
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Manufacturer Address: 202, Building A2, Silicon Valley Power Intelligent Terminal Industrial Park, No. 20, Dafu Industrial Zone, Kukeng Community, Guanlan Street, Longhua District, Shenzhen China Manufacturer Name : Shenzhen Yunji Intelligent Technology CO., LTD Android is a trademark of Google LLC. The power delivered by the charger must be between min 0.3 Watts required by the radio equipment, and max 10 Watts in order to achieve the maximum charging speed. 0.3-10 W G6 User Manual www.oukitel.com 1 Receiver light distance sensor Type-c speaker grille MIC Touch screen Front camera Battery Warning Accessories G6 includes an internal battery.You can track your battery status with the icon showed on the top right of the screen. Use only OUKITEL -approved batteries specifically designed for you phone. Incompatible batteries can cause serious iniuries or damage to your phone. Never place batteries or phones on or in heating devices such as microwave ovens , stoves , or radiators . Batteries may explode when overheated. 2 Huge Battery Fast Charging 3 Rear main camera Secondary camera Fingerprint Flash SIM Card Power key Volume + Volume - 4 How to insert the card With the device facing up , insert the cardholder into the device in the direction of the arrow. To make sure your device is able to make calls , insert the SIM card in the following order. insert and press the ejector pin into the hole in the side to pop the card tray. 2 SIM1 Card SIM2 Card SIM2 Card 5 How to boot How to send SMS , MMS SMS MMs-video Ianguage switching settings SAR Non-removable battery Press the power button for 3-5 seconds to boot Open the SMS app Select New Information Enter a phone number or browse your contacts Select Edit Information and enter your text Send When writing a text message Select images, videos, or other files you want to add even you can take a new picture or video right away Selecting or sending Main menu-settings system--language and input method Language and input method--language--language adding Select the language you need, the system Will automatically jump back to the language interface Select the icon after the language bar and drag it to the first one The maximum electromagnetic Specific Absorption Rate (SAR) In line with the requirements of the national standard EN62209-1:2016; EN 62209-2:2010; EN 62479:2010; EN 50360:2017; EN 50566:2017; 6 Safety - In order to ensure safety during use of the product , you must strictly abide by the follow The pad should be at least 15cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket. Do not expose the device and other batteries together with high temperatures or heat-generating equipment such as sunlight , heaters , microwave ovens , ovens , or water heaters. Overheating of the battery can cause an explosion When charging is complete or not charging , disconnect the charger from the device and unplug the charger from the outlet. If the device is equipped with a non-removable battery , do not replace the battery by yourself to avoid damaging the battery or the device. Use of an unapproved or incompatible power source, charger, or battery may cause fire, explosion, or other hazards. Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage, overheating, fire or explosion. Do not drop, crush, scratch, or puncture the battery to avoid subjecting the battery to excessive external pressure, Which may result in internal short-circuit and overheating of the battery. The company does not bear responsibility for accidents caused by non-standard related charging equipment. If you want to read the full CE compliance, please check this 7 Thoroughly understand the maintenance of this device to use the device more safely and effectively, and extend the service life of the device as much as possible. Please follow the instructions in the manual to open the device, disassemble the accessories, and do not try other Please avoid dropping, knocking, or shaking your device. Rough handling of the device can cause the screen to rupture, damaging the internal circuit board and the delicate structure. Do not use chemical solvents or detergents to clean your device. Wipe the device case with a soft cotton cloth dampened with water and mild soap. Clean the lens with a clean, dry, soft cloth. ( Example camera lens) and display. When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life. Maintenance 8 1.Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss. 2. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BYAN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDINGTO THE INSTRUCTIONS . 3. The product shall only be connected to a USB interface of version USB2.0 . 4. Adapter shall be installed near the equipment and shall be easily accessible. 5. Operation temperature: -20°C to 55°C. 6. The plug considered as disconnect device of adapter. 7. SAR: The device complies with RF specifications when the device used at 5mm requirements. Restrictions in the 5 GHz band: radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ),Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain(ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania(LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria(AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK),Finland (FI), Sweden (SE), the Turkey (TR), Norway(NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI). The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5250 MHz English ESLUROCZFRHUSI DKHRBEBGDEEEIE ELIT Cy LVLTSKMT NLA…
Text truncated - open the document above for the full version.
