2AQIS-POUT-04101HANDS3 PRO DUAL

02 WHAT IS IN THE BOX? 03 INSTRUCTION FOR USE 04 WARNING / CAUTION / NOTICE Do not use or store your device in areas with high concentrations of dust or airborne materials. Dust or foreign materials can cause your device to malfunction and may result in fire or electric shock. Prevent the multipurpose jack and the small end of the charger from contact with conductive materials, such as liquids, dust, metal powders, and pencil leads. Conductive materials may cause a short circuit or corrosion of the terminals, which may result in an explosion or fire. Keep your device dry. Humidity and liquids may damage the parts or electronic circuits in your device. Do not turn on your device if it is wet. Do not drop or cause an impact to the charger or the device. Handle and dispose of the device and charger with care. Never dispose of the device in a fire. Never place the device on or in heating devices, such as microwave ovens, stoves, or radiators. The device may explode when overheated. Follow all local regulations when disposing of used device. Never crush or puncture the device. Do not disassemble, modify, or repair your device. Any changes or modifications to your device can void your manufacturer’s warranty. If your device needs servicing, take your device to a Service Center. Do not use your device with the back cover removed. Doing so may result in damage or malfunction. Do not drop your device or cause impacts to your device. Your device may be damaged or may malfunction. If children use the device, make sure that they use the device properly. Do not use damaged power cords or plugs, or loose electrical sockets. Unsecured connections can cause electric shock or fire. Use manufacturer approved charging cable, accessories, and supplies. Using generic chargers may shorten the life of your device or cause the device to malfunction. They may also cause a fire or cause the battery to explode.If bent or deformed, your device may be damaged or parts may malfunction. Do not touch the device, power cords, plugs, or the electric socket with wet hands or other wet body parts. Doing so may cause electric shock. Do not pull the power cord excessively when disconnecting it. Doing so may cause electric shock or fire. Do not bend or damage the power cord. Doing so may cause electric shock or fire. Do not use your device outdoor during a thunderstorm. Doing so may result in electric shock or device malfunction. Turn off the device in potentially explosive environments. Turn off your device in potentially explosive environments instead of removing the battery. Always comply with regulations, instructions and signs in potentially explosive environments. Do not use your device at refueling points (petrol stations), near fuels or chemicals, or in blasting areas. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or accessories. There may be some events such as wireless charging begins after 4-5 seconds even though your device is positioned on a charging area properly. It is a normal situation that magnetic field is transferring between a charging pad and a mobile device. The device can be used in locations with an ambient temperature of 0°C to 35°C. You can store the device at an ambient temperature of -20°C to 70°C. Using or storing the device outside of the recommended temperature ranges may damage to the device or reduce the battery’s lifespan. FCC INFORMATION TO USER CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. 01 PRODUCT DIAGRAM Model Size Weight Material 1. Connect the included fast charging USB cable to the device. 2. Connect the other side of fast charging USB cable to an available fast charge adapter. To ensuring fast charging, you should use a fast charge adapter (QC2.0 or QC3.0) instead of charging through your computer. 3. Simply place your device on charging area of this fast wireless charger. Wireless charging will begin in seconds. * Examples of Efficient Usage NAME OF PRODUCT Hands3 Pro Dual 2-in-1 Dual Device Wide Space Fast Wireless Charging Mouse Pad POUT-04101 2023.08 MODEL MANUFACTURED PLACE O…

Text truncated - open the document above for the full version.

BROS&COMPANY INC. 1010, Vision IT tower, 677-5, Dongtan-daero, Hwaseong-si, Gyeonggi-do, 18468 South Korea Date: July 19, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AQIS-POUT-04101 US Agent – Attestation Statement / Part 2.911(d)(7) BROS&COMPANY INC. certifies, that as of July 19, 2023, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2AQIS-POUT-04101 BROS&COMPANY INC., accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission- related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of BROS&COMPANY INC. for FCC ID: 2AQIS-POUT-04101 Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: BROS&COMPANY INC. Designated Agent: FCC US Agent, LLC Company Representative: KIYEOL, PARK Designated Agent Representative: Tim Payne Signature: Signature:

BROS&COMPANY INC. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: BROS&COMPANY INC. Address: 1010, Vision IT tower, 677-5, Dongtan-daero, Hwaseong-si, Gyeonggi-do, 18468, South Korea Product Name: KIYEOL, PARK FCC ID: 2AQIS-POUT-04101 Model(s): POUT-04101 2.911(d)(5)(i) Equipment Type We, BROS&COMPANY INC. (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: KIYEOL, PARK Date: August 03, 2023 Title and Company name: CEO / BROS&COMPANY INC. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

BROS&COMPANY INC. 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: BROS&COMPANY INC. Address: 1010, Vision IT tower, 677-5, Dongtan-daero, Hwaseong-si, Gyeonggi-do, 18468, South Korea Product Name: KIYEOL, PARK FCC ID: 2AQIS-POUT-04101 Model(s): POUT-04101 2.911(d)(5)(ii) Applicant filing We, BROS&COMPANY INC. (“the applicant”) certify that, as of the date of the filing of the application, the applicant is is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: KIYEOL, PARK Date: August 03, 2023 Title and Company name: CEO / BROS&COMPANY INC. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

