2ANMU-OT13Tablet

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – EquipmentType Company name: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address: A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN,LONGHUA SHENZHEN, China Product Name: Tablet FCC ID: 2ANMU-OT13 Model(s): OT13, OT13 S, OT13 Pro, OT13 Plus, OT13 Ultra, OT13 TITAN, OT13 GT, OT13 TI 2.911(d)(5)(i) EquipmentType We, [SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Gaolei Yan Date: 12/25/2025 Title and Company name: Manager / SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD 2.911 (d)(5)(i) Equipment Type Attestation v1.2 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address: A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN,LONGHUA SHENZHEN, China Product Name: Tablet FCC ID: 2ANMU-OT13 Model(s): OT13, OT13 S, OT13 Pro, OT13 Plus, OT13 Ultra, OT13 TITAN, OT13 GT, OT13 TI 2.911(d)(5)(ii) Applicant filing We, [SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 ,established pursuant to §1.50002 of this chapter,as an entity producing coveredcommunications equipment. Yours sincerely, Name: Gaolei Yan Date: 12/25/2025 Title and Company name: Manager / SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD 2.911 (d)(5)(ii) Applicant Attestation v1.3 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the- communications-supply-chain-through-the

(SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD) U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Baihetian Innovative Solutions FRN: 0033401605 Contact Name: Kenneth Young Street Address: 6837 Chase Rd City/Province/Zip: Dearborn, MI 48126 Telephone No: 313-395-3113 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: April 22, 2024 Signed by (Printed Name/Title): Kenneth Young/ Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Grantee Code: 2ANMU FCC ID：2ANMU-OT13 Contact Name: Gaolei Yan Street Address:A22FBUILDINGENETNEW INDUSTRIALPARK,DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA City/Province/Zip: SHENZHEN,China Telephone No: 0755-61156588 Email: [email protected] Applicant Signature: Date:2024.5.21 Signed by (Printed Name/Title): Gaolei Yan/ Manager

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Family models declaration letter. 12/25/2025 We Company: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address: A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN,LONGHUA SHENZHEN, China Model Name: V40S Family Model: OT13, OT13 S, OT13 Pro, OT13 Plus, OT13 Ultra, OT13 TITAN, OT13 GT, OT13 TI We (Burmester Home Audio GmbH) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.), same mechanical structure and design (including product enclosure, materials, etc.), All models are the same circuit and RF module, except for model names. Thanks Sincerely, Signature [Name] Gaolei Yan [Title] manager [email protected]

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2025/12/24 Subject; Request for Confidentiality FCC ID: 2ANMU-OT13 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Signature: Name: Gaolei Yan Title: Manager Email: [email protected]

Letter of Authorization Company: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address: A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN,LONGHUA SHENZHEN, China Product Name: Tablet Model Number: OT13, OT13 S, OT13 Pro, OT13 Plus, OT13 Ultra, OT13 TITAN, OT13 GT, OT13 TI FCC Identifier: 2ANMU-OT13 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Gaolei Yan Date: 2025.12.24 Title: Manager Signature of applicant:

Model:OT13 ： FCC ID2ANMU-OT13 210-219746 ADF 23 0072 210 IMEI 1: 357890190000001 IMEI 2: 357890190000021 S/N:OT1300000000001 AFB 256 GB YK 24GB(6+18) 标签尺寸40*30