Page 1 of 9 Report No.: STS2511230 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Photo 1 Photo 2 Page 2 of 9 Report No.: STS2511230 Photo 3 Photo 4 Antenna Antenna Page 3 of 9 Report No.: STS2511230 Photo 5 Photo 6 Page 4 of 9 Report No.: STS2511230 Photo 7 Photo 8 Page 5 of 9 Report No.: STS2511230 Photo 9 Photo 10 Page 6 of 9 Report No.: STS2511230 Photo 11 Photo 12 Page 7 of 9 Report No.: STS2511230 Photo 13 Photo14 Page 8 of 9 Report No.: STS2511230 Photo15 Photo16 Page 9 of 9 Report No.: STS2511230 Photo17 Photo18
Page 1 of 3 FCC ID: 2ANMU-G6 Setup photo AC Conduction RF Conduction Page 2 of 3 FCC ID: 2ANMU-G6 RE (Below 30MHz) RE (Below 1GHz) Page 3 of 3 FCC ID: 2ANMU-G6 RE (Above 1GHz) LOOP
The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2511230W08 Issued for SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA SHENZHEN, China Product Name: Smart Phone Brand Name: OUKITEL Model Name: G6 Series Model(s): G6 S, G6 Pro, G6 Plus, G6 Ultra, G6 TITAN, G6 GT FCC ID: 2ANMU-G6 Test Standards: FCC Part15.247 Page 2 of 93 Report No.: STS2511230W08 TEST REPORT Applicant’s Name ................. : SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address .................................. : A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA SHENZHEN, China Manufacturer's Name ........... : SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address .................................. : 2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA SHENZHEN, China Product Description Product Name ........................ : Smart Phone Brand Name ........................... : OUKITEL Model Name ........................... : G6 Series Model(s) .................... : G6 S, G6 Pro, G6 Plus, G6 Ultra, G6 TITAN, G6 GT Standards ............................. : FCC Part15.247 Test Procedure ....................... : ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ............................... : Date of receipt of test item ......... : 27 Nov. 2025 Date (s) of performance of tests : 27 Nov. 2025 ~ 04 Jan. 2026 Date of Issue ............................. : 04 Jan. 2026 Test Result ................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 93 Report No.: STS2511230W08 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.2 DESCRIPTION OF THE TEST MODES 10 2.3 FREQUENCY HOPPING SYSTEM REQUIREMENTS 10 2.4 TABLE OF PARAMETERS OF TEST SOFTWARE SETTING 12 2.5 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 2.6 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 13 2.7 EQUIPMENTS LIST 14 3. EMC EMISSION TEST 15 3.1 CONDUCTED EMISSION MEASUREMENT 15 3.2 RADIATED EMISSION MEASUREMENT 19 4. CONDUCTED SPURIOUS & BAND EDGE EMISSION 31 4.1 LIMIT 31 4.2 TEST PROCEDURE 31 4.3 TEST SETUP 31 4.4 EUT OPERATION CONDITIONS 31 4.5 TEST RESULTS 31 5. NUMBER OF HOPPING CHANNEL 32 5.1 LIMIT 32 5.2 TEST PROCEDURE 32 5.3 TEST SETUP 32 5.4 EUT OPERATION CONDITIONS 32 5.5 TEST RESULTS 32 6. AVERAGE TIME OF OCCUPANCY 33 6.1 LIMIT 33 6.2 TEST PROCEDURE 33 6.3 TEST SETUP 33 6.4 EUT OPERATION CONDITIONS 33 6.5 TEST RESULTS 33 7. HOPPING CHANNEL SEPARATION MEASUREMEN 34 7.1 LIMIT 34 Page 4 of 93 Report No.: STS2511230W08 Table of Contents Page 7.2 TEST PROCEDURE 34 7.3 TEST SETUP 34 7.4 EUT OPERATION CONDITIONS 34 7.5 TEST