2APX7K58Smart phone

Basic Operations Switch on Touch and hold the Power button until the phone switches on. Note: If you have enabled USIM/SIM locking in the Settings menu, enter the correct PIN number upon power-on before you use the phone. Caution: Three consecutive attempts of entering an incorrect PIN will lock the SIM card. If it is locked, use a PUK provided by the operator to unlock it. Switch off Touch and hold the “Power button” until the Phone Options screen displays. Tap " Power off ” to switch off the phone. Unlock Short press the “Power button” light up the screen, according to the clues of the screen interface can be unlocked. Touchscreen Usage Use your fingers to perform operations directly on icons, buttons, and the on-screen keypad. Tap/Touch/Click Tap the icon of an App to start it. Touch & Hold Touch and hold an item to display a pop-up menu of options. For example, go to Address Book, touch and hold a contact on the Address Book page, and a menu of options pops up. Drag Tap an item on the screen and drag it to another place. Slide/Sweep To sweep vertically or horizontally across the screen, you can view apps, pictures, and webpages in a convenient manner. Scroll Similar to sweeping, but faster. Pinch Put two fingers on the screen to pinch in or out an item, such as a webpage or picture. Home Screen 1. Status bar: allows you to view status icons and notices, such as signal, battery, current time and data service. 2. Notification bar: On the Home screen, tap the status bar and drag it down to display the notification bar. Tap this bar. Then you can view the notices. Touch the return button to switch back to the previous page. 3. App icon: Tap an app to open it. 4. Main menu: Slide your finger up to enter the main menu of the application.. Phone Settings To display the Settings menu, tap the Settings icon directly. 1.SIM card: In the Settings menu, choose SIM Card. You can then manage your SIM cards on the pop-up page. 2. Network: In the Settings menu, select WLAN to configure your radio network; or select Traffic usage to configure your mobile date services; or select Mobile Network under More to configure data services of your phone. 3. Sound: In the Settings menu, choose Sound. The allows you to set the volume, enable/disable vibration during ringing, and select ringtones for incoming calls and messages, as well as enable/disable keypad touch sound effect, touch alert tone, and screen lock tone 4. Display: allows you to configure the brightness, wallpaper, automatic device rotation, sleep duration, and font size. 5. Security: In the Settings menu, choose Security. The Security page allows you to set the screen locking mode and USIM/SIM locking mode. App Permission: allows you to configure certain permissions for an App and monitor their usage. 6. Anti-theft: allows you to remotely lock the phone or clear all data of it. 7. Manage apps: In the Settings menu, choose Apps. Then you can view or manage your apps. Note: Disable or unload certain apps if available space is less than 100MB. 8. Message: On the Message page, tap the Menu button and choose Settings. On the Message Settings page, you can enable/disable report sending, create or select a message template, and configure a message alert tone for each short or multimedia message. 9. Call: To display the Call Settings page, choose Settings on the Call page. Shortcuts On the Home screen, lightly drag down the Status bar. On the screen top, a group of shortcuts are displayed, such as Settings, WLAN, Bluetooth, Brightness, Auto-rotate, flashlight Airplane mode and so on. Tap any of them to open it quickly. Shortcut menu Powered by Android™ 11 (Go edition) provides several easy-to-use shortcut menus on the home screen. On this screen, long press on the screen, the selection menu of the shortcut function menu will pop up. Click the menu of the desired settings and complete the function settings according to the prompts. Move/Uninstall apps 1. Access the App main menu from the Home screen. On the ALL App page, tap and hold an app to be put on the Home screen, and drag it left or right to locate it at a proper place. In this way, a desktop app is created. 2. On the All App page, tap and hold an app, and drag it to Uninstall on the desktop. In this way, the app is removed from the phone. Note: You are not allowed to uninstall basic apps of the phone. 3. On the All App page, tap and hold an app, and drag it to APP Info. on the desktop. In this way, details about the app is displayed. Call This phone allows you to make or answer a call, initiate an emergency call, and launch a multi-party call. On the bottom left of the Home screen, tap the Dial-up icon. The Dial-up page is displayed. Enter a phone number and choose between card 1 and card 2 to make the call. When you enter the number, the phone will automatically search among all contacts a number that best matches the entered numerals, to facilitate your operation. During a call, tap Add a Call, and this call automatically switches to Silent mode. Enter the number of another contact, tap Dial-up, and the previous call automatically switches to On-hold mode. After the second call is answered, tap Join. In this way, a teleconference is established to achieve a multi-party talk. Note: You need to subscribe to this service from your carrier before you use it. You are also allowed to initiate a call by selecting a phone number from the list of contacts or the Message page. Contacts Tap Contacts to open it. The Contacts page offers management functions. It allows you to view the list of contacts and related details, make a call or send an SMS to a certain contact, and share the contact. Contact import: On the Contacts page, tap the Menu button, and choose Import/Export to select a mode for importing or exporting a contact. Add a contact: On the lower right of the Contacts page, tap the Add button to add a contact to your phone or USIM/SIM. Enter the name and number, and tap Finish. In this way, a cont…