Page 1 of 79 Report No.: N25102502205E FCC SAR EVALUATION REPORT In accordance with the requirements of FCC 47 CFR Part 2(2.1093), ANSI/IEEE C95.1-1992 and IEEE Std 1528-2013 Product Name： Tablet Trademark： OUKITEL Model Name： OT13 Family Model： OT13 S, OT13 Pro, OT13 Plus, OT13 Ultra, OT13 TITAN, OT13 GT, OT13 TI Report No.： N25102502205E FCC ID： 2ANMU-OT13 Prepared for SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN,LONGHUA SHENZHEN, China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. No. 24 Xinfa East Road, Xiangshan Community, Xinqiao Street, Baoan District, Shenzhen, Guangdong, People's Republic of China Tel. 0755-23200050 Website: http://www.ntek.org.cn Page 2 of 79 Report No.: N25102502205E TEST RESULT CERTIFICATION Applicant’s name ................. : SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address ................................. : A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN,LONGHUA SHENZHEN, China Manufacturer's Name ..................................... : SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address ................................. : A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN,LONGHUA SHENZHEN, China Product description Product name ........................ : Tablet Trademark ............................ : OUKITEL Model Name ......................... : OT13 Family Model ......................... : OT13 S, OT13 Pro, OT13 Plus, OT13 Ultra, OT13 TITAN, OT13 GT, OT13 TI Standards ............................. : FCC 47 CFR Part 2(2.1093) ANSI/IEEE C95.1-1992 IEEE Std 1528-2013 Published RF exposure KDB procedures This device described above has been tested by Shenzhen NTEK. In accordance with the measurement methods and procedures specified in IEEE Std 1528-2013 and KDB 865664 D01. Testing has shown that this device is capable of compliance with localized specific absorption rate (SAR) specified in FCC 47 CFR Part 2(2.1093) and ANSI/IEEE C95.1-1992. The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK, this document may be altered or revised by Shenzhen NTEK, personal only, and shall be noted in the revision of the document. Test Sample Number .............................. S2510280135-1# Date of Test Date (s) of performance of tests ............. : Oct. 28, 2025~Nov. 13, 2025 Date of Issue .......................................... : Dec. 10, 2025 Test Result .............................................. : Pass Prepared By : Reviewed By : Approved By : Owen Xiao (Project Engineer) Aaron Cheng (Supervisor) Alex Li (Manager) Page 3 of 79 Report No.: N25102502205E ※ ※ Revision History ※ ※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release Dec. 10, 2025 Owen Xiao Page 4 of 79 Report No.: N25102502205E TABLE OF CONTENTS 1. General Information .......................................................................................... 6 1.1. RF exposure limits .................................................................................. 6 1.2. Statement of Compliance ....................................................................... 7 1.3. EUT Description ..................................................................................... 7 1.4. Test specification(s) ................................................................................ 8 1.5. Ambient Condition ................................................................................. 8 Facilities .......................................................................................................... 8 1.5.1. Laboratory Accreditations And Listings ............................................ 8 2. SAR Measurement System ................................................................................. 9 2.1. SATIMO SAR Measurement Set-up Diagram ........................................... 9 2.2. Robot ................................................................................................... 10 2.3. E-Field Probe ........................................................................................ 11 2.3.1. E-Field Probe Calibration ................................................................ 11 2.4. SAM phantoms .................................................................................... 12 2.4.1. Technical Data ................................................................................ 13 2.5. Device Holder ...................................................................................... 14 2.6. Test Equipment List .............................................................................. 15 3. SAR Measurement Procedures ........................................................................ 17 3.1. Power Reference.................................................................................. 17 3.2. Area scan & Zoom scan ........................................................................ 17 3.3. Description of interpolation/extrapolation scheme ............................. 19 3.4. Volumetric Scan ................................................................................... 19 3.5. Power Drift .......................................................................................... 19 4. System Verification Procedure ......................................................................... 20 4.1. Tissue Verification ................................................................................ 20 4.1.1. Tissue Dielectric Parameter Check Results ..................................... 21 4.2. System Verification Procedure ............................................................. 22 4.2.1. System Verification Resu…

Text truncated - open the document above for the full version.