RESULTS 34 8. BANDWIDTH TEST 35 8.1 LIMIT 35 8.2 TEST PROCEDURE 35 8.3 TEST SETUP 35 8.4 EUT OPERATION CONDITIONS 35 8.5 TEST RESULTS 35 9. OUTPUT POWER TEST 36 9.1 LIMIT 36 9.2 TEST PROCEDURE 36 9.3 TEST SETUP 37 9.4 EUT OPERATION CONDITIONS 37 9.5 TEST RESULTS 37 10. ANTENNA REQUIREMENT 38 10.1 STANDARD REQUIREMENT 38 10.2 EUT ANTENNA 38 APPENDIX 1-TEST DATA 39 DWELL TIME 39 MAXIMUM PEAK CONDUCTED OUTPUT POWER 49 -20DB BANDWIDTH 55 CARRIER FREQUENCIES SEPARATION 60 NUMBER OF HOPPING CHANNEL 66 BAND EDGE 69 BAND EDGE(HOPPING) 76 CONDUCTED RF SPURIOUS EMISSION 83 APPENDIX 2-PHOTOS OF TEST SETUP 93 Page 5 of 93 Report No.: STS2511230W08 Revision History Rev. Issue Date Report No. Effect Page Contents 00 04 Jan. 2026 STS2511230W08 ALL Initial Issue Page 6 of 93 Report No.: STS2511230W08 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247(a)(1) Hopping Channel Separation PASS -- 15.247(a)(1)&(b)(1) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247(d) Conducted Spurious & Band Edge Emission PASS -- 15.247(a)(1)(iii) Number of Hopping Frequency PASS -- 15.247(a)(1)(iii) Dwell Time PASS -- 15.247(a)(1) Bandwidth PASS -- 15.205 Restricted bands of operation PASS -- Part 15.247(d)/part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- Note: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Page 7 of 93 Report No.: STS2511230W08 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.751dB 2 Unwanted Emissions, conducted ±2.888dB 3 All emissions, radiated 9K-30MHz ±2.48dB 4 All emissions, radiated 30M-1GHz ±2.52dB 5 All emissions, radiated 1G-18GHz ±3.48dB 6 All emissions, radiated>18GHz ±4.18dB 7 Conducted Emission (9KHz-150KHz) ±2.48dB 8 Conducted Emission (150KHz-30MHz) ±2.52dB 9 Occupied Channel Bandwidth ±3.6% 10 Duty Cycle ±3.2% Pa…
Text truncated - open the document above for the full version.
ShenzhenQixinTongdaTechnologyCo.,Ltd Antennatestdatareport Client:Och project:S187 G2/3/5/8+W1/2/4/5/8+ FDD-1/2/3/4/5/7/8/12/17/19/20/25/26/28/66+TDD-38/40/41 Engineering:Jason(13760255827) date:2025-12-19 Factoryaddress:Bao'anDistrict,Shenzhen,ShajingStreet,ShayiNorth YongfaScienceandTechnologyPark,thefirstthirdfloor 1.TestProject 2.TestEquipment Agilent5071B(SParameter(RL/VSWR)TestEquipment) TestProjectEquipment 1.SParameter1.ReturnLoss(RL) 2.VSWR NetworkAnalyzer: Agilent5071B 2.RFTest (2/3/4/5G) 1.power 2.level 3.TRP/TIS ComprehensiveTest: SP9500/CMW500/8960 TestEnvironment: AnechoicChamber SP9500(5GTestEquipment) Agilent8960( 2G/3GTestEquipment ) CMW500(2G/3G/4GTestEquipment) 3.TestEnvironment MicrowaveAnechoicChamber 4.TestSteps PassiveVSWR/RLTestSteps: Gain/EfficiencyTestSteps: ActiveTRP/TISTestSteps: 50 Ω CoaxialCable 90mmLength CopperPipe 5071BNetwork Analyzer TestFixture OpenComputerOTA TestSoftware OpenTurntableSwitch AndResetTozero Open8960/CMW500 TestEquipment TestmobilephoneinserttestSIM cardandPutintothemicrowave darkroomtoconnect OTASoftwareautomatic testing OutputData OpenComputer Gain/Efficiency TestSoftware OpenTurntableSwitch AndResetTozero Open5071B TestEquipment PuttheTestedobjectintothe microwavedarkroomtoconnect OTASoftwareautomatic testing OutputData 5.Antennasizediagram 6.AntennaGain FrequencyBand Gain(dBi) GSM850(824-894MHz) -2.25 GSM900(880-960MHz) -1.16 DCS1800(1710-1880MHz) 0.23 