2ALS8-KS0018Ninebot eKickScooter E2 Pro

www.segway.com CE.04.00.0921.00-C Original instructions XXXX The manufacturer reserves the right to make changes to the product, release firmware updates, and update this manual at any time. Visit www.segway.com or check the Segway-Ninebot app to download the latest user materials. You must install the app, activate your KickScooter, and obtain the latest updates and safety instructions. Le fabricant se réserve le droit d'apporter des modifications au produit, de publier des mises à jour du firmware et de mettre à jour ce manuel à tout moment. Rendez-vous sur www.segway.com ou consultez l'application Segway-Ninebot pour télécharger les derniers documents destinés à l'utilisateur. Vous devez installer l'application, activer votre KickScooter et obtenir les dernières mises à jour et consignes de sécurité. El fabricante se reserva el derecho de realizar cambios en el producto, fabricar actualizaciones de sus piezas y actualizar este manual en cualquier momento. Visite www.segway.com o consulte la aplicación Segway-Ninebot para descargar los materiales más recientes para el usuario. Debe instalar la aplicación, activar el KickScooter y obtener las últimas actualizaciones e instrucciones de seguridad. EN FR ES Ninebot KickScooter Product Manual Manuel du produit Manual del producto EN FR ES EN The pictures shown are for illustration purposes only. The actual product may vary. FR Les images sont présentées à titre indicatif uniquement. Le produit réel peut varier. ES Las imágenes que se muestran son solo para fines ilustrativos. El producto real puede variar. Raccolta Carta Left Direction Indicator Right Direction Indicator Power Button: Press the button to power on the scooter; press and hold the button for 2 seconds to power it off. When the scooter is on, press the power button to turn on/off the headlight and taillight, and press twice to switch among the four speed modes. Press three times to turn on/off the ambient light. Press five times to switch the unit between km/h and mph. Speedometer: It displays the current speed of the scooter during riding, and displays the battery power during charging. Speed Mode: There are 4 modes available. The speed limit and ranges of each speed mode are as follows: * Ranges of Speed Modes: tested while riding with a full battery, 75 kg (165 lbs) load, 25 °C (77 °F), at the max. speed of each speed mode on average on pavement. Left Directioin Indicator: When this icon blinks, it indicates that the direction indicators on the left side are turned on. Right Directioin Indicator: When this icon blinks, it indicates that the direction indicators on the right side are turned on. Walk Mode: The headlight is always on, the taillight is breathing and can't be turned off. Error Notification: It indicates that the scooter has detected an error. Please check the error code via Segway-Ninebot app. Temperature Warning: It indicates that the temperature of the battery, controller or motor is too high or too low. Please check the device temperature via Segway-Ninebot app. * At this point, the scooter cannot accelerate normally and may not be charged. Do not use until the temperature has reverted to the normal range. Bluetooth: It indicates that the scooter has been successfully connected to the mobile device. Battery Level: The total battery power equals 5 bars. * The battery power is very low when the first battery bar is red. Please charge your scooter immediately. Locking Reminder: When the icon lights up, it means the scooter is locked. If abnormal movements are detected, the scooter will start beeping and the tail light will falsh. Cruise Mode: When the icon lights up, it means cruise mode is turned on. Diagram 1 Dashboard & Power Button Speedometer Temperature Warning Locking Reminder Bluetooth Speed Mode Walk Mode Headlight Cruise Mode Error Notification Battery Level Power Button Model Mode Speed limit 9.3 mph (15 km/h) 12.4 mph (20 km/h) 15.5 mph (25 km/h) 3.1 mph (5 km/h) Ranges* 24.9 miles (40 km) 21.7 miles (35 km) 16.8 miles (27 km) N/A D (Standard mode) E (ECO mode) S (Sport mode) (Walk mode) Ambient Light Direction Indicator Switch Left Direction Indicator Right Direction Indicator Bell Handlebar Electronic Throttle Snap Hook Dashboard Brake Lever Headlight Stem Folding Mechanism Quick-release Lever Front Fork Front Fender Hub Motor Charge Port Footboard Buckle Rear Fender Drum Brake Taillight & Rear Reflector Side Reflector Front Reflector Kickstand Battery Compartment Power Button Safety Button Returning mark 01 02 ENEN Certifications This product is certified to ANSI/CAN/UL2272 by SGS. The battery complies with UN/DOT 38.3. The battery complies with ANSI/CAN/UL2272. Federal Communications Commission (FCC) Compliance Statement for USA This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate th…

Text truncated - open the document above for the full version.

