2AO9X-T51313.3 TABLET

iDISPLAY 13.3” Display User Manual 1 About This Guide ...............................................................................2 Introducing the iDISPLAY 13.3” GEN 5 .............................................2 Important Notices .............................................................................3 Copyright Information......................................................................3 Package Contents ..............................................................................4 Quick Start User Guide ......................................................................6 Setting up the Tablet Hardware .......................................................6 Playing Videos and Displaying Images .............................................6 Supported File Formats ....................................................................7 Accessing the Pulse Player Settings ................................................7 Pulse Player Settings .........................................................................8 Using the Android Operating System ...............................................12 Configuring the Android Operating System Settings .....................13 Using Pulse Management ................................................................14 Troubleshooting ................................................................................15 Table of Contents 2 About This Guide Thank you for purchasing an Outform product. We recommend reading this user guide in its entirety in order to maximize the performance and service life of this product. This product is intended for commercial use and should be installed by authorized personnel only. Introducing the iDISPLAY 13.3” GEN 5 The iDISPLAY 13.3” GEN 5 is interactive digital display designed to be used in commercial environments, and includes the following features: • Quad core processor • 1920 x 1080 full HD resolution • Android 8.1/9.0 operating system • 10-point touch capacitive screen • 802.11b/g/n WiFi • Bluetooth • VESA wall mounting option • 10M/100M RJ45 Ethernet port with Power over Ethernet (with PoE 13.3) • USB ports • 2 speakers • Headphone jack If required, please ask for detailed specifications. 3 Important Notices Copyright Information Copyright © 2021 Outform. All rights reserved. All intellectual property rights in this publication are owned by Outform and protected by applicable copyright laws and international treaty provisions. Outform retains all rights not expressly granted. No part of this publication may be reproduced in any form whatsoever or used to make any derivative work without prior written approval by Outform. Outform reserves the right to revise this publication, and/or make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time without prior notice. The information in this document is provided in good faith, but without any representation or warranty whatsoever, whether it is accurate, or complete or otherwise, and on express understanding that Outform shall have no liability whatsoever to other parties in any way arising from or relating to the information or its use. All other trademarks are the property of their respective owners. Other company and brand products and service names are trademarks or registered trademarks of their respective holders. This device complies with FCC regulations. 4 Package Contents The package contains the following items: 13.3“ Shown Display Tablet Power AdapterPower Cable (US) 5 13.3” Display Exterior Components 1537 2 9 46 8 10 Top View Bottom View No.Description 1USB 2.0 OTG Port 2Ethernet RJ45 Port 3USB 2.0 OTG Port 4SD Card Slot 53.5 mm Audio Port 6USB 2.0 OTG Port 7USB OTG 8DC 12V Port 5.5x2.1 mm 9Power Button/Back Button 10Vesa Hole 6x4xM4 6 This section describes how to set up and use the iDISPLAY tablet for the first time. The tablet runs OUTFORM’s Pulse Player software by default, which runs on an Android operating system installed in the player to play the desired content. Setting up the Tablet Hardware Connect the following components to the back side ports of the iDISPLAY tablet: • The power adapter, plugged in to a nearby plug outlet. • Alternately, power may be supplied through the RJ45 outlet by plugging in an RJ45 cable connected to a POE capable source. The tablet automatically powers on and initiates the Pulse Player software, which in most cases plays a sample video by default. Playing Videos and Displaying Images Copy video and image files to the tablet using a USB thumb drive as follows: 1. Insert an empty USB drive into a computer and create a folder titled “0” (the number zero) at the topmost (root) directory of the drive. Ensure that no other content is on the drive. 2. Copy the desired video and image files to be played into the “0” folder. 3. Eject the drive from the computer and insert it into a USB port on the back side of the tablet. 4. A password prompt appears on the display. Enter the configured password using the on-screen keyboard. By default this password is “11223344” without the quotation marks, and can be modified later. 5. Upon successful entry of the password, select one of the two options that display, either to delete and replace the existing content on the tablet or to simply add additional content. NOTE: If you choose to keep the existing content, the new content from the USB drive is copied alongside the existing content, and no files are deleted. However, if a file on the drive has the same name as a file already on the tablet, the file on the tablet will be overwritten. 6. After a message displays indicating that the content has been copied, the USB drive can be removed. The new content plays automatically. NOTE: When auto-copying files from a Linux or MAC OS-based computer, hidden metadata files, preceded by a period “.”, may also get copied into the “0” folder on the USB drive. When Pulse Player attempts to play or display these files, a bla…

Text truncated - open the document above for the full version.

