2AQM7-OC1The Motive Omnicam OC-1

AI Omnicam Installation guide Français se trouve au dos. English Failure to properly afix the device to the vehicle can cause the device to detach and result in serious injury. Similarly, bolts, nuts, screws, the mount, and other mechanical components used to afix the device to the vehicle can loosen, break, and fail over time which can also cause the device to detach and result in serious injury. Read and follow all installation and safety instructions provided in the quick start guide and support articles. Regularly inspect the camera, bolts, nuts, screws, the mount, and mechanical components to ensure they are in good working order and remain properly afixed to the vehicle. You are responsible for securing the mount and camera to your vehicle, checking the hardware prior to use, and periodically inspecting the products for adjustment, wear, and damage. If you do not understand all of the instructions and cautions, or if you have no mechanical experience and are not thoroughly familiar with the installation procedures, you should have the product installed by a professional installer. Safety & Privacy The Motive AI Omnicam is a driver and fleet management aid only. It is not a substitute for safe, conscientious driving and cannot compensate for distracted, inatentive, or impaired driving. All warning and alert features provided by Motive products are for informational purposes only. No warning or alert feature provided by Motive products are intended to replace your responsibility to observe all road and driving conditions, abide by all trafic regulations, and use safe driving judgment at all times. Video recordings made by the Motive AI Omnicam are for personal or internal use only. The Motive AI Omnicam uses artificial intelligence to identify animate and inanimate objects in video and images, potentially including individual persons, and the data captured by the AI Omnicam may be used in the creation and production of other Motive products and services. In some jurisdictions it could be considered an invasion of privacy rights to take or publicly display photographs or videos of people or their vehicles using this product or to publish or reproduce such photographs or videos. Further, some jurisdictions may have laws governing the collection, use, storage, and destruction of a person’s biometric information, including face geometry and voiceprint. It is your responsibility to know and comply with applicable laws and rights to privacy in your jurisdiction, including obtaining proper consents and authorizations. TM Covered by patents at patentlist.accessadvance.com Warning Installation instructions AI Omnicam requires a mount kit for installation. Currently, it comes with the AI Omnicam Body Mount.* Download the Motive Fleet App and go to the Devices tab for step by step installation instructions. For more information go to gomotive.com/omnicam-install 1 *More mount kits will be available in the future. Understanding LEDs Solid white The device is recording Flashing white (slow) The device is starting/booting up Flashing white (fast) The device is in error state. For troubleshooting, please check gomotive.com/omnicam-install Common AI Omnicam use cases 2 Support for rear, cargo and passenger use cases coming soon. Motive AI Dashcam or Smart Dashcam is used as the road or driver facing camera. Side (Right & Left)RearCargo Passenger 3 Note Product was validated using suite of reliability tests that were guided by the standards below: ISO-- ISO-- ISO - IEC  IEC -- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the equipment. Increase the separation between the equipment and receiver. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment and RSS 102 RF exposure compliance requirements. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This Transmiter must not be co-located or operating in conjunction with any other antenna or transmiter. Changes or modifications not expressly approved by Motive could void the user's authority to operate this equipment. 4 This device contains license-exempt transmiters / receivers that comply with Part 15 of the FCC Rules and with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Troubleshooting Resources 855-434-3564 [email protected] help.gomotive.com Scan this code or visit gomotive.com/omnicam-install for detailed information and recommendations on installing and assigning your AI Omnicam. 5

55 Hawthorne Street, Floor 4 San Francisco, CA 94105 gomotive.com Letter of Authorization and Anti- Drug Statement Applicant Name: Motive Technologies, Inc. Address: 55 Hawthorn St., Suite 400, San Francisco, CA 94105 Product Name: Omnicam Model Number: OC-1 FCC ID: 2AQM7-OC1 We authorize: CETECOM Inc., to act on our behalf on all matters concerning the above-named equipment. We declare that CETECOM Inc. is allowed to forward all information related to the approval project to the Federal Communications Commission and discuss any issues concerning the approval application. The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. Does the applicant or authorized agent so certify? ☒ Yes I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements. Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application. If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time. Signature of Authorized Person Filing: Title: Director of Compliance Date: June 6, 2023

