONS ........................................................................................................................ 5 2.4 STATEMENT OF THE MEASUREMENT UNCERTAINTY .......................................................................................... 5 3. METHOD OF MEASUREMENT ................................................................................................................... 6 3.1 APPLICABLE STANDARD ................................................................................................................................. 6 3.2 REQUIREMENT .............................................................................................................................................. 6 3.3 LIMIT ............................................................................................................................................................. 6 3.4 MPE CALCULATION METHOD ......................................................................................................................... 7 3.5 ANTENNA INFORMATION ................................................................................................................................. 7 4. CONDUCTED POWER RESULTS ........................................…

Text truncated - open the document above for the full version.

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. ..................... : FCC ID. ............................................ : GTS20201022021-1-8 2AL6KBL-M2268BU1 Compiled by ( position+printed name+signature).. : File administrators Peter Xiao Supervised by ( position+printed name+signature).. : Test Engineer Moon Tan Approved by ( position+printed name+signature).. : Manager Simon Hu Date of issue ..................................... : Nov.13, 2020 Representative Laboratory Name . : Shenzhen Global Test Service Co.,Ltd. Address ............................................ : No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong,China Applicant’s name ............................ : Shenzhen Bilian Electronic Co.,Ltd. Address ............................................ : Room 501, Building 3, No. 32, Dafu Road, Zhangge Community, Fucheng Street, Longhua District, Shenzhen City,China Test specification ........................... : Standard ........................................... : FCC Part 15.247: Operation within the bands 902-928 MHz, 2400- 2483.5 MHz and 5725-5850 MHz TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ....................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : IEEE 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth 5.0 USB2.0 Module Trade Mark ....................................... : N/A Manufacturer .................................... : Shenzhen Bilian Electronic Co.,Ltd. Model/Type reference ...................... : BL-M2268BU1 List Models ..................................... : N/A Modulation Type ............................... : GFSK,π/4-DQPSK,8DPSK Operation Frequency ........................ : From 2402MHz to 2480MHz Hardware Version ............................ : V1.0 Software Version .............................. : V1.1 Rating ............................................... : DC 5V Result ............................................... : PASS Report No.: GTS20201022021-1-8 Page 2 of 39 T E S T R E P O R T Test Report No. : GTS20201022021-1-8 Nov.13, 2020 ______________________________________________________________________________________________ Date of issue Equipment under Test : IEEE 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth 5.0 USB2.0 Module Model /Type : BL-M2268BU1 Listed model : N/A Applicant : Shenzhen Bilian Electronic Co.,Ltd. Address : Room 501, Building 3, No. 32, Dafu Road, Zhangge Community, Fucheng Street, Longhua District, Shenzhen City,China Manufacturer : Shenzhen Bilian Electronic Co.,Ltd. Address : Room 501, Building 3, No. 32, Dafu Road, Zhangge Community, Fucheng Street, Longhua District, Shenzhen City,China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20201022021-1-8 Page 3 of 39 Contents 1. TEST STANDARDS ......................................................................................................................................... 4 2. SUMMARY ....................................................................................................................................................... 5 2.1. General Remarks ................................................................................................................................... 5 2.2. Product Description ................................................................................................................................ 5 2.3. Equipment Under Test ........................................................................................................................... 6 2.4. Short description of the Equipment under Test (EUT) ........................................................................... 6 2.5. EUT operation mode .............................................................................................................................. 6 2.6. Block Diagram of Test Setup ................................................................................................................. 7 2.7. Related Submittal(s) / Grant (s) ............................................................................................................. 7 2.8. EUT Exercise Software .......................................................................................................................... 7 2.9. Special Accessories ............................................................................................................................... 7 2.10. External I/O Cable ................................................................................................................................ 7 2.11. Modifications ........................................................................................................................................ 7 3. TEST ENVIRONMENT ..................................................................................................................................... 8 3.1. Address of the test laboratory .................................................…

Text truncated - open the document above for the full version.

FCC ID: 2AL6KBL-M2268BU1 _______________________________________________________________________________________________ Page 1 of 2 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement Fig. 1 Fig. 2 FCC ID: 2AL6KBL-M2268BU1 _______________________________________________________________________________________________ Page 2 of 2 1.2. Photo of Conducted Emissions Measurement Fig. 3