2ANMU-WP10Smart Phone

WP10 WP Series Redefine Outdoor Communication! https://www.oukitel.com Manufacturer Name: ShenZhen YunJi Intelligent Technology CO., LTDManufacturer Address: A-side A2 Building 2/F Enet New Industrial Park,No.20 Dafu Industrial Zone, Aobei Community, GuanLan, LongHua New District, ShenZhen China Battery Warning 18W Fast Charging Accessories WP10 includes an internal battery.You can track your battery status with the icon showed on the top right of the screen. Use only OUKITEL-approved batteries specifically designed for you phone. Incompatible batteries can cause serious injuries or damage to your phone. Never place batteries or phones on or in heating devices such as microwave ovens,stoves,or radiators.Batteries may explode when overheated. EN 8000 mAh EN Comes with the Google TM app and Google Chrome TM . Android is a trademark of Google LLC Comes with the Google TM app and Google Chrome TM . Android is a trademark of Google LLC Quick Charger Type-C Cable 1 Huge Battery OTG Cable Earphone Convert Cable 2 Front Camera Type-C&Earphone Mic Custom Key Bright LED Light Secondary Camera Flash Light Speaker Rear Camera SIM Card Volume+Volume- Power Key NFC Infrared Light Infrared Light SMS MMS-video or How to insert the card How to boot How to send SMS,MMS Non-removable batteryPress the power button for 3-5 seconds to boot 1 23 Language switching settings 4 SAR 5 To make sure your smartphone be able to call,put the SIM card in the following order. Open the SMS app Select New InformationEnter a phone number or browse your contacts Select Edit Information and enter your text SendWhen writing a text messageSelect images,videos or other files you want to add,even you can take a new picture or video right away.Selecting or sendingThe maximum electromagnetic radiation absorption ratio(SAR)of this product is < 2.0W/kgIn line with the requirements of the national standard EN 50360:2017; EN 50566:2017; EN62209-1:2016; EN 62209-2:2010; EN 62479:2010;Main menu --settings-system setting--language and input method Language and input method--language--language addingSelect the language you need,the system will automatically jump back to the language interfaceSelect the icon after the language bar and drag it to the first one. Press the card pin into the side hole and then the card tray pops up and pull out it.Take out the card slot and place the Nano card or Nano card Make sure the bevel angle is aligned with the bevel angle of the card slot and placed in the corresponding card slot.with the phone facing up,insert the card holder into the phone in the direction of the arrow 6,0 1 M 1 2 EN EN Comes with the Google TM app and Google Chrome TM . Android is a trademark of Google LLC Comes with the Google TM app and Google Chrome TM . Android is a trademark of Google LLC 34 SIM SIM 10 1 M Safety-In order to ensure safely usingthe product, you must strictly abide bythe following rules 6 Maintenance 7 The phone should be at least 15 cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket. If you encounter an abnormal image such as a crash during use, the processing method is as follows: For a mobile phone that cannot remove the battery, please press and hold the power button for more than 12 seconds,the mobile phone will be forced to restart(unlock the phone when restarting) It can solve the general bug; for the mobile phone that can remove the battery,please remove the battery,then insert the battery and restart it to solve the bug.Clean the lens with a clean,dry, soft cloth. (Example:camera lens) and display.When the charger is not in use, please unplug it from the power outlet.Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.This machine’s standard package (package box --mobile phone--manual--protective film--USB data cable -- charger)Do not use chemical solvents or detergents to clean your phone. Wipe the phone case with a soft cotton cloth dampened with water or a mild soap.Please avoid falling,knocking or shaking your phone.Rough handling of the phone can cause the screen to rupture, damaging the internal circuit board and the delicate structure.Please follow the instructions in the manual to open the phone, disassemble the accessories,and do not try other methods.Thoroughly understand the maintenance of this mobile phone to use the mobile phone more safely and effectively,and extend the service life of the mobile phone as much as possible. Do not expose the device and other batteries together with the high temperatures or heat-generating equipment such as sunlight,heaters,microwave ovens,ovens or waterheaters.Overheating of the battery can cause an explosion.When charging is complete or not charging,disconnect the charger from the device and unplug the charger from the power outlet.If the device is equipped with a non-removable battery,do not replace the battery yourself to avoid damaging the battery or device.Use of an unapproved or incompatible power source,charger or battery may cause fire,explosion or other hazards.The company does not bear the responsibility for accidents caused by non-standard related charging equipment.If you want to read the full CE accompliance,please checkthis link:https://www.oukitel.comDo not drop, crush, scratch or puncture the battery to avoid subjecting the battery to excessive external pressure,resulting in internal short-circuit and overheating of the battery.Do not disassemble or reset the battery,insert other objects, immerse in water or other liquids to avoid battery leakage, overheating,fire or explosion. EN EN Comes with the Google TM app and Google Chrome TM . Android is a trademark of Google LLC Comes with the Google TM app and Google Chrome TM . Android is a trademark of Google LLC 56 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipme…

