2ANJHSS100KXRoku Keypad

• Roku Smart Home mobile app • Philips screwdriver (optional) What’s included What you’ll need • Roku Keypad* • AA batteries (x3) • Screw kit (optional) STEP 1: Open the Roku Smart Home app Sign in with your Roku account. STEP 2: Add your keypad In the Roku Smart Home app, tap the “+” button, then “Add device” to find “Keypad.” STEP 3: Finish setup Follow the instructions in the app to complete setup and installation. NOTE: You’ll need to set up a Roku Monitoring Hub (sold separately) before installing your keypad. Visit go.roku.com/monitoring for more information. Messaging & data rates may apply. You’ll need Smartphone & app Let’s get startedMonitoring your home yourself? Put your home in good hands with 24/7 professional monitoring. Subscription required Live agent response Round-the-clock agents contact you immediately when an alarm is triggered in your home and send assistance if you can’t respond. One-tap emergency assistance A single tap in the Roku Smart Home mobile app contacts a live agent who will get help to your home as quickly as possible. Continue on back * For indoor use only. Quick Start Guide Keypad For a smarter (and safer) home Explore Roku sensors, cameras, and automated lights for extra peace of mind. Learn more at go.roku.com/smarthome Need help? © 2023 Roku, Inc. All rights reserved. Roku, the Roku logo, and the Roku Smart Home logo are the trademarks or registered trademarks of Roku, Inc. Visit go.roku.com/monitoring Setup videos Common questions Tips and tricks 4100000961_01 •Do not expose any element of the Product to smoke, steam, high temperatures, high humidity, direct sunlight, or excessive low or freezing temperatures. •Do not place any element of the Product on the floor or in a place where they may cause someone to trip or stumble. •Do not place naked flame sources, such as lighted candles, on or near the Product. •Do not drop or crush the Product. •Do not clean with chemical cleaners. Use a soft, dry cloth. •Do not place Product directly on oil or wax based wood finished surfaces. •Dispose of the Product according to local standards and regulations Additional Legal Notices Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Oper ation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution Any changes or modificat ions not expre ssl y approved by Roku , Inc. could void the user’s authority to operate this equipment. Important Note FCC Radiat ion Exposure Statement This equipment complies with FCC radiat ion exposure l imits set fo rth fo r an uncontro lled enviro nment. This equipment should be installed and operated with minimum distance 2 0cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or t ransmitter. Apple and App Store are trademarks of Apple Inc., registered in the U.S. and other countries and regions. Amazon, Alexa a nd all related logos are t rademarks of Amazon.com, I nc. o r i ts affiliates. Alexa e nabled device is required to work with Alexa. Google, Google Play, and Google Home are trademarks of Google LLC. Google Assistant-enabled device required. Third party features and services may be subject to change or removal without notice. A Roku account is required to activate your Product. Please read and keep all safety and use instructions. Important Product Information Safety Precautions Any electrical device, if used improperly, has the potential for causing fire, electrical shock, property damage or personal injury. To help ensure accident-free and enjoyable operation, follow these guidelines: •Observe all warnings, precautions, and instructions. •Regularly inspect all elements of the Product for damage. •If the Product has been damaged, cracked or punctured, or if the Product functions in an abnormal manner, produces unusual sounds, or smells or becomes hot, immediately stop use, unplug any power adaptors or cables from the electrical outlet and disconnect any other cables. •Observe all signs and displays that require an electrical device or RF radio product to be switched off in designated areas. For more information on product safety and troubleshooting, please go to support.roku.com. Use and Handling • The Product is not a toy. Product packaging may include plastic bags, mounting hardware, and fasteners. •Dispose of these properly and keep them out of reach of children and pets, as they could present a choking hazard. •Do not puncture, crush, or damage any element of the Product. •Do not attempt to repair or disassemble your Product yourself. Doing so may cause injury, overheating, fire, or damage not covered by the Limited Warranty, or electric shock or injury to you. Roku TM Keypad, known as th…

Text truncated - open the document above for the full version.

