2ANDX-CS20X1Body Composition Scale

www.renpho.com/pages/002 This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Product : Body Composition Scale Model : CS20M

FCC ID: 2ANDX-CS20X1 Product Name: Body Composition Scale Model No.：CS20M,CS20A,CS20C1,CS20C2,CS20C3,CS10,CS10C,CS20B,CS20C,CS20D,CS20E, CS20F,CS20G, CS20H, CS20I, CS20J, CS20K, CS20X1,CS20X2, CS20X3, CS20L, CS20M,CS20N,CS20P,CS20M1,CS20M2,CS20M3,CS20W,CS20W1,CS20Q,CS2 0Q1US20E,CS20C1,FF20G,MF-BS02,ES-CS20M,ES-CS20C,HSF-1,SC101-Black , SC101-White,FF30G,BS412,BS414,BS416,BS418,BS600,BS602,BS650,BS652, US30HRC,US20M,US20E,US10C,sensit,sensit-mini,UNOTEC XCALE II,FitScale W5 BT， ABYON20N，GOLDEN WHEAT，ENERGY OATS，AS-01A，BCA-130， UNOTEC XCALE II，LC10， ES-CS20M，ES-CS20M-W，ES-26M-W，ES-26M-B， ES-28ML，ES-30M，ES-24M，ES-26BB-B， ES-26P3，ES-32MD，ES-BR001， ES-BR003，FT-24D，FT-24D-W，FT-26BB-B，FT-26H-B，FT-28WBL， MAES-28P1， ES-26P1，ES-26P2，ES-WBE28,ES-WBE28W，ES-26R-W,ES-26R-B, ES-26R-MG,FT-26R-W,FT-26R-B,FT-30D,NK-BTBASCULA，WS1，B11，B12，B14， B15，JL-001， 31400，31401，31402，31403，31406，1901.1902，HGSS-20， NX4501，GB10W，MYIA20C， A017-SC 01，A017-SCPRO01，S-5，IGBWS-864， 9BBF001，CS20H，H5010，Savvy ，Savvy plus， Slinky，Slinky Lite，ESF24， ESF17，ESF28，ESF38，ESF14，ESF18，Sophie，WMP-BTS1U， SECONDNATURE All models are electrically identical <Signature> Name Huang wenhai Title Manager Company Shenzhen Yolanda Technology Co.,Ltd.

Model No.: CS20M

59.5*39.5mm R1 50#亚银龙覆亚膜 黑色印刷 (1) This device may not cause harmful interference, and (2) this device must accept any interference received, includinginterference that may cause undesired operation. Product : Body Composition Scale Model : CS20M Made in China Max : 180kg/396lbs d=0.05kg/0.2lb Power : 3*AAA batteries FCC ID : 2ANDX-CS20X1 Serial NO.:A0012022891 SHENZEN YOLANDA TECHNOLOGY CO,.LTD Adress: Room 201,Jinfulai Building, No.49-1, Dabao Road,Dalang Area,Xinan Street,Baoan, Shenzhen Website: www.yolanda.hk Service Line: 400-998-2913 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

Model No.: CS20M

RF Exposure Evaluation Statement Product Name: Body Composition Scale Model No.：CS20M FCC ID：2ANDX-CS20X1 1.1 RF Exposure Compliance Requirement 1.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied. 1.1.2 Limits The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation 17 The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion 1.1.3 EUT RF Exposure Operational Mode: BLE Channel Maximum Peak Conducted Output Power (dBm) Tune up tolerance (dB) Maximum tune-up Power Calculated value Exclusion threshold (dBm) (mW) 2402 0.95 ±1 1.95 1.57 0.49 3 2442 0.57 ±1 1.57 1.44 0.45 2480 0.02 ±1 1.02 1.26 0.40 Conclusion: the calculated value ≤3.0, SAR is exempted.

