2APJZ-PDR03424VRController

Color Blast Tunes Tree FOR INDOOR USE ONLY Instructions Guide COLOR BLAST TM Tunes IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS. 1. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation. 2. This seasonal use product is not intended for permanent installation or use. 3. Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat. 4. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. 5. Do not let lamps rest on the supply cord or on any wire. 6. Unplug the product when leaving the house, or when retiring for the night, (or if left unattended). 7. This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it. 8. Do not use this product for other than its intended use. 9. Do not hang ornaments or other objects from cord, wire, or light string. 10. Do not close doors or windows on the product or extension cords as this may damage the wire insulation. 11. Do not cover the product with cloth, paper or any material not part of the product when in use. 12. Read and follow all instructions that are on the product or provided with the product. SAVE THESE INSTRUCTIONS. 1. Set up the tree according to the number tag sequence attached to each tree section from the bottom to the top. Section #1 from the bottom on the tree stand, followed by Section #2 on top, and so on. Random setup will result in electrical malfunction. 2. Before first use, remove all protective packing materials around the Music Controller Speaker. Do not cover the Music Controller Speaker with unnecessary items. This may cause distorted sound and damage the speaker. It can also cause the speaker to burn out. 3. To reduce the risk of fire and electric shock: a) Use only the power supply that is provided with this product. Using a different adapter will damage the lights and may cause fire, or electrical shock hazards; b) Do not install on trees that have needles, leaves or branches covering with metal or materials which look like metal; c) Do not mount or support strings in a manner that can cut or damage wire insulation. 4. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. 5. Do not connect the chain to the supply while it is in the packing. 6. The lamps are not replaceable. 7. Do not interconnect parts of this lighting chain with parts of another manufacturer's lighting chain. 8. Interconnection shall be made only by the use of the supplied connectors. Any open ends must be sealed-off before use. WARNING CAUTION ITEM #: TG76P3B20P08 Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. 1. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire. 2. When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires. 3. When not in use, store neatly in a cool, dry location protected from sunlight. Use and Care Instructions AC Adapter Input: 120 V~ / 60 Hz, 0.83 A Output: DC 24 V, 2 A Controller: DC 24 V, 2 A Technical Specifications 2 Physical Setup 1 23 c.d. e.f. 1 2 3 4 g. Remote Control Instructions Remove the insulation tab of the remote controller. Insulation Tab 6 This product may potentially trigger seizures for people with photosensitive epilepsy when using the motion effect light modes. Key Functions Multi Color Steady Glow Color Wheel Faster Light Effect For Preset Motion Slower Light Effect For Preset Motion Previous Preset Motion Effect Customizable color selection ON/OFF Warm White Steady Glow Brightness Up Next Preset Motion Effect Brightness Down Tap to display all lights in multi color steady glow Tap to display all lights in warm white steady glow Tap or to select from the 8 preset motion effects: • Fading • 3-Ring Motion • Color-Changing • Fireworks • Falling Rings • Twinkle • Multicolor Ball • Rainbow Bluetooth Connection To connect your mobile device via Bluetooth, press or button on the remote until you get to Rainbow mode. You will hear a beep, and Bluetooth will be searchable. Use your mobile device to find "Color Blast Tunes". Once connected, play the music on your phone, and music will be played through the built-in music speaker under the tree. The light effects will sync with the rhythm of the music chosen. Music will stop playing when Bluetooth is disconnected. NOTE: For the lights to receive clear signals, play the music from your mobile device at a higher volume. 8 1. Slide open the battery cover. 2. Replace with a new CR2032 button cell battery with correct polarities (+/-) as indicated. 3. Slide the battery cover closed. Battery Replacement Songs can be played via external speaker. Connect the Color Blast Tunes speaker to an external speaker with a 3.5 mm audio cable. Once connected through the audio cable, the music will be output from the external speaker instead of the Color Blast Tunes speaker. Aux Outlet AUX Aux OutletMusic Controller Speaker…

Text truncated - open the document above for the full version.