Rev 1/26/2023 TianJin HuaLai Technology Co.,Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023/3/23 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2ANJHSS100KX TianJin HuaLai Technology Co.,Ltd. (“Guoqing Wang”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, ------------------------------- Guoqing Wang Rev 1/26/2023 TianJin HuaLai Technology Co.,Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023/3/23 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2ANJHSS100KX TianJin HuaLai Technology Co.,Ltd. (“Guoqing Wang”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, ------------------------------- Guoqing Wang

TianJin H No.10 Jin Date: 03/ Federal C Authoriza 7435 Oa Columbia Grantee US TianJin H Agent, LL 2ANJHS TianJin HuaLai Technology Co.,Ltd. United S t marketing Commiss later. FCC US the desi g Technolo 2ANJHS Designa t Company FRN: 003 Address: Contact P Phone: 7 Email: Su Sincerely Company Company Signatur e HuaLai Tech nPing Road, Y /23/2023 Communicat ation and Ev kland Mills R a, MD 21046 Code: 2ANJ S Agen HuaLai Techn LC to accept S100MX; FC tates for no l g and import sion-related a Agent, LLC, gnated agent ogy Co.,Ltd.fo S100KX; FC ted Agent In y Name: FCC 33402884 3722 Illinoi s Person: Tim 708-571-3148 upport@FCC y, y: TianJin HuaLai Technology Co.,Ltd. y Representa e: nology Co.,L Ya An Street tions Comm valuation Div Road 6 JH t – Atte nology Co.,L t service of p CC ID: 2ANJ ess than one tation of the a administrativ accepts as o t for the purp or (FCC ID: 2 CC ID: 2ANJ nformation: C US Agent, s Avenue, Sa Payne 8 CUSAgent.co ative: Guoqin Ltd. ,Nankai Distr ission vision station Ltd.certifies, t process on ou JHSS100KX , accepts to maintain an agent of service of process in the e year after e applicable eq ve or judicial of the date o pose of accep 2ANJHSS10 HSS100EX) LLC aint Charles, om ng Wang rict Tianjin, C Statem that as of [DA ur behalf for ; FCC ID: 2 A either the gra quipment wit proceeding i of the filing of pting service 00BX; FCC I ). IL, 60174, U Designat Designat Signature China ent / Pa ATE], we hav (FCC ID: 2A ANJHSS100 antee has pe thin the U.S. involving the f this applica e of process o D: 2ANJHSS USA ted Agent: FC ted Agent Re e: art 2.91 ve designate ANJHSS100B EX). ermanently te , or the conc e equipment, ation, the obli on behalf of S100MX; FC CC US Agen epresentative 1(d)(7) ed FCC US BX; FCC ID: erminated all clusion of any whichever is igation of bei TianJin Hua CC ID: nt, LLC e: Tim Payne : l y s ing Lai e

TianJin HuaLai Technology Co.,Ltd. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2023/3/23 SUBJECT: FCC Application for (FCC ID: 2ANJHSS100KX) To Whom It May Concern: I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. I understand the following FCC requirements: 1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the User’s Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards, TianJin HuaLai Technology Co.,Ltd. ------------------------------- Guoqing Wang

\\192.168.0.6\rf无线2\3.2023年案件\3月\邓飘\2.15-C230131001-LCSA021423043E-陈婉君-keypad-FCCID\form\POA_Letter.docx TianJin HuaLai Technology Co.,Ltd. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2023/3/23 SUBJECT: FCC Application for (FCC ID: 2ANJHSS100KX) To Whom It May Concern: We, the undersigned, hereby authorize Gavin Liang at Shenzhen LCS Compliance Testing Laboratory Ltd. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Shenzhen LCS Compliance Testing Laboratory Ltd.on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, ------------------------------- Guoqing Wang

Rev 11/20/07 TianJin HuaLai Technology Co.,Ltd. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2ANJHSS100KX Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram “Block Diagram.pdf” Schematics “Schematic.pdf” Operational Description “Operation Description.pdf” The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: confidentiality period is 180 days. Exhibit Type File Name User Manual “User Manual.pdf” External Photos “External Photos.pdf” Internal Photos “Internal Photos.pdf” Test Setup Photos “Test Setup Photos.pdf” Sincerely, ------------------------------- Guoqing Wang