Text truncated - open the document above for the full version.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date: Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2APX7K58 K58 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： RENATO TAVARES / Company: KRIPTO MOBILE CORPORATION Address: 7236 NW 31ST STREET, MIAMI, FL 33122,United States Phone: +1 305 499 3333 Fax: +1 786 693 8098 E-Mail: [email protected]

KRIPTO MOBILE CORPORATION 7236 NW 31ST STREET, MIAMI, FL 33122,United States Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: We, KRIPTO MOBILE CORPORATION the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2APX7K58 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： RENATO TAVARES / Company: KRIPTO MOBILE CORPORATION Address: 7236 NW 31ST STREET, MIAMI, FL 33122,United States Phone: +1 305 499 3333 Fax: +1 786 693 8098 E-Mail: [email protected]

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 1 of 4 EXTERIOR PHOTOGRAPHS OF EUT Fig.1 Fig.2 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 2 of 4 Fig.3 Fig.4 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 3 of 4 Fig.5 Fig.6 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 4 of 4 Fig.7 Fig.8

Label Location: FCC ID: 2APX7K58

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 1 of 5 INTERIOR PHOTOGRAPHS OF EUT Fig.1 Fig.2 LTE diversity antenna LTE/WCDMA /GSM Main antenna WiFi/Bluetooth /FM/GNSS antenna Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 2 of 5 Fig.3 Fig.4 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 3 of 5 Fig.5 Fig.6 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 4 of 5 Fig.7 Fig.8 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Page 5 of 5 Fig.9

Impedance Plot for SN 47/14 DIP 0G750-340; 750Head Calibrated impedance: 54.2Ω+3.9JΩ; Measurement impedance: 57.7Ω-3.0jΩ(within 5Ω) Calibrated return loss: -25.20dB; Measurement return loss: -24.41 dB(within 20%) SN 29/15 DIP 0G835-383; 835Head Calibrated impedance: 56.3Ω+0.8JΩ; Measurement impedance: 55.1Ω-4.7jΩ(within 5Ω) Calibrated return loss: -24.51dB; Measurement return loss: -24.34 dB(within 20%) SN 46/11 DIP 1G800-186; 1800Head Calibrated impedance: 46.7Ω+3.0JΩ; Measurement impedance: 47.3Ω+1.6jΩ(within 5Ω) Calibrated return loss: -26.66dB; Measurement return loss: -28.54 dB(within 20%) SN 46/11 DIP 1G900-187; 1900Head Calibrated impedance: 50.7Ω+4.1JΩ; Measurement impedance: 48.2Ω+3.1jΩ(within 5Ω) Calibrated return loss: -27.75dB; Measurement return loss: -28.32 dB(within 20%) SN 46/11 DIP 2G450-189; 2450Head Calibrated impedance: 49.8Ω+3.3JΩ; Measurement impedance: 51.9Ω-4.5jΩ (within 5Ω) Calibrated return loss: -29.54dB; Measurement return loss: -29.55 dB(within 20%) SN 47/14 DIP 2G600-342; 2600Head Calibrated impedance: 55.5Ω+2.6JΩ; Measurement impedance: 57.7Ω+4.8jΩ(within 5Ω) Calibrated return loss: -24.86dB; Measurement return loss: -23.18 dB(within 20%)