PCS1900(1850-1990MHz) 0.19 WCDMA850(824-894MHz) -2.25 WCDMA900(880-960MHz) -1.16 WCDMA1700(1710-2155MHz) 0.21 WCDMA1900(1850-1990MHz) 0.19 WCDMA2100(1920-2170MHz) 0.17 FDDB1(1920-2170MHz) 0.17 FDDB2(1850-1990MHz) 0.19 FDDB3(1710-1880MHz) 0.23 FDDB4(1710-2155MHz) 0.24 FDDB5(824-894MHz) -2.25 FDDB7(2500-2690MHz) 0.33 FDDB8(880-960MHz) -1.16 FDDB12(699-746MHz) -2.45 FDDB17(704-746MHz) -2.45 FDDB19(830-890MHz) -2.26 FDDB20(791-862MHz) -2.27 FDDB25(1850-1995MHz) 0.15 FDDB26(814-894MHz) -2.25 FDDB28(703-803MHz) -2.53 FDDB66(1700-2200MHz) 0.25 TDDB38(2570-2620MHz) 0.33 TDDB40(2300-2400MHz) 0.35 TDDB41(2496-2690MHz) 0.33 Bluetooth 0.25 WIFI-2.4G 0.25 WIFI-5G 0.33 GPS 0.10 8.2D&3DLobeDiagram GPS-L1 BT 2.4G-WIFI 5.1G-WIFI 5.8G-WIFI 9.IntroductiontoAntennaInformation S187 Antennatypeandfrequencyband MAINANTENNA(PIFA):2G/3G/4G DIVANTENNA(PIFA):2G/3G/4G GPS/WIFI/BTANTENNA(PIFA):L1/2.4GWIFI/5G WIFI/BT AntennamateriaFPC
The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. SAR Test Report Report No.: STS2511230H02 Issued for SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA SHENZHEN, China Product Name: Smart Phone Brand Name: OUKITEL Model Name: G6 Series Model(s): G6 S, G6 Pro, G6 Plus, G6 Ultra, G6 TITAN, G6 GT FCC ID: 2ANMU-G6 Test Standard: ANSI/IEEE Std. C95.1 FCC 47 CFR Part 2 (2.1093) IEEE Std. 1528-2013 Max. Report SAR (1g) Head: 0.328 W/kg Body: 0.642 W/kg Page 2 of 164 Report No.: STS2511230H02 TEST REPORT CERTIFICATION Applicant’s name ................. : SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address ................................. : A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA SHENZHEN, China Manufacturer's Name .......... : SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address ................................. : A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA SHENZHEN, China Product description Product name ........................ : Smart Phone Brand name ......................... : OUKITEL Model name ......................... : G6 Series Model .......................... : G6 S, G6 Pro, G6 Plus, G6 Ultra, G6 TITAN, G6 GT Standards ............................. : ANSI/IEEE Std. C95.1 FCC 47 CFR Part 2 (2.1093) IEEE Std. 1528-2013 The device was tested by Shenzhen STS Test Services Co., Ltd. in accordance with the measurement methods and procedures specified in KDB 865664 The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Date of Test ........................................... : Date (s) of performance of tests ............. : 17 Dec. 2025 ~ 22 Dec. 2025 Date of Issue .......................................... : 24 Dec. 2025 Test Result.............................................. : Pass Testing Engineer : (Xin.Liu) Technical Manager : (Shifan. Long) Authorized Signatory : (Bovey Yang) Page 3 of 164 Report No.: STS2511230H02 Table of Contents 1. General Information 5 1.1 EUT Description 5 1.2 Test Environment 7 1.3 Test Factory 7 2. Test Standards and Limits 8 3. SAR Measurement System 9 3.1 Definition of Specific Absorption Rate (SAR) 9 3.2 SAR System 9 4. Tissue Simulating Liquids 12 4.1 Simulating Liquids Parameter Check 12 5. SAR System Validation 16 5.1 Validation System 16 5.2 Validation Result 17 6. SAR Evaluation Procedures 18 7. EUT Antenna Location Sketch 