2AOHHTBANDT-Band

May 12, 2023 T-BAND USER MANUAL On-boarding and Management Talitrix 3155 N Point Pkwy, Suite F-100, Alpharetta GA, 30009 TALITRIX.COM 1 LEGAL DISCLAIMER __________________________________________ PRODUCT Buyer or user, without written permission from our company must not copy, recreate,modify the product, nor disclose date or information to any third party by any means.Information or data from Talitrix is protected by copy right law - Any bodily injury, or any indirect loss resulted from any mis-operation due to not following this manual properly, cannot be borne by company. SOFTWARE The software belong to the company and the buyer or user only have the right to use. INTELLECTUAL PROPERTY STATEMENT Copyright of the manual and its information is owned by the company. Information in the manual can only be used for training or service in accordance with its original intention. Without written permission from the company, this product and information Use of this information shall by no means bereused, redesigned, communicated commercially or any other purpose either byelectric or by written form, included but not limited to activities mentioned above. Talitrix T-Band The T Band is a custom Android 11 Go wearable based on the Qualcomm 4100 + sensor hub platform. The band is designed for tracking people who have some interaction with the criminal justice system, such as those on parole or probation and/or non-citizens who are tracked for administrative purposes. Security You Can Trust o Tamper alert system covers both the app and band oTamper-resistant band oUnique lock requires specific tooling to secure both mechanically and electronically oTracking data is stored securely in the cloud Product Features oTamper Resistant Wristband oAndroid Go Operating System o4G LTE Network Communication Module oBluetooth oHigh accuracy location resolution via GPS/ 4G / Wi-Fi Magnetometer + Gyroscope + Accelerometer and Barometer oBattery life up to 4 days* oTwo Way Text Messaging for Account Management oIP68 Water-Proof and Dust Proof oOffline Tracking Capable oReal Time Tracking oDevice Alarms for – Low Battery – Tamper – Zone Violations oDevice meets NIST 800-161 Criteria I.ESD (IEC 61000-4-2) II.PTCRB II.FCC Part 1 oBattery life may vary depending on activities. *This document is proprietary and confidential. No part of this document may be disclosed in any manner to a third party without the prior written consent of Talitrix, LLC.* 2 T alitrix T-Band oCPU / Memory oQualcomm 4100 Snapdragon o1GB RAM o8GB FLASH oNo co-processor oAssisted GPS - LTE for US Carriers, bands 2, 4, 12 oWi-Fi 802.11 b/g/n oBluetooth 4.2 with BLE compatibility oSoldered SIM preloaded by carrier oQuectel BG77 module Product Specifications Radios o LCD display with touchscreen o2MP Camera oMicrophone oPiezo Hepatic Motor Interface o Charging will be accomplished with a clip-on attachment with its own battery. The clip-on itself will be charged through USB-C. oThe external battery in the clip- on power bank has 2x the capacity of the watch battery. Charging o Operating ambient temperature -10C to 50C oCharging temp 0C to 40C oStorage temp -20C to 50C oMeets IP68 environmental standards o1 Meter drop height survivability oScratch resistant glass Environmental * This document is proprietary and confidential. No part of this document may be disclosed in any manner to a third party without the prior written consent of Talitrix, LLC.* 3 - Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types) - Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion - Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or in the leakage of flammable liquid or gas - A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas DISCLAIMER T BAND LOCKING MECHINSIM AND SIDE BUTTON SCROLL FUNCTIONS TALITRIX.COM 4 T BAND SIDE BUTTON FUNCTIONS Press Once - Awaken Watch Press Again - Return Function Press and hold for 3 seconds - Return to home screen - Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types) - Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion - Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or in the leakage of flammable liquid or gas - A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas DISCLAIMER T-BAND PROCESS FLOW TALITRIX.COM 5 TALITRIX.COM 6 LABEL AND E-LABEL DESCRIPTION *This document is proprietary and confidential. No part of this document may be disclosed in any manner to a third party without the prior written consent of Talitrix, LLC.* Label: Following laser marking can be found on the back of the device: •FCC ID: •Serial Number (S/N): E-Label: Viewing E-Label Regulatory and Compliance Information The label for this device is provided electronically. The e-label may provide regulatory information, such as identification numbers provided by FCC or regional compliance marking, as well as applicable product and licensing information. 1.From the watch face, click Menu 2.Scroll to QR Code and click to display the following: I.BRAND: TALITRIX II.MODEL: TBQC4100OV1 III.FCC ID: 2AOHHTBAND IV.IC: 23465-TBAND V.CONTAINS FCC ID: XMR201912BG77 VI.CONTAINS IC: 10224A-201912BG77 The above information is programmed by Talitrix, LLC in such a manner that third parties cannot modify it. a) “No special accessories or supplemental plug-ins (e.g., installation of a SIM/USIM card) are required to access the information. Access to the information is provided without special codes, accessories, or permissions b…

Text truncated - open the document above for the full version.

