2AN8F-M2008QEsquire 5000mAh Power Bank+ Wireless Charger with Cable Bl

ShenZhen Mossloo Industrial Co.,Ltd 2020.9.9 Eurofins MET Labs 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR Product Name: Esquire 5000mAh Power Bank+Wireless Charger with Cable BI Trademark: N/A Model Number(s): M2008Q, EPB-ES20BK FCC ID: 2AN8F-M2008Q To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Orders Cheng /Manager Contact information / address: Road One No.4, Science Industrial Park, Shangxue Village, Bantian Street, Longgang District, Shenzhen, China

ShenZhen Mossloo Industrial Co.,Ltd 2020.9.9 Eurofins MET Labs 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Orders Cheng /Manager Contact information / address: Road One No.4, Science Industrial Park, Shangxue Village, Bantian Street, Longgang District, Shenzhen, China

Shenzhen Mossloo Industrial Co.,Ltd Model Difference 2020-9-9 Product Name: Esquire 5000mAh Power Bank+Wireless Charger with Cable BI Trademark: N/A Model Number(s): M2008Q, EPB-ES20BK FCC ID: 2AN8F-M2008Q All the model are the same circuit and RF module, except model names. Regards Sincerely Client’s signature: Client’s name / title : Orders Cheng /Manager Contact information / address: Road One No.4, Science Industrial Park, Shangxue Village, Bantian Street, Longgang District, Shenzhen, China

External Photos

Size:30*15mm FCC ID: 2AN8F-M2008Q This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interfer ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Location

Internal Photos Antenna

Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2008000614-1E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-009 Ver.：A.0 Page 1 of 14 RF EXPOSURE REPORT For FCC ID: 2AN8F-M2008Q Product Name: Esquire 5000mAh Power Bank+Wireless Charger with Cable BI Trademark: N/A Model Number: M2008Q EPB-ES20BK Prepared For : Shenzhen Mossloo Industrial Co., Ltd Address : Road One No.4, Science Industrial Park, Shangxue Village, Bantian Street, Longgang District, Shenzhen, China Prepared By : Shenzhen BCTC Testing Co., Ltd. Address : BCTC Building & 1-2F, East of B Building, Pengzhou Industrial, Fuyuan 1st Road, Qiaotou Community, Fuyong Street, Bao’an District, Shenzhen, China Test Date: Aug. 10, 2020 - Aug. 24, 2020 Date of Report : Aug. 25, 2020 Report No.: BCTC2008000614-1E Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2008000614-1E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-009 Ver.：A.0 Page 2 of 14 TEST RESULT CERTIFICATION Applicant’s name ................. : Shenzhen Mossloo Industrial Co., Ltd Address ................................. : Road One No.4, Science Industrial Park, Shangxue Village, Bantian Street, Longgang District, Shenzhen, China Manufacture's Name ............ : Shenzhen Mossloo Industrial Co., Ltd Address ................................. : Road One No.4, Science Industrial Park, Shangxue Village, Bantian Street, Longgang District, Shenzhen, China Product description Product name ........................... : Esquire 5000mAh Power Bank+Wireless Charger with Cable BI Trademark ............................ : N/A Model and/or type reference : M2008Q Serial Model : EPB-ES20BK Power Supply : DC 3.7V From Battery USB Input: DC 5V/2A USB Ouput: DC 5V/2A Built-in Cable Output: DC 5V/2A Wireless Charging Output: 5W Total Output: 10W(Max) Standards ............................. : FCC CFR 47 part1, 1.1307(b), 1.1310 This device described above has been tested by BCTC, and the test results show that the equipment under And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of BCTC, this document may be altered or revised by BCTC, personal only, and shall be noted in the revision of the document. Prepared by(Engineer): Willem Wang Reviewer(Supervisor): Eric Yang Approved(Manager): Zero Zhou Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2008000614-1E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-009 Ver.：A.0 Page 3 of 14 Table of Contents Page 1 . GENERAL INFORMATION 4 1.1. Independent Operation Mode 4 1.2. Test Supporting System 4 2 . LIST OF TEST AND MEASUREMENT INSTRUMENTS 5 2.1. For conducted emission at the mains terminals test 5 3. METHOD OF MEASUREMENT 6 3.1. Applicable Standard 6 3.2. Test Modes 6 3.3. MAXIMUM PERMISSIBLE EXPOSURE 6 4. TEST RESULT 7 4.1. Conducted Emission at the Mains Terminals Test 7 4.2. Equipment Approval Considerations: 8 4.3. E and H field Strength 9 5. Photographs of test set-up 10 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2008000614-1E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-009 Ver.：A.0 Page 4 of 14 1. GENERAL INFORMATION 1.1. Independent Operation Mode The basic operation mode is: 1.1.1. Charging 1.2. Test Supporting System Adapter Description : Adapter Model No. : BCTC-002 Power Input : AC 100-240V~50/60Hz Output: 5V 2A DC Line : Unshielded, Detachable 1m Mobile phone Model No. : iphone8P Model No. : iphone Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2008000614-1E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-009 Ver.：A.0 Page 5 of 14 2. LIST OF TEST AND MEASUREMENT INSTRUMENTS 2.1. For conducted emission at the mains terminals test Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. Exposure Level Tester Narda ELT-400 N-0231 Jul. 15, 2020 Jul. 14, 2021 Magnetic field probe 100cm2 Narda B-Field Probe 100cm2 M0675 Jul. 15, 2020 Jul. 14, 2021 843 Chamber ETS 843 84301 Aug. 27, 2018 Aug. 26, 2021 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2008000614-1E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-009 Ver.：A.0 Page 6 of 14 3. METHOD OF MEASUREMENT 3.1. Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1093 RF exposure is calculated. According KDB680106 D01v03: RF Exposure Wireless Charging Apps v02. 3.2. Test Modes Test Modes keeping TX+Charging mode 3.3. MAXIMUM PERMISSIBLE EXPOSURE Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2008000614-1E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-009 Ver.：A.0 Page 7 of 14 4. TEST RESULT 4.1. Conducted Emission at the Mains Terminals Test Note: Measurements should be made from all sides and the top of the primary/client pair, with the 15 cm measured from the center of the probe(s) to the edge of the device Test Procedure: a) The RF exposure test was performed on 360 degree turn table in anechoic chamber. b) The measurement probe was placed at test distance (15cm) which is between the edge of the charger and the geometric centre of probe. c) The turn table was rotated 360d degree to search of highest strength. d) The highest emission level was recorded and compared with limit as soon as measurement of each points (A, B, C, D, E) were completed. e) The EUT were measured according to the dictates of KDB 680106D01v03. Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2008000614-1E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-009 Ver.：A.0 Page 8 of 14 4.2. Equipment Approval Considerations: The EUT does comply with item 5(b) of KDB 680106 D01v03 1) Power transfer frequency is less than 1MHz Yes, the device operate in the frequency range from 112-220KHz 2) Out…