Polygroup Trading Limited Unit 606,Fairmont House, 8 Cotton Tree Drive, Central, Hong Kong, China Tel: (852)35832222 Fax: (852)35832288 Email: [email protected] Date: 2022-04-01 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: The RF chip, model AC6905B, which installed in our product Controller, Model: PDR- 034-24V, FCC ID: 2APJZ-PDR03424VR, supports BDR (GFSK), EDR (π/4-DQPSK, 8DPSK), BLE functions. For use in America and this chip only support BDR (GFSK), EDR (π/4-DQPSK). The BLE function and EDR(8DPSK) have been shielded by the manufacturer using the software. Sincerely, Signature: Daniel Liu Compliance manager

Polygroup Trading Limited Unit 606,Fairmont House, 8 Cotton Tree Drive, Central, Hong Kong, China Tel: (852)35832222 Fax: (852)35832288 Email: [email protected] FCC Confidential Authorization Date: 2022-03-08 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2APJZ-PDR03424VR In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Polygroup Trading Limited hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Daniel Liu Compliance manager

Polygroup Trading Limited Unit 606,Fairmont House, 8 Cotton Tree Drive, Central, Hong Kong, China Tel: (852)35832222 Fax: (852)35832288 Email: [email protected] QA-FR-170-B 7/29/2014 FCC Authorization Date: 2022-03-08 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We Polygroup Trading Limited, the undersigned, hereby authorizes Shenzhen Accurate Technology Co., Ltd. to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Shenzhen Accurate Technology Co., Ltd. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Daniel Liu Compliance manager

Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220128-03942E-RF External Photos Page 1 of 2 External Photos Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220128-03942E-RF External Photos Page 2 of 2

Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220128-03942E-RF LABEL AND LOCATION Page 1 of 1 FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Shenzhen Accurate Technology Co., Ltd. Project No.:SZNS220128-03942E-RF Internal Photos Page 1 of 4 Internal photos 2.4GHz RX module Shenzhen Accurate Technology Co., Ltd. Project No.:SZNS220128-03942E-RF Internal Photos Page 2 of 4 Shenzhen Accurate Technology Co., Ltd. Project No.:SZNS220128-03942E-RF Internal Photos Page 3 of 4 Shenzhen Accurate Technology Co., Ltd. Project No.:SZNS220128-03942E-RF Internal Photos Page 4 of 4 Antenna

★ Note: This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “ ”. Shenzhen Accurate Technology Co., Ltd. is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. Shenzhen Accurate Technology Co., Ltd. 1/F., Building A, Changyuan New Material Port, Science & Industry Park, Nanshan District, Shenzhen, Guangdong, P.R. China Tel: +86 755-26503290 Fax: +86 755-26503396 Web: www.atc-lab.com Version 11: 2021-11-09 Page 1 of 50 FCC-BT TEST REPORT Applicant Name : Polygroup Trading Limited Address : Unit 606,Fairmont House, 8 Cotton Tree Drive, Central, Hong Kong, China Report Number : SZNS220128-03942E-RF-00 FCC ID: 2APJZ-PDR03424VR Test Standard (s) FCC PART 15.247 Sample Description Product Type: Controller Model No.: PDR-034-24V Multiple Model(s) No.: N/A Trade Mark: N/A Date Received: 2022/01/28 Date of Test: 2022/02/18~2022/03/30 Report Date: 2022/03/30 Test Result: Pass* * In the configuration tested, the EUT complied with the standards above. Prepared and Checked By: Approved By: Black Ding Robert Li EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220128-03942E-RF-00 Version 11: 2021-11-09 Page 2 of 50 FCC-BT TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 SPECIAL ACCESSORIES ................................................................................................................................................. 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 6 EXTERNAL I/O CABLE .................................................................................................................................................. 6 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 7 SUMMARY OF TEST RESULTS ............................................................................................................................... 9 TEST EQUIPMENT LIST ......................................................................................................................................... 10 FCC §15.247 (I) & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) ................................................... 12 APPLICABLE STANDARD ............................................................................................................................................ 12 RESULT ...................................................................................................................................................................... 12 FCC §15.203 – ANTENNA REQUIREMENT .......................................................................................................... 13 APPLICABLE STANDARD ............................................................................................................................................ 13 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 13 FCC §15.207 (A) – AC LINE CONDUCTED EMISSIONS .................................................................................... 14 APPLICABLE STANDARD ............................................................................................................................................ 14 EUT SETUP ................................................................................................................................................................ 14 EMI TEST RECEIVER SETUP ....................................................................................................................................... 14 TEST PROCEDURE ............................................................................................…

Text truncated - open the document above for the full version.

Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220128-03942E-RF Test Photos Page 1 of 2 Photo of Conducted Emission Measurement Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220128-03942E-RF Test Photos Page 2 of 2 Photo of Radiated Emission Measurement (Below 1G) Photo of Radiated Emission Measurement (Above 1G)