2AQM7-AG31EAsset Gateway Mini

Motive Technologies, Inc. 1355 Market St. Fl. 11, San Francisco CA 94103 United States Of America Tel: 1-847-323-8894 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern, [Motive Technologies, Inc. Grantee Code 2AQM7] (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC Grantee Code. The service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. The applicant acknowledges that they will maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the following agent information changes. Company Name: Motive Technologies, Inc. Company US Address: 1355 Market St. Fl. 11, San Francisco CA 94103 United States Of America Contact Person: Zach Brand Email: [email protected] Telephone number: +1 847 323 8894 FRN: 0027688258 Sincerely yours, Signed by the Applicant Name: Zach Brand Title: VP, Hardware Engineering Email: [email protected] Date: June 30th, 2026 Docusign Envelope ID: C835A0FA-CB63-885E-82D1-D79747C5BDD2

Motive Technologies, Inc. 1355 Market St. Fl. 11, San Francisco CA 94103 United States Of America Tel: 1-847-323-8894 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: June 30th, 2026 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) FCC ID: 2AQM7-AG31E To whom it may concern, Motive Technologies, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not the equipment on the Covered List, as established pursuant to § 1.50002 of CFR Title 47, that is prohibited from obtaining an equipment authorization under this subpart. This includes equipment that: (1) Has been certified as a modular transmitter; or (2) Meets the modular transmitter requirements of § 15.212 of this chapter and could be certified as a modular transmitter. pursuant to section 2.903 resulting the recent adoption of FCC 25-71 (et al., ET Docket No. 21-232, Second Report and Order); or (3) Uncrewed aircraft systems (UAS) and UAS critical components produced in a foreign country and all communications and video surveillance equipment and services listed in Section 1709(a)(1) of the FY25 National Defense Authorization Act (Pub. L. 118-159) Applicant certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Applicant further certifies that no Cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software is installed in the equipment being certified. The above-referenced Covered List is published by the Public Safety and Homeland Security Bureau (PSHSB), pursuant to Section 1.50002 of the Commission’s rules. Sincerely, ________________________ Zach Brand VP, Hardware Engineering [email protected] Docusign Envelope ID: C835A0FA-CB63-885E-82D1-D79747C5BDD2

Motive Technologies, Inc. 1355 Market St. Fl. 11, San Francisco CA 94103 United States Of America Tel: 1-847-323-8894 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: June 30th, 2026 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) FCC ID: 2AQM7-AG31E To whom it may concern, Motive Technologies, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not the equipment on the Covered List, as established pursuant to § 1.50002 of CFR Title 47, that is prohibited from obtaining an equipment authorization under this subpart. This includes equipment that: (1) Has been certified as a modular transmitter; or (2) Meets the modular transmitter requirements of § 15.212 of this chapter and could be certified as a modular transmitter. pursuant to section 2.903 resulting the recent adoption of FCC 25-71 (et al., ET Docket No. 21-232, Second Report and Order); or (3) Uncrewed aircraft systems (UAS) and UAS critical components produced in a foreign country and all communications and video surveillance equipment and services listed in Section 1709(a)(1) of the FY25 National Defense Authorization Act (Pub. L. 118-159) Applicant certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Applicant further certifies that no Cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software is installed in the equipment being certified. The above-referenced Covered List is published by the Public Safety and Homeland Security Bureau (PSHSB), pursuant to Section 1.50002 of the Commission’s rules. Sincerely, ________________________ Zach Brand VP, Hardware Engineering [email protected] Docusign Envelope ID: C835A0FA-CB63-885E-82D1-D79747C5BDD2

ATTESTATION Date: June 30th, 2026 Subject: Special conditions for long-term confidentiality FCC ID: 2AQM7-AG31E, IC Certification No: 24516-AG31E Dear Examiner, We, Motive Technologies, Inc., attest that this device complies with the special conditions set out in the KDB 726920 D01 section II. 3 1. This device is restricted to be used in Motive B2B customer’s site and are not available for general consumers. 2. All sales of the non-consumer device will be under a NDA to include third party sales and that the final user of the device is subject to the NDA. 3. Please refer to the attachment for the example of the NDA between the grantee and a purchaser. Signature: Title / Name (Printed): VP, Hardware Engineering / Zach Brand Docusign Envelope ID: C835A0FA-CB63-885E-82D1-D79747C5BDD2