BROS&COMPANY INC. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 03, 2023 Subject; Request for Confidentiality FCC ID: 2AQIS-POUT-04101 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: KIYEOL, PARK Title: CEO

Letter of Authorization Company : BROS&COMPANY INC. Address : 1010, Vision IT tower, 677-5, Dongtan-daero, Hwaseong-si, Gyeonggi-do, 18468, South Korea Product Name : HANDS3 PRO DUAL Model Number : POUT-04101 FCC Identifier : 2AQIS-POUT-04101 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: KIYEOL, PARK Date: August 03, 2023 Title: CEO Signature of applicant:

Page 1 of 6 Page 2 of 6 Page 3 of 6 Page 4 of 6 Page 5 of 6 Page 6 of 6

Page 1 of 1 IDENTIFICATION LABEL: PROPOSED LABEL The shall be permanently affixed in the rear side of the equipment

Page 1 of 9 Page 2 of 9 Page 3 of 9 Page 4 of 9 Page 5 of 9 Page 6 of 9 Coil Antenna 1 Page 7 of 9 Page 8 of 9 Coil Antenna 2 Page 9 of 9

Page 1 of 22 Report No. : OT-237-RWD-005 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMF TEST REPORT Test Report No. : OT-237-RWD-005 Reception No. : 2305001412 Applicant : BROS&COMPANY INC. Address : 1010, Vision IT tower, 677-5, Dongtan-daero, Hwaseong-si, Gyeonggi-do, 18468, South Korea Manufacturer : Shenzhen Boli Technology Co.,Ltd. Address : 201A, A6 Building, Buxin Second Village Industrial Park, 74 Area, Xinan Street, Baoan District, Shenzhen, 518100 Type of Equipment : HANDS3 PRO DUAL FCC ID. : 2AQIS-POUT-04101 Model Name : POUT-04101 Multiple Model Name : N/A Serial number : N/A Total page of Report : 22 pages (including this page) Date of Incoming : June 15, 2023 Date of issue : July 06, 2023 SUMMARY The equipment complies with the regulation; FCC CFR 47 PART 1.1310 This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. This report is not correlated with the "KS Q ISO/IEC 17025 and KOLAS accreditation" of Korean Laboratory Accreditation Scheme. Tested by Yun-Bok, Wi / Prj. Engineer ONETECH Corp. Reviewed by Tae-Ho, Kim / Chief Engineer ONETECH Corp. Approved by Jae-Ho, Lee / Chief Engineer ONETECH Corp. Page 2 of 22 Report No. : OT-237-RWD-005 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE ............................................................................................. 4 2. GENERAL INFORMATION ............................................................................................................ 5 2.1 PRODUCT DESCRIPTION ................................................................................................................................................. 5 2.2 ACCESSORIES DESCRIPTION .......................................................................................................................................... 5 2.3 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT. ................................................................ 5 2.3 MODE OF OPERATION DURING THE TEST ...................................................................................................................... 6 3. EUT MODIFICATIONS .................................................................................................................... 6 4. ENVIRONMENTAL EVALUATION AND EXPOSURE LIMIT ................................................ 7 5. H / E FIELD STRENGTH ................................................................................................................. 9 5.1 EUT OPERATING CONDITION ........................................................................................................................................ 9 5.2 EUT OPERATING CONDITION ........................................................................................................................................ 9 5.3 MEASUREMENT PROCEDURE ......................................................................................................................................... 9 5.4 TEST DATA FOR ANTENNA 1 [DC 5 V] ......................................................................................................................... 10 5.5 TEST DATA FOR ANTENNA 2 [DC 5 V] ......................................................................................................................... 10 5.6 TEST DATA FOR ANTENNA 1 + ANTENNA 2 [DC 5V]................................................................................................... 11 5.7 TEST DATA FOR ANTENNA 1 [DC 9 V] ......................................................................................................................... 11 5.8 TEST DATA FOR ANTENNA 2 [DC 9 V] ......................................................................................................................... 12 5.9 TEST DATA FOR ANTENNA 1 + ANTENNA 2 [DC 9 V] .................................................................................................. 12 5. TEST PHOTO ................................................................................................................................... 13 6. LIST OF TEST EQUIPMENT ........................................................................................................ 22 Page 3 of 22 Report No. : OT-237-RWD-005 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) Revision History Rev. No. Issue Report No. Issued Date Revisions Section Affected 0 OT-237-RWD-005 July 06, 2023 Initial Release All Page 4 of 22 Report No. : OT-237-RWD-005 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) 1. VERIFICATION OF COMPLIANCE APPLICANT : BROS&COMPANY INC. ADDRESS : 1010, Vision IT tower, 677-5, Dongtan-daero, Hwaseong-si, Gyeonggi-do, 18468, South Korea CONTACT PERSON : KIYEOL, PARK / CEO TELEPHONE NO : +82-31-286-8646 FCC ID : 2AQIS-POUT-04101 MODEL NAME : POUT-04101 BRAND NAME : POUT SERIAL NUMBER : N/A DATE : July 06, 2023 EQUIPMENT CLASS DCD – Part 15 Low Power Transmitter Below 1 705 kHz KIND OF EQUIPMENT HANDS3 PRO DUAL THIS REPORT CONCERNS Original Grant MEASUREMENT PROCEDURES ANSI C63.10: 2013 TYPE OF EQUIPMEN…

Text truncated - open the document above for the full version.

