FCCID.CO- FCC ID Database
HomeCompaniesEquipment ClassesSearch

© 2026 FCC ID Database. All rights reserved.

AboutContactData sourced from FCC public records
  1. Home/
  2. Shenzhen Esorun Technology Co.,LTD/
  3. 2AP2N-FARER

2AP2N-FARER3in1 Wireless charging station

Shenzhen Esorun Technology Co.,LTD
3in1 Wireless charging station - FCC ID 2AP2N-FARER - Shenzhen Esorun Technology Co.,LTD
Click to zoom

Application Details

Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHz
Date of Grant
Apr 17, 2023
Application Purpose
Original Equipment
Date of Application
Apr 17, 2023
Equipment Note
3in1 Wireless charging station
Frequency Range
0.11500000 - 0.32500000
Company
Shenzhen Esorun Technology Co.,LTD
Country
China

Documents & Files

Select a file to view

Users Manual

↗

Attestation Statements

↗
↗

Cover Letter(s)

↗

External Photos

↗

ID Label/Location Info

↗

Internal Photos

↗

RF Exposure Info

↗

Test Report

↗
↗
↗

Test Setup Photos

↗

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The distance between user and products should be no less than 20cm.

Attestation Statements

Shenzhen Esorun Technology Co.,LTD * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter 4/3/2023 ATTN.: Reviewing Engineer FCC ID: 2AP2N-FARER Per section 2.911(d)(7) of the FCC rules, Shenzhen Esorun Technology Co.,LTD certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: JOC Australia Inc Physical U.S. Company Address: 18351 Colima Road Ste 585 Rowland Heights,California,91748 United States of America Agent contact name/Title: Benjamin. Smith/Vice President Agent Email Address:[email protected]/[email protected] Tel No.: +1(626) 217 4778 FRN No.: 0033379421 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Agent Signed (if different to Applicant): Signed: Signed: Printed name: Zhang Yi Printed name: Benjamin. Smith Title: Deputy General Manager Title: Vice President Company Name: Shenzhen Esorun Technology Company Name: JOC Australia Inc Co.,LTD Date:4/3/2023 Date: 4/3/2023

Attestation Statements

Shenzhen Esorun Technology Co.,LTD Covered Equipment Certification Attestation Letter DATE April 3, 2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2AP2N-FARER Shenzhen Esorun Technology Co.,LTD. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Shenzhen Esorun Technology Co.,LTD.certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Zhang Yi Title: Deputy General Manager Company Name: Shenzhen Esorun Technology Co.,LTD Date: 4/3/2023

Cover Letter(s)

April 3, 2023 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AP2N-FARER Product Name: 3in1 Wireless charging station Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:  Schematics Long-term confidential  Block diagram Long-term confidential  Operation description Long-term confidential These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Signature: Name Zhang Yi Position Deputy General Manager Company Name Shenzhen Esorun Technology Co.,LTD Address Room 226, Building A, B, C, Zone B, Yuanfen Industrial Zone, Taoyuan Community, Dalang Street, Longhua District, Shenzhen Tel 0086-0755-23696752 Fax / Email [email protected]

External Photos

FCC ID: 2AP2N-FARER External FCC ID: 2AP2N-FARER FCC ID: 2AP2N-FARER FCC ID: 2AP2N-FARER FCC ID: 2AP2N-FARER FCC ID: 2AP2N-FARER

ID Label/Location Info

4.5cm 2.5cm Label Location FCC ID: 2AP2N-FARER Shenzhen Esorun Technology Co.,LTD Product name: 3in1 Wireless charging station Model No.: Farer 3in1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Internal Photos