Page 1 of54 BlueAsia of Technical Services(Shenzhen) Co.,Ltd. Add:Building C, No. 107, Shihuan Road, Shiyan Sub-District, Baoan District, Shenzhen, Guangdong Province, China Tel: +86-755-23059481 Email: [email protected] TEST REPORT Product Name : Body Composition Scale Brand Mark : NA Model No. : CS20M Report Number : BLA-EMC-202103-A9101 Date of Sample Receipt : 2021/3/24 Date of Test : 2021/3/24 to 2021/4/23 Date of Issue : 2021/4/23 FCC ID : 2ANDX-CS20X1 Test Standard : 47 CFR Part 15, Subpart C 15.247 Test Result : Pass Prepared for: Shenzhen Yolanda Technology Co., Ltd Room 201, Jinfulai Building, No.49-1, Dabao Road, Dalang Area, Xinan Street, Baoan, Shenzhen Prepared by: BlueAsia of Technical Services(Shenzhen) Co.,Ltd. Building C, No. 107, Shihuan Road, Shiyan Sub-District, Baoan District, Shenzhen, Guangdong Province, China TEL: +86-755-23059481 Compiled by: Review by: Approved by: Date: 2021/4/23 Report No.: BLA-EMC-202103-A9101 Page 2 of54 BlueAsia of Technical Services(Shenzhen) Co.,Ltd.Tel: +86-755-23059481 Email: [email protected] REPORT REVISE RECORD Version No. Date Description 00 2021/4/23 Original Report No.: BLA-EMC-202103-A9101 Page 3 of54 BlueAsia of Technical Services(Shenzhen) Co.,Ltd.Tel: +86-755-23059481 Email: [email protected] TABLE OF CONTENTS 1 TEST SUMMARY ........................................................................................................................................5 2 GENERAL INFORMATION .........................................................................................................................6 3 GENERAL DESCRIPTION OF E.U.T. .........................................................................................................6 4 TEST ENVIRONMENT ................................................................................................................................7 5 TEST MODE ................................................................................................................................................7 6 MEASUREMENT UNCERTAINTY ..............................................................................................................7 7 DESCRIPTION OF SUPPORT UNIT...........................................................................................................8 8 LABORATORY LOCATION .........................................................................................................................8 9 TEST INSTRUMENTS LIST ........................................................................................................................9 1 CONDUCTED BAND EDGES MEASUREMENT ..................................................................................... 12 1.1 LIMITS ................................................................................................................................................................... 12 1.2 BLOCK DIAGRAM OF TEST SETUP .......................................................................................................................... 12 1.3 TEST DATA .............................................................................................................................................................. 13 2 RADIATED SPURIOUS EMISSIONS ....................................................................................................... 14 2.1 LIMITS ................................................................................................................................................................... 14 2.2 BLOCK DIAGRAM OF TEST SETUP .......................................................................................................................... 15 2.3 PROCEDURE .......................................................................................................................................................... 15 2.4 TEST DATA .............................................................................................................................................................. 17 3 ANTENNA REQUIREMENT ..................................................................................................................... 25 3.1 CONCLUSION ............................................................................................................................................................ 25 4 RADIATED EMISSIONS WHICH FALL IN THE RESTRICTED BANDS................................................. 26 4.1 LIMITS ................................................................................................................................................................... 26 4.2 BLOCK DIAGRAM OF TEST SETUP .......................................................................................................................... 27 4.3 PROCEDURE .......................................................................................................................................................... 27 4.4 TEST DATA .............................................................................................................................................................. 29 5 CONDUCTED SPURIOUS EMISSIONS .................................................................................................. 33 5.1 LIMITS ................................................................................................................................................................... 33 5.2 BLOCK DIAGRAM OF TEST SETUP .......................................................................................................................... 33 5.3 TEST DATA .............................................................................................................................................................. 34 Report No.: BLA-EMC-202103-A9101 Page 4 of54 BlueAsia of Technical Services(Shenzhen) Co.,Ltd.Tel: +86-755-23059481…

Text truncated - open the document above for the full version.

Model No.: CS20M