<Ninebot (Changzhou) Tech Co., Ltd. > < Ninebot (Changzhou) Tech Co., Ltd. > < 16F-17F, Block A, Building 3, Changwu Mid Road 18#, Wujin Dist., Changzhou, Jiangsu, China > Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA <2023/08/15> Attestation Statement according to 2.911(d)(5)(i) and 2.911(d)(5)(ii) FCC ID: < 2ALS8-KS0018 > TO WHOM IT MAY CONCERN: Hereby we certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Further we certify that, as of the date of the filing of the application, < Ninebot (Changzhou) Tech Co., Ltd. > is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, _______________ (signature & company stamp) < Ninebot (Changzhou) Tech Co., Ltd.> <FRN: 0026431767> < 16F-17F, Block A, Building 3, Changwu Mid Road 18#, Wujin Dist., Changzhou, Jiangsu, China > < Jun Jin > < +86 051969657952 > < [email protected] >

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-15-2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2ALS8-KS0018 Applicant FRN: 0026431767 Ninebot (Changzhou) Tech Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, FCC US Agent, LLC is our designated U.S. agent for service of process for the above referenced FCC ID. Ninebot (Changzhou) Tech Co., Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. FCC US Agent, LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: FCC US Agent, LLC U.S. Agent FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Email: [email protected] Sincerely, Ninebot (Changzhou) Tech Co., Ltd. FCC US Agent, LLC Jun Jin Tim Payne [Insert Applicant signature] [U.S. Agent signature]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 <08/16/2023> TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b) (4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2ALS8-KS0018 051405U For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos 180 days Internal Photos 180 days Block Diagram Schematics Test Setup Photos 180 days User’s Manual 180 days Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, (Signed) Name: Jun Jin Company: Ninebot (Changzhou) Tech Co., Ltd. Address: 16F-17F, Block A, Building 3, Changwu Mid Road 18#, Wujin Dist., Changzhou, Jiangsu, China Tel.: +86 051969657952 Email: [email protected]

Tianjin Dongdian Testing Service Co., Ltd. Report No.: DDT-B23070310-2E02 QR-4-106-20 RevA0 Page 62 of 73 14. Photos of the EUT Tianjin Dongdian Testing Service Co., Ltd. Report No.: DDT-B23070310-2E02 QR-4-106-20 RevA0 Page 63 of 73 Tianjin Dongdian Testing Service Co., Ltd. Report No.: DDT-B23070310-2E02 QR-4-106-20 RevA0 Page 64 of 73 Tianjin Dongdian Testing Service Co., Ltd. Report No.: DDT-B23070310-2E02 QR-4-106-20 RevA0 Page 65 of 73 Tianjin Dongdian Testing Service Co., Ltd. Report No.: DDT-B23070310-2E02 QR-4-106-20 RevA0 Page 66 of 73 Tianjin Dongdian Testing Service Co., Ltd. Report No.: DDT-B23070310-2E02 QR-4-106-20 RevA0 Page 67 of 73

