2APPZ-W611WPortable Wi-Fi Phone

Portable Wi-Fi Phone Quick Start Guide V1.01 W611W Packing list Handset Belt Clip Quick Start Guide Battery Cover Portable Wi-Fi Phone Rechargeable BatteryPower Adapter Charging Base Distance sensor Earpiece Status Indicator Speaker Headphone jack PTT key Soft key Phone book Keypad Microphone Charging interface On-hook key/Power Off-hook key Mute key Hands-free Soft key Screen Volume Key + Volume Key - Navigation key OK key Install the battery 1. Remove the rear case: Remove the rear case of the whole machine with a little force from the handle position A of the rear case of the main unit. 2. Install the battery: Take out the battery from the packaging box, with the battery with the notch facing up, put the battery C at the battery compartment C, and pull the battery button until it completely fits the underside of the battery. 3. Install the battery cover: Take out the battery cover from the packaging box, and press the battery cover firmly along the edge of the battery compartment to ensure that the outer surface of the battery cover is completely inserted into the battery compartment and flush with the edge of the battery compartment, reaching IP67 protection level. 4. Install the back cover: Align the back cover with the buckle on the back of the main unit, press your hands along the edge of the main unit from top to bottom (there will be a "click" sound during the process), and ensure that there is no gap, it means that the back cover is fastened. Replacement battery 1. Remove the rear case: Remove the rear case of the whole machine with a little force from the handle position A of the rear case of the main unit. Remove the rear caseInstall the battery Install the battery coverInstall the back cover Battery button CC Buckle A Fanvil Technology Co., Ltd. Website: www.fanvil.com EMail: [email protected] [email protected] Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Add: 10/F Block A, Dualshine Global Science Innovation Center, Honglang North 2nd Road, Bao'an District, Shenzhen, China Remove the rear case Remove the battery cover Battery button Remove the battery A B 2. Remove the battery cover: From the back of the main unit, buckle the hand position B, and pull it upwards in the direction indicated by the arrow at the same time (depending on the strength of different users, it may be removed after two or three times of pulling; in order to ensure the protection level of the machine , it is not easy to disassemble here). 3. Remove the battery: Pull the battery button down to remove the old battery. 4. Install the battery: Take out the battery from the packaging box, with the battery with the notch facing up, put the battery C at the battery compartment C, and pull the battery button until it completely fits the underside of the battery. 5. Install the battery cover: Take out the battery cover from the packaging box, and press the battery cover firmly along the edge of the battery compartment to ensure that the outer surface of the battery cover is completely inserted into the battery compartment and flush with the edge of the battery compartment, reaching IP67 protection level. 6. Install the back cover: Align the back cover with the buckle on the back of the main unit, press your hands along the edge of the main unit from top to bottom (there will be a "click" sound during the process), and ensure that there is no gap, it means that the back cover is fastened. Special statement: This product belongs to the three-proof equipment of IP67. Under normal use, please do not disassemble the battery cover arbitrarily. After long-term disassembly, the protection level of IP67 will be affected. We are not responsible. Connect the charging base C C Install the battery Battery button Install the battery cover Install the back cover Buckle Install the belt clip Connect Wi-Fi Configuration Configuration via Web Note 1.Use Fanvil-supplied power adapter (5V/2A). A third-party power adapter may damage the handset. 2.Check the charging status on the top-right corner of the LCD screen. 1.Press Menu >Basic>9 WLAN. 2.Select Wi-Fi. Configuration via Phone 1.Press Menu > Advanced Settings (Default password 123). 2.Select Accounts: To configure enable the account, fill the SIP server address, port, user name, password etc. 1.Get the IP address from the phone: Press Menu > Status >1Network >Wi-Fi IP. 2.Login: Input the IP address in the web browser. The PC and phone should be in the same IP address segment (The default username and password are both ‘admin’.) 3.Configure: Select Accounts, and fill the relevant content. Warning - Please dispose of lifeless battery under guidance. - Recycle your device. - Replacement of a battery with an incorrect type that can defeat a safeguard (for example,in the case of some lithium battery types); - Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; - Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; - A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Used below 35°C in the state of charge Regulatory Compliance Federal Communication Commission (FCC) — USA This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it ma…

Text truncated - open the document above for the full version.