Outform Science & Technology (Shenzhen) Co., Ltd. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Outform Science & Technology (Shenzhen) Co., Ltd. Address: Unit 3, 1st Floor, Huada Building, Gongye 3rd Road Yanshan Community, Zhaoshang Subdistrict, Nanshan District, Shenzhen, 518067, China Product Name: 13.3” TABLET FCC ID: 2AO9X-T513 Model(s): UIT513A-B01, UIT513X-XYY (The 1st X is “A” or “B” represents the agent or the client; The 2th X is A-Z represents the color; YY is client number from “01” to “90”) 2.911(d)(5)(i) Equipment Type We, [Outform Science & Technology (Shenzhen) Co., Ltd. ] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Ronen Simhi Date: 2023-09-13 Title and Company name: General Manager NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Outform Science & Technology (Shenzhen) Co., Ltd. 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Outform Science & Technology (Shenzhen) Co., Ltd. Address: Unit 3, 1st Floor, Huada Building, Gongye 3rd Road Yanshan Community, Zhaoshang Subdistrict, Nanshan District, Shenzhen, 518067, China Product Name: 13.3” TABLET FCC ID: 2AO9X-T513 Model(s): UIT513A-B01, UIT513X-XYY (The 1st X is “A” or “B” represents the agent or the client; The 2th X is A-Z represents the color; YY is client number from “01” to “90”) 2.911(d)(5)(ii) Applicant filing We, [Outform Science & Technology (Shenzhen) Co., Ltd. ] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Ronen Simhi Date: 2023-09-13 Title and Company name: General Manager NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Outform Science & Technology (Shenzhen) Co., Ltd. 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: Outform Science & Technology (Shenzhen) Co., Ltd. Address: Unit 3, 1st Floor, Huada Building, Gongye 3rd Road Yanshan Community, Zhaoshang Subdistrict, Nanshan District, Shenzhen, 518067, China Product Name: 13.3” TABLET FCC ID: 2AO9X-T513 Model(s): UIT513A-B01, UIT513X-XYY (The 1st X is “A” or “B” represents the agent or the client; The 2th X is A-Z represents the color; YY is client number from “01” to “90”) 2.911(d)(7) USA Designated Agent for Service of Process We, [Outform Science & Technology (Shenzhen) Co., Ltd. ] (“the applicant”) designate [THREE STONES MEDIA LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: THREE STONES MEDIA LLC Address: 1200 Broadway St. APT 329, Los Angeles, CA90015 FRN: 0033401761 Contact Name: Sijie Zhang Telephone No: +1 267 909 3692 Email: [email protected] Applicant Company name: Outform Science & Technology (Shenzhen) Co., Ltd. Address: Unit 3, 1st Floor, Huada Building, Gongye 3rd Road Yanshan Community, Zhaoshang Subdistrict, Nanshan District, Shenzhen, 518067, China FCC Grantee Code: 2AO9X Contact Name: Ronen Simhi Telephone No: 0086-755-83236715 Email: [email protected] Outform Science & Technology (Shenzhen) Co., Ltd. 2.911 (d)(7)USA Agent v1.2 Signature: Title: Signature: Title: General Manager Date: 2023-09-13 Date: 2023-09-13 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threat s- to-the-communications-supply-chain-through-the

Differences Declaration To whom concern, We company Outform Science & Technology (Shenzhen) Co., Ltd. Here by declares: The product model(s) UIT513X-XYY(The 1st X is “A” or “B” represents the agent or the client; The 2th X is A-Z represents the color; YY is client number from “01” to “90”) are identical in the PCB layout, electronic schematic and antenna with UIT513A-B01, only different in model names. Sincerely yours, Name (in print): Ronen Simhi Company name: Outform Science & Technology (Shenzhen) Co., Ltd. Company address: Unit 3, 1st Floor, Huada Building, Gongye 3rd Road Yanshan Community, Zhaoshang Subdistrict, Nanshan District, Shenzhen, 518067, China Tel: 0086-755-83236715