Text truncated - open the document above for the full version.

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD A-SIDE A2 BUILDING 2/F ENET NEW INDUSTRIAL PARK, NO.20 DAFU INDUSTRIAL ZONE, AOBEI COMMUNITY, GUANLAN, LONGHUA NEW DISTRICT,SHENZHEN CHINA Date: Jan 20, 2021 FCC ID: 2ANMU-WP10 Model Number: WP10 To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD, declare that this EUT (FCC ID: 2ANMU-WP10) will conduct FCC compliance testing, the testing just for FM broadcast, Band V GSM/WCDMA and LTE/NR function, the SDOC part recognized test lab(Shenzhen NTEK Testing Technology Co., Ltd.( ShenZhen Lab.). 1/F, Building E, Fenda Science Park, Sanwei Community,Xixiang Street Bao’an District, Shenzhen 518126 P.R. China) Please contact me if you have any question. Sincerely, Signatory 2021/01/20 Junfeizhao SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address: A-SIDE A2 BUILDING 2/F ENET NEW INDUSTRIAL PARK,NO.20 DAFU INDUSTRIAL ZONE, AOBEI COMMUNITY, GUANLAN, LONGHUA NEW DISTRICT,SHENZHEN CHINA Phone: +86‐755‐83834509 Fax: +86‐755‐83838762 Email: [email protected]

Rev 11/20/07 (SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD) Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2ANMU-WP10 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name  Block Diagram  Schematic Diagram  Operational Description  Parts Component  Tune-up Procedure  PCB Layout  Block diagram  Schematic Diagram  Operational Description  Parts Component  Tune-up Procedure  PCB Layout-1  PCB Layout-2 The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application for180 days as outlined below: Exhibit Type File Name  Test Setup Photos  Test Setup Photos  Test Setup Photos  Test Setup Photos  Test Setup Photos  User Manual  Internal Photographs  External Photographs  Test Setup photo---DTS  Test Setup Photo---DSS  Test Setup Photos---PCE  Test Setup Photos---DXX  Test Setup Photos---SAR  User Manual  Internal Photographs  External Photographs Sincerely, Signature: Name: Junfeizhao Date:2020/01/20

FCC Software Configuration Control Declaration Rev1.1 SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD FCC Software Configuration Control Declaration Date: January 26, 2021 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Smart Phone / WP10 FCC ID: 2ANMU-WP10 Regarding FCC Country Code Selection guidelines identified in KDB 594280D01v02r01. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Junfeizhao Title: Manager Signatureof applicant

(SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD) Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2021/01/20 SUBJECT: FCC Application for FCC ID: 2ANMU-WP10 To Whom It May Concern: We, the undersigned, hereby authorize Alex Li Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park Sanwei Community, Xixiang Street, Baoan District Shenzhen China Tel: +86-755-6115-9384 Email: [email protected] on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by NTEK Testing Technology Co., Ltd. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Signatory 2021/01/20 Junfeizhao SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address: A-SIDE A2 BUILDING 2/F ENET NEW INDUSTRIAL PARK, NO.20 DAFU INDUSTRIAL ZONE, AOBEI COMMUNITY, GUANLAN, LONGHUA NEW DISTRICT,SHENZHEN CHINA

S20121001303 Model Name: WP10 ATTACHMENT PHOTOGRAPHS OF EUT Photo1 Photo2 S20121001303 Model Name: WP10 Photo3 Photo4 S20121001303 Model Name: WP10 Photo5 Photo6 S20121001303 Model Name: WP10 Photo7 Photo8 S20121001303 Model Name: WP10 Photo9 Photo10