Impedance Plot for SN 47/14 DIP 0G750-340; 750Head Calibrated impedance: 54.2Ω+3.9JΩ; Measurement impedance: 55.1Ω-2.2jΩ(within 5Ω) Calibrated return loss: -25.20dB; Measurement return loss: -23.05 dB(within 20%) SN 29/15 DIP 0G835-383; 835Head Calibrated impedance: 56.3Ω+0.8JΩ; Measurement impedance: 57.1Ω-5.0jΩ(within 5Ω) Calibrated return loss: -24.51dB; Measurement return loss: -22.89 dB(within 20%) SN 46/11 DIP 1G800-186; 1800Head Calibrated impedance: 46.7Ω+3.0JΩ; Measurement impedance: 48.5Ω+2.3jΩ(within 5Ω) Calibrated return loss: -26.66dB; Measurement return loss: -27.3 dB(within 20%) SN 46/11 DIP 1G900-187; 1900Head Calibrated impedance: 50.7Ω+4.1JΩ; Measurement impedance: 48.6Ω+2.9jΩ(within 5Ω) Calibrated return loss: -27.75dB; Measurement return loss: -28.54 dB(within 20%) SN 46/11 DIP 2G450-189; 2450Head Calibrated impedance: 49.8Ω+3.3JΩ; Measurement impedance: 50.9Ω-2.1jΩ(within 5Ω) Calibrated return loss: -29.54dB; Measurement return loss: -31.08 dB(within 20%) SN 47/14 DIP 2G600-342; 2600Head Calibrated impedance: 55.5Ω+2.6JΩ; Measurement impedance: 57.2Ω+3.2jΩ(within 5Ω) Calibrated return loss: -24.86dB; Measurement return loss: -23.1 dB(within 20%)

CALIBRATION DATA PROBE CALIBRATION DATA DIPOLE CALIBRATION DATA

Page 1 of 185 Report No.: AGC10211220101FH01 Page 2 of 185 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Feb. 15, 2022 Valid Initial Release Report No.: AGC10211220101FH01 Page 3 of 185 Applicant Name KRIPTO MOBILE CORPORATION Applicant Address 7236 NW 31ST STREET, MIAMI, FL 33122, United States Manufacturer Name KRIPTO MOBILE CORPORATION Manufacturer Address 7236 NW 31ST STREET, MIAMI, FL 33122, United States Factory Name KRIPTO MOBILE CORPORATION Factory Address 7236 NW 31ST STREET, MIAMI, FL 33122, United States Product Designation Smart phone Brand Name Model Name K58 EUT Voltage DC3.85V by battery Applicable Standard IEEE Std. 1528:2013 FCC 47 CFR Part 2§2.1093 -2005 IEC 62209-1: 2016 Test Date Jan. 20, 2022 to Jan. 26, 2022 Report Template AGCRT-US-4G/SAR (2021-04-20) Note: The results of testing in this report apply to the product/system which was tested only. Prepared By Thea Huang (Project Engineer) Jan. 26, 2022 Reviewed By Calvin Liu (Reviewer) Feb. 15, 2022 Approved By Max Zhang (Authorized Officer) Feb. 15, 2022 Report No.: AGC10211220101FH01 Page 4 of 185 1. SUMMARY OF MAXIMUM SAR VALUE ......................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................... 6 2.1. EUT D ESCRIPTION ......................................................................................................................................... 6 3. SAR MEASUREMENT SYSTEM ........................................................................................................................ 8 3.1. T HE SATIMO SYSTEM USED FOR PERFORMING COMPLIANCE TESTS CONSISTS OF FOLLOWING ITEMS .................. 8 3.2. COMOSAR E-F IELD P ROBE .......................................................................................................................... 9 3.3. R OBOT .......................................................................................................................................................... 9 3.4. V IDEO P OSITIONING S YSTEM ........................................................................................................................ 10 3.5. D EVICE H OLDER .......................................................................................................................................... 10 3.6. SAM T WIN P HANTOM ................................................................................................................................... 11 4. SAR MEASUREMENT PROCEDURE .............................................................................................................. 12 4.1. S PECIFIC A BSORPTION R ATE (SAR) .............................................................................................................. 12 4.2. SAR M EASUREMENT P ROCEDURE ................................................................................................................ 13 4.3. RF E XPOSURE C ONDITIONS ......................................................................................................................... 15 5. TISSUE SIMULATING LIQUID ......................................................................................................................... 17 5.1. T HE COMPOSITION OF THE TISSUE SIMULATING LIQUID ..................................................................................... 17 5.2. T ISSUE D IELECTRIC P ARAMETERS FOR H EAD AND B ODY P HANTOMS ............................................................... 18 5.3. T ISSUE C ALIBRATION R ESULT ....................................................................................................................... 19 6. SAR SYSTEM CHECK PROCEDURE ........................................................................................................... 21 6.1. SAR S YSTEM C HECK P ROCEDURES ............................................................................................................. 21 6.2. SAR S YSTEM C HECK ................................................................................................................................... 22 7. EUT TEST POSITION ...................................................................................................................................... 24 7.1. D EFINE T WO I MAGINARY L INES ON THE H ANDSET ........................................................................................... 24 7.2. C HEEK P OSITION ......................................................................................................................................... 25 7.3. T ILT P OSITION .............................................................................................................................................. 25 7.4. B ODY W ORN P OSITION ................................................................................................................................ 26 8. SAR EXPOSURE LIMITS ............................................................................................................................... 27 9. TEST FACILITY .............................................................................................................................................. 28 10. TEST EQUIPMENT LIST .............................................................................................................................. 29 11. MEASUREMENT UNCERTAINTY ................................................................................................................ 30 12. CONDUCTED POWER MEASUREMENT ..................................................................................................... 34 13. TEST RESULTS ........................................................................................................................................... 57 13.1. SAR T ES…