FCC ID: 2AP2N-FARER Internal FCC ID: 2AP2N-FARER ANT FCC ID: 2AP2N-FARER ANT FCC ID: 2AP2N-FARER ANT FCC ID: 2AP2N-FARER

RF Exposure Info

ALPHA's reports is using a digital certificate that is trusted on Adobe's official server. If there is no digital certificate or the digital certificate shows damaged in your report. Please do not accept the report. E-mail: [email protected] Tel: 4008-3008-95 Website: http://www.a-lab.cn RF REPORT FCC ID: 2AP2N-FARER On Behalf of Shenzhen Esorun Technology Co.,LTD 3in1 Wireless charging station Model No.: Farer 3in1 Prepared for : Shenzhen Esorun Technology Co.,LTD Address : Room 226, Building A, B, C, Zone B, Yuanfen Industrial Zone, Taoyuan Community, Dalang Street, Longhua District, Shenzhen Prepared By : Shenzhen Alpha Product Testing Co., Ltd Address : Building i, No.2, Lixin Road, Fuyong Street, Bao'an District, 518103, Shenzhen, Guangdong, China Report Number : A2212031-C01-R09 Date of Receipt : March 16, 2023 Date of Test : March 16, 2023 to March 22, 2023 Date of Report : March 22, 2023 Version Number : V0 Page 2 of 14 Report No.: A2212031-C01-R09 TABLE OF CONTENTS 1 Test Result Summary ................................................................................................................................ 5 2 EUT Description ......................................................................................................................................... 6 2.1 DESCRIPTION OF DEVICE (EUT) ............................................................................................................. 6 2.2 ANCILLARY EQUIPMENT DETAILS ............................................................................................................ 6 2.3 TEST LAB INFORMATION ........................................................................................................................ 6 2.4 BLOCK DIAGRAM OF CONNECTION BETWEEN EUT AND SIMULATORS ...................................................... 8 2.5 DESCRIPTION OF TEST MODES ............................................................................................................... 8 2.6 TEST CONDITIONS ................................................................................................................................. 8 2.7 MEASUREMENT UNCERTAINTY ............................................................................................................... 9 3 Test Results and Measurement Data ..................................................................................................... 10 3.1 RF EXPOSURE TEST ............................................................................................................................ 10 4 Photos of test setup ................................................................................................................................ 12 5 Photographs of EUT ................................................................................................................................ 14 Page 3 of 14 Report No.: A2212031-C01-R09 TEST REPORT DECLARATION Applicant : Shenzhen Esorun Technology Co.,LTD Address : Room 226, Building A, B, C, Zone B, Yuanfen Industrial Zone, Taoyuan Community, Dalang Street, Longhua District, Shenzhen Manufacturer : Shenzhen Esorun Technology Co.,LTD Address : Room 226, Building A, B, C, Zone B, Yuanfen Industrial Zone, Taoyuan Community, Dalang Street, Longhua District, Shenzhen EUT Description : 3in1 Wireless charging station (A) Model No. : Farer 3in1 (B) Trademark : ESORUN Measurement Standard Used: FCC CFR Title 47 Part 15 Subpart C FCC KDB 680106 D01 RF Exposure Wireless Charging Apps v03r01 The device described above is tested by Shenzhen Alpha Product Testing Co., Ltd. to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The test results are contained in this test report and Shenzhen Alpha Product Testing Co., Ltd. is assumed full responsibility for the accuracy and completeness of test. Also, this report shows that the EUT is technically compliant with above listed standard(s) requirements. This report applies to above tested sample only. This report shall not be reproduced in parts without written approval of Shenzhen Alpha Product Testing Co., Ltd. Tested by (name + signature) ................ : Yannis Wen Project Engineer Approved by (name + signature) ........... : Reak Yang Project Manager Date of issue .......................................... : March 22, 2023 Page 4 of 14 Report No.: A2212031-C01-R09 Revision History Revision Issue Date Revisions Revised By V0 March 22, 2023 Initial released Issue Yannis Wen Page 5 of 14 Report No.: A2212031-C01-R09 1 Test Result Summary Requirement CFR 47 Section Result RF EXPOSURE §1.1307(b)(1) & KDB680106 PASS Note: 1. PASS: Test item meets the requirement. 2. Fail: Test item does not meet the requirement. 3. N/A: Test case does not apply to the test object. 4. The test result judgment is decided by the limit of test standard. Page 6 of 14 Report No.: A2212031-C01-R09 2 EUT Description 2.1 Description of Device (EUT) Product Name : 3in1 Wireless charging station Trademark : ESORUN Model Number : Farer 3in1 Power Supply : Input : 5V⎓2A, 9V⎓2A,12V⎓2A Wireless Output1(for mobile): 5W, 7.5W, 10W, 15W(Max) Wireless Output2(for Airpdods): 5W(Max) Wireless Output3(for iWatch): 3W(Max) Simultaneous Output: 10W(Max)+3W(Max)+3W(Max) Operation Frequency : 115k-205kHz and 325kHz Number of Channels : 2 Modulation Type : MSK Antenna Type : Coil Antenna Antenna Gain : 0dBi Hardware Version : V1.1 Software Version : V1.0 2.2 Ancillary equipment Details Title Manufacturer Model No. Serial No. Load YBZ N/A N/A Load N/A Adapter Shenzhen HUONIU Technology Co., Ltd. HNFCQC3024UU N/A 2.3 Test Lab information Shenzhen Alpha Product Testing Co., Ltd Building i, No.2, Lixin Road, Fuyong Street, Bao'an District, 518103, Shenzhen, Guangdong, China June 21, 2018 File on Federal Communication Commission Registration Number: 293961 Designation Number: CN1236 July 15, 2019 Certificated by IC Registrati…

