2AOAF-230Wireless Charger

TYLT Wireless Charger USER GUIDE TYLT Wireless Charger LIGHT INDICATION Solid – Charging Blinking – Error / 04/03/20 / 2106_BOW USER GUIDE_R2 / 2 This is a wireless charger that will charge any device that supports the Qi standard, Please read the user manual before using and keep itfor future reference. Specifications: Input: 5V/2A or 9V/1.8A Wireless Charging Output: 10W (Max.) Wireless Distance: ≦6mm Efficiceny: ≧71% Dimension: 180 x 140 x 60.5 mm Weight: 70g Use procedure 1. Connect the device to the adapter with USB cable. 2. Power up the adapter. 3. We can put the mobile phone or iPad right above the device 4. The device is charging TYLT BOWL - USER GUIDE bowl Wireless Charging Pad IC3854 LIGHT INDICATION Solid – Charging Blinking – Error / 04/03/20 / 2106_BOW USER GUIDE_R2 / 2 FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any inte- rference received, including interference that may cause undesired operation. This equipm-ent has been tested and found to comply with the limits for a Class B digital dev- ice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable pro tection against harmful interference in a resi- dential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipm- ent and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/ TV tec hnician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment should be installed and operated with minimum distance 20cm between the radiator&your body. IC Statement This device complies with Industry Canada l icence-exempt RSS standard(s). Operation is subject to the following two con- ditions: (1) this device may not cause harmful interfe- rence, and (2) this device must accept anyint- erference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de broui- llage, et (2)l'utilisateur de l'appareil doit acceptertout brouillage radioélectrique subi,même si le brouillage est susceptible d'en compromettrele fonctionnement. These designs are representative of information architecture, indicating priority and layout of page components. 7KH\GRQRWFRQVWLWXWHWKHƓQDOORRN or feel of the design. PREPARED FOR T Y LT CONTACT Pawnie Farshi [email protected] 877-524-2525 Ext. 701 2106_Bow User Guide_r2 04/03/20 / © 2020 Blak Inc. / www.blakinc.com3URSULHWDU\DQG&RQƓGHQWLDO

TYLT, inc. Agent Authorization Letter 2020-07-30 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen Huaxia Testing Technology Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Name: Andre Sumian Position: Director of Product Management Company Name: TYLT, inc. Address: 685 Cochran St. Suite 200, Simi Valley, California 93065, United States Tel / Fax 8008435600 /805-915-2125 E-Mail: [email protected]

TYLT, inc. Long Term Confidentiality Request Letter 2020-07-30 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (FCC ID: 2AOAF-230) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - e.g. Block diagram - e.g. SCH - e.g. Operational Description required to be submitted with this application be permanently withheld from public review. The above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, Name: Andre Sumian Position: Director of Product Management Company Name: TYLT, inc. Address: 685 Cochran St. Suite 200, Simi Valley, California 93065, United States Tel / Fax 8008435600 /805-915-2125 E-Mail: [email protected]

Model difference letter 2020.07.30 Dear MET Reviewer, This is a new Application from TYLT, inc. Model No.: QIBOWLWD-T, QIBOWLxx-T (where xx can be different colors) Only the model QIBOWLWD-T was tested, since the electrical circuit design, layout, components used and internal wiring were identical for the above models, with difference being color of appearance and model name. Thank you for your cooperation! Yours sincerely, Signatory: Name: Andre Sumian Position: Director of Product Management Company Name: TYLT, inc. Address: 685 Cochran St. Suite 200, Simi Valley, California 93065, United States Tel / Fax 8008435600 /805-915-2125 E-Mail: [email protected]