Motive Technologies, Inc. 1355 Market St. Fl. 11, San Francisco CA 94103 United States Of America Tel: 1-847-323-8894 Date: June 30th, 2026 FCC Laboratory 7435 Oakland Mills Rd Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2AQM7-AG31E To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following documents from public disclosure indefinitely. ● Block diagram ● Schematic Diagram ● Parts List ● Operational Description ● Tune up procedure ● Internal Photos ● User Manual Above mentioned documents which contain detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we are requesting the Commission to withhold the following documents for 180 days after the grant of equipment authorization is issued: ● External Photos ● Test Setup Photos It is our understanding that all measurement test reports, FCC ID label format cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, _______________________ Zach Brand VP, Hardware Engineering [email protected] Docusign Envelope ID: C835A0FA-CB63-885E-82D1-D79747C5BDD2

Motive Technologies, Inc. 1355 Market St. Fl. 11, San Francisco CA 94103 United States Of America Tel: 1-847-323-8894 FCC Agent Authorization Date: June 30th, 2026 To whom it may concern, Motive Technologies, Inc. hereby authorize Sporton International Inc. to act on our behalf in all matters relating to applications for FCC equipment authorization, including the signing of all documents relating to these matters. Any and all acts carried out by Sporton International Inc. on our behalf shall have the same effect as acts of our own. We also hereby certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits that includes FCC benefits pursuant to section 5301 of the Anti-Drug Abuse Act of 1988. 21 U.S.C. 862. This authorization is limited to the product of as following: FCC ID: 2AQM7-AG31E This authorization is valid until further written notice from Motive Technologies, Inc. Sincerely, ________________________ Zach Brand VP, Hardware Engineering [email protected] Docusign Envelope ID: C835A0FA-CB63-885E-82D1-D79747C5BDD2

Motive Technologies, Inc. 1355 Market St. FL. 11, San Francisco, CA 94103 United States TEL: 8473238894, FAX: 4082736497 Date: July 8, 2026 FCC Laboratory 7435 Oakland Mills Rd. Columbia, MD 21046 To whom it may concern: This device with FCC ID: 2AQM7-AG31E integrates a WWAN module: FCC ID Grant Date IOT Module 2ANPO00NRF9160 06/06/2019 09/21/2020 No hardware design changes are made on the modules, and the software has not been changed to increase the RF output power of the modules. Pursuant to KDB 996369 D02, the original modular report as following are submitted to represent the compliance of Part 22/24/27/90 conducted RF testing items of this device. The radiated RF testing items are tested on this host device, and the test report is submitted additionally. Report Number 58741RRF.003 59675RRF.004 59675RRF.003 59675RRF.002 59675RRF.001 64610RRF.004A1 64610RRF.003A2 64610RRF.002A1 64610RRF.001A1 Sincerely, Zach Brand Vice President, Hardware [email protected] Docusign Envelope ID: E3189EA8-652C-8C3F-81B2-911C48B86603

REV. DESCRIPTION ENG.APPROVAL PRIMAXELECTRONIC& TELECOMMUNICATIONPRODUCTSLTD. .Requirement of PRIMAX Part: 1. Comply with PRIMAX QW-5Q002 "Green Product Chemical Substances Specification" 2. Follow customer's specification as required. 3.Follow Halogen- Free requirement : Br<900 ppm, Cl<900 ppm, Br+Cl< 1500 ppm if required. DEVICE LABEL 3 1:1 25mm 10mm NOTE: 廠內根據304013232000-02空 白標簽自行列印 100# 網 格PET MN: SN: ACEA15AF 460001 MN: SN: ACEA15AF 460001 910000592810 910000592810V3 2D barcode scan content: 2025/12/22 2025/12/22 2025/12/22 Eric YU Eric YU Vivian.T AG-31.5 Model number: AG-31.5 AG-31.5 AG-31.5 ECR-219557 ACA1E5 A G WW SSSS SN Rule as below A: AG-31.5A Minor Revision (EVT AT&T) B: AG-31.5V Minor Revision (EVT Vodafone) Serial Number scheme=A Maunfacture Primax=C Location:(C=Dongguan,China;D=Taipei,Taiwan;E=Thailand,TH) Product Code : (A1 common for AG-31.2 / AG-31.3 / AG-31.5) Major revision code: (1=AG31, 2=AG-31.2, 3=AG-31.3, 5=AG-31.5/AG-31.5A/AG-31.5V ) 2 0 2 6 )2 0 2 4 ;F = 2 0 2 5 ;G == 2 0 2 3 ;E= ..EN D = 5 2 ) 1 .........9 9 : Y = Y ERA(B = 2 0 2 1 ;C= 2 0 2 2 ;D (C=EVT,D=DVT,E=PVT,F=MP, G=Rev-B , ) Minor revision code WW=Week(The First Week= 0 1 .... Sequential Serial Number ( EX00 0 3 2 Vivian 2026.2.4 Eric .Yu 2026.2.4 ECR-219768 3 Vivian 2026.3.16 Eric .Yu 2026.3.16 Primax PNProject CodeModel NameMotive Part NumberDescriptionMotive PN 51-212020303KNG02NAG-31.2AG-31.2Asset Gateway Mini830-00000007-001 51-212020305KNG02NAG-31.3AG-31.3Asset Gateway Mini830-00000010-001 NEW PNKNG03NAG-31.5 AG-31.5 Asset Gateway Mini 830-00000011-001 51-212020306KNG03NAG-31.5 AG-31.5AAsset Gateway Mini 830-00000012-001 51-212020307KNG03NAG-31.5 AG-31.5VAsset Gateway Mini 830-00000013-0 01 51-212020308KNG02NAG-31.3 AG-31.3-8PK Asset Gateway Mini830-00000010-001 NEW PNKNG03NAG-31.5 AG-31.5-8PK Asset Gateway Mini830-00000011-001