Text truncated - open the document above for the full version.

Test Report

ALPHA's reports is using a digital certificate that is trusted on Adobe's official server. If there is no digital certificate or the digital certificate shows damaged in your report. Please do not accept the report. E-mail: [email protected] Tel: 4008-3008-95Website:http://www.a-lab.cn RF REPORT FCC ID: 2AP2N-FARER On Behalf of Shenzhen Esorun Technology Co.,LTD 3in1 Wireless charging station Model No.: Farer 3in1 Prepared for : Shenzhen Esorun Technology Co.,LTD Address : Room 226, Building A, B, C, Zone B, Yuanfen Industrial Zone, Taoyuan Community, Dalang Street, Longhua District, Shenzhen Prepared By : Shenzhen Alpha Product Testing Co., Ltd Address : Building i, No.2, Lixin Road, Fuyong Street, Bao'an District, 518103, Shenzhen, Guangdong, China Report Number : A2212031-C01-R08 Date of Receipt : March 16, 2023 Date of Test : March 16, 2023 to March 22, 2023 Date of Report : March 22, 2023 Version Number : V0 Page2 of38 Report No.: A2212031-C01-R08 TABLE OF CONTENTS Description Page 1 General Information .............................................................................................................................. 5 1.1 Description of Device (EUT) ....................................................................................................... 5 1.2 Ancillary equipment Details ....................................................................................................... 5 1.3 Test Lab information ................................................................................................................... 5 2 Summary of test .................................................................................................................................... 6 2.1 Test Standard description: ......................................................................................................... 6 2.2 Summary of test .......................................................................................................................... 6 2.3 Test Mode Description ................................................................................................................ 7 2.4 Test Equipment ............................................................................................................................ 8 3 Radio Spectrum Matter Test Results (RF) ......................................................................................... 10 3.1 Conducted Emission at AC power line ................................................................................... 10 3.1.1 E.U.T. Operation: ............................................................................................................. 10 3.1.2 Test Setup Diagram: ........................................................................................................ 10 3.1.3 Test Result: ....................................................................................................................... 11 3.2 20dB Occupied Bandwidth ....................................................................................................... 13 3.2.1 E.U.T. Operation: ............................................................................................................. 14 3.2.2 Test Setup Diagram: ........................................................................................................ 14 3.2.3 Test Result: ...................................................................................................................... 15 9.1 Emissions in restricted frequency bands (below 30MHz) .................................................... 18 9.1.1 E.U.T. Operation: ............................................................................................................. 18 9.1.2 Test Result: ...................................................................................................................... 19 9.2 Emissions in restricted frequency bands (30MHz - 1GHz) ................................................... 23 9.2.1 E.U.T. Operation: ............................................................................................................. 23 9.2.2 Test Result: ...................................................................................................................... 24 10 Test Setup Photos ............................................................................................................................... 26 11 EUT Constructional Details (EUT Photos) ........................................................................................ 28 Page3 of38 Report No.: A2212031-C01-R08 TEST REPORT DECLARATION Applicant : Shenzhen Esorun Technology Co.,LTD Address : Room 226, Building A, B, C, Zone B, Yuanfen Industrial Zone, Taoyuan Community, Dalang Street, Longhua District, Shenzhen Manufacturer : Shenzhen Esorun Technology Co.,LTD Address : Room 226, Building A, B, C, Zone B, Yuanfen Industrial Zone, Taoyuan Community, Dalang Street, Longhua District, Shenzhen EUT Description : 3in1 Wireless charging station (A) Model No. : Farer 3in1 (B) Trademark : ESORUN Measurement Standard Used: FCC CFR Title 47 Part 15 Subpart C Section 15.209 The device described above is tested by Shenzhen Alpha Product Testing Co., Ltd. to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The test results are contained in this test report and Shenzhen Alpha Product Testing Co., Ltd. is assumed full responsibility for the accuracy and completeness of test. Also, this report shows that the EUT is technically compliant with above listed standard(s) requirements. This report applies to above tested sample only. This report shall not be reproduced in parts without written approval of Shenzhen Alpha Product Testing Co., Ltd. Tested by (name + signature) ................ : Yannis Wen Project Engineer Approved by (name + signature) ........... : Reak Yang Project Manager…