FCC ID: 2AOAF-230 Test Model No.:QIBOWLWD-T FCC ID: 2AOAF-230 FCC ID: 2AOAF-230

FCC ID: 2AOAF-230 Test Model No.:QIBOWLWD-T

55 4 3 2 1 DCBA

FCC ID: 2AOAF-230 FCC ID: 2AOAF-230 FCC ID: 2AOAF-230

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax: +86-755-26648637 Website: www.cqa-cert.com Report Template Version: V04 Report Template Revision Date: 2018-07-06 RF Exposure Evaluation Report The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No.: CQASZ20200700709E-02 Applicant: TYLT, inc. Address of Applicant: 685 Cochran St. Suite 200, Simi Valley, California 93065, United States Equipment Under Test (EUT): Product: Wireless Charger Model No.: QIBOWLWD-T, QIBOWLxx-T (where xx can be different colors) Test Model No.: QIBOWLWD-T Brand Name: N/A FCC ID: 2AOAF-230 Standards: 47 CFR Part 1.1307 47 CFR Part 1.1310 KDB 680106 D01 RF Exposure Wireless Charging Base App v03 Date of Receipt: 2020-07-15 Date of Test: 2020-07-15 to 2020-07-17 Date of Issue: 2020-07-24 Test Result : PASS* *In the configuration tested, the EUT complied with the standards specified above Tested By： ( Tiny You ) Reviewed By: ( Sheek Luo ) Approved By: ( Jack Ai ) Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200700709E-02 Page:2 of 12 1 Version Revision History Of Report Report No. Version Description Issue Date CQASZ20200700709E-02 Rev.01 Initial report 2020-07-24 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200700709E-02 Page:3 of 12 2 Contents Page 1 VERSION .....................................................................................................................................................................2 2 CONTENTS .................................................................................................................................................................3 3 GENERAL INFORMATION .......................................................................................................................................4 3.1 CLIENT INFORMATION ................................................................................................................................................4 3.2 GENERAL DESCRIPTION OF EUT ................................................................................................................................4 3.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD .........................................................................................4 3.4 TEST ENVIRONMENT ..................................................................................................................................................5 3.5 DESCRIPTION OF SUPPORT UNITS ...............................................................................................................................5 3.6 TEST LOCATION .........................................................................................................................................................6 3.7 TEST FACILITY ...........................................................................................................................................................6 3.8 EQUIPMENT LIST ........................................................................................................................................................6 4 RF EXPOSURE EVALUATION ................................................................................................................................7 4.1 RF EXPOSURE COMPLIANCE REQUIREMENT ..............................................................................................................7 4.1.1 Limits ..............................................................................................................................................................7 4.1.2 Test Procedure ..............................................................................................................................................7 4.1.3 Test Setup ......................................................................................................................................................8 4.1.4 Test Results ...................................................................................................................................................8 APPENDIX A: PHOTOGRAPHS OF TEST SETUP .....................................................................................................12 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200700709E-02 Page:4 of 12 3 General Information 3.1 Client Information Applicant: TYLT, inc. Address of Applicant: 685 Cochran St. Suite 200, Simi Valley, California 93065, United States Manufacturer: TYLT, inc. Address of Manufacturer: 685 Cochran St. Suite 200, Simi Valley, California 93065, United States Factory: DONGGUAN KINTEC DIGITAL TECHNOLOGY CO.,LIMITED Address of Factory: 8F, JINYE BUILDING,NO.306, CHANGQING SOUTH ROAD, CHANG'AN, DONGGUANG CITY, GUANGDONG, CHINA 3.2 General Description of EUT Product Name: Wireless Charger Model No.: QIBOWLWD-T, QIBOWLxx-T (where xx can be different colors) Test Model No.: QIBOWLWD-T Brand Name: N/A Hardware Version: M05-S351-310 Software Version: 0x49554e EUT Power Supply: DC 5V 2A, DC 9V 1.8A 3.3 Product Specification subjective to this standard Equipment Category: Non-ISM frequency Operation Frequency range: 110kHz~205kHz Modulation Type: Induction Antenna Type: Induction coil Antenna Gain: 0dBi Power: Output: 10W(Max) Note: 1. In section 15.31(m), regards to the operating frequency range less 1 MHz. 2. Model No.: QIBOWLWD-T, QIBOWLxx-T (where xx can be different colors) Only the model QIBOWLWD-T was tested, since the electrical circuit design, layout, components used and internal wiring were identical for the above models, with difference being color of appearance and model name. Shenzhen Huaxia Testing Tech…

Text truncated - open the document above for the full version.