Label location

1 1 工艺类别 等级 质量 / 标记 处数 陆飞230703 230703 赵梦圆 更改文件号 姓名 日期 设计 审核 版本 图幅 比例 A4B B/ 包材定制-标签贴纸类 1:1 校对 投影视角 标准化 批准 第页 共 页 图示 裁切线 压线 反压线 齿刀线 x/x mm 开槽 粘合区域 88*22 mm±0.5mm ±1mm 0~200mm ±2mm 20~500mm ±3mm ＞500mm ±5mm 单瓦楞 ±3mm 双瓦楞 ±5mm 88*22 mm 印刷方向 成型尺寸 公差（无特殊说明下） 展开尺寸 图纸方向 纸箱类 标签类 说明书类 PE袋类 模具成型类 (EPS/纸塑等） EPE类 外尺寸:0~400mm ±2mm 400~600mm ±3mm ＞600mm ±4mm 腔体尺寸:+2/-0mm +5mm/-3mm FCC标签-E2 Pro CE.03.01.3045.00 技术说明： 1、材质： 50#白色PET 2、印刷色：潘通Black C PANTONE Cool Gray 5C 3、工艺：高粘不可移胶，印刷+模切 4、粘性指标：标签粘贴对应位置无走位、开口、起翘、脱落现象 5、可靠性测试要求：车体标签需符合我司《SN_B 2055-2020.6 标签、贴纸测试规范（L1）》 6、其它特殊说明：ROHS; REACH-SVHC; REACH附录17; POPS;TSCA; CA65; TPCH新增:MOAH&MOSH 88 R2 22 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B). Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. CAN ICES-3 (B)/NMB-3(B) Model Number: 051405U Numéro du modèle: 051405U FCC ID: 2ALS8-KS0018 IC: 22636-KS0018 1 1 1.更新ID编号，版本升级 1 CN0000007973 陆飞230703

Tianjin Dongdian Testing Service Co., Ltd. Report No.: DDT-B23070310-2E02 QR-4-106-20 RevA0 Page 67 of 73 Tianjin Dongdian Testing Service Co., Ltd. Report No.: DDT-B23070310-2E02 QR-4-106-20 RevA0 Page 68 of 73 Tianjin Dongdian Testing Service Co., Ltd. Report No.: DDT-B23070310-2E02 QR-4-106-20 RevA0 Page 69 of 73 Tianjin Dongdian Testing Service Co., Ltd. Report No.: DDT-B23070310-2E02 QR-4-106-20 RevA0 Page 70 of 73 BT Antenna Tianjin Dongdian Testing Service Co., Ltd. Report No.: DDT-B23070310-2E02 QR-4-106-20 RevA0 Page 71 of 73 Tianjin Dongdian Testing Service Co., Ltd. Report No.: DDT-B23070310-2E02 QR-4-106-20 RevA0 Page 72 of 73 Tianjin Dongdian Testing Service Co., Ltd. Report No.: DDT-B23070310-2E02 QR-4-106-20 RevA0 Page 73 of 73 END OF REPORT

