2AO94-W6RBluetooth Beacon

W6 is a Bluetooth wristband beacon designed to offer personnel monitoring, access control and indoor location-based services. Equipped with replaceable battery, the device will last up to 4 years due to the ultra-low power consumption. When facing emergencies, users could press the button to trigger SOS help. Available now in both soft rubber button and regular button options. Application Wristband Beacon W6 Series Stay Connected Keep Safety Shopping MallHealthcare General Specs Connectivity: Transmission Range: Dimension(main body): Color: Material: IP rating: Installation: Button: LED: Sensor: Battery lifespan: RFID/NFC: BLE 5.0 Up to 150 meters (without any obstacles) 38.6mm*38.6mm*10.5mm (W6) 38.6mm*38.6mm*10.8mm (W6B) W6: Black W6B: Black (body), Red (button) ABS+PC & TPU IP67 Wristband | Keychain Mechanical button Red 3-axis accelerometer sensor 1.5 years* Supported Battery capacity: Operating temperature: Certification: CR2032 220mAh | Replaceable battery -20°C/60°C FCC | CE | REACH |WEEE 38.6 mm 10.8 mm 38.6 mm 10.5 mm *Lifespan estimated based on standard scenario under 25°C conditions. (0dBm Tx Power | 1000ms ADV interval) Multiple Wearing Methods Multiple wearing methodsIP67 WaterproofReplaceable battery Wristband KeychainNeck chain W6B (soft rubber button)W6 (regular button) FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: Companyname:HOPEKCORPORATIONINC FRN:0034562900 ContactName:YangyangXu Address:16755CoyoteBushDrUnit84,SanDiego,CA92127UnitedStates TelephoneNo:561-875-9826 Email:[email protected] Applicant: Companyname:MOKOTECHNOLOGYLIMITED GranteeCode:2AO94 FCCID:2AO94-W6R FRN:0027351667 ContactName:JinghuiChen Address:Factory201,107PinshunRdGuixiangcommunity,GuanlanStreet, Longhua,Shenzhen,GuangdongProvince,China518110 TelephoneNo:86-755-23956710 FaxNo:+86-755-23956710 Email:[email protected] MOKOTECHNOLOGYLIMITEDcertifiesthat,asofthedateofthisfilingoftheapplicationwith theTCB,[HOPEKCORPORATIONINC]isourdesignatedUSagentforserviceofprocessfor theabovereferencedFCCID.MOKOTECHNOLOGYLIMITEDacceptstomaintainanagent fornolessthanoneyearafterthegranteehasterminatedallmarketingandimportationorthe conclusionofanycommissionrelatedproceedinginvolvingequipment.[HOPEK CORPORATIONINC]accepts,asofthedateofthefilingoftheapplication,theobligationofthe designatedUSagentforserviceofprocessfortheabovereferenceFCCID. TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,and clause§2.911. TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. Date:2026-04-29 Applicant’sName:JinghuiChenUSAgent’sName:YangyangXu Title:SEOTitle:Manager Signature:Signature:

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 MOKO TECHNOLOGY LIMITED TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: MOKO TECHNOLOGY LIMITED Grantee code: 2AO94 FCC ID: 2AO94-W6R FRN: 0027351667 Contact Name: Jinghui Chen Address: Factory 201, 107 Pinshun Rd Guixiang community, Guanlan Street, Longhua, Shenzhen, Guangdong Province, China 518110 Telephone No: 86-755-23956710 Fax No: +86-755-23956710 Email: [email protected] i. [MOKO TECHNOLOGY LIMITED] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [MOKO TECHNOLOGY LIMITED] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [MOKO TECHNOLOGY LIMITED] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: 2026/4/29 Applicant’s Name: Jinghui Chen Title: SEO Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