Covered list Attestation Statement Date: May 22, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AOHHTBAND Thundercomm Technology Co., Ltd certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature Contact Name: Qiyong Zhou Job Title: Manager Email: [email protected]

Covered list Attestation Statement Date: May 22, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AOHHTBAND Thundercomm Technology Co., Ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature Contact Name: Qiyong Zhou Job Title: Manager Email: [email protected]

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service: • cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) • cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) • Agent can be Individual Entity or a Company Entity • Agent Entity must be located in US, US address/phone • Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) • Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“t he Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: June 26, 2023 Signed by (Printed Name/Title): Nathan Grinager / Co-President *This letter is valid indefinitely for all applications submitted within the period of 06/26/2023 - 06/25/2024 The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Thundercomm Technology Co., Ltd FCC ID: 2AOHHTBAND Contact Name: Qiyong Zhou Street Address: No. 107, Middle Datagu Road, Xiantao Street, Yubei District City/Province/Zip: Chongqing, China, 401122 Telephone No: +86 010-82036511 Email: [email protected] Applicant Signature: Date: June 26, 2023 Signed by (Printed Name/Title): Qiyong Zhou / Manager

Confidential Request Letter Date: May 22, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for confidentiality FCC ID: 2AOHHTBAND Long-Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Schematics Bill of Materials/Parts List Block Diagrams Tune-up procedure Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Short-Term Confidentiality (STC) Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Internal Photos User’s Manual External Photos Test Set-up Photos Justification: Planned Release Date STC: If no date is given, __ days from grant date will be used. Sincerely, Signature Contact Name: Qiyong Zhou Job Title: Manager Email: [email protected]

Authorization Letter Date: May 22, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AOHHTBAND To Whom It May Concern: We, the undersigned, hereby authorize the following person on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by DEKRA Testing and Certification Co., Ltd. on our behalf shall have the same effect as acts of our own. Agent Company name : DEKRA Testing and Certification Co., Ltd. Address : No. 26, Hwaya 1st Road., Guishan District, Taoyuan City, 33341, Taiwan Contact Name : Phoenix Chen Email : [email protected] We are therefore responsible for the contents of the application. Product description : T-Band Model No. : TBQC4100OV1 Brand : Talitrix Sincerely, Signature Contact Name: Qiyong Zhou Job Title: Manager Email: [email protected]

Authorization Letter Date: May 22, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AOHHTBAND To Whom It May Concern: We, the undersigned, hereby authorize the following person on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by DEKRA Testing and Certification Co., Ltd. on our behalf shall have the same effect as acts of our own. Agent Company name : DEKRA Testing and Certification Co., Ltd. Address : No. 26, Hwaya 1st Road., Guishan District, Taoyuan City, 33341, Taiwan Contact Name : Phoenix Chen Email : [email protected] We are therefore responsible for the contents of the application. Product description : T-Band Model No. : TBQC4100OV1 Brand : Talitrix Sincerely, Signature Contact Name: Qiyong Zhou Job Title: Manager Email: [email protected]

SDoC Declaration Letter Date: May 22, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: SDoC declaration letter for equipment with FCC ID: 2AOHHTBAND To Whom It May Concern: This letter is to ascertain that the device has been the unit(s) used for conducting FCC compliance testing. The SDoC portion has been conducted in accordance with FCC SDoC requirement as per Section 2.1077 compliance information. FCC Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information Unique Identifier: Brand Name: Talitrix Model No.: TBQC4100OV1 Responsible Party – U.S. Contact Information Company Name: Thundercomm Technology Co., Ltd Company Address: No. 107, Middle Datagu Road, Xiantao Street, Yubei District, Chongqing, China, 401122 Telephone number: +86 010-82036511 It's herewith confirmed to comply with the requirements of FCC Part 15 Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Sincerely, Signature Contact Name: Qiyong Zhou Job Title: Manager Email: [email protected]