Text truncated - open the document above for the full version.

Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2008000614-2E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-013 Ver.：A.0 Page 1 of 21 FCC TEST REPORT FCC ID: 2AN8F-M2008Q Product Name: Esquire 5000mAh Power Bank+Wireless Charger with Cable BI Trademark: N/A Model Number: M2008Q EPB-ES20BK Prepared For : Shenzhen Mossloo Industrial Co., Ltd Address : Road One No.4, Science Industrial Park, Shangxue Village, Bantian Street, Longgang District, Shenzhen, China Prepared By : Shenzhen BCTC Testing Co., Ltd. Address : BCTC Building & 1-2F, East of B Building, Pengzhou Industrial, Fuyuan 1st Road, Qiaotou Community, Fuyong Street, Bao’an District, Shenzhen, China Test Date: Aug. 10, 2020 - Aug. 21, 2020 Date of Report : Aug. 21, 2020 Report No.: BCTC2008000614-2E Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2008000614-2E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-013 Ver.：A.0 Page 2 of 21 TABLE OF CONTENTS TEST REPORT DECLARATION .................................................................................................. 3 1. GENERAL INFORMATION ........................................................................................................ 4 1.1. Report information .......................................................................................................................... 4 1.2. Measurement Uncertainty .............................................................................................................. 4 1.3. Test Facility ...................................................................................................................................... 4 1.4. Test Uncertainty .............................................................................................................................. 4 2. PRODUCT DESCRIPTION ......................................................................................................... 5 2.1. EUT Description .............................................................................................................................. 5 2.2. Test mode ........................................................................................................................................ 5 2.3. Block Diagram of EUT Configuration ........................................................................................... 5 2.4. Test Conditions ................................................................................................................................ 6 2.5. Description Of Support Units (Conducted Mode) ....................................................................... 6 3. TEST RESULTS SUMMARY ..................................................................................................... 7 4. TEST EQUIPMENT USED .......................................................................................................... 8 4.1. For Conducted Emission Test ....................................................................................................... 8 4.2. For Radiated Emission Measurement ......................................................................................... 8 5. CONDUCTED EMISSION TEST ................................................................................................ 9 5.1. Block Diagram of Test Setup......................................................................................................... 9 5.2. Test Standard .................................................................................................................................. 9 5.3. Conducted Emission Limit ............................................................................................................. 9 5.4. EUT Configuration on Test ............................................................................................................ 9 5.5. Operating Condition of EUT ........................................................................................................ 10 5.6. Test Procedure .............................................................................................................................. 10 5.7. Test Result ..................................................................................................................................... 10 6. RADIATED EMISSION MEASUREMENT ............................................................................. 13 6.1. Block Diagram of Test Setup....................................................................................................... 13 6.2. Test Standard and Limit ............................................................................................................... 14 6.3. EMI Test Receiver Setup ............................................................................................................. 15 6.4. Test Procedure .............................................................................................................................. 15 6.5. Test Result ..................................................................................................................................... 15 7. EUT TEST PHOTOS .................................................................................................................. 19 8. EUT PHOTOS ............................................................................................................................. 21 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2008000614-2E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-013 Ver.：A.0 Page 3 of 21 TEST REPORT DECLARATION Applicant : Shenzhen Mossloo Industrial Co., Ltd Address : Road One No.4, Science Industrial Park, Shangxue Village, Bantian Street, Longgang District, Shenzhen, China EUT Description : Esquire 5000mAh Power Bank+Wireless Charger with Cable BI Model Number : M2008Q EPB-ES20BK Test Model : M2008Q Test Standards: FCC Part 15 C This device described…

Text truncated - open the document above for the full version.

Shenzhen BCTC Testing Co., Ltd. Conducted Measurement Photos Shenzhen BCTC Testing Co., Ltd. Radiated Measurement Photos 9KHz-30MHz 30MHz-1GHz