Outform Science & Technology (Shenzhen) Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-09-13 Subject; Request for Long Term Confidentiality FCC ID: 2AO9X-T513 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Ronen Simhi Title: General Manager

Letter of Authorization Company: Outform Science & Technology (Shenzhen) Co., Ltd. Address: Unit 3, 1st Floor, Huada Building, Gongye 3rd Road Yanshan Community, Zhaoshang Subdistrict, Nanshan District, Shenzhen, 518067, China Product Name: 13.3” TABLET Model Number: UIT513A-B01, UIT513X-XYY (The 1st X is “A” or “B” represents the agent or the client; The 2th X is A-Z represents the color; YY is client number from “01” to “90”) FCC Identifier: 2AO9X-T513 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Ronen Simhi Date: 2023-09-13 Title: General Manager

Model: UIT513A-B01 External Model: UIT513A-B01 Model: UIT513A-B01 Model: UIT513A-B01 Model: UIT513A-B01

材质:消银龙 黑底白字 100番 37.4mm 37.4*19.4mm 19.4mm

Label Location

Model: UIT513A-B01 Internal Model: UIT513A-B01 Model: UIT513A-B01 Model: UIT513A-B01 Model: UIT513A-B01 Model: UIT513A-B01 Model: UIT513A-B01

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Exposure Report For Applicant Name: Outform Science & Technology (Shenzhen) Co., Ltd. Address: Unit 3, 1st Floor, Huada Building, Gongye 3rd Road Yanshan Community, Zhaoshang Subdistrict，Nanshan District, Shenzhen, 518067, China EUT Name: 13.3” TABLET Brand Name: N/A Model Number: UIT513A-B01 Series Model Number: Refer to section 2 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230831R00103 Test Standards: 47 CFR Part 2 Subpart J Section 2.1091 FCC ID: 2AO9X-T513 Test Conclusion: Pass Test Date: 2023-08-31 to 2023-09-09 Date of Issue: 2023-09-09 Prepared By: Chris Liu / Project Engineer Date: 2023-09-09 Approved By: Ryan.CJ / EMC Manager Date: 2023-09-09 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF230831R00103 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-09-09 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF230831R00103 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1. Introduction ............................................................................................................................................................................................ 4 1.1 Identification of Testing Laboratory ................................................................................................................................. 4 1.2 Identification of the Responsible Testing Location ...................................................................................................... 4 1.3 Laboratory Condition ........................................................................................................................................................... 4 1.4 Announcement ....................................................................................................................................................................... 4 2. Product Information .............................................................................................................................................................................. 5 2.1 Application Information ....................................................................................................................................................... 5 2.2 Manufacturer Information .................................................................................................................................................... 5 2.3 Factory Information .............................................................................................................................................................. 5 2.4 General Description of Equipment under Test (EUT)................................................................................................... 5 3. Test Requirement ................................................................................................................................................................................. 6 3.1 Assessment Result ............................................................................................................................................................... 6 Test Report Number: BTF230831R00103 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 4 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 1. Introduction 1.1 Identification of Testing Laboratory Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Phone Number: +86-0755-23146130 Fax Number: +86-0755-23146130 1.2 Identification of the Responsible Testing Location Test Location: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Description: All measurement facilities used to collect the measurement data are located at F101,201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China FCC Registration Number: 518915 Designation Number: CN1330 1.3 Laboratory Condition Ambient Temperature: 20°C to 25°C Ambient Relative Humidity: 45% to 55% Ambient Pressure: 100 kPa to 102 kPa 1.4 Announcement (1) The test report reference to the report template version v0. (2) The test report is invalid if not marked with the signatures of the persons responsible for prepa…

Text truncated - open the document above for the full version.