Label and its Location Laser engraving

S20121001303 Model Name: WP10 Photo11 Photo12 S20121001303 Model Name: WP10 Photo13 Photo14 S20121001303 Model Name: WP10 Photo15 Photo16 S20121001303 Model Name: WP10 Photo17 Photo18 S20121001303 Model Name: WP10 Photo19 Photo20 S20121001303 Model Name: WP10 Photo21 Photo22 S20121001303 Model Name: WP10 Photo23 Photo24 S20121001303 Model Name: WP10 Photo25 Photo26 S20121001303 Model Name: WP10 Photo27 Photo28 S20121001303 Model Name: WP10 Photo 29

Page 1 of 290 Report No.: S20121001302001 FCC SAR EVALUATION REPORT In accordance with the requirements of FCC 47 CFR Part 2(2.1093), ANSI/IEEE C95.1-1992 and IEEE Std 1528-2013 Product Name： Smart Phone Trademark： OUKITEL Model Name： WP10 Family Model： N/A Report No.： S20121001302001 FCC ID： 2ANMU-WP10 Prepared for SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD A-SIDE A2 BUILDING 2/F ENET NEW INDUSTRIAL PARK,NO.20 DAFU INDUSTRIAL ZONE, AOBEI COMMUNITY, GUANLAN, LONGHUA NEW DISTRICT, SHENZHEN CHINA Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao'an District, Shenzhen 518126 P.R.China. Tel.: 400-800-6106, 0755-3699 5508 Website: http://www.ntek.org.cn Page 2 of 290 Report No.: S20121001302001 TEST RESULT CERTIFICATION Applicant’s name .................. : SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address .................................. : A-SIDE A2 BUILDING 2/F ENET NEW INDUSTRIAL PARK,NO.20 DAFU INDUSTRIAL ZONE, AOBEI COMMUNITY, GUANLAN, LONGHUA NEW DISTRICT,SHENZHEN CHINA Manufacturer's Name ........... : SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Address .................................. : A-SIDE A2 BUILDING 2/F ENET NEW INDUSTRIAL PARK,NO.20 DAFU INDUSTRIAL ZONE, AOBEI COMMUNITY, GUANLAN, LONGHUA NEW DISTRICT,SHENZHEN CHINA Product description Product name ......................... : Smart Phone Trademark ............................ : OUKITEL Model Name ......................... : WP10 Family Model .......................... : N/A Standards .............................. : FCC 47 CFR Part 2(2.1093) ANSI/IEEE C95.1-1992 IEEE Std 1528-2013 Published RF exposure KDB procedures This device described above has been tested by Shenzhen NTEK. In accordance with the measurement methods and procedures specified in IEEE Std 1528-2013 and KDB 865664 D01. Testing has shown that this device is capable of compliance with localized specific absorption rate (SAR) specified in FCC 47 CFR Part 2(2.1093) and ANSI/IEEE C95.1-1992. The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK, this document may be altered or revised by Shenzhen NTEK, personal only, and shall be noted in the revision of the document. Date of Test Date (s) of performance of tests ............. : Dec. 14, 2020 ~ Dec. 22, 2020 Date of Issue .......................................... : Jan. 15, 2021 Test Result .............................................. : Pass Prepared By (Test Engineer) : (Cheng Jiawen) Approved By (Lab Manager) : (Alex Li) Page 3 of 290 Report No.: S20121001302001 ※ ※ Revision History ※ ※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release Jan. 15, 2021 Cheng Jiawen Page 4 of 290 Report No.: S20121001302001 TABLE OF CONTENTS 1. General Information ............................................................................................ 6 1.1. RF exposure limits .................................................................................... 6 1.2. Statement of Compliance ........................................................................ 7 1.3. EUT Description ....................................................................................... 7 1.4. Test specification(s) .................................................................................. 9 1.5. Ambient Condition ................................................................................... 9 2. SAR Measurement System ................................................................................. 10 2.1. SATIMO SAR Measurement Set-up Diagram .......................................... 10 2.2. Robot ..................................................................................................... 11 2.3. E-Field Probe .......................................................................................... 12 2.3.1. E-Field Probe Calibration ................................................................. 12 2.4. SAM phantoms ...................................................................................... 13 2.4.1. Technical Data .................................................................................. 14 2.5. Device Holder ........................................................................................ 15 2.6. Test Equipment List ................................................................................ 16 3. SAR Measurement Procedures .......................................................................... 18 3.1. Power Reference ................................................................................... 18 3.2. Area scan & Zoom scan .......................................................................... 18 3.3. Description of interpolation/extrapolation scheme .............................. 20 3.4. Volumetric Scan ..................................................................................... 20 3.5. Power Drift ............................................................................................ 20 4. System Verification Procedure .......................................................................... 21 4.1. Tissue Verification ................................................................................. 21 4.1.1. Tissue Dielectric Parameter Check Results ...................................... 22 4.2. System Verification Procedure .............................................................. 23 4.2.1. System Verification Results .............................................................. 24 5. SAR Measurement variability and uncertainty .................................................. 25 5.1. SAR measurement variability ....................................................…