Fanvil Technology Co., LTD. ADD: 10/F Block A, Dualshine Global Science Innovation, Honglang North 2nd Road, Bao'an District,Shenzhen, 518101, China Tel: 86-0755-26402199 Email: [email protected] Date: 2022-09-22 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, The RF chip, model: AP6275S installed in our product Portable Wi-Fi Phone, model: W611W, FCC ID: 2APPZ-W611W, supports BT,BLE,2.4GWi-Fi&5G Wi-Fi function, but for marketing purpose, this prototype only supports 2.4GWi-Fi (2412-2462MHz, 802.11b/ 802.11g/ 802.11n20/802.11AX20)&5G Wi-Fi(5150-5250 MHz; 5725-5850 MHz，802.11a/n20/n40/ac20/ac40/ac80/ax20/ax40/ax80). The 5G Wi-Fi (5250-5350 MHz, 5470-5725 MHz) and 2.4GWi-Fi (802.11n40)was disabled to use by manufacture in the software, the end user has no capability to activate it. For the use of 2.4G WiFi, 802.11b mode only supports SISO mode, 802.11g supports SISO and MIMO mode. The RF module AP6275S supports 2T2R, but 5G Wi-Fi only use one antenna. Sincerely Yours, Signature Mengjiao Hu Certified Engineerun Manager

QA-FR-170-B Fanvil Technology Co., LTD. ADD: 10/F Block A, Dualshine Global Science Innovation, Honglang North 2nd Road, Bao'an District,Shenzhen, 518101, China Tel: 86-0755-26402199 Email: [email protected] FCC Authorization Date: 2022-09-22 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Fanvil Technology Co., LTD., the undersigned, Hereby authorizes Shenzhen Accurate Technology Co., Ltd. to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Shenzhen Accurate Technology Co., Ltd. on our behalf shall have the same effect as our own action. We, Fanvil Technology Co., LTD.,the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature Mengjiao Hu Certified Engineer

Fanvil Technology Co., LTD. ADD: 10/F Block A, Dualshine Global Science Innovation, Honglang North 2nd Road, Bao'an District,Shenzhen, 518101, China Tel: 86-0755-26402199 Email: [email protected] FCC Confidential Authorization Date: 2022-09-22 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2APPZ-W611W In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Fanvil Technology Co., LTD. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description  Software Security Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature Mengjiao Hu Certified Engineer

Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF External Photos Page 1 of 10 External Photos Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF External Photos Page 2 of 10 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF External Photos Page 3 of 10 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF External Photos Page 4 of 10 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF External Photos Page 5 of 10 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF External Photos Page 6 of 10 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF External Photos Page 7 of 10 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF External Photos Page 8 of 10 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF External Photos Page 9 of 10 Adapter 1: Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF External Photos Page 10 of 10 Adapter 2:

Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF LABEL AND LOCATION Page 1 of 1 FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF Internal Photos Page 1 of 9 Internal photos Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF Internal Photos Page 2 of 9 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF Internal Photos Page 3 of 9 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF Internal Photos Page 4 of 9 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF Internal Photos Page 5 of 9 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF Internal Photos Page 6 of 9 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF Internal Photos Page 7 of 9 2.4G WIFI Antenna1 BT ANT,5GWIFI ANT ,2.4G WIFI Antenna2 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF Internal Photos Page 8 of 9 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220815-37077E-RF Internal Photos Page 9 of 9

Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 1 of 23 APPENDIX C PROBE CALIBRATION CERTIFICATES Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 2 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 3 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 4 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 5 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 6 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 7 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 8 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 9 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 10 of 23 APPENDIX D DIPOLE CALIBRATION CERTIFICATES Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 11 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 12 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 13 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 14 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 15 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 16 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 17 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 18 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 19 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 20 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 21 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 22 of 23 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 23 of 23

Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 1 of 4 APPENDIX B EUT TEST POSITION PHOTOS Liquid depth ≥ 15cm Phantom Type: Twin SAM Phantom ; Type: QD000 P40 CD; Serial: 1744 Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 2 of 4 Head Left Cheek Setup Photo Head Left Tilt Setup Photo Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 3 of 4 Head Right Cheek Setup Photo Head Right Tilt Setup Photo Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 4 of 4 Body Back Setup Photo (5mm) 5 mm