MOKO TECHNOLOGY LIMITED Code 00018768 Ed. 1 Device Bluetooth Beacon Company name MOKO TECHNOLOGY LIMITED Grantee code 2AO94 FCC ID 2AO94-W6R FRN 0027351667 Contact name Jinghui Chen Address Factory 201, 107 Pinshun Rd Guixiang community, Guanlan Street, Longhua, Shenzhen, Guangdong Province, China 518110 Telephone number +86-755-23956710 E-mail [email protected] Chipset/module information nRF52810 Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A 3 # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; N/A 4 ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Jinghui Chen Date: 2026/4/29 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

MOKO TECHNOLOGY LIMITED Difference Description WeMOKO TECHNOLOGY LIMITEDstate: Product name:Bluetooth Beacon Model(s):W6R, W6BR FCC ID: 2AO94-W6R All the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the difference lies in the except appearance button color and model name. Signature: April 29, 2026 Name: Jinghui Chen Position: SEO Company Name: MOKO TECHNOLOGY LIMITED Address: Factory 201, 107 Pinshun Rd Guixiang community, Guanlan Street, Longhua, Shenzhen, Guangdong Province, China 518110 Tel: 86-755-23956710 Fax: +86-755-23956710 Email: [email protected]

TCBCALLpágina1 FileFCCID:2AO94-W6R PleaseuploadanexhibitthatexplainshowdoestheTCBverifythenewagentinformation: 1-IstheaddressoftheagentavalidphysicalUSmailingaddress(notaUSpostofficebox,notavirtualmailbox,notP.O.Boxes,notavacantlot,notapublicbuilding, etc.) ○Wehavecheckediftheaddressexistsinarealandpotentialbuilding(Googlemaps)+officialUSregister,afterthisverificationandtheevidencebelowwecan guaranteethefollowing: notaUSpostofficebox notavirtualmailbox notP.O.Boxes notavacantlot notapublicbuilding(note) ►WecheckedtheFCCFRNSearchbasedontheinformationprovidedbythegrantee. Ontheofficialregisterfrom:https://www.coloradosos.gov/biz/BusinessEntityCriteriaExt.do TCBCALLpágina2 TCBCALLpágina3 TCBCALLpágina4 TCBCALLpágina5 TCBCALLpágina6 TCBCALLpágina7 ►CONCLUSIONbyTCB:TheASOPdefinedandprovidedbygranteeisVALIDandconfirmed.Thereforetheexhibit"2604292AO94-W6RUS_Agent_Letter- 2AO94-W6R(psi2604109-C01-M07)"includedinthefileisok. 2-IstheagentphysicallylocatedatthatvalidUSaddresssuchthattheagentcanbelegallyservedatthataddress? Yes,checkabove 3-Hasthelistedagentclearlyagreedinwritingtoserveastheagentforthegranteeatthataddress? Yes,itisincludedintheexhibit"2604292AO94-W6RUS_Agent_Letter-2AO94-W6R(psi2604109-C01-M07)" >

C5266091_X10_Ed.2 1/1 MOKO TECHNOLOGY LIMITED Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: April 29, 2026 Subject: Request for Confidentiality FCC ID: 2AO94-W6R To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, C5266091_X10_Ed.2 1/1 Signature: April 29, 2026 Name Jinghui Chen Position SEO Company Name MOKO TECHNOLOGY LIMITED Address Factory 201, 107 Pinshun Rd Guixiang community, Guanlan Street, Longhua, Shenzhen, Guangdong Province, China 518110 Tel 86-755-23956710 Fax +86-755-23956710 Email [email protected]

C5266091_X8_Ed.1 1/1 Letter of Authorization MOKO TECHNOLOGY LIMITED Company: MOKO TECHNOLOGY LIMITED Address: Factory 201, 107 Pinshun Rd Guixiang community, Guanlan Street, Longhua, Shenzhen, Guangdong Province, China 518110 Product Name: Bluetooth Beacon Model Number: W6R, W6BR FCC Identifier: 2AO94-W6R We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Jinghui Chen Date: 2026-04-29 Title: SEO Signature of applicant:

Page 1 of 7 Report No.: psi2604109-C01-R01 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Appendix II external photos FCC ID: 2AO94-W6R W6R Page 2 of 7 Report No.: psi2604109-C01-R01 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China W6BR Page 3 of 7 Report No.: psi2604109-C01-R01 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Page 4 of 7 Report No.: psi2604109-C01-R01 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Page 5 of 7 Report No.: psi2604109-C01-R01 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Page 6 of 7 Report No.: psi2604109-C01-R01 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Page 7 of 7 Report No.: psi2604109-C01-R01 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China ------End------

Label and Location Material: Silk-screen Font color: White Size: L: 2cm*W: 1cm Label and Location W L

Page 1 of 4 Report No.: psi2604109-C01-R01 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Appendix III internal photos FCC ID: 2AO94-W6R Page 2 of 4 Report No.: psi2604109-C01-R01 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Page 3 of 4 Report No.: psi2604109-C01-R01 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Page 4 of 4 Report No.: psi2604109-C01-R01 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China ------End------ ANT BT

Page 1 of 1 Report No.: psi2604109-C01-R01 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Appendix IV RF Exposure evaluation FCC ID: 2AO94-W6R According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison. BLE: Worse case output power is as below: [2480MHz: 1.30dBm] Maximum output power is 1.30dBm (1.35 mW). (1.35mW /5mm)·[√2.480(GHz)]= 0.42<3.0 for 1-g SAR. Then SAR evaluation is not required. § 2.1093 Radiofrequency radiation exposure evaluation: portable devices. This device is designed to comply with FCC RF exposure standards, with a testing distan ce of 5mm. It is recommended to avoid direct contact with the body during use and ensur e a minimum distance of ≥ 5mm.

Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Page 1 of 44 Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China FCC TEST REPORT FCC ID: 2AO94-W6R On Behalf of MOKO TECHNOLOGY LIMITED Bluetooth Beacon Model No.: W6R, W6BR Prepared for : MOKO TECHNOLOGY LIMITED Address : Factory 201, 107 Pinshun Rd Guixiang community, Guanlan Street, Longhua, Shenzhen, Guangdong Province, China 518110 Prepared By : Shenzhen PSI Testing Co., Ltd. Address : 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Report Number : psi2604109-C01-R01 Date of Receipt : April 13, 2026 Date of Test : April 13, 2026–April 22, 2026 Date of Report : April 22, 2026 Version Number : V0 Page 2 of 44 Report No.: psi2604109-C01-R01 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China TABLE OF CONTENTS Description Pag e 1. Summary Of Standards And Results ------------------------------------------------------------------------- 6 1.1. Description of Standards and Results ------------------------------------------------------------------ 6 2. General Information ------------------------------------------------------------------------------------------------ 7 2.1. Description of Device (EUT) ------------------------------------------------------------------------------ 7 2.2. Accessories of Device (EUT) ----------------------------------------------------------------------------- 8 2.3. Tested Supporting System Details ---------------------------------------------------------------------- 8 2.4. Block Diagram of Connection Between EUT and Simulators ------------------------------------ 8 2.5. Test Mode Description -------------------------------------------------------------------------------------- 9 2.6. Software test version and power setting information ----------------------------------------------- 9 2.7. Test Conditions ---------------------------------------------------------------------------------------------- 10 2.8. Test Facility --------------------------------------------------------------------------------------------------- 10 2.9. Measurement Uncertainty -------------------------------------------------------------------------------- 10 2.10. Test Equipment List ---------------------------------------------------------------------------------------- 11 3. Spurious Emission ------------------------------------------------------------------------------------------------ 12 3.1. Test Limits ---------------------------------------------------------------------------------------------------- 12 3.2. Block Diagram of Test setup ----------------------------------------------------------------------------- 13 3.3. Test Procedure ---------------------------------------------------------------------------------------------- 14 3.4. Test Results -------------------------------------------------------------------------------------------------- 15 4. Power Line Conducted Emission ----------------------------------------------------------------------------- 20 4.1. Test Limits ---------------------------------------------------------------------------------------------------- 20 4.2. Test Procedure ---------------------------------------------------------------------------------------------- 20 4.3. Test Setup ---------------------------------------------------------------------------------------------------- 20 4.4. Test Results -------------------------------------------------------------------------------------------------- 21 5. Out-of-band Emissions ------------------------------------------------------------------------------------------ 22 5.1. Test Limits ---------------------------------------------------------------------------------------------------- 22 5.2. Test Procedure ---------------------------------------------------------------------------------------------- 22 5.3. Test Setup ---------------------------------------------------------------------------------------------------- 22 5.4. Test Results -------------------------------------------------------------------------------------------------- 22 6. Conducted Maximum Output Power ------------------------------------------------------------------------ 28 6.1. Test limits ----------------------------------------------------------------------------------------------------- 28 6.2. Test Procedure ---------------------------------------------------------------------------------------------- 28 6.3. Test Setup ---------------------------------------------------------------------------------------------------- 28 6.4. Test Results -------------------------------------------------------------------------------------------------- 28 7. Peak Power Spectral Density ---------------------------------------------------------------------------------- 33 7.1. Test limits ----------------------------------------------------------------------------------------------------- 33 7.2. Test Procedure ---------------------------------------------------------------------------------------------- 33 7.3. Test Setup ---------------------------------------------------------------------------------------------------- 33 7.4. Test Results -------------------------------------------------------------------------------------------------- 33 8. Occupied Bandwidth ---------------------------------------------------------------------------------------------- 36 8.1. Test limits ----------------------------------------------------------------------------------------------------- 36 8.2. Test Procedure ----------------------------------------------------------------------------------…

