2AN8FMSL-M1022QDual Fast Wireless Charging Stand with Base

FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the fo llow ing two conditions: (1 ) this device may not cause harmfu l interfere nce, and (2 ) this device must accept any interfere nce re ceived, inc luding interfere nce that may cause undesire d opera tion. Any changes or modifications not expressl y approved by the part y re sponsible fo r compliance could void the user' s authority to opera te the eq uipment. NOTE: This equipment has been tested and fo und to comply with the limits fo r a Cl ass B digital device, purs uant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pro tection against harmfu l interfere nce in a residentia l installation. This equipment genera tes, uses and can ra diate ra dio frequency energy and, if not installed and used in accord ance with the instru ctions, may cause harmfu l i nterfere nce to radio communications. However, there is no guara ntee that interfere nce will not occur in a part icular installation. If this equipment does cause harmfu l interfere nce to radio or televis ion reception, which can be determined by turn ing the equipment off and on, the user is encoura ged to try to correct the interfere nce by one or more of the fo llowing measure s: -- Reori ent or re locate the re ceiving antenna. -- In cre a se the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circ uit differe nt from that to which the re ceiver is connected. -- Consult the dealer or an experi enced radio/TV technic ian fo r help. To maintain compliance with FCC’s RF Exposure guide lines, This equipment should be insta lled and opera ted with minimum distance between 20cm the ra diator your body: Use only the supplied antenna.

ShenZhen Mossloo Industrial CO., Ltd. 2021.08.16 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Dual Fast Wireless Charging Stand with Base Trademark: N/A MODEL : MSL-M1022Q FCC ID: 2AN8FMSL-M1022Q To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Orders Cheng / Manager Contact information / address: Road One No.4, Science Industrial Park, Shangxue Village, Bantian Street, Longgang District, Shenzhen, China

ShenZhen Mossloo Industrial CO., Ltd. 2021.08.16 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Orders Cheng / Manager Contact information / address: Road One No.4, Science Industrial Park, Shangxue Village, Bantian Street, Longgang District, Shenzhen, China

External Photos

Size:30*15mm Dual Fast Wireless Charging Stand with Base FCC ID: 2AN8FMSL-M1022Q Label location