Page 62 of 79 Report No.: N25102502205E Page 63 of 79 Report No.: N25102502205E Page 64 of 79 Report No.: N25102502205E Page 65 of 79 Report No.: N25102502205E Page 66 of 79 Report No.: N25102502205E Page 67 of 79 Report No.: N25102502205E ________________________ Page 68 of 79 Report No.: N25102502205E Page 69 of 79 Report No.: N25102502205E Page 70 of 79 Report No.: N25102502205E Page 71 of 79 Report No.: N25102502205E Page 72 of 79 Report No.: N25102502205E Page 73 of 79 Report No.: N25102502205E Page 74 of 79 Report No.: N25102502205E Page 75 of 79 Report No.: N25102502205E Page 76 of 79 Report No.: N25102502205E Page 77 of 79 Report No.: N25102502205E <Justification of the extended calibration> If dipoles are verified in return loss (<-20dB, within 20% of prior calibration for below 3GHz, and <-8dB, within 20% of prior calibration for 5GHz to 6GHz), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Head 2450MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -29.27 - 53.6 - Feb. 21, 2024 -25.738 12.07 55.969 2.369 Feb. 13, 2025 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 78 of 79 Report No.: N25102502205E <Head 5200MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -9.64 - 25.8 - Feb. 21, 2024 -9.494 1.51 26.574 0.774 Feb. 13, 2025 The return loss is <-8dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 79 of 79 Report No.: N25102502205E <Head 5800MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -14.91 - 38.53 - Feb. 21, 2024 -15.039 0.865 40.791 2.261 Feb. 13, 2025 The return loss is <-8dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data _____________________________________ END_______________________________________

Report No.: N25102502216E Version.1.3 Page 1 of 78 RADIO TEST REPORT FCC ID: 2ANMU-OT13 Product: Tablet Trade Mark: OUKITEL Model No.: OT13 Family Model: OT13 S, OT13 Pro, OT13 Plus, OT13 Ultra, OT13 TITAN, OT13 GT, OT13 TI Report No.: N25102502216E Issue Date: Dec. 01, 2025 Prepared for SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN,LONGHUA SHENZHEN, China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. No. 24 Xinfa East Road, Xiangshan Community, Xinqiao Street, Baoan District, Shenzhen, Guangdong, People's Republic of China Tel. 0755-23200050 Website: http://www.ntek.org.cn Report No.: N25102502216E Version.1.3 Page 2 of 78 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 10 6.2 SUPPORT EQUIPMENT............................................................................................................................... 11 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 12 7 TEST REQUIREMENTS .................................................................................................................................... 14 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 14 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 17 7.3 6DB BANDWIDTH ....................................................................................................................................... 26 7.4 DUTY CYCLE ............................................................................................................................................... 27 7.5 PEAK OUTPUT POWER .............................................................................................................................. 29 7.6 POWER SPECTRAL DENSITY ................................................................................................................... 30 7.7 CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 32 7.8 SPURIOUS RF CONDUCTED EMISSIONS................................................................................................ 33 7.9 ANTENNA APPLICATION .......................................................................................................................... 34 8 TEST RESULTS ................................................................................................................................................... 35 8.1 1M .................................................................................................................................................................. 35 8.2 2M .................................................................................................................................................................. 57 Report No.: N25102502216E Version.1.3 Page 3 of 78 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address ....................................... : A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN,LONGHUA SHENZHEN, China Manufacturer's Name .................. : SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address ....................................... : A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN,LONGHUA SHENZHEN, China Product description Product name .............................. : Tablet Trade Mark .................................. : OUKITEL Model and/or type reference ...... : OT13 Family Model ............................... : OT13 S, OT13 Pro, OT13 Plus, OT13 Ultra, OT13 TITAN, OT13 GT, OT13 TI Test Sample number ................... : S2510280136-1# Date (s) of performance of tests .................. : Oct. 25, 2025 ~ Dec. 01, 2025 Measurement Procedure Used: APPLICABLE STANDARDS APPLICABLE STANDARD/ TEST PROCEDURE TEST RESULT FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C ANSI C63.10-2020 KDB 558074 D01 15.247 Meas Guidance v05r02 Complied This device described above has been tested by Shenzhen NTEK Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of Shenzhen …

Text truncated - open the document above for the full version.