MOTIVE - FIREFLY AG-31.5 LASER MARKING SCALE 1 :1 LEFT SIDE ■ -- - - - ---- I --- ----a-- - - - ----r- ---- - - - -- Process: Laser Marking Font type: Open Sans Regular Font size: 4pt Font Color: PMS Cool Grey 9C - - I -� � - - - I ;- - - ; ; - - - - - - - - - - - - - - - - - - - - -- - \ : - � ; 1 I ThisdevicecomplieswithPart 15oftheFCCRules.Operationis subjectto the followingtwo ---\ '\ 2.5mm I I accept any interference received, including interference that may cause undesired operation. \ � conditions: (1) This device may not cause harmful interference, and (2) This device must N o M \\, l / �;���� e ��; ��� - 1E 1 ���:��:.��� FT ID: M O M OA G 26 - X X X X X ___ \ '\ \ _ /-. ---� ---r -----------------------------� �------'i ---�- \ � :: � �------�-----== --- I ---- �-= � -- - - - \ RIGHT SIDE / / ,@). \ \ // 0-() ....... \ \ / I / ExtemalCBble:9VOQ300mA)-32VDC(100mA) Lh 5029987 \ /I .&, WARNIN G - EXPLOSION HAZARD. DO Internal Battery Pack: 6VDC, 3. 4 Ah /I I NOT DISCONNECT WHILE THE CIRCUIT Class I, Div 2, G roup A·D Please visit gomotive.com/ag-mini-install \ ;// I IS LIVE OR UNLESS THE AREA IS FREE Temperature Class: T6 for detailed installation guide \ 2.5mm ,vi / �6� G :����� ��%� E �rg-:��· DO ���t:i!������� e Range : CONFOR M S TO UL STD UL 62368-1, UL �21201 1 �- ----- ---------------------------'-' __ C!illtltJ.L= _=_=_=_"""""'"""'"_""'-_-+..,.-_-_-_- _ -_-'-_ _ --------1,- I �-------------------1 _______ 1 CAN ICES/NMB 6mm 3mm 2mm E I p