Page 1 of 3 FCC ID: 2ANJHSS100KX Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity External Photos of the EUT Fig. 1 Fig. 2 Page 2 of 3 FCC ID: 2ANJHSS100KX Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 3 FCC ID: 2ANJHSS100KX Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6

Page 1 of 1 FCC ID: 2ANJHSS100KX Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Label and Location Size: L: 4.0cm*W: 1.33cm Label Location

Page 1 of 4 FCC ID: 2ANJHSS100KX Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Internal Photos of the EUT Fig. 1 Fig. 2 Page 2 of 4 FCC ID: 2ANJHSS100KX Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Antenna Page 3 of 4 FCC ID: 2ANJHSS100KX Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 4 FCC ID: 2ANJHSS100KX Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8

Page 1 of 4 FCC ID: 2ANJHSS100KX Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC RF Exposure Evaluation 1. Product Information Product name Roku Keypad Test Model SS100KX Power Supply DC 4.5V By 3*AA Battery Hardware Version KP3U-P1.0-V1.3 Software Version 6.1.0.93 Frequency Range 906.8MHz, 910MHZ, 913.2MHz Channel Number 3 Modulation Type GFSK Antenna Description FPC Antenna, 0.283dBi (max.) Exposure category General population/uncontrolled environment EUT Type Production Unit Device Type Mobile Devices Page 2 of 4 FCC ID: 2ANJHSS100KX Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 2.Evaluation method and Limit Systems operating under the provisions of FCC 47 CFR section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as mobile device whereby a distance of 0.2m normally can be maintained between the user and the device, and below RF Permissible Exposure limit shall comply with. In accordance with KDB447498D01 for Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modelled or measured field strengths or power density, is ≤ 1.0. The MPE ratio of each antenna is determined at the minimum test separation distance required by the operating configurations and exposure conditions of the host device, according to the ratio of field strengths or power density to MPE limit, at the test frequency. Either the maximum peak or spatially averaged results from measurements or numerical simulations may be used to determine the MPE ratios. Spatial averaging does not apply when MPE is estimated using simple calculations based on far-field plane-wave equivalent conditions. The antenna installation and operating requirements for the host device must meet the minimum test separation distances required by all antennas, in both standalone and simultaneous transmission operations, to satisfy compliance. 3. Limit 3. 1 Refer Evaluation Method ANSI C95.1–2019: IEEE Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz FCC KDB publication 447498 D01 General 1 RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1091: Radiofrequency radiation exposure evaluation: mobile devices. 3. 2 Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100) * (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Uncontrolled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100) * (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequency in MHz *=Plane-wave equivalent power density Page 3 of 4 FCC ID: 2ANJHSS100KX Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 4. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 5. Antenna Information EUT can only use antennas certificated as follows provided by manufacturer; Antenna type and antenna number Operate frequency band Maximum antenna gain Notes FPC Antenna 906.8-913.2MHz 0.283dBi SRD Antenna Page 4 of 4 FCC ID: 2ANJHSS100KX Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 6. Conducted Power Test Procedure TX frequency range: 906.8MHz, 910MHZ, 913.2MHz Mode Channel Frequency (MHz) Field Strength (dBuV/m @3m) Maximum Conducted Output Power (dBm) GFSK 1 906.8 81.58 -13.58 2 910 79.29 -15.87 3 913.2 84.31 -10.85 Field Strength: dBuV/m @3m Maximum Conducted Output Power: EIRP=E-104.7+20logD=E-104.7+20log3 Turn-up Channel Channel 1 Channel 2 Channel 3 Target (dBm) -13.0 -15.0 -10.0 Tolerance ± (dB) 1.0 1.0 1.0 7. Evaluation Results As declared by the Applicant, the EUT is a wireless device used in a fix application, at least 20 cm from any body part of the user or nearby persons; from the maximum EUT RF output power, the minimum separation distance, r =20cm, as well as the gain of the used antenna refer to antenna information, the RF power density can be obtained. [SRD] Modulation Type Outp…

Text truncated - open the document above for the full version.