Text truncated - open the document above for the full version.

Report No.: AGC10211220101FH01 Page 141 of 185 Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 0.5320 0.3664 0.2269 0.1422 0.0883 0.0553 0.0344 3D screen shot Hot spot position Report No.: AGC10211220101FH01 Page 142 of 185 Test Laboratory: AGC Lab Date: Jan. 21, 2022 LTE Band 4 Mid-Body-Back (1 RB#0) Communication System: LTE; Communication System Band: LTE Band 4; Duty Cycle:1:1; Conv.F=4.57; Frequency:1732.5 MHz; Medium parameters used: f = 1800 MHz; = 1.36 mho/m; r =40.56; = 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (): 21.0, Liquid temperature (): 20.8 SATIMO Configuration: Probe: SSE5; Calibrated: Aug. 17, 2021; Serial No.: SN 24/20 EP336 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: ELLI39 Phantom Measurement SW: OpenSAR V4_02_35 Configuration/ LTE Band 4 Mid-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ LTE Band 4 Mid-Body-Back/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5m; Area Scan dx=8mm dy=8mm, h= 5.00 mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom ELLI Device Position Body Back Band LTE Band 4 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=5.00, Y=-22.00 SAR Peak: 1.40 W/kg SAR 10g (W/Kg) 0.469373 SAR 1g (W/Kg) 0.857955 Report No.: AGC10211220101FH01 Page 143 of 185 Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 1.4095 0.9046 0.5058 0.2893 0.1639 0.0928 0.0533 3D screen shot Hot spot position Report No.: AGC10211220101FH01 Page 144 of 185 Test Laboratory: AGC Lab Date: Jan. 21, 2022 LTE Band 4 High-Body-Back (1 RB#0) Communication System: LTE; Communication System Band: LTE Band 4; Duty Cycle:1:1; Conv.F=4.57; Frequency:1745 MHz; Medium parameters used: f = 1800 MHz; = 1.36 mho/m; r =40.56; = 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (): 21.0, Liquid temperature (): 20.8 SATIMO Configuration: Probe: SSE5; Calibrated: Aug. 17, 2021; Serial No.: SN 24/20 EP336 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: ELLI39 Phantom Measurement SW: OpenSAR V4_02_35 Configuration/ LTE Band 4 High-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ LTE Band 4 High-Body-Back/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5m; Area Scan dx=8mm dy=8mm, h= 5.00 mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom ELLI Device Position Body Back Band LTE Band 4 Channels High Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=5.00, Y=-22.00 SAR Peak: 1.07 W/kg SAR 10g (W/Kg) 0.426999 SAR 1g (W/Kg) 0.831129 Report No.: AGC10211220101FH01 Page 145 of 185 Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 1.0779 0.5461 0.1956 0.0722 0.0263 0.0099 0.0038 3D screen shot Hot spot position Report No.: AGC10211220101FH01 Page 146 of 185 Test Laboratory: AGC Lab Date: Jan. 24, 2022 LTE Band 5 Mid-Touch-Right (1 RB#0) DUT: Smart phone; Type: K58 Communication System: LTE; Communication System Band: LTE Band 5; Duty Cycle:1:1; Conv.F=5.21 Frequency: 836.5 MHz; Medium parameters used: f = 835 MHz; =0.90 mho/m; r =41.35; = 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (): 22.0, Liquid temperature (): 21.8 SATIMO Configuration: Probe: SSE5; Calibrated: Aug. 17, 2021; Serial No.: SN 24/20 EP336 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_35 Configuration/ LTE Band 5 Mid- Touch-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ LTE Band 5 Mid- Touch-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan dx=8mm dy=8mm, h= 5.00 mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band LTE Band 5 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-49.00, Y=-40.00 SAR Peak: 0.45 W/kg SAR 10g (W/Kg) 0.242092 SAR 1g (W/Kg) 0.341556 Report No.: AGC10211220101FH01 Page 147 of 185 Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 0.4520 0.3538 0.2634 0.2025 0.1544 0.1172 0.0909 3D screen shot Hot spot position Report No.: AGC10211220101FH01 Page 148 of 185 Test Laboratory: AGC Lab Date: Jan. 24, 2022 LTE Band 5 Mid-Body-Back (1 RB#0) Communication System: LTE; Communication System Band: LTE Band 5; Duty Cycle:1:1; Conv.F=5.21 Frequency:836.5 MHz; Medium parameters used: f = 835 MHz; =0.90mho/m; r =41.35; = 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (): 22.0, Liquid temperature (): 21.8 SATIMO Configuration: Probe: SSE5; Calibrated: Aug. 17, 2021; Serial No.: SN 24/20 EP336 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: ELLI39 Phantom Measurement SW: OpenSAR V4_02_35 Configuration/ LTE Band 5 Mid-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ LTE Band 5 Mid-Body-Back/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5m; Area Scan dx=8mm dy=8mm, h= 5.00 mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom ELLI Device Position Body Back Band LTE Band 5 Channels Middle Signal OFDM (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=14.00, Y=-32.00 SAR Peak: 0.47 W/kg SAR 10g (W/Kg) 0.186250 SAR 1g (W/Kg) 0.308639 Report No.: AGC10211220101FH01 Page 149 of 185 Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 0.4675 0.3281 0.2104 0.1367 0.0912 0.0621 0.0427 3D screen shot Hot spot position Report No.: AGC10211220101FH01 Page 150 of 185 Test Laboratory: AGC Lab Date: Jan. 22, 2022 LTE Band 7 Mid-Touch-Left (1RB#0) DUT: Smart phone; Type: K58 Communication System: LTE; Communication System Band: LTE Band 7; Duty Cycle:1:1; Conv.F=3.89 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; =1.93 mho/m; r =38.90; = 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (): 21.3, Liquid temperature (): 21.2 SATIMO Configuration: Probe: SSE5; Calibrated: Aug. 17, 2021; Serial No.: SN 24/20 EP336 Sensor-Surface: 4mm (Mechanical Surface Detection) Phantom: SAM twin phantom Measurement SW: OpenSAR V4_02_35 Configuration/ LTE BAND 7 Mid-Touch-Left/Area Scan: Measurement grid: dx=8mm, …