Tianjin Dongdian Testing Service Co., Ltd Report No.:DDT-B23070310-2E04 QR-4-106-24 RevA0 Page 1 of 5 RF EXPOSURE REPORT Report No.: DDT-B23070310-2E04 Issued By: Tianjin Dongdian Testing Service Co., Ltd. Address: Building D-1, No. 19, Weisi Road, Microelectronics Industrial Park Development Area, Tianjin, China. Tel: +86-22-58038033, E-mail: [email protected], http://www.ddttest.com Applicant : Ninebot (Changzhou) Tech Co., Ltd. Address : 16F-17F, Block A, Building 3, Changwu Mid Road 18#, Wujin Dist., Changzhou, Jiangsu, China Equipment under Test : Ninebot eKickScooter E2 Pro Model No. : 051405U Trade Mark : FCC ID : 2ALS8-KS0018 Manufacturer : Ninebot (Changzhou) Tech Co., Ltd. Address : 16F-17F, Block A, Building 3, Changwu Mid Road 18#, Wujin Dist., Changzhou, Jiangsu, China Tianjin Dongdian Testing Service Co., Ltd Report No.:DDT-B23070310-2E04 QR-4-106-24 RevA0 Page 2 of 5 TABLE OF CONTENTS Test report declares.......................................................................................................3 1. General information ...................................................................................................... 5 1.1. Description of Equipment .............................................................................................. 5 1.2. Assess laboratory ......................................................................................................... 5 2. RF Exposure evaluation for FCC .................................................................................. 5 Tianjin Dongdian Testing Service Co., Ltd Report No.:DDT-B23070310-2E04 QR-4-106-24 RevA0 Page 3 of 5 TEST REPORT DECLARE Standard Used: KDB447498 D01 General RF Exposure Guidance v06 We Declare: The equipment described above is assessed by Tianjin Dongdian Testing Service Co., Ltd and in the configuration assessed the equipment complied with the standards specified above. The assessed results are contained in this report and Tianjin Dongdian Testing Service Co., Ltd is assumed of full responsibility for the accuracy and completeness of these assess. After evaluation, our opinion is that the equipment In Accordance with above standard. Report No: DDT-B23070310-2E04 Date of Receipt: Jul. 03, 2023 Date of Test: Jul. 03, 2023 ~ Aug. 10, 2023 Prepared By: Approved By: _______________ _____________________ Sunny Zhang/Engineer Aaron Zhang/Manager Note: This report applies to above tested sample only. This report shall not be reproduced in parts without written approval of Tianjin Dongdian Testing Service Co., Ltd. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Applicant : Ninebot (Changzhou) Tech Co., Ltd. Address : 16F-17F, Block A, Building 3, Changwu Mid Road 18#, Wujin Dist., Changzhou, Jiangsu, China Equipment under Test : Ninebot eKickScooter E2 Pro Model No. : 051405U Trade mark : Manufacturer : Ninebot (Changzhou) Tech Co., Ltd. Address : 16F-17F, Block A, Building 3, Changwu Mid Road 18#, Wujin Dist., Changzhou, Jiangsu, China Tianjin Dongdian Testing Service Co., Ltd Report No.:DDT-B23070310-2E04 QR-4-106-24 RevA0 Page 4 of 5 Revision history Rev. Revisions Issue Date Revised By --- Initial issue Aug. 10, 2023 Tianjin Dongdian Testing Service Co., Ltd Report No.:DDT-B23070310-2E04 QR-4-106-24 RevA0 Page 5 of 5 1. General information 1.1. Description of Equipment 1.2. Assess laboratory Tianjin Dongdian Testing Service Co., Ltd. Address: Building D-1, No. 19, Weisi Road, Microelectronics Industrial Park Development Area, Tianjin, China. Tel: +86-22-58038033, http://www.ddttest.com, Email: [email protected] NVLAP (National Voluntary Laboratory Accreditation Program) CODE: 500036-0 CNAS (China National Accreditation Service for Conformity Assessment) CODE: L13402 FCC Designation Number: CN5004; FCC Test Firm Registration Number: 368676 ISED (Innovation, Science and Economic Development Canada) Company Number: 27768 Conformity Assessment Body Identifier: CN0125 VCCI Facility Registration Number: C-20089, T-20093, R-20125, G-20122 2. RF Exposure evaluation for FCC According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Max Turn-up PK power：3dBm Worse case is as below: [2480MHz, 3 dBm, 2 mW) output power] (2/5) ·[√2.480(GHz)] =0.63<3.0 for 1-g SAR Conclusion: The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure of portable device. END OF REPORT EUT* Name : Ninebot eKickScooter E2 Pro Model Number : 051405U EUT Function Description : Please reference user manual of this device Power Supply : DC 36V by Polymer Li-ion built-in battery Radio Specification : Bluetooth V5.1 Operation Frequency : 2402 MHz - 2480 MHz Modulation : GFSK Data Rate : 1 Mbps Antenna Type : PCB antenna, maximum PK gain: -1.26 dBi Exposure category : General population/uncontrolled environment Device Type : Portable Device Maximum tune-up tolerance : 2 dB

天线规格Antenna Data Sheet 天线类型Antenna Type: 印刷式天线PCB Antenna 天线型号 Antenna Modle:NEB0213 阻抗Impedance: 50Ω 极化方式Polarization: 线性Linear 频率范围Frequency Range: 2400 ~ 2483.5GHz 天线增益Max Peak Gain: -1.26dBi 制造商Manufacturer: Shuangjin 天线辐射图Antenna Radiation Pattern Antenna Gain X BT Antenna Gain Y Vertical at 2440MHz Horizontal at 2440MHz BT Antenna Gain Z Vertical at 2440MHz Horizontal at 2440MHz Vertical at 2440MHz Horizontal at 2440MHz