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax: +86-755-26648637 Website: www.cqa-cert.com Report Template Version: V04 Report Template Revision Date: 2018-07-06 Test Report The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No.: CQASZ20200700709E-01 Applicant: TYLT, inc. Address of Applicant: 685 Cochran St. Suite 200, Simi Valley, California 93065, United States Equipment Under Test (EUT): Product: Wireless Charger Model No.: QIBOWLWD-T, QIBOWLxx-T (where xx can be different colors) Test Model No.: QIBOWLWD-T Brand Name: N/A FCC ID: 2AOAF-230 Standards: 47 CFR Part 15, Subpart C Date of Receipt: 2020-07-15 Date of Test: 2020-07-15 to 2020-07-23 Date of Issue: 2020-07-24 Test Result: PASS* *In the configuration tested, the EUT complied with the standards specified above Tested By： ( Tiny You ) Reviewed By: ( Sheek Luo ) Approved By: ( Jack Ai ) Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200700709E-01 Page:2 of 27 1 Version Revision History Of Report Report No. Version Description Issue Date CQASZ20200700709E-01 Rev.01 Initial report 2020-07-24 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200700709E-01 Page:3 of 27 2 Test Summary Test Item Test Requirement Test method Result Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203 ANSI C63.10 2013 PASS AC Power Line Conducted Emission 47 CFR Part 15, Subpart C Section 15.207 ANSI C63.10 2013 PASS 20dB Occupied Bandwidth 47 CFR Part 15, Subpart C Section 15.215 ANSI C63.10 2013 PASS Radiated Emission , Radiated Spurious Emissions 47 CFR Part 15, Subpart C Section 15.209 ANSI C63.10 2013 PASS Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200700709E-01 Page:4 of 27 3 Contents Page 1 VERSION .................................................................................................................................................................. 2 2 TEST SUMMARY .................................................................................................................................................... 3 3 CONTENTS .............................................................................................................................................................. 4 4 GENERAL INFORMATION ................................................................................................................................... 5 4.1 CLIENT INFORMATION .......................................................................................................................................... 5 4.2 GENERAL DESCRIPTION OF EUT .......................................................................................................................... 5 4.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD .................................................................................. 5 4.4 TEST ENVIRONMENT ............................................................................................................................................ 6 4.5 DESCRIPTION OF SUPPORT UNITS ......................................................................................................................... 6 4.6 STATEMENT OF THE MEASUREMENT UNCERTAINTY ............................................................................................. 7 4.7 TEST LOCATION ................................................................................................................................................... 7 4.8 TEST FACILITY ..................................................................................................................................................... 7 4.9 DEVIATION FROM STANDARDS ............................................................................................................................. 7 4.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 7 4.11 EQUIPMENT LIST .................................................................................................................................................. 8 5 TEST RESULTS AND MEASUREMENT DATA ................................................................................................ 9 5.1 ANTENNA REQUIREMENT ..................................................................................................................................... 9 5.2 CONDUCTED EMISSIONS ..................................................................................................................................... 10 5.3 20DB OCCUPY BANDWIDTH ............................................................................................................................... 13 5.4 RADIATED SPURIOUS EMISSION & RESTRICTED BANDS ..................................................................................... 15 5.4.1 Spurious Emissions ................................................................................................................................ 15 6 PHOTOGRAPHS - EUT TEST SETUP .............................................................................................................. 20 6.1 RADIATED EMISSION .......................................................................................................................................... 20 6.2 CONDUCTED EMISSION ...................................................................................................................................... 21 7 PHOTOGRAPHS - EUT CONSTRUCTIONAL DETAILS ............................................................................... 22 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20…

Text truncated - open the document above for the full version.

FCC ID: 2AOAF-230 1 Photographs - EUT Test Setup 1.1 Radiated Emission 9kHz~30MHz: 30MHz~1GHz: FCC ID: 2AOAF-230 1.2 Conducted Emission