Report No.: 22B0155R TEL : +886-3-582-8001 Page Number : 1 of 15 FAX : +886-3-582-8958  EUT External Photograph (1) EUT Photo (2) EUT Photo Report No.: 22B0155R TEL : +886-3-582-8001 Page Number : 2 of 15 FAX : +886-3-582-8958 (3) EUT Photo (4) EUT Photo Report No.: 22B0155R TEL : +886-3-582-8001 Page Number : 3 of 15 FAX : +886-3-582-8958 (5) EUT Photo (6) EUT Photo Report No.: 22B0155R TEL : +886-3-582-8001 Page Number : 4 of 15 FAX : +886-3-582-8958 (7) EUT Photo

LABEL AND E-LABEL DESCRIPTION *This document is proprietary and confidential. No part of this document may be disclosed in any manner to a third party without the prior written consent of Talitrix, LLC.* Following laser marking can be found on the back of the device: • FCC ID: 2AOHHTBAND • Serial Number (S/N): E-Label: Viewing E-Label Regulatory and Compliance Information The label for this device is provided electronically. The e-label may provide regulatory information, such as identification numbers provided by FCC or regional compliance marking, as well as applicable product and licensing information. 1. From the watch face, click Menu 2. Scroll to QR Code and click to display the following: I. BRAND: TALITRIX II. MODEL: TBQC4100OV1 III. FCC ID: 2AOHHTBAND IV. IC: 23465-TBAND V. PMN: T-Band VI. CONTAINS FCC ID: XMR201912BG77 VII. CONTAINS IC: 10224A-201912BG77 Watch Face Step-1: Menu: click square icon Step-2: Scroll to QR Code and click E-Label: Label Location: Others: ⚫ The product Label is under the back side of the device, and it is a laser marking cannot be moved. ⚫ The E-label information is stored on the device, no special accessories are required to access the information. ⚫ The E-label information is pre-programmed by the grantee. The user cannot modify the e- label information. ⚫ User manual provided specific instructions on how to access the E-label information. ⚫ All the applicable regulatory information required has displayed on the packaging or user instructions.

Report No.: 22B0155R TEL : +886-3-582-8001 Page Number : 5 of 15 FAX : +886-3-582-8958  EUT Internal Photograph (1) EUT Photo (2) EUT Photo (Antenna) Report No.: 22B0155R TEL : +886-3-582-8001 Page Number : 6 of 15 FAX : +886-3-582-8958 (3) EUT Photo (4) EUT Photo Report No.: 22B0155R TEL : +886-3-582-8001 Page Number : 7 of 15 FAX : +886-3-582-8958 (5) EUT Photo (6) EUT Photo Report No.: 22B0155R TEL : +886-3-582-8001 Page Number : 8 of 15 FAX : +886-3-582-8958 (7) EUT Photo (8) EUT Photo Report No.: 22B0155R TEL : +886-3-582-8001 Page Number : 9 of 15 FAX : +886-3-582-8958 (9) EUT Photo (10) EUT Photo Report No.: 22B0155R TEL : +886-3-582-8001 Page Number : 10 of 15 FAX : +886-3-582-8958 (11) EUT Photo (12) EUT Photo Report No.: 22B0155R TEL : +886-3-582-8001 Page Number : 11 of 15 FAX : +886-3-582-8958 (13) EUT Photo (14) EUT Photo Report No.: 22B0155R TEL : +886-3-582-8001 Page Number : 12 of 15 FAX : +886-3-582-8958 (15) EUT Photo (16) EUT Photo Report No.: 22B0155R TEL : +886-3-582-8001 Page Number : 13 of 15 FAX : +886-3-582-8958 (17) EUT Photo (18) EUT Photo Report No.: 22B0155R TEL : +886-3-582-8001 Page Number : 14 of 15 FAX : +886-3-582-8958 (19) EUT Photo (20) EUT Photo Report No.: 22B0155R TEL : +886-3-582-8001 Page Number : 15 of 15 FAX : +886-3-582-8958 (21) EUT Photo

