2APTY-PH156MOBILE PHONE HOLDERREMOTE CONTROL

LeadingPlus Electronic Co.,Ltd U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: March 20, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2APTY-PH156 LeadingPlus Electronic Co.,Ltd (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: LeadingPlus Electronic Co.,Ltd FRN: 0027524008 Address: Room 102, Building A2, Demei lndustrial Center, Donghuan 2nd Road, Longhua Street, Shenzhen, Guangdong, China Signature: Contact Person: Jessie Chen Tel: 0755-82512157 Email: [email protected]

Rev 1/26/2023 LeadingPlus Electronic Co.,Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-20-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2APTY-PH156 [LeadingPlus Electronic Co.,Ltd] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [LeadingPlus Electronic Co.,Ltd] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Jessie Chen Rev 1/26/2023 LeadingPlus Electronic Co.,Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-20-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2APTY-PH156 [LeadingPlus Electronic Co.,Ltd] ce8rtifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Jessie Chen

LeadingPlus Electronic Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 20, 2026 Subject; Request for Confidentiality FCC ID: 2APTY-PH156 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Jessie Chen Title: Sales Manager

LeadingPlus Electronic Co.,Ltd Date: March 20, 2026 Product Model Number: PH 156, PH156A, PH156B, PH156C, PH312, PH313 FCC ID: 2APTY-PH156 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. C By: Jessie Chen Title: Sales Manager Email: [email protected] Telephone: 0755-82512157 On behalf of: LeadingPlus Electronic Co.,Ltd

LeadingPlus Electronic Co.,Ltd Model Difference Statement Date: March 20, 2026 Product Model Number: PH 156 FCC ID: 2APTY-PH156 Dear Sir/Madam, Added models PH156A, PH156B, PH156C, PH312, PH313 basis of the original product PH 156 The manufacturer declares that the listed series models have different appearance colors, shapes and model names from the main model, but the circuits and electronic structures are the same. Sincerely, By: Jessie Chen Title: Sales Manager Email: [email protected] Telephone: 0755-82512157 On behalf of: LeadingPlus Electronic Co.,Ltd

Report No: DSP26010319-1E FCC ID: 2APTY-PH156 Annex of Test Report Annex A. EUT External Photos Model: PH 156 EUT View 1 EUT View 2 Report No: DSP26010319-1E FCC ID: 2APTY-PH156 Annex of Test Report EUT View 3 EUT View 4 Report No: DSP26010319-1E FCC ID: 2APTY-PH156 Annex of Test Report EUT View 5 EUT View 6

Report No: DSP26010319-1E FCC ID: 2APTY-PH156 Annex of Test Report Annex D. Label and Information FCC Label Sample FCC Labe Size: 2cm x 1cm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label Location

Report No: DSP26010319-1E FCC ID: 2APTY-PH156 Annex of Test Report Annex B. EUT Internal Photos EUT Internal View 1 EUT Internal View 2 PCB ANT Report No: DSP26010319-1E FCC ID: 2APTY-PH156 Annex of Test Report EUT Internal View 3 EUT Internal View 4 Report No: DSP26010319-1E FCC ID: 2APTY-PH156 Annex of Test Report EUT Internal View 5

FCC ID: 2APTY-PH156 RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1093，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. For BLE Max Conducted Power(dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit -5.01 -5(±1) -4 0.4 2440 5 0.1249638 3.0 So a SAR test is not required

Report No: DSP26010319-1E FCC Test Report Page 1 of 33 FCC TEST REPORT FCC ID: 2APTY-PH156 Report No. : DSP26010319-1E Applicant : LeadingPlus Electronic Co.,Ltd Product Name : MOBILE PHONE HOLDERREMOTE CONTROL Model Name : PH 156 Test Standard : FCC Part 15.247 Date of Issue : 2026-01-29 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: DSP26010319-1E FCC Test Report Page 2 of 33 Test Report Basic Information Applicant..................................: LeadingPlus Electronic Co.,Ltd Address of Applicant...............: Room 102, Building A2, Demei lndustrial Center, Donghuan 2nd Road, Longhua Street, Shenzhen, Guangdong, China Manufacturer..........................: LeadingPlus Electronic Co.,Ltd Address of Manufacturer........: Room 102, Building A2, Demei lndustrial Center, Donghuan 2nd Road, Longhua Street, Shenzhen, Guangdong, China Product Name.........................: MOBILE PHONE HOLDERREMOTE CONTROL Brand Name.............................: - Main Model..............................: PH 156 Series Models..........................: PH156A, PH156B, PH156C, PH312, PH313 Test Standard..........................: FCC Part 15 Subpart C KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2026-01-12 to 2026-01-14 Test Result...............................: PASS Tested By ................................: (Colin Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: DSP26010319-1E FCC Test Report Page 3 of 33 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 16 5.1 Standard and Limit.............................................................................................................................................. 16 5.2 Test Procedure.................................................................................................................................................... 16 5.3 Test Data and Results .......................................................................................................................................... 18 6. Band-edge Emissions(Radiated) ............................................................................................................................... 22 6.1 Standard and Limit.............................................................................................................................................. 22 6.2 Test Procedure.................................................................................................................................................... 22 6.3 Test Data and Results ..................................................................…

Text truncated - open the document above for the full version.

2.4G-2.48GBandOnboardSerpentineAntennaTestReport SPECIFICATIONS Frequency（MHz） 2400-2480 PeakGain（dBi）2.338 AverageGain（dBi） >-5.5 VSWR<3.2 Impedance(Ω) 50Ω AntennaType PlannarInvertedFAntennaonboard PolarizationLinear ManufactureZHUHAIJIELITECHNOLOGYCO.,LTD Address: No.333KexingRoad,NanpingSciencePark,XiangzhouDistrict, Zhuhai Testequipment HWA-TECH AntennaPhoto&Length(mm) 天线无源S参数： AntennapassiveS-parameters: 驻波比（ VSWR ）、回波损耗（ ReturnLoss ）及史密斯圆图（ Smith ） 天线效率及增益： Antennaefficiencyandgain ： Frequency（MHz）Gain（dBi）Effciency（%）AverageGain（dBi）Efficiency（dB） 24002.33859.39%-2.915-2.263 24101.60349.11%-3.883-3.088 24201.29546.04%-4.014-3.369 24300.38836.89%-4.91-4.331 24400.18734.00%-5.276-4.685 24500.0231.71%-5.431-4.988 24600.50734.88%-5.02-4.575 24700.29131.89%-5.323-4.963 24800.42932.89%-5.195-4.83 Average0.7839.64%-4.66-4.12 Peak2.33859.39%-2.915-2.263 天线2400MHz2D-ThetaPattern 天线2400MHz2D-PhiPattern 2400MHz3D-TotalPattern

Report No: DSP26010319-1E FCC ID: 2APTY-PH156 Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View Below 1GHz Report No: DSP26010319-1E FCC ID: 2APTY-PH156 Annex of Test Report Radiated Emission Test View Above 1GHz