Enclosureof the device Label Label

TEL : 886-3-327-3456 Page : 1 of 7 FAX : 886-3-328-4978 Issued Date : Jun. 09, 2026 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA641508-01 RF EXPOSURE EVALUATION REPORT FCC ID : 2AQM7-AG31E Equipment : Asset Gateway Mini Brand Name : Motive Model Name : AG-31.5 Marketing Name : Asset Gateway Mini Applicant : Motive Technologies, Inc. 1355 Market St., Fl. 11, San Francisco, CA 94103 Manufacturer : Motive Technologies, Inc. 1355 Market St., Fl. 11, San Francisco, CA 94103 Standard : 47 CFR Part 2.1091 We, SPORTON INTERNATIONAL INC has been evaluated this product in accordance with 47 CFR Part2.1091 and it complies with applicable limit. Sporton Lab is accredited to ISO 17025 by Taiwan Accreditation Foundation (TAF code: 3786) and the FCC designation No. TW3786 under the FCC 2.948(e) by Mutual Recognition Agreement (MRA) in FCC evaluation. The results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Laboratory, the test report shall not be reproduced except in full SPORTON INTERNATIONAL INC. Wensan Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City 333010, Taiwan Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page : 2 of 7 FAX : 886-3-328-4978 Issued Date : Jun. 09, 2026 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA641508-01 Table of Contents 1. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 4 2. MAXIMUM RF AVERAGE OUTPUT POWER AMONG PRODUCTION UNITS ........................................ 5 3. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 6 4. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 7 4.1. Standalone Power Density Calculation ............................................................................................. 7 4.2. Collocated Power Density Calculation ............................................................................................... 7 TEL : 886-3-327-3456 Page : 3 of 7 FAX : 886-3-328-4978 Issued Date : Jun. 09, 2026 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA641508-01 History of this test report Report No. Version Description Issued Date FA641508-01 Rev. 01 Initial issue of report Jun. 09, 2026 TEL : 886-3-327-3456 Page : 4 of 7 FAX : 886-3-328-4978 Issued Date : Jun. 09, 2026 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA641508-01 1. Description of Equipment Under Test (EUT) Product Feature & Specification Equipment Name Asset Gateway Mini Brand Name Motive Model Name AG-31.5 FCC ID 2AQM7-AG31E Wireless Technology and Frequency Range LTE Cat M1 / NB-IoT Band 2: 1850 MHz ~ 1910 MHz LTE Cat M1 / NB-IoT Band 4: 1710 MHz ~ 1755 MHz LTE Cat M1 / NB-IoT Band 5: 824 MHz ~ 849 MHz LTE Cat M1 / NB-IoT Band 12: 699 MHz ~ 716 MHz LTE Cat M1 / NB-IoT Band 13: 777 MHz ~ 787 MHz LTE NB-IoT Band 17: 704 MHz ~ 716 MHz LTE Cat M1 / NB-IoT Band 25: 1850 MHz ~ 1915 MHz LTE Cat M1 / NB-IoT Band 26: 814 MHz ~ 849 MHz LTE Cat M1 / NB-IoT Band 66: 1710 MHz ~ 1780 MHz Bluetooth: 2400 MHz ~ 2483.5 MHz Mode LTE Cat M1: QPSK, 16QAM LTE NB-IoT: QPSK, BPSK Bluetooth LE EUT Stage Identical Prototype Reviewed by: Jason Wang Report Producer: Wan Liu TEL : 886-3-327-3456 Page : 5 of 7 FAX : 886-3-328-4978 Issued Date : Jun. 09, 2026 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA641508-01 2. Maximum RF average output power among production units Mode Maximum Average Power (dBm) LTE Cat M1 / NB IoT Band 2 24 Band 4 24 Band 5 24 Band 12 24 Band 13 24 Band 17 24 Band 25 24 Band 26 24 Band 66 24 Bluetooth LE 8 TEL : 886-3-327-3456 Page : 6 of 7 FAX : 886-3-328-4978 Issued Date : Jun. 09, 2026 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA641508-01 3. RF Exposure Limit Introduction According to ANSI/IEEE C95.1-1992, the criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1310. The MPE was calculated at 20 cm to show compliance with the power density limit. The following formula was used to calculate the Power Density: 퐒= 퐏퐆 ퟒ훑퐑 ퟐ Where: S = Power Density P = Output Power at Antenna Terminals G = Gain of Transmit Antenna (linear gain) R = Distance from Transmitting Antenna TEL : 886-3-327-3456 Page : 7 of 7 FAX : 886-3-328-4978 Issued Date : Jun. 09, 2026 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA641508-01 4. Radio Frequency Radiation Exposure Evaluation 4.1. Standalone Power Density Calculation Band Antenna Gain (dBi) Maximum Power (dBm) Maximum EIRP (dBm) Maximum PG (mW) Power Density at 20cm (mW/cm^2) Limit (mW/cm^2) Power Density / Limit LTE Cat M1 / NB IoT Band 2 2.25 24.00 26.3 421.70 0.084 1.000 0.084 LTE Cat M1 / NB IoT Band 4 1.19 24.00 25.2 330.37 0.066 1.000 0.066 LTE Cat M1 / NB IoT Band 5 0.40 24.00 24.4 275.42 0.055 0.549 0.100 LTE Cat M1 / NB IoT Band 12 1.66 24.00 25.7 368.13 0.073 0.466 0.157 LTE Cat M1 / NB IoT Band 13 1.94 24.00 25.9 392.64 0.078 0.518 0.151 LTE NB IoT Band 17 1.66 24.00 25.7 368.13 0.073 0.469 0.156 LTE Cat M1 / NB IoT Band 25 2.25 24.00 26.3 421.70 0.084 1.000 0.084 LTE Cat M1 / NB IoT Band 26 0.60 24.00 24.6 288.40 0.057 0.543 0.106 LTE Cat M1 / NB IoT Band 66 1.48 24.00 25.5 353.18 0.070 1.000 0.070 Bluetooth 3.01 8.0 11.0 12.62 0.003 1.000 0.003 4.2. Collocated Power Density Calculation LTE Cat M1 / NB IoT Power Density / Limit Bluetooth Power Density / Limit Σ(Power Density / Limit) of LTE Cat M1 / NB IoT + Bluetooth 0.157 0.003 0.160 Note: 1. Σ(Power Density / Limit): This is a summation of [(power density for each transmitter/antenna included in the simultaneous transmission)/ (corresponding MPE limit)], for LTE Cat M1 / NB IoT + Bluetooth. 2. Considering the all transmitter of the …

Text truncated - open the document above for the full version.