Report No.: 22B1055R-SAUSV01S-A Page: 1 of 43 Test report No.: 22B1055R-SAUSV01S-A SAR Test Report Product Name T-Band Product Marketing Name T-Band Trademark Talitrix Model and /or type reference TBQC4100OV1 Applicant ́s name / address Thundercomm Technology Co., Ltd No. 107, Middle Datagu Road, Xiantao Street, Yubei District, Chongqing, China, 401122 Manufacturer ́s name Thundercomm Technology Co., Ltd FCC ID 2AOHHTBAND Applicable Standard IEEE 1528-2013 KDB 447498 D01 v06 KDB 865664 D01 v01r04 Measurement procedures 47CFR § 2.1093 KDB 248227 D01 v02r02 KDB 941225 D05 v02r05 Test Result Refer to Section 1.1 Verdict Summary IN COMPLIANCE Documented By (Supervisor / Jinn Chen) Tested By (Senior Engineer / Luke Cheng) Approved By (Assistant Manager / San Lin) Date of Receipt 2022/11/30 Date of Issue 2023/05/23 Report Version V1.0 Report No.: 22B1055R-SAUSV01S-A Page: 2 of 43 INDEX Page 1. General Information ................................................................................................................ 5 1.1 EUT Description ................................................................................................................ 5 1.2 Antenna List ...................................................................................................................... 5 1.3 SAR Test Evaluation ......................................................................................................... 6 1.4 Test Environment .............................................................................................................. 7 2. SAR Measurement System .................................................................................................... 8 2.1 DASY5 System Description ............................................................................................... 8 2.1.1 Applications .................................................................................................................... 9 2.1.2 Area Scans ..................................................................................................................... 9 2.1.3 Zoom Scan (Cube Scan Averaging) ............................................................................... 9 2.1.4 Uncertainty of Inter-/Extrapolation and Averaging .......................................................... 9 2.2 DASY5 E-Field Probe ...................................................................................................... 10 2.2.1 Isotropic E-Field Probe Specification ............................................................................ 10 2.3 Boundary Detection Unit and Probe Mounting Device ..................................................... 11 2.4 DATA Acquisition Electronics (DAE) and Measurement Server ....................................... 11 2.5 Robot ............................................................................................................................... 12 2.6 Light Beam Unit ............................................................................................................... 12 2.7 Device Holder .................................................................................................................. 13 2.8 SAM Twin Phantom ......................................................................................................... 13 3. Tissue Simulating Liquid ..................................................................................................... 14 3.1 The composition of the tissue simulating liquid ............................................................... 14 3.2 Tissue Calibration Result ................................................................................................. 15 3.3 Tissue Dielectric Parameters for Head and Body Phantoms ........................................... 16 4. SAR Measurement Procedure ............................................................................................. 17 4.1 SAR System Check ......................................................................................................... 17 4.1.1 Dipoles .......................................................................................................................... 17 4.1.2 System Check Result ................................................................................................... 17 4.2 SAR Measurement Procedure ......................................................................................... 18 5. SAR Exposure Limits ........................................................................................................... 19 6. Test Equipment List .............................................................................................................. 20 7. Measurement Uncertainty .................................................................................................... 22 8. Conducted Power Measurement (Including tolerance allowed for production unit) ..... 24 9. Test Results ........................................................................................................................... 35 9.1 SAR Test Results Summary ............................................................................................ 35 9.2 Simultaneous Transmission ............................................................................................. 40 9.2.1 Simultaneous transmission of Wi-Fi and other wireless technologies .......................... 41 10. SAR measurement variability .............................................................................................. 42 Appendix Appendix A. SAR System Check Data Appendix B. SAR measurement Data Appendix C. Test Setup Photographs Appendix D. Probe Calibration Data Appendix E. Dipole Calibration Data Appendix F. Product Photos-Please refer to the file: 22B1055R-Product Photos Report No.: 22B1055R-SAUSV01S-A Page: 3 of 43 Competences and Guarantees DEKRA is a testing laboratory competent to carry out th…

Text truncated - open the document above for the full version.

Copyright© 2022 Thundercomm Technology Co., Ltd. 1 / 7 TBQC4100OV1 ANT_1 Antenna Product Specification Rev 1.0 April, 2023 Antenna Part No : 600110000013 Copyright© 2022 Thundercomm Technology Co., Ltd. 2 / 7 CONTENTS 1. Antenna Location Drawing 2. GENERAL SPECIFICATION 3. ANTENNA PERFORMANCE Copyright© 2022 Thundercomm Technology Co., Ltd. 3 / 7 1.0 Antenna Location Copyright© 2022 Thundercomm Technology Co., Ltd. 4 / 7 2.0 General Specification 3.0 Antenna Performance 3.1 Return Loss Product name TBQC4100OV1 ANT_1 Part number 600110000013 Frequency 2400~2480 MHz Max Antenna Gain (dBi) -0.08 Polarization Linear Operating with matching -40°C to 80°C Storage with matching -40 °C to 80°C RF Power 10.0 Watts Impedance with matching 50 Ohms Antenna type PIFA Antenna Size (mm) 33.7 x 12.2 Manufacturer WelleTronics Copyright© 2022 Thundercomm Technology Co., Ltd. 5 / 7 3.2 Antenna Performance 3.3 2D Radiation Pattern Test condition: 2400MHz X-Y X-Z Y-Z -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 24002410242024302440245024602470248024902500 Free Space Efficiency Copyright© 2022 Thundercomm Technology Co., Ltd. 6 / 7 2450MHz X-Y X-Z Y-Z 2480MHz X-Y X-Z Y-Z 3.4 3D Radiation Pattern 2400 MHz 2450MHz 2480MHz Copyright© 2022 Thundercomm Technology Co., Ltd. 7 / 7

