2AQ68T99B132Unlicensed LTE Small Cell

Hon Lin Technology Co., Ltd. 11F, No.32, Jihu Rd., Neihu Dist., Taipei City 114, Taiwan R.O.C. P R O F E S S I O N A L I N S T A L LA T I O N A T T E S T A T I O N Date: 2020-04-10 FCC ID: 2AQ68T99B132 We, Hon Lin Technology Co., Ltd. hereby declare that requirements of KDB 353028 D01 Antennas Part 15 Transmitters v01 have been met and shown on the following questions. Further we declare that the info listed below are correct and represent the product in consideration under this filing. 1. Professional installation must be justified. Description: Device is Unlicensed LTE Small Cell and must need special trained professional in configuring and installing the product, more details please refer to user manual exhibit. 2. Professional installation does not permit use of any antenna with the transmitter; the permitted types of antenna specified as below. Description: Below listed of Antennas has been compliance FCC Rule Part 15 requirement, more details please refer to test report. The applicant should address the following items when justifying professional installation. (1) To qualify for professional installation, please explain why the hardware is not readily available to average consumer. Description: Due to this product and will not be sold directly to the general public through retail store, therefore the hardware is not readily available to average consumer. (2) Marketing — Applicant must ensure device cannot be sold via retail to the general public or by mail order. Description: This product and will not be sold directly to the general public through retail store. It will be sold to authorized dealers or installers only. Hon Lin Technology Co., Ltd. 11F, No.32, Jihu Rd., Neihu Dist., Taipei City 114, Taiwan R.O.C. (3) Applicant must show that device intended use is not for consumers and general public. Description: Device is for industrial/commercial use. (4) Explain what is unique, sophisticated, complex, or specialized about the equipment that REQUIRES it to be installed by a professional installer? Description: This is device for industrial control and automation equipment, enterprise use only. 3. Other professional installation requirements (1) Installation must be controlled. Description: The product will be distributed through controlled distribution channel which has special trained professional to install this product (2) Installed by licensed professionals. Description: Device sold to dealer who hires installers and need special trained professional in configuring and installing the product. (3) Installation requires special training. Description: The product need special programming, access to keypad, field strength measurements made, so must need special trained professional in configuring and installing the product. If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------- Nancy Lin / Assistant Manager Hon Lin Technology Co., Ltd. TEL:(02) 22656711 FAX: (02) 22656512 E-mail: [email protected]

Hon Lin Technology Co., Ltd. 11F, No.32, Jihu Rd., Neihu Dist., Taipei City 114, Taiwan R.O.C. Date: 2020/03/23 FCC ID: 2AQ68T99B132 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational description Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, Nancy Lin / Assistant Manager Hon Lin Technology Co., Ltd. TEL:(02) 22656711 FAX: (02) 22656512 E-mail: [email protected]

Hon Lin Technology Co., Ltd. 11F, No.32, Jihu Rd., Neihu Dist., Taipei City 114, Taiwan R.O.C. Federal Communications Commission Authorization and Evaluation Division Date: March 30, 2020 Confidentiality Request FCC ID: 2AQ68T99B132 Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Internal Photos Test Setup photos User’s manual Thank you! Sincerely yours, ------------------------------------------------------- Nancy Lin / Assistant Manager Hon Lin Technology Co., Ltd. TEL:(02) 22656711 FAX: (02) 22656512 E-mail: [email protected]

Hon Lin Technology Co., Ltd. 11F, No.32, Jihu Rd., Neihu Dist., Taipei City 114, Taiwan R.O.C. A G E N C Y A U T H O R I Z A T I O N L E T T E R Date: 2020/03/23 FCC ID: 2AQ68T99B132 To whom it may concern: We, the undersigned, hereby authorize Amanda Wu of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, Signature: Nancy Lin / Assistant Manager Hon Lin Technology Co., Ltd. TEL:(02) 22656711 FAX: (02) 22656512 E-mail: [email protected]

Reference No.:190923E06-ExtPho Page 1 / 6 CONSTRUCTION PHOTOS OF EUT Reference No.:190923E06-ExtPho Page 2 / 6 Reference No.:190923E06-ExtPho Page 3 / 6 Reference No.:190923E06-ExtPho Page 4 / 6 Reference No.:190923E06-ExtPho Page 5 / 6 Reference No.:190923E06-ExtPho Page 6 / 6