Note: This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. Shenzhen Accurate Technology Co., Ltd. is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. Shenzhen Accurate Technology Co., Ltd. 1/F., Building A, Changyuan New Material Port, Science & Industry Park, Nanshan District, Shenzhen, Guangdong, P.R. China Tel: +86 755-26503290 Fax: +86 755-26503396 Web: www.atc-lab.com Version 801: 2021-11-09 Page 1 of 48 FCC SAR TEST REPORT Applicant Name : Fanvil Technology Co., LTD. Address : 10/F Block A, Dualshine Global Science Innovation, Honglang North 2nd Road, Bao'an District,Shenzhen, 518101, China Report Number : SZNS220815-37077E-SA FCC ID: 2APPZ-W611W Test Standard (s) FCC Part 2.1093 Sample Description Product Type: Portable Wi-Fi Phone Model No.: W611W Multiple Model(s) No.: N/A Trade Mark: Date Received: 2022/08/31 Date of Test: 2022/09/01-2022/09/02 Report Date: 2022/09/26 Test Result: Pass* * In the configuration tested, the EUT complied with the standards above. Prepared and Checked By: Approved By: Lance Li Candy Li EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Version 801: 2021-11-09 Page 2 of 48 FCC SAR Attestation of Test Results MODE Max. SAR Level(s) Reported(W/kg) Limit (W/kg) 2.4G Wi-Fi 1g Head SAR 0.79 1.6 1g Body SAR 0.72 5..2G Wi-Fi 1g Head SAR 0.16 1g Body SAR 0.79 5.8G Wi-Fi 1g Head SAR 0.17 1g Body SAR 0.72 Bluetooth 1g Head SAR 0.03 1g Body SAR 0.03 Simultaneous 1g Head SAR 0.91 1g Body SAR 1.26 Applicable Standards FCC 47 CFR part 2.1093 Radiofrequency radiation exposure evaluation: portable devices RF Exposure Procedures: TCB Workshop October 2016(Bluetooth Duty Factor) IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques IEC 62209-1:2016 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) KDB procedures KDB 447498 D04 Interim General RF Exposure Guidance v01 KDB 648474 D04 Handset SAR v01r03 KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04 KDB 865664 D02 RF Exposure Reporting v01r02 KDB 248227 D01 802 11 Wi-Fi SAR v02r02 Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in FCC 47 CFR part 2.1093 and has been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Version 801: 2021-11-09 Page 3 of 48 FCC SAR TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 4 EUT DESCRIPTION ................................................................................................................................................... 5 TECHNICAL SPECIFICATION ............................................................................................................................................. 5 REFERENCE, STANDARDS, AND GUIDELINES ................................................................................................. 6 SAR LIMITS ..................................................................................................................................................................... 7 FACILITIES ................................................................................................................................................................. 8 DESCRIPTION OF TEST SYSTEM .......................................................................................................................... 9 EQUIPMENT LIST AND CALIBRATION ............................................................................................................. 15 EQUIPMENTS LIST & CALIBRATION INFORMATION ........................................................................................................ 15 SAR MEASUREMENT SYSTEM VERIFICATION ............................................................................................. 16 LIQUID VERIFICATION ................................................................................................................................................... 16 SYSTEM ACCURACY VERIFICATION ............................................................................................................................... 17 SAR SYSTEM VALIDATION DATA ......................................................................................................................... 18 EUT TEST STRATEGY AND METHODOLOGY ................................................................................................. 21 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR ........................................................................... 21 CHEEK/TOUCH POSITION ................................................................................................................................…

Text truncated - open the document above for the full version.

Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 1 of 25 Plot 1#: DUT: Portable Wi-Fi Phone; Type: W611W; Serial: SZNS220815-37077E-SA-S1 Communication System: UID 0, 2.4G WIFI (0); Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.762 S/m; ε r = 40.223; ρ = 1000 kg/m 3 Phantom section: Left Section DASY5 Configuration: • Probe: EX3DV4 - SN7441; ConvF(7.54, 7.54, 7.54) @ 2472 MHz; Calibrated: 2022/05/16 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1211; Calibrated: 2022/03/01 • Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744 • Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Head Left Cheek/WLAN 802.11b Mid/Area Scan (8x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.745 W/kg Head Left Cheek/WLAN 802.11b Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 14.79 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 1.68 W/kg SAR(1 g) = 0.687 W/kg; SAR(10 g) = 0.372 W/kg Maximum value of SAR (measured) = 0.768 W/kg 0 dB = 0.768 W/kg = -1.15 dBW/kg Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 2 of 25 Plot 2#: DUT: Portable Wi-Fi Phone; Type: W611W; Serial: SZNS220815-37077E-SA-S1 Communication System: UID 0, 2.4G WIFI (0); Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.762 S/m; ε r = 40.223; ρ = 1000 kg/m 3 Phantom section: Left Section DASY5 Configuration: • Probe: EX3DV4 - SN7441; ConvF(7.54, 7.54, 7.54) @ 2472 MHz; Calibrated: 2022/05/16 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1211; Calibrated: 2022/03/01 • Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744 • Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Head Left Tilt/WLAN 802.11b Mid/Area Scan (11x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.463 W/kg Head Left Tilt/WLAN 802.11b Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 14.62 V/m; Power Drift = -0.12 dB Peak SAR (extrapolated) = 1.42 W/kg SAR(1 g) = 0.428 W/kg; SAR(10 g) = 0.222 W/kg Maximum value of SAR (measured) = 0.462 W/kg 0 dB = 0.462 W/kg = -3.35 dBW/kg Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 3 of 25 Plot 3#: DUT: Portable Wi-Fi Phone; Type: W611W; Serial: SZNS220815-37077E-SA-S1 Communication System: UID 0, 2.4G WIFI (0); Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.762 S/m; ε r = 40.223; ρ = 1000 kg/m 3 Phantom section: Right Section DASY5 Configuration: • Probe: EX3DV4 - SN7441; ConvF(7.54, 7.54, 7.54) @ 2472 MHz; Calibrated: 2022/05/16 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1211; Calibrated: 2022/03/01 • Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744 • Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Head Right Cheek/WLAN 802.11b Mid/Area Scan (11x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.543 W/kg Head Right Cheek/WLAN 802.11b Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.81 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 1.20 W/kg SAR(1 g) = 0.549 W/kg; SAR(10 g) = 0.294 W/kg Maximum value of SAR (measured) = 0.643 W/kg 0 dB = 0.643 W/kg = -1.92 dBW/kg Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 4 of 25 Plot 4#: DUT: Portable Wi-Fi Phone; Type: W611W; Serial: SZNS220815-37077E-SA-S1 Communication System: UID 0, 2.4G WIFI (0); Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.762 S/m; ε r = 40.223; ρ = 1000 kg/m 3 Phantom section: Right Section DASY5 Configuration: • Probe: EX3DV4 - SN7441; ConvF(7.54, 7.54, 7.54) @ 2472 MHz; Calibrated: 2022/05/16 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1211; Calibrated: 2022/03/01 • Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744 • Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Head Right Tilt/WLAN 802.11b Mid/Area Scan (11x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.470 W/kg Head Right Tilt/WLAN 802.11b Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 15.99 V/m; Power Drift = -0.15 dB Peak SAR (extrapolated) = 1.36 W/kg SAR(1 g) = 0.383 W/kg; SAR(10 g) = 0.221 W/kg Maximum value of SAR (measured) = 0.439 W/kg 0 dB = 0.439 W/kg = -3.58 dBW/kg Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 5 of 25 Plot 5#: DUT: Portable Wi-Fi Phone; Type: W611W; Serial: SZNS220815-37077E-SA-S1 Communication System: UID 0, 2.4G WIFI (0); Frequency: 2437 MHz;Duty Cycle: 1:1.00241 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.762 S/m; ε r = 40.223; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN7441; ConvF(7.54, 7.54, 7.54) @ 2472 MHz; Calibrated: 2022/05/16 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1211; Calibrated: 2022/03/01 • Phantom: Twin SAM; Type: QD000P40CD; Serial: 1744 • Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Body Back/WLAN 802.11b Mid/Area Scan (11x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.635 W/kg Body Back/WLAN 802.11b Mid/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 14.62 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 1.28 W/kg SAR(1 g) = 0.630 W/kg; SAR(10 g) = 0.327 W/kg Maximum value of SAR (measured) = 0.705 W/kg 0 dB = 0.705 W/kg = -1.52 dBW/kg Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-SA Page 6 of 25 Plot 6#: DUT: Portable Wi-Fi Phone; Type: W611W; Serial: SZNS220815-37077E-SA-S1 Communication System: UID 0, 2.4G WIFI (0); Fr…

Text truncated - open the document above for the full version.

Note: This report may contain data that a ★ re not covered by the A2LA accreditation and are marked with an asterisk “ ”. Shenzhen Accurate Technology Co., Ltd. is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. Shenzhen Accurate Technology Co., Ltd. 1/F., Building A, Changyuan New Material Port, Science & Industry Park, Nanshan District, Shenzhen, Guangdong, P.R. China Tel: +86 755-26503290 Fax: +86 755-26503396 Web: www.atc-lab.com Version 12: 2021-11-09 Page 1 of 150 FCC- BLE&2.4G Wi-Fi TEST REPORT Applicant Name : Fanvil Technology Co., LTD. Address : 10/F Block A, Dualshine Global Science Innovation, Honglang North 2nd Road, Bao'an District,Shenzhen, 518101, China Report Number : SZNS220815-37077E-RF-00B FCC ID: 2APPZ-W611W Test Standard (s) FCC PART 15.247 Sample Description Product Type: Portable Wi-Fi Phone Model No.: W611W Multiple Model(s) No.: N/A Trade Mark: Date Received: 2022/08/15 Report Date: 2022/09/28 Test Result: Pass* * In the configuration tested, the EUT complied with the standards above. Prepared and Checked By: Approved By: Andy Yu Candy Li EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220815-37077E-RF-00B Version 12: 2021-11-09 Page 2 of 150 FCC- BLE&2.4G Wi-Fi TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 7 EUT EXERCISE SOFTWARE .......................................................................................................................................... 7 DUTY CYCLE ................................................................................................................................................................ 7 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 7 EXTERNAL I/O CABLE .........................................................................................…

Text truncated - open the document above for the full version.