19 7.1 SAR test exclusion consider table 20 8. EUT Test Position 23 8.1 Define Two Imaginary Lines on the Handset 23 8.2 Hotspot mode exposure position condition 24 9. Uncertainty 25 9.1 Measurement Uncertainty 25 10. Conducted Power Measurement 28 10.1 Test Result 28 11. EUT and Test Setup Photo 58 11.1 EUT Photo 58 11.2 Setup Photo 61 12. SAR Result Summary 67 12.1 Head SAR 67 12.2 Body-worn and Hotspot SAR 70 12.3 Simultaneous Multi-band Transmission Evaluation 73 13. Equipment List 75 Appendix A. System Validation Plots 76 Appendix B. SAR Test Plots 92 Appendix C. Probe Calibration and Dipole Calibration Report 164 Page 4 of 164 Report No.: STS2511230H02 Revision History Rev. Issue Date Report No. Effect Page Contents 00 24 Dec. 2025 STS2511230H02 ALL Initial Issue Page 5 of 164 Report No.: STS2511230H02 1. General Information Environmental evaluation measurements of specific absorption rate (SAR) distributions in emulated human head and body tissues exposed to radio frequency (RF) radiation from wireless portable devices for compliance with the rules and regulations of the U.S. Federal Communications Commission (FCC). 1.1 EUT Description Product Name Smart Phone Brand Name OUKITEL Model Name G6 Series Model G6 S, G6 Pro, G6 Plus, G6 Ultra, G6 TITAN, G6 GT Model Difference Only the model names are different Sample number 251127010-1 Battery Model: S187 Brand: OUKITEL Rated Voltage: 3.87V Charge Limit Voltage: 4.45V Capacity: 10600mAh Device Category Portable Product stage Production unit RF Exposure Environment General Population / Uncontrolled Hardware Version J557A_9230TMB_D4XUF_V1.1 Software Version OUKITEL_G6_NFC_EEA_V01_20251117 Frequency Range GSM 850: 824 MHz ~ 849 MHz PCS1900: 1850 MHz ~ 1910 MHz WCDMA Band 2: 1850 MHz ~ 1910 MHz WCDMA Band 4:1710 MHz ~ 1755 MHz WCDMA Band 5: 824 MHz ~ 849 MHz LTE Band 2: 1850 MHz ~ 1910 MHz LTE Band 4: 1710 MHz ~ 1755 MHz LTE Band 5: 824 MHz ~ 849 MHz LTE Band 7:2500 MHz ~ 2570 MHz LTE Band 12: 699 MHz ~ 716 MHz LTE Band 17: 704 MHz ~ 716 MHz LTE Band 25: 1850 MHz ~ 1915 MHz LTE Band 26: 814 MHz ~ 824 MHz / 824 MHz ~ 849 MHz LTE Band 66: 1710 MHz ~ 1780 MHz WLAN802.11b/g/n20: 2412 MHz ~ 2462 MHz WLAN 802.11n40: 2422 MHz ~ 2452 MHz WLAN 802.11a/n20/n40/ac20/ac40/ac80: 5150 ~ 5250 MHz WLAN 802.11a/n20/n40/ac20/ac40/ac80: 5725 ~ 5850 MHz Bluetooth: 2402 MHz to 2480 MHz Max. Reported SAR(1g): (Limit:1.6W/kg) Test distance: Head:0mm Body:10mm Band Mode Head (W/kg) Body Worn and Hotspot(W/kg) PCE GSM 850 0.058 0.327 PCE GSM 1900 0.038 0.550 PCE WCDMA Band 2 0.050 0.520 PCE WCDMA Band 4 0.104 0.421 PCE WCDMA Band 5 0.131 0.458 PCE LTE Band 2 0.132 0.507 PCE LTE Band 4 0.074 0.472 PCE LTE Band 5 0.105 0.356 Page 6 of 164 Report No.: STS2511230H02 PCE LTE Band 7 0.128 0.642 PCE LTE Band 12 0.082 0.361 PCE LTE Band 17 0.055 0.433 PCE LTE Band 25 0.044 0.417 PCE LTE Band 26 0.063 0.327 PCE LTE Band 66 0.059 0.348 DTS 2.4G WLAN 0.077 0.138 DSS BT 0.045 0.054 NII 5.2G WLAN 0.255 0.235 NII 5.8G WLAN 0.328 0.240 1-g Sum SAR 0.460 0.877 FCC Equipment Class Licensed Portable Transmitter Held to Ear (PCE) Part 15 Spread Spectrum Transmitter (DSS) Digital Transmission System (DTS) Unlicensed National Information Infrastructure …
Text truncated - open the document above for the full version.