Text truncated - open the document above for the full version.

Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 1 of 129 RF Test Data for LTE (Conducted Measurement) Product Name: Smart phone Trade Mark: Test Model: K58 Sample ID: TZ220102866-1# FCC ID: 2APX7K58 Environmental Conditions Temperature: 23.8°C Relative Humidity: 56% ATM Pressure: 100.0 kPa Test Engineer: Anna Hu Supervised by: Hugo Chen Remark: For LTE Band2 Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 2 of 129 Band Edge and Emission Mask Band Bandwidth(MHz) UL Frequency(MHz) Modulation RB Size RB Offset Conclusion Band2 1.4 1850.7 QPSK 6 LOW Pass Band2 1.4 1850.7 QPSK 1 LOW Pass Band2 1.4 1850.7 16QAM 6 LOW Pass Band2 1.4 1850.7 16QAM 1 LOW Pass Band2 1.4 1909.3 QPSK 6 LOW Pass Band2 1.4 1909.3 QPSK 1 HIGH Pass Band2 1.4 1909.3 16QAM 6 LOW Pass Band2 1.4 1909.3 16QAM 1 HIGH Pass Band2 3 1851.5 QPSK 15 LOW Pass Band2 3 1851.5 QPSK 1 LOW Pass Band2 3 1851.5 16QAM 15 LOW Pass Band2 3 1851.5 16QAM 1 LOW Pass Band2 3 1908.5 QPSK 15 LOW Pass Band2 3 1908.5 QPSK 1 HIGH Pass Band2 3 1908.5 16QAM 15 LOW Pass Band2 3 1908.5 16QAM 1 HIGH Pass Band2 5 1852.5 QPSK 25 LOW Pass Band2 5 1852.5 QPSK 1 LOW Pass Band2 5 1852.5 16QAM 25 LOW Pass Band2 5 1852.5 16QAM 1 LOW Pass Band2 5 1907.5 QPSK 25 LOW Pass Band2 5 1907.5 QPSK 1 HIGH Pass Band2 5 1907.5 16QAM 25 LOW Pass Band2 5 1907.5 16QAM 1 HIGH Pass Band2 10 1855 QPSK 50 LOW Pass Band2 10 1855 QPSK 1 LOW Pass Band2 10 1855 16QAM 50 LOW Pass Band2 10 1855 16QAM 1 LOW Pass Band2 10 1905 QPSK 50 LOW Pass Band2 10 1905 QPSK 1 HIGH Pass Band2 10 1905 16QAM 50 LOW Pass Band2 10 1905 16QAM 1 HIGH Pass Band2 15 1857.5 QPSK 75 LOW Pass Band2 15 1857.5 QPSK 1 LOW Pass Band2 15 1857.5 16QAM 75 LOW Pass Band2 15 1857.5 16QAM 1 LOW Pass Band2 15 1902.5 QPSK 75 LOW Pass Band2 15 1902.5 QPSK 1 HIGH Pass Band2 15 1902.5 16QAM 75 LOW Pass Band2 15 1902.5 16QAM 1 HIGH Pass Band2 20 1860 QPSK 100 LOW Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 3 of 129 Band2 20 1860 QPSK 1 LOW Pass Band2 20 1860 16QAM 100 LOW Pass Band2 20 1860 16QAM 1 LOW Pass Band2 20 1900 QPSK 100 LOW Pass Band2 20 1900 QPSK 1 HIGH Pass Band2 20 1900 16QAM 100 LOW Pass Band2 20 1900 16QAM 1 HIGH Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 4 of 129 Band2-1.4-1850.7-QPSK-6#LOW@Pass Band2-1.4-1850.7-QPSK-1#LOW@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 