Text truncated - open the document above for the full version.

深圳市安特通讯科技有限公司 W6P TECHNOLOGY LTD Antenna Test Repor ManufacturerANT Communication Technology（Shenzhen） Co., LTD. address701, Building A, No. 10, Jiangfu Road, Xinzhuang Community, Matian Street, Guangming District, Shenzhen t Tester : Hu Lin Date : 2025 / 12/ 11 深圳市安特通讯科技有限公司 ANT Communication Technology（Shenzhen） Co., LTD. 1. Device Profile 2. BT Test 深圳市安特通讯科技有限公司 ANT Communication Technology（Shenzhen） Co., LTD. 1. Device Profile X Z Y BT Antenna 深圳市安特通讯科技有限公司 ANT Communication Technology（Shenzhen） Co., LTD. Agilent E5071CS-Parameter Test 2. BT Test 深圳市安特通讯科技有限公司 ANT Communication Technology（Shenzhen） Co., LTD. Antenna Passive Test X Y Z X Y Z 深圳市安特通讯科技有限公司 ANT Communication Technology（Shenzhen） Co., LTD. Passive Test Frequency/Mh z Efficiency/d B Efficiency/%MaxGain/dBi 2400-5.7426.67-1.25 2410-5.5327.99-0.63 2420-5.3629.11-0.68 2430-5.230.2-0.14 2440-4.932.360.37 2450-4.6334.430.41 2460-4.7733.340.46 2470-4.9232.21-0.09 2480-5.0930.970.18 2490-5.1330.690.42 2500-5.2429.92-0.56 深圳市安特通讯科技有限公司 ANT Communication Technology（Shenzhen） Co., LTD. 2D-Etotal (2400/2450/2500Mhz) Phi 0 2DPhi 90 2DTheta 90 2D 深圳市安特通讯科技有限公司 ANT Communication Technology（Shenzhen） Co., LTD. THANK YOU!

Page 1 of 1 Report No.: psi2604109-C01-R01 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Appendix I Test Setup Photo FCC ID: 2AO94-W6R Spurious Radiation Emissions Test (<1G) Spurious Radiation Emissions Test (＞1G) ------End------