Text truncated - open the document above for the full version.

Test Report

Fine Page 1 of 3 承 認 書 SPECIFICATION FOR APPROVAL 客戶: CUSTOMER: Shenzhen Yostand Technology Co., Ltd. 客 戶 料 號: CUST P/N: 10-0110-0239 松 岛 料 號: FINE P/N: G511-6.3UH 0.08*105P*10TS 産 品 型 號: DESC: Φ50MMX5.0MMX1.0MM 日 期: DATE: 2022/01/21 版本: Version: A.0 擬制 PREPARED BY 審核 CHECKED BY 批准 APPROVED BY 客戶承認 CUSTOMER APPROVE Address:8th Floor, Building 2, 3A High tech Industrial Park, 123 Junfa Road, Dongkeng Town, Dongguan City TEL: 0769-82989159 FAX:0769-8298915 E-mail: [email protected] Fine Page 2 of 3 版本變更履歷 Version Change History 版本 Rev. 變 更 前 Before Change 變 更 後 After Change 更 改 日 期 Change Date 批 准 Approved By A.0 New issue ---- 2020/04/24 Fine Page 3 of 3 SPECIFICATION 産 品 型 號: DESC Φ20.5x43-6.3uH-0.08x105-40mm 版本 Rev:A.0 客戶CUST: XXX 客户料号CUST P/N: 一、尺寸DIMENSION:(mm) 二、原理图SCHEMATIC DIAGRAM: A 50.0±1 B 44±1.5 C 20.5±0.5 D 30±2 E 4±2 Remark: 1.1. Cross outgoing line; Wrap 8mm (ref) wide high- temperature adhesive tape 1-2Ts around the outlet position; 3. The coil is attached to a circular hard magnetic sheet with slots, with a magnetic sheet size of 50 ± 1mm, an inner hole of 5.3mm, and a thickness of 1.0 ± 0.2mm. 三、绕线参数Winding Specification: 序号 NO. 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 Winding Direction 1 S F 丝包线0.08*105P 10Ts CCW 四、电气特性ELECTRICAL CHARACTERISTICS: 温度TEMPERATURE:25±10°C, 湿度RELATIVE HUMIDITY:65±20% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS 1 IND. S-F 3.8uH ±20%单独线圈 100KHz/1.0V LCZ METER 1062B 2 IND. S-F 6.3uH ±10%加磁片 100KHz/1.0V LCZ METER 1062B 3 DCR S-F ≤53mΩ 100KHz/1.0V LCZ METER 502B 4 Q值 S-F ≥75mΩ 100KHz/1.0V LCZ METER 502B 擬制/日期PREPARED BY/DATE審核/日期CHECKED BY/DATE 黄燕铭2022/1/21 黄锦华2022/1/21