Tianjin Dongdian Testing Service Co., Ltd. Report No.: DDT-B23070310-2E02 QR-4-106-20 RevA0 Page 1 of 72 FCC AND IC CERTIFICATION TEST REPORT Report No.: DDT-B23070310-2E02 Issued By: Tianjin Dongdian Testing Service Co., Ltd. Address: Building D-1, No. 19, Weisi Road, Microelectronics Industrial Park Development Area, Tianjin, China. Tel: +86-22-58038033, E-mail: [email protected], http://www.ddttest.com Applicant : Ninebot (Changzhou) Tech Co., Ltd. Address : 16F-17F, Block A, Building 3, Changwu Mid Road 18#, Wujin Dist., Changzhou, Jiangsu, China Equipment under Test : Ninebot eKickScooter E2 Pro Model No. : 051405U Trade Mark : FCC ID : 2ALS8-KS0018 IC : 22636-KS0018 Manufacturer : Ninebot (Changzhou) Tech Co., Ltd. Address : 16F-17F, Block A, Building 3, Changwu Mid Road 18#, Wujin Dist., Changzhou, Jiangsu, China Tianjin Dongdian Testing Service Co., Ltd. Report No.: DDT-B23070310-2E02 QR-4-106-20 RevA0 Page 2 of 72 TABLE OF CONTENTS Test report declares.......................................................................................................3 1. Summary of Test Results ............................................................................................. 6 2. General Test Information .............................................................................................. 7 2.1. Description of EUT ........................................................................................................ 7 2.2. Accessories of EUT ...................................................................................................... 7 2.3. Assistant equipment used for test ................................................................................. 7 2.4. Block diagram of EUT configuration for test ................................................................. 8 2.5. Deviations of test standard ........................................................................................... 8 2.6. Test environment conditions ......................................................................................... 9 2.7. Test laboratory .............................................................................................................. 9 2.8. Measurement uncertainty ........................................................................................... 10 3. Equipment Used During Test ...................................................................................... 11 4. 6 dB Bandwidth and 99% Bandwidth .......................................................................... 12 4.1. Block diagram of test setup ........................................................................................ 12 4.2. Limits .......................................................................................................................... 12 4.3. Test procedure ............................................................................................................ 12 4.4. Test result ................................................................................................................... 13 4.5. Original test data ......................................................................................................... 13 5. Maximum Peak Output Power .................................................................................... 17 5.1. Block diagram of test setup ........................................................................................ 17 5.2. Limits .......................................................................................................................... 17 5.3. Test procedure ............................................................................................................ 17 5.4. Test result ................................................................................................................... 17 5.5. Original test data ......................................................................................................... 18 6. Power Spectral Density .............................................................................................. 20 6.1. Block diagram of test setup ........................................................................................ 20 6.2. Limits .......................................................................................................................... 20 6.3. Test procedure ............................................................................................................ 20 6.4. Test result ................................................................................................................... 21 6.5. Original test data ......................................................................................................... 21 7. Band Edge Compliance (Conducted Method)............................................................. 23 7.1. Block diagram of test setup ........................................................................................ 23 7.2. Limits .......................................................................................................................... 23 7.3. Test procedure ............................................................................................................ 23 7.4. Test result ................................................................................................................... 24 7.5. Original test data ......................................................................................................... 24 8. Radiated Emission ...................................................................................................... 27 Tianjin Dongdian Testing Service Co., Ltd. Report No.: DDT-B23070310-2E02 QR-4-106-20 RevA0 Page 3 of 72 8.1. Block diagram of test setup ........................................................................................ 27 8.2. Limit ............................................................…

Text truncated - open the document above for the full version.

Tianjin Dongdian Testing Service Co., Ltd. Report No.: DDT-B23070310-2E02 Page 60 of 73 13. Test Setup Photograph Tianjin Dongdian Testing Service Co., Ltd. Report No.: DDT-B23070310-2E02 Page 61 of 73