SPECIFICATION SPECIFICATION SHEET FORAPPROVAL （ Revision ： R ： A1 ） CUSTOMERTianjin HualTechnology Co., LTD CS P/NKEYPAD（A304-031F） PART NAME FPC Antenna FREQUENCY 906.8-913.2MHz ZTX NO.1.03.02510 DATE 2022-01-22 CUSTOMER QA CHECKED ME CHECKED RF CHECKED MANAGER CHECKED ZHONG TIAN XUN TECHNOLOGY CO., LTD MANAGER CHECKED MANAGER CHECKED ME CHECKED RF CHECKED LISTER Yilin ZouMeng He Address: No.34, ShilongAvenue, Shiyan Town, Baoan District, Shenzhen, (Tengda Industrial Park) 518000 Tel.: 0755-27588320Fax: 0755-27588045http://www.chinaztx.com Remark(备注)： Sign(客户确认签字盖章)： ANTENNASPECIFICATION CUSP/N:KEYPAD （ A304-031F ）WIFIAntenna ApplicationDate:Jan,22,2022Rev:R:A1 ZTXP/N:KEYPAD （ A304-031F ）WIFIAntenna Editor:Page 1 of8 Revisionhistory NODateState A12022-01-22Thefirstedition ANTENNASPECIFICATION CUSP/N:KEYPAD （ A304-031F ）WIFIAntenna ApplicationDate:Jan,22,2022Rev:R:A1 ZTXP/N:KEYPAD （ A304-031F ）WIFIAntenna Editor:Page 2 of8 Index Revisionhistory 1 lndex 2 1MechanicalSpecification 3 1-1 MechanicalSpecification(WIFIAntenna) 3 2Antennatestdata 4 2-1VSWR&Returnlossplot&SmithChart 4 2-2No-sourcetestdata 5 2-3Directionaldrawingofhorizontalplaneof 5 2-43Dradiationdrawing 5 2-5Matchingcircuit 5 2-6Environmenttreatment 5 3TestReport 6 4Salt-Spraytest 7 5EnvironmentCharacteristic 8 ANTENNASPECIFICATION CUSP/N:KEYPAD （ A304-031F ）WIFIAntenna ApplicationDate:Jan,22,2022Rev:R:A1 ZTXP/N:KEYPAD （ A304-031F ）WIFIAntenna Editor:Page 3 of8 1.MechanicalSpecification 1-1MechanicalConfiguration(WIFIAntenna) ANTENNASPECIFICATION CUSP/N:KEYPAD （ A304-031F ）WIFIAntenna ApplicationDate:Jan,22,2022Rev:R:A1 ZTXP/N:KEYPAD （ A304-031F ）WIFIAntenna Editor:Page 4 of8 2.Antennatestdata 2-1VSWR&Returnlossplot ANTENNASPECIFICATION CUSP/N:KEYPAD （ A304-031F ）WIFIAntenna ApplicationDate:Jan,22,2022Rev:R:A1 ZTXP/N:KEYPAD （ A304-031F ）WIFIAntenna Editor:Page 5 of8 2-2No-sourcetestdata 2-3Directionaldrawingofhorizontalplaneof 2-43Dradiationdrawing 2-5Matchingcircuit N/A 2-6Environmenttreatment N/A ANTENNASPECIFICATION CUSP/N:KEYPAD （ A304-031F ）WIFIAntenna ApplicationDate:Jan,22,2022Rev:R:A1 ZTXP/N:KEYPAD （ A304-031F ）WIFIAntenna Editor:Page 6 of8 3.TestReport customername TianjinHualai product name KEYPAD（A304-031F） quantity5pcs Product material FPC Material color blackdate2021/1/23 Producttype:█newlookproduct□changelookproduct□massproduction□others NO Dimensionsare requiredforthe engineering drawings Measuredsizejudgeremarks 12345OK/NG 1 44.22±0.2044.2544.2344.2244.2144.20 OK 2 17.90±0.2017.9117.8917.9217.9217.89 OK 3 0.130.130.130.130.130.13 OK 4 5 6 7 8 9 10 surface:OK Performance:grid,bending,adhesiontestOK Totaljudgment: OK□NG Approval:WuRuiyong Review:,YiAilingmade:LiuXiaoqing Remarks: FormNumber:ZTX-QR-QA-016Version:A1 ANTENNASPECIFICATION CUSP/N:KEYPAD （ A304-031F ）WIFIAntenna ApplicationDate:Jan,22,2022Rev:R:A1 ZTXP/N:KEYPAD （ A304-031F ）WIFIAntenna Editor:Page 7 of8 4.Salt-Spraytest customer name TianjinHualai product name KEYPAD（A304-031F） WIFIAntenna date2020/11/11 Product material FPC proving time 48Hquantity5PCS time quantum testconditiontestcriteria bear fruit Remarks 0-6Hours Saltspraytester: saltliquid:NaCl(no water);concentration 5%±1%;pHvalue: 6.5~7.2;laboratory temperature:32-38°C; compressedair pressure:1.0±0.01 (KG/M2)Spray amount: 1.0~2.0ML/80CM2/H. Relativehumidity: 85%±2%;placement angleoftestproduct: 30degrees+/-10 degrees;saltspray duration:48h, Productsurfacewithoutrust point,oxidation,corrosion, coating(coating)layeroffand otheradversephenomena OK 2020.11.09 16:00AM beginning 6-12Hours 12-18 Hours 18-24 Hours 24-30 Hours 2020.11.11 16:00AM stop 30-36 Hours 36-42 Hours 42-48 Hours Morethan 48hours Theproductsurfacewithoutrust point,oxidation,corrosion, coating(coating)layeroff1%of theproductarea conclusionSaltSprayTestOK testclerkLiQingliexamineandverifyYiAilingRatifyHuChunmei ANTENNASPECIFICATION CUSP/N:KEYPAD （ A304-031F ）WIFIAntenna ApplicationDate:Jan,22,2022Rev:R:A1 ZTXP/N:KEYPAD （ A304-031F ）WIFIAntenna Editor:Page 8 of8 5.EnvironmentCharacteristic NO.ITEMTESTCONDITIONSPECIFICATION 5-1 HighTemperature/Humidity StorageTest(nonoperating) 1.Temperature:+70±2°C 2.Humidity:90~95%RH 3.Time:48hrs Nomaterialdeformationis allowed. TheVSWR,Gain,Radiation Patternmustbemet specificationsafterthesetest. 5-2 LowTemperature/Humidity StorageTest(nonoperating) 1.Temperature:-30±2°C 2.Humidity:0%RH 3.Time:48hrs