Test Report

Fine Page 1 of 3 Address:7th Floor, Building 9, Fourth Industrial Zone, Hongxing Village, Guangming New District, Shenzhen SPECIFICATION FOR APPROVAL 客 戶: CUSTOMER: Shenzhen Yostand Technology Co., Ltd. 客 戶 料 號: CUST P/N: 10.0110.1207 松 岛 料 號: FINE P/N: 手表发射线圈6.8UH 0.08*24P*11TS 産 品 型 號: DESC: 日 期: DATE: 2021/08/18 版 本: Version: A.0 擬制 PREPARED BY 審核 CHECKED BY 批准 APPROVED BY 客戶承認 CUSTOMER APPROVE 黄燕铭 宁元安 黄锦华 TEL:0755-36820766 FAX:0755-84526500 E-mail:[email protected] Fine Page 2 of 3 Address:7th Floor, Building 9, Fourth Industrial Zone, Hongxing Village, Guangming New District, Shenzhen 版本變更履歷 Version Change History 版本 Rev. 變 更 前 Before Change 變 更 後 After Change 更 改 日 期 Change Date 批 准 Approved By A.0 New issue ---- 2018/03/09 黄锦华 Fine Page 3 of 3 Address:7th Floor, Building 9, Fourth Industrial Zone, Hongxing Village, Guangming New District, Shenzhen SPECIFICATION 産 品 型 號: DESC 苹果发射线圈15*21.5-6.8UH 版本 Rev:A.0 客戶CUST: XXX 客户料号CUST P/N: 一、尺寸DIMENSION:(mm) 二、原理图SCHEMATIC DIAGRAM: A 25±1 B 23.6±0.5 C 21.5±0.5 D 14.5±0.3 E 7.7±0.05 F 3±2 H 20±2 Remark: 1.Cross outgoing line; 2.Wrap mm (ref) wide high-temperature adhesive tape Ts around the outlet position; 3.The coil is attached to a circular hard magnetic sheet with notches at both ends. The magnetic sheet size is 25 ± 1mm, the inner hole is 7.7mm, and the thickness is 2.8 ± 0.2mm 三、绕线参数Winding Specification: 序号 NO. 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 Winding Direction 1 S F 漆包线0.08*24P 11Ts CCW 四、电气特性ELECTRICAL CHARACTERISTICS: 温度TEMPERATURE:25±10°C, 湿度RELATIVE HUMIDITY:65±20% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS 1 IND. S-F 3.1uH ±20%单独线圈 100KHz/1.0V LCZ METER 1062B 2 IND. S-F 6.8 uH ±20%单独线圈 100KHz/1.0V LCZ METER 1062B 3 DCR S-F ≤110mΩ 100KHz/1.0V LCZ METER 502B 4 Q S-F ≤32 100KHz/1.0V LCZ METER 502B 擬制/日期PREPARED BY/DATE 審核/日期CHECKED BY/DATE 黄燕铭2021/08/18 黄锦华2021/08/18

Test Setup Photos

FCC ID: 2AP2N-FARER Conducted Emission at AC power line Emissions in restricted frequency bands (below 30MHz) FCC ID: 2AP2N-FARER Emissions in restricted frequency bands (30MHz - 1GHz)

Contact Information

Applicant

Zhang Yi
[email protected]0086-0755-23696752Fax: /

Test Firm

Shenzhen Alpha Product Testing Co., LTD.Real Yak
[email protected]+86 755 29766001

Technical Specifications

#Rule PartsFrequency RangePower Output
115C0.115 MHz - 0.325 MHz-
Confidentiality
Long Term

Other Applications from Shenzhen Esorun Technology Co.,LTD

Magnet Wireless Charger - FCC ID 2AP2N-IPR26 - Shenzhen Esorun Technology Co.,LTD
2AP2N-IPR26

Magnet Wireless Charger

Feb 05, 2026

Equipment Class

DCD - Part 15 Low Power Transmitter Below 1705 kHz
Magnetic Wireless Charging - FCC ID 2AP2N-PR1S - Shenzhen Esorun Technology Co.,LTD
2AP2N-PR1S

Magnetic Wireless Charging

Sep 29, 2025

Equipment Class

DCD - Part 15 Low Power Transmitter Below 1705 kHz
Wireless Power Bank - FCC ID 2AP2N-X1045 - Shenzhen Esorun Technology Co.,LTD
2AP2N-X1045

Wireless Power Bank

May 07, 2024

Equipment Class

DCD - Part 15 Low Power Transmitter Below 1705 kHz
Wireless Charger - FCC ID 2AP2N-SUPER - Shenzhen Esorun Technology Co.,LTD
2AP2N-SUPER

Wireless Charger

Feb 13, 2023

Equipment Class

DCD - Part 15 Low Power Transmitter Below 1705 kHz
Magnetic Wireless Charger - FCC ID 2AP2N-MAGQOO-AS - Shenzhen Esorun Technology Co.,LTD
2AP2N-MAGQOO-AS

Magnetic Wireless Charger

Jan 12, 2023

Equipment Class

DCD - Part 15 Low Power Transmitter Below 1705 kHz