Text truncated - open the document above for the full version.

Page 181 of 290 Report No.: S20121001302001 14. Appendix D. Calibration Certificate Table of contents E Field Probe - SN 41/18 EPGO330 750 MHz Dipole - SN 03/15 DIP 0G750-355 835 MHz Dipole - SN 03/15 DIP 0G835-347 1800 MHz Dipole - SN 03/15 DIP 1G800-349 1900 MHz Dipole - SN 03/15 DIP 1G900-350 2450 MHz Dipole - SN 03/15 DIP 2G450-352 2600 MHz Dipole - SN 03/15 DIP 2G600-356 5000-6000 MHz Dipole - SN 13/14 WGA 33 Extended Calibration Certificate Page 182 of 290 Report No.: S20121001302001 Page 183 of 290 Report No.: S20121001302001 Page 184 of 290 Report No.: S20121001302001 Page 185 of 290 Report No.: S20121001302001 Page 186 of 290 Report No.: S20121001302001 Page 187 of 290 Report No.: S20121001302001 Page 188 of 290 Report No.: S20121001302001 Page 189 of 290 Report No.: S20121001302001 Page 190 of 290 Report No.: S20121001302001 Page 191 of 290 Report No.: S20121001302001 Page 192 of 290 Report No.: S20121001302001 Page 193 of 290 Report No.: S20121001302001 Page 194 of 290 Report No.: S20121001302001 Page 195 of 290 Report No.: S20121001302001 Page 196 of 290 Report No.: S20121001302001 Page 197 of 290 Report No.: S20121001302001 Page 198 of 290 Report No.: S20121001302001 Page 199 of 290 Report No.: S20121001302001 Page 200 of 290 Report No.: S20121001302001 Page 201 of 290 Report No.: S20121001302001 Page 202 of 290 Report No.: S20121001302001 Page 203 of 290 Report No.: S20121001302001 Page 204 of 290 Report No.: S20121001302001 Page 205 of 290 Report No.: S20121001302001 Page 206 of 290 Report No.: S20121001302001 Page 207 of 290 Report No.: S20121001302001 Page 208 of 290 Report No.: S20121001302001 Page 209 of 290 Report No.: S20121001302001 Page 210 of 290 Report No.: S20121001302001 Page 211 of 290 Report No.: S20121001302001 Page 212 of 290 Report No.: S20121001302001 Page 213 of 290 Report No.: S20121001302001 Page 214 of 290 Report No.: S20121001302001 Page 215 of 290 Report No.: S20121001302001 Page 216 of 290 Report No.: S20121001302001 Page 217 of 290 Report No.: S20121001302001 Page 218 of 290 Report No.: S20121001302001 Page 219 of 290 Report No.: S20121001302001 Page 220 of 290 Report No.: S20121001302001 Page 221 of 290 Report No.: S20121001302001 Page 222 of 290 Report No.: S20121001302001 Page 223 of 290 Report No.: S20121001302001 Page 224 of 290 Report No.: S20121001302001 Page 225 of 290 Report No.: S20121001302001 Page 226 of 290 Report No.: S20121001302001 Page 227 of 290 Report No.: S20121001302001 Page 228 of 290 Report No.: S20121001302001 Page 229 of 290 Report No.: S20121001302001 Page 230 of 290 Report No.: S20121001302001