Internal Photos Antenna Antenna

No.：BCTC/RF-EMC-005 Page 1 of 14 Edition：A.3 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2107813270-2E Applicant: ShenZhen Mossloo Industrial CO., Ltd. Product Name: Dual Fast Wireless Charging Stand with Base Model/Type Ref.: MSL-M1022Q Tested Date: 2021-07-07 to 2021-08-23 Issued Date: 2021-08-23 Report No.: BCTC2107813270-2E No.：BCTC/RF-EMC-005 Page 2 of 14 Edition：A.3 FCC ID : 2AN8FMSL-M1022Q The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: Dual Fast Wireless Charging Stand with Base Trademark: N/A Model/Type Ref.: MSL-M1022Q Prepared For: ShenZhen Mossloo Industrial CO., Ltd. Address: Road One No.4, Science Industrial Park, Shangxue Village, Bantian Street, Longgang District, Shenzhen, China Manufacturer: ShenZhen Mossloo Industrial CO., Ltd. Address: Road One No.4, Science Industrial Park, Shangxue Village, Bantian Street, Longgang District, Shenzhen, China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2021-07-07 Sample tested Date: 2021-07-07 to 2021-08-23 Issue Date: 2021-08-23 Report No.: BCTC2107813270-2E Test Standards: FCC CFR 47 part1, 1.1307(b), 1.1310 Test Results: PASS Tested by: Approved by: Lei Chen/Project Handler Zero Zhou/Reviewer Report No.: BCTC2107813270-2E No.：BCTC/RF-EMC-005 Page 3 of 14 Edition：A.3 TABLE OF CONTENT Test Report Declaration Page 1. VERSION ............................................................ 4 2. PRODUCT INFORMATION ............................................. 5 2.1 Product Information ..................................................... 5 2.2 Support Equipment ..................................................... 5 2.3 Test Mode ............................................................. 5 3. TEST FACILITY AND TEST INSTRUMENT USED ......................... 6 3.1 Test Facility ............................................................ 6 3.2 Test Instrument Used ................................................... 6 4. METHOD OF MEASUREMENT ......................................... 7 4.1 Applicable Standard..................................................... 7 4.2 Block Diagram Of Test Setup ............................................. 7 4.3 Limit .................................................................. 8 4.4 Test procedure ......................................................... 8 4.5 Equipment Approval Considerations....................................... 9 4.6 E and H field Strength .................................................. 10 5. PHOTOGRAPHS OF TEST SET-UP .................................... 11 (Note: N/A means not applicable) Report No.: BCTC2107813270-2E No.：BCTC/RF-EMC-005 Page 4 of 14 Edition：A.3 1. VERSION Report No. Issue Date Description Approved BCTC2107813270-2E 2021-08-23 Original Valid Report No.: BCTC2107813270-2E No.：BCTC/RF-EMC-005 Page 5 of 14 Edition：A.3 2. PRODUCT INFORMATION 2.1 Product Information Model/Type Ref.: MSL-M1022Q Model differences: N/A Operation Frequency: 115kHz-205kHz Antenna installation: Inductive loop coil antenna Ratings: Input: DC 5V/3A, 9V/2A Wireless Output (Top): 10W, 7.5W, 5W Wireless Output (Base): 5W 2. 2 Support Equipment No. Device Type Brand Model Series No. Note E-1 Dual Fast Wireless Charging Stand with Base N/A MSL-M1022Q N/A N/A E-2 Adapter N/A BCTC-002 N/A Auxiliary Notes: 1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. 2. 3 Test Mode . Test Modes1 Wireless Output (Top) 5W+ Wireless Output (Base) 5W Test Modes2 Wireless Output (Top) 7.5W+ Wireless Output (Base) 5W Test Modes3 Wireless Output (Top) 10W+ Wireless Output (Base) 5W* Report No.: BCTC2107813270-2E No.：BCTC/RF-EMC-005 Page 6 of 14 Edition：A.3 3. TEST FACILITY AND TEST INSTRUMENT USED 3.1 Test Facility All measurement facilities used to collect the measurement data are located at Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China. The site and apparatus are constructed in conformance with the requirements of ANSI C63.4 and CISPR 16-1-1 other equivalent standards. FCC Test Firm Registration Number: 712850 IC Registered No.: 23583 3.2 Test Instrument Used Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. Exposure Level Tester Narda ELT-400 N-0231 May 28, 2021 May 27, 2022 Electric and Magnetic Field Analyzer Narda EHP-200A 170WX910 06 May 28, 2021 May 27, 2022 Magnetic field probe 100cm2 Narda B-Field Probe 100cm2 M0675 May 28, 2021 May 27, 2022 843 Chamber ETS 843 84301 Aug. 27, 2020 Aug. 26, 2023 Report No.: BCTC2107813270-2E No.：BCTC/RF-EMC-005 Page 7 of 14 Edition：A.3 4. METHOD OF MEASUREMENT 4.1 Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1093 RF exposure is calculated. According KDB680106 D01v03: RF Exposure Wireless Charging Apps v02. 4.2 Block Diagram Of Test Setup Note: Measurements should be made from all sides and the top of the primary/client pair, with the 15 cm measured from the center of the probe(s) to the edge of the device Report No.: BCTC2107813270-2E No.：BCTC/RF-EMC-005 Page 8 of 14 Edition：A.3 4. 3 Limit 4. 4 Test procedure a) The RF exposure test w…

Text truncated - open the document above for the full version.