Page 1 of 33 FCC ID: 2ANJHSS100KX Report No.: LCSA021423043EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT FOR TianJin HuaLai Technology Co.,Ltd. Roku Keypad Test Model: SS100KX Prepared for : TianJin HuaLai Technology Co.,Ltd. Address : No.10 JinPing Road, Ya An Street,Nankai District Tianjin, China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : February 15, 2023 Number of tested samples : 2 Sample No. : A021423043-1, A021423043-2 Sample number : Prototype Date of Test : February 15, 2023 ~ March 16, 2023 Date of Report : March 16, 2023 Page 2 of 33 FCC ID: 2ANJHSS100KX Report No.: LCSA021423043EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT FCC CFR 47 PART 15 C (15.249) Report Reference No. ................. : LCSA021423043EA Date of Issue................................... : March 16, 2023 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ........................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure .......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ......................... : TianJin HuaLai Technology Co.,Ltd. Address ........................................... : No.10 JinPing Road, Ya An Street,Nankai District Tianjin, China Test Specification Standard ......................................... : FCC CFR 47 PART 15 C(15.249) / ANSI C63.10: 2013 Test Report Form No. ..................... : LCSEMC-1.0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. .................. : Roku Keypad Trade Mark ..................................... : Roku Test Model ...................................... : SS100KX Ratings ............................................ : DC 4.5V By 3*AA Battery Result ........................................... : Positive Compiled by: Supervised by: Approved by: Vera Deng/Administrator Cary Luo/ Technique principal Gavin Liang/ Manager Page 3 of 33 FCC ID: 2ANJHSS100KX Report No.: LCSA021423043EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 3…

Text truncated - open the document above for the full version.