Page 1 of 2 - Antenna 1 1. Antenna Type : Coil Antenna 2. Antenna Length : 40 mm 3. Antenna Width : 40 mm 4. Antenna Manufacturer :Shenzhen Boli Technology Co.,Ltd. Page 2 of 2 - Antenna 2 1. Antenna Type : Coil Antenna 2. Antenna Length : 40 mm 3. Antenna Width : 40 mm 4. Antenna Manufacturer :Shenzhen Boli Technology Co.,Ltd.

Page 1 of 69 Report No. : OT-237-RWD-004 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) RADIO PERFORMANCE TEST REPORT Test Report No. : OT-237-RWD-004 Reception No. : 2305001412 Applicant : BROS&COMPANY INC. Address : 1010, Vision IT tower, 677-5, Dongtan-daero, Hwaseong-si, Gyeonggi-do, 18468, South Korea Manufacturer : Shenzhen Boli Technology Co.,Ltd. Address : 201A, A6 Building, Buxin Second Village Industrial Park, 74 Area, Xinan Street, Baoan District, Shenzhen, 518100 Type of Equipment : HANDS3 PRO DUAL FCC ID. : 2AQIS-POUT-04101 Model Name : POUT-04101 Multiple Model Name : N/A Serial number : N/A Total page of Report : 69 pages (including this page) Date of Incoming : June 15, 2023 Date of issue : July 06, 2023 SUMMARY The equipment complies with the regulation; FCC CFR47 Part 15 Subpart C Section 15.207 and 15.209 This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. This report is not correlated with the "KS Q ISO/IEC 17025 and KOLAS accreditation" of Korean Laboratory Accreditation Scheme. Tested by Yun-Bok, Wi / Prj. Engineer ONETECH Corp. Reviewed by Tae-Ho, Kim / Chief Engineer ONETECH Corp. Approved by Jae-Ho, Lee / Chief Engineer ONETECH Corp. Page 2 of 69 Report No. : OT-237-RWD-004 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE ......................................................................................... 5 2. TEST SUMMARY ........................................................................................................................ 6 2.1 TEST ITEMS AND RESULTS ..................................................................................................................................................................... 6 2.2 ADDITIONS, DEVIATIONS, EXCLUSIONS FROM STANDARDS .......................................................................................................... 6 2.3 RELATED SUBMITTAL(S) / GRANT(S) ................................................................................................................................................. 6 2.4 PURPOSE OF THE TEST............................................................................................................................................................................ 6 2.5 TEST METHODOLOGY ............................................................................................................................................................................ 6 2.6 TEST FACILITY ......................................................................................................................................................................................... 6 3. GENERAL INFORMATION ....................................................................................................... 7 3.1 PRODUCT DESCRIPTION ......................................................................................................................................................................... 7 3.2 ACCESSORIES DESCRIPTION ................................................................................................................................................................. 7 3.3 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT. .......................................................................... 7 4. EUT MODIFICATIONS .............................................................................................................. 7 5. SYSTEM TEST CONFIGURATION .......................................................................................... 8 5.1 JUSTIFICATION ......................................................................................................................................................................................... 8 5.2 PERIPHERAL EQUIPMENT ...................................................................................................................................................................... 8 5.3 MODE OF OPERATION DURING THE TEST.......................................................................................................................................... 9 5.4 CONFIGURATION OF TEST SYSTEM ................................................................................................................................................. 10 5.5 ANTENNA REQUIREMENT ................................................................................................................................................................... 10 6. PRELIMINARY TEST ............................................................................................................... 10 6.1 AC POWER LINE CONDUCTED EMISSIONS TESTS ....................................................................................................................... 10 6.2 GENERAL RADIATED EMISSIONS TESTS ........................................................................................................................................ 10 7. SPURIOUS EMISSION TEST ................................................................................................... 11 7.1 REGULATION .......................................................................................................................................................................................... 11 7.2 TEST SET-UP ..................................................................................…

Text truncated - open the document above for the full version.

Page 1 of 2 - CONDUCTED EMISSION TEST Page 2 of 2 - RADIATED EMISSION TEST

Page 1 of 14 - CONDUCTED EMISSION TEST [Antenna 1] [Antenna 2] Page 2 of 14 [Antenna 1 + Antenna 2] Page 3 of 14 - RADIATED EMISSION TEST [Antenna 1] Page 4 of 14 [Antenna 2] Page 5 of 14 [Antenna 1 + Antenna 2] Page 6 of 14 - EMF [Antenna 1] Page 7 of 14 Page 8 of 14 Page 9 of 14 [Antenna 2] Page 10 of 14 Page 11 of 14 Page 12 of 14 [Antenna 1 + Antenna 2] Page 13 of 14 Page 14 of 14