No.：BCTC/RF-EMC-005 Page 1 of 25 Edition：A.3 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2107813270-1E Applicant: ShenZhen Mossloo Industrial CO., Ltd. Product Name: Dual Fast Wireless Charging Stand with Base Model/Type Ref.: MSL-M1022Q Tested Date: 2021-07-07 to 2021-08-23 Issued Date: 2021-08-23 Report No.: BCTC2107813270-1E No.：BCTC/RF-EMC-005 Page 2 of 25 Edition：A.3 FCC ID : 2AN8FMSL-M1022Q The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: Dual Fast Wireless Charging Stand with Base Trademark: N/A Model/Type Ref.: MSL-M1022Q Prepared For: ShenZhen Mossloo Industrial CO., Ltd. Address: Road One No.4, Science Industrial Park, Shangxue Village, Bantian Street, Longgang District, Shenzhen, China Manufacturer: ShenZhen Mossloo Industrial CO., Ltd. Address: Road One No.4, Science Industrial Park, Shangxue Village, Bantian Street, Longgang District, Shenzhen, China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2021-07-07 Sample tested Date: 2021-07-07 to 2021-08-23 Issue Date: 2021-08-23 Report No.: BCTC2107813270-1E Test Standards: FCC Part15.209 ANSI C63.10-2013 Test Results: PASS Tested by: Approved by: Lei Chen/Project Handler Zero Zhou/Reviewer Report No.: BCTC2107813270-1E No.：BCTC/RF-EMC-005 Page 3 of 25 Edition：A.3 TABLE OF CONTENT Test Report Declaration Page 1. VERSION ............................................................ 4 2. TEST SUMMARY ..................................................... 5 3. MEASUREMENT UNCERTAINTY ....................................... 6 4. PRODUCT INFORMATION AND TEST SETUP............................ 7 4.1 Product Information ..................................................... 7 4.2 Test Setup Configuration ................................................ 7 4.3 Support Equipment ..................................................... 8 4.4 Test Mode ............................................................. 8 5. TEST FACILITY AND TEST INSTRUMENT USED ......................... 9 5.1 Test Facility ............................................................ 9 5.2 Test Instrument Used ................................................... 9 6. CONDUCTED EMISSIONS ............................................ 11 6.1 Block Diagram Of Test Setup ............................................ 11 6.2 Limit ................................................................. 11 6.3 Test procedure ........................................................ 11 6.4 EUT operating Conditions ............................................... 12 6.5 Test Result ........................................................... 13 7. RADIATED EMISSIONS .............................................. 15 7.1 Block Diagram Of Test Setup ............................................ 15 7.2 Limit ................................................................. 16 7.3 Test procedure ........................................................ 16 7.4 Test Result ........................................................... 18 8. ANTENNA REQUIREMENTS .......................................... 21 9. EUT PHOTOGRAPHS ................................................ 22 10. EUT TEST SETUP PHOTOGRAPHS .................................... 23 (Note: N/A means not applicable) Report No.: BCTC2107813270-1E No.：BCTC/RF-EMC-005 Page 4 of 25 Edition：A.3 1. VERSION Report No. Issue Date Description Approved BCTC2107813270-1E 2021-08-23 Original Valid Report No.: BCTC2107813270-1E No.：BCTC/RF-EMC-005 Page 5 of 25 Edition：A.3 2. TEST SUMMARY The Product has been tested according to the following specifications: No. Test Parameter Clause No Results 1 Conducted Emission 15.207 PASS 2 Radiated Emission 15.209 PASS 3 20dB Bandwidth 15.215 N/A 4 Antenna Requirement 15.203 PASS Report No.: BCTC2107813270-1E No.：BCTC/RF-EMC-005 Page 6 of 25 Edition：A.3 3. MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the Product as specified in CISPR 16-4-2. This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. No. Item Uncertainty 1 3m chamber Radiated spurious emission(9kHz-30MHz) U=3.7dB 2 3m chamber Radiated spurious emission(30MHz-1GHz) U=4.3dB 3 3m chamber Radiated spurious emission(1GHz-18GHz) U=4.5dB 4 3m chamber Radiated spurious emission(18GHz-40GHz) U=3.34dB 5 Conducted Emission(150kHz-30MHz) U=3.20dB 6 Conducted Adjacent channel power U=1.38dB 7 Conducted output power uncertainty Above 1G U=1.576dB 8 Conducted output power uncertainty below 1G U=1.28dB 9 humidity uncertainty U=5.3% 10 Temperature uncertainty U=0.59°C Report No.: BCTC2107813270-1E No.：BCTC/RF-EMC-005 Page 7 of 25 Edition：A.3 4. PRODUCT INFORMATION AND TEST SETUP 4.1 Product Information Model/Type Ref.: MSL-M1022Q Model differences: N/A Operation Frequency: 115kHz-205kHz Antenna installation: Inductive loop coil antenna Ratings: Input: DC 5V/3A, 9V/2A Wireless Output (Top): 10W, 7.5W, 5W Wireless Output (Base): 5W 4.2 Test Setup Configuration See test photographs attached in EUT TEST SETUP PHOTOGRAPHS for the actual connections between Product and support equipment. Conducted Emission: Radiated Spurious Emission: E-1 EUT E-1 EUT E-1 EUT E-1 EUT Report No.: BCTC2107813270-1E No.：BCTC/RF-EMC-005 Page 8 of 25 Edition：A.3 4.3 Support Equipment No. Device Type Brand Model Series No. Note E-1 Dual Fast Wireless Charging Stand with Base N/A MSL-M1022Q N/A N/A E-2 Adapter N/A BCTC-002 N/A Auxiliary E-3 Dummy load N/A DL01 N/A A…

Text truncated - open the document above for the full version.

Report No.: BCTC2107813270-1E No.：BCTC/RF-EMC-005 Page 23 of 25 Edition：A.3 10. EUT TEST SETUP PHOTOGRAPHS Conducted emissions Radiated Measurement Photos Report No.: BCTC2107813270-1E No.：BCTC/RF-EMC-005 Page 24 of 25 Edition：A.3 Report No.: BCTC2107813270-2E No.：BCTC/RF-EMC-005 Page 11 of 14 Edition：A.3 5. PHOTOGRAPHS OF TEST SET-UP 20cm 15cm Report No.: BCTC2107813270-2E No.：BCTC/RF-EMC-005 Page 12 of 14 Edition：A.3 15cm 15cm Report No.: BCTC2107813270-2E No.：BCTC/RF-EMC-005 Page 13 of 14 Edition：A.3 15cm