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 101 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Test Report For Applicant Name: Outform Science & Technology (Shenzhen) Co., Ltd. Address: Unit 3, 1st Floor, Huada Building, Gongye 3rd Road Yanshan Community, Zhaoshang Subdistrict，Nanshan District, Shenzhen, 518067, China EUT Name: 13.3” TABLET Brand Name: N/A Model Number: UIT513A-B01 Series Model Number: Refer to section 2 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230831R00101 Test Standards: 47 CFR Part 15.247 Test Conclusion: Pass FCC ID: 2AO9X-T513 Test Date: 2023-08-31 to 2023-09-09 Date of Issue: 2023-09-09 Prepared By: Chris Liu / Project Engineer Date: 2023-09-09 Approved By: Ryan.CJ / EMC Manager Date: 2023-09-09 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF230831R00101 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 101 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-09-09 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF230831R00101 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 101 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1 INTRODUCTION ..........................................................................................................................................5 1.1 Identification of Testing Laboratory ...............................................................................................5 1.2 Identification of the Responsible Testing Location ......................................................................5 1.3 Announcement .................................................................................................................................5 2 PRODUCT INFORMATION ..........................................................................................................................6 2.1 Application Information ...................................................................................................................6 2.2 Manufacturer Information ................................................................................................................6 2.3 Factory Information .........................................................................................................................6 2.4 General Description of Equipment under Test (EUT) ...................................................................6 2.5 Technical Information ......................................................................................................................6 3 SUMMARY OF TEST RESULTS .................................................................................................................7 3.1 Test Standards ..................................................................................................................................7 3.2 Uncertainty of Test ...........................................................................................................................7 3.3 Summary of Test Result ..................................................................................................................7 4 TEST CONFIGURATION .............................................................................................................................8 4.1 Test Equipment List .........................................................................................................................8 4.2 Test Auxiliary Equipment ............................................................................................................. 10 4.3 Test Modes ..................................................................................................................................... 10 5 EVALUATION RESULTS (EVALUATION) ................................................................................................. 11 5.1 Antenna requirement ..................................................................................................................... 11 5.1.1 Conclusion: ........................................................................................................................... 11 6 RADIO SPECTRUM MATTER TEST RESULTS (RF) .............................................................................. 12 6.1 Conducted Emission at AC power line ....................................................................................... 12 6.1.1 E.U.T. Operation: ................................................................................................................. 12 6.1.2 Test Setup Diagram: ............................................................................................................ 12 6.1.3 Test Data: ..........................................................................................................................…

Text truncated - open the document above for the full version.

Test Report Number: BTF230831R00101 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 46 of 101 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Test Report Number: BTF230831R00101 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 47 of 101 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Appendix Test Report Number: BTF230831R00101 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 48 of 101 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 1. Bandwidth 1.1 OBW 1.1.1 Test Result Mode TX Type Frequency (MHz) Packet Type ANT 99% Occupied Bandwidth (MHz) Verdict Result GFSK SISO 2402 DH5 1 1.209 Pass 2441 DH5 1 1.210 Pass 2480 DH5 1 1.210 Pass Pi/4DQPSK SISO 2402 2DH5 1 1.152 Pass 2441 2DH5 1 1.159 Pass 2480 2DH5 1 1.159 Pass 8DPSK SISO 2402 3DH5 1 1.207 Pass 2441 3DH5 1 1.209 Pass 2480 3DH5 1 1.203 Pass Test Report Number: BTF230831R00101 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 49 of 101 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 1.1.2 Test Graph GFSK_DH5_LCH_2402MHz_Ant1_NTNV GFSK_DH5_MCH_2441MHz_Ant1_NTNV Test Report Number: BTF230831R00101 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 50 of 101 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China GFSK_DH5_HCH_2480MHz_Ant1_NTNV Pi/4DQPSK_2DH5_LCH_2402MHz_Ant1_NTNV Test Report Number: BTF230831R00101 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 51 of 101 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Pi/4DQPSK_2DH5_MCH_2441MHz_Ant1_NTNV Pi/4DQPSK_2DH5_HCH_2480MHz_Ant1_NTNV Test Report Number: BTF230831R00101 Total or partial reproduction of this document without permission o…

Text truncated - open the document above for the full version.