Page 231 of 290 Report No.: S20121001302001 Page 232 of 290 Report No.: S20121001302001 Page 233 of 290 Report No.: S20121001302001 Page 234 of 290 Report No.: S20121001302001 Page 235 of 290 Report No.: S20121001302001 Page 236 of 290 Report No.: S20121001302001 Page 237 of 290 Report No.: S20121001302001 Page 238 of 290 Report No.: S20121001302001 Page 239 of 290 Report No.: S20121001302001 Page 240 of 290 Report No.: S20121001302001 Page 241 of 290 Report No.: S20121001302001 Page 242 of 290 Report No.: S20121001302001 Page 243 of 290 Report No.: S20121001302001 Page 244 of 290 Report No.: S20121001302001 Page 245 of 290 Report No.: S20121001302001 Page 246 of 290 Report No.: S20121001302001 Page 247 of 290 Report No.: S20121001302001 Page 248 of 290 Report No.: S20121001302001 Page 249 of 290 Report No.: S20121001302001 Page 250 of 290 Report No.: S20121001302001 Page 251 of 290 Report No.: S20121001302001 Page 252 of 290 Report No.: S20121001302001 Page 253 of 290 Report No.: S20121001302001 Page 254 of 290 Report No.: S20121001302001 Page 255 of 290 Report No.: S20121001302001 Page 256 of 290 Report No.: S20121001302001 Page 257 of 290 Report No.: S20121001302001 Page 258 of 290 Report No.: S20121001302001 Page 259 of 290 Report No.: S20121001302001 Page 260 of 290 Report No.: S20121001302001 Page 261 of 290 Report No.: S20121001302001 Page 262 of 290 Report No.: S20121001302001 Page 263 of 290 Report No.: S20121001302001 Page 264 of 290 Report No.: S20121001302001 Page 265 of 290 Report No.: S20121001302001 Page 266 of 290 Report No.: S20121001302001 Page 267 of 290 Report No.: S20121001302001 Page 268 of 290 Report No.: S20121001302001 Page 269 of 290 Report No.: S20121001302001 Page 270 of 290 Report No.: S20121001302001 Page 271 of 290 Report No.: S20121001302001 <Justification of the extended calibration> If dipoles are verified in return loss (<-20dB, within 20% of prior calibration for below 3GHz, and <-8dB, within 20% of prior calibration for 5GHz to 6GHz), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Head 750MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -35.83 - 51.3 - Apr. 19, 2018 -35.948 0.329 51.314 0.014 Apr. 18, 2019 -35.975 0.405 51.341 0.041 Apr. 17, 2020 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 272 of 290 Report No.: S20121001302001 <Body 750MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -32.65 - 50.8 - Apr. 19, 2018 -32.051 1.835 51.838 1.038 Apr. 18, 2019 -32.075 1.761 51.817 1.017 Apr. 17, 2020 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 273 of 290 Report No.: S20121001302001 <Head 835MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -23.67 - 56.8 - Apr. 19, 2018 -23.947 1.17 56.615 0.185 Apr. 18, 2019 -23.920 1.056 56.632 0.168 Apr. 17, 2020 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 274 of 290 Report No.: S20121001302001 <Body 835MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -27.64 - 53.5 - Apr. 19, 2018 -27.789 0.54 53.734 0.234 Apr. 18, 2019 -27.735 0.344 53.747 0.247 Apr. 17, 2020 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 275 of 290 Report No.: S20121001302001 <Head 1800MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -26.62 - 47.3 - Apr. 19, 2018 -25.8 3.080 45.156 2.144 Apr. 18, 2019 -25.880 2.780 45.246 2.054 Apr. 17, 2020 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 276 of 290 Report No.: S20121001302001 <Body 1800MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -27.86 - 46.2 - Apr. 19, 2018 -27.017 3.026 44.51 1.69 Apr. 18, 2019 -27.027 2.990 44.32 1.88 Apr. 17, 2020 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 277 of 290 Report No.: S20121001302001 <Head 1900MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -25.15 - 52.6 - Apr. 19, 2018 -23.144 7.976 53.604 1.004 Apr. 18, 2019 -23.923 4.879 53.344 0.744 Apr. 17, 2020 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 278 of 290 Report No.: S20121001302001 <Body 1900MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -22.99 - 47.6 - Apr. 19, 2018 -22.679 1.353 49.311 1.711 Apr. 18, 2019 -22.690 1.305 49.385 1.785 Apr. 17, 2020 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 279 of 290 Report No.: S20121001302001 <Head 2450MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -28.15 - 53.9 - Apr. 19, 2018 -26.296 6.586 54.99 1.09 Apr. 18, 2019 -26.456 6.018 54.65 0.75 Apr. 17, 2020 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior …

Text truncated - open the document above for the full version.

Page 221 of 289 Report No.: S20121001302001 Page 222 of 289 Report No.: S20121001302001 Page 223 of 289 Report No.: S20121001302001 Page 224 of 289 Report No.: S20121001302001 Page 225 of 289 Report No.: S20121001302001 Page 226 of 289 Report No.: S20121001302001 Page 227 of 289 Report No.: S20121001302001 Page 228 of 289 Report No.: S20121001302001 Page 229 of 289 Report No.: S20121001302001 Page 230 of 289 Report No.: S20121001302001 Page 231 of 289 Report No.: S20121001302001 Page 232 of 289 Report No.: S20121001302001 Page 233 of 289 Report No.: S20121001302001 Page 234 of 289 Report No.: S20121001302001 Page 235 of 289 Report No.: S20121001302001 Page 236 of 289 Report No.: S20121001302001 Page 237 of 289 Report No.: S20121001302001 Page 238 of 289 Report No.: S20121001302001 Page 239 of 289 Report No.: S20121001302001 Page 240 of 289 Report No.: S20121001302001 Page 241 of 289 Report No.: S20121001302001 Page 242 of 289 Report No.: S20121001302001 Page 243 of 289 Report No.: S20121001302001 Page 244 of 289 Report No.: S20121001302001 Page 245 of 289 Report No.: S20121001302001

Page 246 of 289 Report No.: S20121001302001 Page 247 of 289 Report No.: S20121001302001 Page 248 of 289 Report No.: S20121001302001 Page 249 of 289 Report No.: S20121001302001 Page 250 of 289 Report No.: S20121001302001 Page 251 of 289 Report No.: S20121001302001 Page 252 of 289 Report No.: S20121001302001 Page 253 of 289 Report No.: S20121001302001 Page 254 of 289 Report No.: S20121001302001 Page 255 of 289 Report No.: S20121001302001 Page 256 of 289 Report No.: S20121001302001 Page 257 of 289 Report No.: S20121001302001 Page 258 of 289 Report No.: S20121001302001 Page 259 of 289 Report No.: S20121001302001 Page 260 of 289 Report No.: S20121001302001 Page 261 of 289 Report No.: S20121001302001 Page 262 of 289 Report No.: S20121001302001 Page 263 of 289 Report No.: S20121001302001 Page 264 of 289 Report No.: S20121001302001 Page 265 of 289 Report No.: S20121001302001

Page 266 of 289 Report No.: S20121001302001 Page 267 of 289 Report No.: S20121001302001 Page 268 of 289 Report No.: S20121001302001 Page 269 of 289 Report No.: S20121001302001 Page 270 of 289 Report No.: S20121001302001 <Justification of the extended calibration> If dipoles are verified in return loss (<-20dB, within 20% of prior calibration for below 3GHz, and <-8dB, within 20% of prior calibration for 5GHz to 6GHz), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Head 750MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -35.83 - 51.3 - Apr. 19, 2018 -35.948 0.329 51.314 0.014 Apr. 18, 2019 -35.975 0.405 51.341 0.041 Apr. 17, 2020 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 271 of 289 Report No.: S20121001302001 <Body 750MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -32.65 - 50.8 - Apr. 19, 2018 -32.051 1.835 51.838 1.038 Apr. 18, 2019 -32.075 1.761 51.817 1.017 Apr. 17, 2020 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 272 of 289 Report No.: S20121001302001 <Head 835MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -23.67 - …

Text truncated - open the document above for the full version.