5 of 129 Band2-1.4-1850.7-16QAM-6#LOW@Pass Band2-1.4-1850.7-16QAM-1#LOW@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 6 of 129 Band2-1.4-1909.3-QPSK-6#LOW@Pass Band2-1.4-1909.3-QPSK-1#HIGH@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 7 of 129 Band2-1.4-1909.3-16QAM-6#LOW@Pass Band2-1.4-1909.3-16QAM-1#HIGH@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 8 of 129 Band2-3-1851.5-QPSK-15#LOW@Pass Band2-3-1851.5-QPSK-1#LOW@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 9 of 129 Band2-3-1851.5-16QAM-15#LOW@Pass Band2-3-1851.5-16QAM-1#LOW@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 10 of 129 Band2-3-1908.5-QPSK-15#LOW@Pass Band2-3-1908.5-QPSK-1#HIGH@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 11 of 129 Band2-3-1908.5-16QAM-15#LOW@Pass Band2-3-1908.5-16QAM-1#HIGH@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 12 of 129 Band2-5-1852.5-QPSK-25#LOW@Pass Band2-5-1852.5-QPSK-1#LOW@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 13 of 129 Band2-5-1852.5-16QAM-25#LOW@Pass Band2-5-1852.5-16QAM-1#LOW@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 14 of 129 Band2-5-1907.5-QPSK-25#LOW@Pass Band2-5-1907.5-QPSK-1#HIGH@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 15 of 129 Band2-5-1907.5-16QAM-25#LOW@Pass Band2-5-1907.5-16QAM-1#HIGH@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 16 of 129 Band2-10-1855-QPSK-50#LOW@Pass Band2-10-1855-QPSK-1#LOW@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 17 of 129 Band2-10-1855-16QAM-50#LOW@Pass Band2-10-1855-16QAM-1#LOW@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 18 of 129 Band2-10-1905-QPSK-50#LOW@Pass Band2-10-1905-QPSK-1#HIGH@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 19 of 129 Band2-10-1905-16QAM-50#LOW@Pass Band2-10-1905-16QAM-1#HIGH@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 20 of 129 Band2-15-1857.5-QPSK-75#LOW@Pass Band2-15-1857.5-QPSK-1#LOW@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 21 of 129 Band2-15-1857.5-16QAM-75#LOW@Pass Band2-15-1857.5-16QAM-1#LOW@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 Report No.: TZ220102866-E5 Page 22 of 129 Band2-15-1902.5-QPSK-75#LOW@Pass Band2-15-1902.5-QPSK-1#HIGH@Pass Shenzhen Tongzhou Testing Co.,Ltd FCC ID: 2APX7K58 R…

Text truncated - open the document above for the full version.