AG-31.5 BLE antenna information ●Antenna layout, dimension and picture: oTop layer oBottom layer ●Technical spec: Item spec Dielectric constant 3.9 Impedance 50ohm Frequency 2400MHz-2500MHz Antenna type IFA (printed on PCBA) Antenna Peak Gain 3.01dBi

TEL : 886-3-327-0868 Page Number : 1 of 21 FAX : 886-3-327-0855 Issue Date : Jul. 17, 2026 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR641508-01 FCC RADIO TEST REPORT FCC ID : 2AQM7-AG31E Equipment : Asset Gateway Mini Brand Name : Motive Model Name : AG-31.5 Marketing Name : Asset Gateway Mini Applicant : Motive Technologies, Inc. 1355 Market St., Fl. 11, San Francisco, CA 94103 Manufacturer : Motive Technologies, Inc. 1355 Market St., Fl. 11, San Francisco, CA 94103 Standard : FCC Part 15 Subpart C §15.247 The product was received on Apr. 23, 2026 and testing was performed from May 04, 2026 to Jun. 18, 2026. We, Sporton International Inc. Wensan Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval from Sporton International Inc. Wensan Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu Sporton International Inc. Wensan Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City 333010, Taiwan (R.O.C.) TEL : 886-3-327-0868 Page Number : 2 of 21 FAX : 886-3-327-0855 Issue Date : Jul. 17, 2026 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR641508-01 Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ................................................................................................................................... 5 1.1 Product Feature of Equipment Under Test ........................................................................................ 5 1.2 Modification of EUT ........................................................................................................................... 5 1.3 Testing Location ................................................................................................................................ 5 1.4 Applicable Standards ......................................................................................................................... 5 2 Test Configuration of Equipment Under Test ......................................................................................... 6 2.1 Carrier Frequency Channel ............................................................................................................... 6 2.2 Test Mode .......................................................................................................................................... 7 2.3 Connection Diagram of Test System ................................................................................................. 8 2.4 EUT Operation Test Setup ................................................................................................................ 8 2.5 Measurement Results Explanation Example ..................................................................................... 8 3 Test Result .................................................................................................................................................. 9 3.1 6dB and 99% Bandwidth Measurement ............................................................................................ 9 3.2 Output Power Measurement ............................................................................................................ 10 3.3 Power Spectral Density Measurement ............................................................................................ 11 3.4 Conducted Band Edges and Spurious Emission Measurement ..................................................... 12 3.5 Radiated Band Edges and Spurious Emission Measurement ........................................................ 13 3.6 Antenna Requirements .................................................................................................................... 18 4 List of Measuring Equipment ................................................................................................................. 19 5 Measurement Uncertainty ....................................................................................................................... 21 Appendix A. Conducted Test Results Appendix B. Radiated Spurious Emission Test Result Appendix C. Duty Cycle Plots Appendix D. Setup Photographs TEL : 886-3-327-0868 Page Number : 3 of 21 FAX : 886-3-327-0855 Issue Date : Jul. 17, 2026 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR641508-01 History of this test report Report No. Version Description Issue Date FR641508-01 01 Initial issue of report Jul. 17, 2026 TEL : 886-3-327-0868 Page Number : 4 of 21 FAX : 886-3-327-0855 Issue Date : Jul. 17, 2026 Report Template No.: BU5-FR15CBT4.0 Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR641508-01 Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 3.1 15.247(a)(2) 6dB Bandwidth Pass - 3.1 2.1049 99% Occupied Bandwidth Pass - 3.2 15.247(b)(3) 15.247(b)(4) Output Power Pass - 3.3 15.247(e) Power Spectral Density Pass - 3.4 15.247(d) Conducted Band Edges and Spurious Emission Pass - 3.5 15.247(d) Radiated Band Edges and Spurious Emission Pass - - 15.207 AC Conducted Emission Not Required See Note 3.5.1 15.203 Antenna Requirement Pass - Note: The power source method of the EUT is to use Battery (DC power source), and there is no other AC power port, after assessing, AC Conduction Emission test is not required. Conformi…

Text truncated - open the document above for the full version.