FCC ID: 2AQ 6 8T99 B132

Reference No.:190923E06-IntPho Page 1 / 12 CONSTRUCTION PHOTOS OF EUT Reference No.:190923E06-IntPho Page 2 / 12 Reference No.:190923E06-IntPho Page 3 / 12 Reference No.:190923E06-IntPho Page 4 / 12 Reference No.:190923E06-IntPho Page 5 / 12 Reference No.:190923E06-IntPho Page 6 / 12 Reference No.:190923E06-IntPho Page 7 / 12 Reference No.:190923E06-IntPho Page 8 / 12 Reference No.:190923E06-IntPho Page 9 / 12 Reference No.:190923E06-IntPho Page 10 / 12 Reference No.:190923E06-IntPho Page 11 / 12 Reference No.:190923E06-IntPho Page 12 / 12

Report No.: SA190923E06A Page No. 1 / 5 Report Format Version: 6.1.1 Reference No.: 200319E01 RF Exposure Report Report No.: RF190923E06A FCC ID: 2AQ68T99B132 Test Model: T99B132 Received Date: Sep. 23, 2019 Test Date: Oct. 16 to 24, 2019 Issued Date: Mar. 27, 2020 Applicant: Hon Lin Technology Co., Ltd Address: 11F., No.32, Jihu Rd., Neihu Dist., Taipei City 11492, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA190923E06A Page No. 2 / 5 Report Format Version: 6.1.1 Reference No.: 200319E01 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE) ............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Calculation Result of Maximum Conducted Power ............................................................................. 5 Report No.: SA190923E06A Page No. 3 / 5 Report Format Version: 6.1.1 Reference No.: 200319E01 Release Control Record Issue No. Description Date Issued SA190923E06A Original release. Mar. 27, 2020 Report No.: SA190923E06A Page No. 4 / 5 Report Format Version: 6.1.1 Reference No.: 200319E01 1 Certificate of Conformity Product: Unlicensed LTE Small Cell Brand: Fii-USA Test Model: T99B132 Sample Status: Mass-Production Applicant: Hon Lin Technology Co., Ltd Test Date: Oct. 16 to 24, 2019 Standards: FCC Part 2 (Section 2.1091) IEEE C95.3 -2002 References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Mar. 27, 2020 Celia Chen / Supervisor Approved by : , Date: Mar. 27, 2020 Rex Lai / Associate Technical Manager Report No.: SA190923E06A Page No. 5 / 5 Report Format Version: 6.1.1 Reference No.: 200319E01 2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Calculation Result of Maximum Conducted Power Frequency Band (MHz) Max Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) 5160-5240 15.63 9.27 20 0.0615 1 5745-5825 23.50 9.27 20 0.3765 1 Note: 1. Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2. Directional Gain = 6.26dBi + 10log (2) = 9.27dBi --- END ---

Report No.: RF190923E06A Page No. 1 / 51 Report Format Version:6.1.2 Reference No.: 190923E06, 200319E01 FCC Test Report Report No.: RF190923E06A FCC ID: 2AQ68T99B132 Test Model: T99B132 Received Date: Sep. 23, 2019 Test Date: Oct. 16 to 24, 2019 Issued Date: Mar. 27, 2020 Applicant: Hon Lin Technology Co., Ltd Address: 11F., No.32, Jihu Rd., Neihu Dist., Taipei City 11492, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF190923E06A Page No. 2 / 51 Report Format Version:6.1.2 Reference No.: 190923E06, 200319E01 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Duty Cycle of Test Signal ................................................................................................................... 11 3.4 Description of Support Units ............................................................................................................. 12 3.4.1 Configuration of System under Test .................................................................................................. 12 3.5 General Description of Applied Standard and References ............................................................... 13 4 Test Types and Results ...................................................................................................................... 14 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 14 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 14 4.1.2 Test Instruments ................................................................................................................................ 15 4.1.3 Test Procedure .................................................................................................................................. 16 4.1.4 Deviation from Test Standard ............................................................................................................ 16 4.1.5 Test Setup .......................................................................................................................................... 17 4.1.6 EUT Operating Condition .................................................................................................................. 18 4.1.7 Test Results ....................................................................................................................................... 19 4.2 Conducted Emission Measurement .................................................................................................. 30 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 30 4.2.2 Test Instruments ................................................................................................................................ 30 4.2.3 Test Procedure ...............................................................................…

Text truncated - open the document above for the full version.

Reference No.: RF190923E06A Page 1 / 5 PHOTOGRAPHS OF THE TEST CONFIGURATION Conducted Emission Test (Mode A) Reference No.: RF190923E06A Page 2 / 5 Conducted Emission Test (Mode B) Reference No.: RF190923E06A Page 3 / 5 Radiated Emission Test (Above 1GHz) (Mode A) Reference No.: RF190923E06A Page 4 / 5 Radiated Emission Test (Below 1GHz) (Mode A) Reference No.: RF190923E06A Page 5 / 5 Radiated Emission Test (Below 1GHz) (Mode B)