Report No.: N25102502218E Version.1.3 Page 1 of 88 FCC RADIO TEST REPORT FCC ID: 2ANMU-OT13 Product: Tablet Trade Mark: OUKITEL Model No.: OT13 Family Model: OT13 S, OT13 Pro, OT13 Plus, OT13 Ultra, OT13 TITAN, OT13 GT, OT13 TI Report No.: N25102502218E Issue Date: Dec. 01, 2025 Prepared for SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN,LONGHUA SHENZHEN, China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. No. 24 Xinfa East Road, Xiangshan Community, Xinqiao Street, Baoan District, Shenzhen, Guangdong, People's Republic of China Tel. 0755-23200050 Website: http://www.ntek.org.cn Report No.: N25102502218E Version.1.3 Page 2 of 88 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 10 6.2 SUPPORT EQUIPMENT............................................................................................................................... 11 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 12 7 TEST REQUIREMENTS .................................................................................................................................... 14 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 14 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 17 7.3 6DB BANDWIDTH ....................................................................................................................................... 27 7.4 DUTY CYCLE ............................................................................................................................................... 29 7.5 MAXIMUM OUTPUT POWER .................................................................................................................... 30 7.6 POWER SPECTRAL DENSITY ................................................................................................................... 32 7.7 CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 34 7.8 SPURIOUS RF CONDUCTED EMISSIONS................................................................................................ 36 7.9 ANTENNA APPLICATION .......................................................................................................................... 37 8 TEST RESULTS ................................................................................................................................................... 38 8.1 DUTY CYCLE .................................................................................................................................................. 38 8.2 MAXIMUM CONDUCTED OUTPUT POWER ....................................................................................................... 45 8.3 -6DB BANDWIDTH .......................................................................................................................................... 46 8.4 OCCUPIED CHANNEL BANDWIDTH .................................................................................................................. 53 8.5 MAXIMUM POWER SPECTRAL DENSITY LEVEL ............................................................................................... 60 8.6 BAND EDGE .................................................................................................................................................... 67 8.7 CONDUCTED RF SPURIOUS EMISSION ............................................................................................................. 76 Report No.: N25102502218E Version.1.3 Page 3 of 88 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address ....................................... : A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN,LONGHUA SHENZHEN, China Manufacturer's Name .................. : SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address ....................................... : A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN,LONGHUA SHENZHEN, China Product description Product name .............................. : Tablet Model and/or type reference ..... : OT13 Family Model ............................... : OT13 S, OT13 Pro, OT13 Plus, OT13 Ultra, OT13 TITAN, OT13 GT, OT13 TI Sample number S2510280136-1# Date of Test Oct. 25, 2025 ~ Dec. …

Text truncated - open the document above for the full version.

Report No.: N25102502218E Version.1.3 Page 67 of 88 8.6 BAND EDGE Condition Mode Frequency (MHz) Antenna Max Value (dBc) Limit (dBc) Verdict NVNT b 2412 Ant1 -46.7 -30 Pass NVNT b 2462 Ant1 -56.87 -30 Pass NVNT g 2412 Ant1 -31.38 -30 Pass NVNT g 2462 Ant1 -40.37 -30 Pass NVNT n20 2412 Ant1 -33.38 -30 Pass NVNT n20 2462 Ant1 -38.45 -30 Pass NVNT n40 2422 Ant1 -31.09 -30 Pass NVNT n40 2452 Ant1 -34.55 -30 Pass Report No.: N25102502218E Version.1.3 Page 68 of 88 Test Graphs Band Edge NVNT b 2412MHz Ant1 Ref Band Edge NVNT b 2412MHz Ant1 Emission Report No.: N25102502218E Version.1.3 Page 69 of 88 Band Edge NVNT b 2462MHz Ant1 Ref Band Edge NVNT b 2462MHz Ant1 Emission Report No.: N25102502218E Version.1.3 Page 70 of 88 Band Edge NVNT g 2412MHz Ant1 Ref Band Edge NVNT g 2412MHz Ant1 Emission Report No.: N25102502218E Version.1.3 Page 71 of 88 Band Edge NVNT g 2462MHz Ant1 Ref Band Edge NVNT g 2462MHz Ant1 Emission Report No.: N25102502218E Version.1.3 Page 72 of 88 Band Edge NVNT n20 2412MHz Ant1 Ref Band Edge NVNT n20 2412MHz Ant1 Emission Report No.: N25102502218E Version.1.3 Page 73 of 88 Band Edge NVNT n20 2462MHz Ant1 Ref Band Edge NVNT n20 2462MHz Ant1 Emission Report No.: N251…

Text truncated - open the document above for the full version.