Copyright© 2022 Thundercomm Technology Co., Ltd. 1 / 7 TBQC4100OV1 ANT_2 Antenna Product Specification Rev 1.0 April, 2023 Antenna Part No : 600110000013 Copyright© 2022 Thundercomm Technology Co., Ltd. 2 / 7 CONTENTS 1. Antenna Location Drawing 2. GENERAL SPECIFICATION 3. ANTENNA PERFORMANCE Copyright© 2022 Thundercomm Technology Co., Ltd. 3 / 7 1.0 Antenna Location Copyright© 2022 Thundercomm Technology Co., Ltd. 4 / 7 2.0 General Specification 3.0 Antenna Performance 3.1 Return Loss Product name TBQC4100OV1 ANT_2 Part number 600110000013 Frequency 700~750 MHz 1710~1850 MHz 1850~1990 MHz 1990-2170 MHz Max Antenna Gain (dBi) -5.61 -3.16 -1.91 -1.35 Polarization Linear Operating with matching -40°C to 80°C Storage with matching -40 °C to 80°C RF Power 10.0 Watts Impedance with matching 50 Ohms Antenna type PIFA Antenna Size (mm) 53 x 34.5 Manufacturer WelleTronics Copyright© 2022 Thundercomm Technology Co., Ltd. 5 / 7 3.2 Antenna Performance 3.3 2D Radiation Pattern Test condition: 720MHz X-Y X-Z Y-Z -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 700710720730740750 171017301750177017901810183018501870189019101930195019701990201020302050207020902110213021502170 Free Space Efficiency Copyright© 2022 Thundercomm Technology Co., Ltd. 6 / 7 1730MHz X-Y X-Z Y-Z 1910MHz X-Y X-Z Y-Z 3.4 3D Radiation Pattern 720 MHz 1730MHz 1910MHz Copyright© 2022 Thundercomm Technology Co., Ltd. 7 / 7

Report No.：22B1055R-RFUIWL2V01-C TEL : +886-3-582-8001 Page Number : 1 of 51 FAX : +886-3-582-8958 Issued Date : Jun. 19, 2023 Report Version : V1.0 Test Report No: 22B1055R-RFUIWL2V01-C TEST REPORT FCC / ISED Rules&Regulations Product Name T- Band Brand Name Talitrix Model No. TBQC4100OV1 PMN T- Band FCC ID 2AOHHTBAND IC 23465-TBAND Applicant ́s Name / Address Thundercomm Technology Co., Ltd No. 107, Middle Datagu Road, Xiantao Street, Yubei District, Chongqing, China, 401122 Manufacturer’s N ame / Address Thundercomm Technology Co., Ltd No. 107, Middle Datagu Road, Xiantao Street, Yubei District, Chongqing, China, 401122 Test Method Requested, Standard FCC CFR Title 47 Part 15 Subpart C Section 15.247 RSS-247 Issue 2 (Feb. 2017) RSS-Gen Issue 5 (Feb. 2021) ANSI C63.10-2013 Verdict Summary IN COMPLIANCE Documented By Amelia Wu / Project Specialist Approved By Rueyyan Lin / Supervisor Date of Receipt Nov. 30, 2022 Date of Issue Jun. 19, 2023 Report Version V1.0 Report No.：22B1055R-RFUIWL2V01-C TEL : +886-3-582-8001 Page Number : 2 of 51 FAX : +886-3-582-8958 Issued Date : Jun. 19, 2023 Report Version : V1.0 INDEX page Competences and Guarantees ............................................................................................................................. 4 General Conditions ............................................................................................................................................... 4 Revision History .................................................................................................................................................... 5 1. General Information ................................................................................................................................. 6 1.1 EUT Description ....................................................................................................................................... 6 1.2 Test Mode ................................................................................................................................................ 7 1.3 Comments and Remarks ......................................................................................................................... 7 1.4 Tested System Details ............................................................................................................................. 8 1.5 Configuration of tested System ................................................................................................................ 8 1. EUT Operation of during Test ...…

Text truncated - open the document above for the full version.