55 Hawthorne Street, Floor 4 San Francisco, CA 94105 gomotive.com Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 6/8/2023 Attestation Statement according to 2.911(d)(5)(i) and 2.911(d)(5)(ii) FCC ID: 2AQM7-OC1 TO WHOM IT MAY CONCERN: Hereby we certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Further we certify that, as of the date of the filing of the application, Motive Technologies, Inc. is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Daniel Nelson Director of Compliance

55 Hawthorne Street, Floor 4 San Francisco, CA 94105 gomotive.com Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date of filing of the application with TCB: 6-8-2023 Attestation Statement according to 2.911(d)(7) FCC ID: 2AQM7-OC1 TO WHOM IT MAY CONCERN: Motive Technologies, Inc., with FCC Registration Number (FRN) 0027688258, certifies that, as of the date of this filing of the application with the TCB, Motive Technologies, Inc. is our designated US agent for service of process for the above referenced FCC ID. Motive Technologies, Inc. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. Motive Technologies, Inc., with FCC Registration Number (FRN) 0027688258, accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above referenced FCC ID. Sincerely Daniel Nelson Director of Compliance Motive Technologies 55 Hawthorne St., Floor 4 San Francisco, CA 94105 (971)269-4069 [email protected]

Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21048 Date: 6/6/2023 Subject: Request for Permanent Confidentiality FCC ID: 2AQM7-OC1 To Whom It May Concern: In accordance with §0.457(d) and §0.459 of CFR 47, and KDB 726920, Motive Technologies, Inc. hereby requests permanent confidentiality for documents filed under the following exhibit types: 1. Block Diagram 2. Schematic Diagram 3. Part List 4. Operational Description These items contain detailed system and equipment description and related information about the product which Motive Technologies, Inc. considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, Motive Technologies, Inc. also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. We are aware that exhibit types cover letters, attestations, label document, test reports, RF exposure information (SAR and MPE reports), cannot be requested to be classified confidential and are thus subject to publication, as will be documents of all other exhibit types for which we have not requested a confidentiality classification. Best Regards, Name: Daniel A. Nelson Title: Director of Compliance Company Name: Motive Technologies, Inc. Address: 55 Hawthorne St Suite 400 San Francisco, CA 94105

Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21048 Date: 6/6/2023 Subject: Request for Short Term Confidentiality FCC-ID: 2AQM7-OC1 To Whom It May Concern: In accordance with §0.457(d) and §0.459 of CFR 47, Motive Technologies, Inc. hereby requests short term confidentiality for documents filed under the following exhibit types: 1. External Photographs 2. Internal Photographs 3. User / Instruction Manual 4. Test Set-up Photographs until the product will be publicly announced. Short term confidentiality release date / period: 180 days from grant issue date These items contain detailed system and equipment description and related information about the product which Motive Technologies, Inc. Considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, Motive Technologies, Inc. also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. We are informed and aware of our obligation that we have to inform the involved TCB in written and in due time if we intend to market the product prior to the above specified confidentiality release date so that the short term confidentiality classification can be reset prior to product launch. We are aware that exhibit types cover letters, attestations, label document, test reports, RF exposure information (SAR and MPE reports), cannot be requested to be classified confidential and are thus subject to publication, as will be documents of all other exhibit types for which we have not requested a confidentiality classification. Best Regards, Name: Daniel A. Nelson Title: Director of Quality and Compliance Company Name: Motive Technologies, Inc. Address: 55 Hawthorne St Suite 400 San Francisco, CA 94105

REV. DESCRIPTION ENG.APPROVAL 更改說明 修改人審核 SN LABEL 304013360000 304013360000V1.PDF Galileo 2022/11/28 Qiuhua.Lee 1 NOTE: 8.RequirementofPRIMAXPart: 1).ComplywithPRIMAXQW-5Q002GreenProduct ChemicalSubstancesSpecification. 2).Followcustomer'sspecificationasrequired. FollowHalogen-Freerequirement:Br<900ppm,Cl<900ppm, Br+cl<1500ppmifrequired. Productmustbehalogenfree ? ? 3). PRIMAXELECTRONIC& TELECOMMUNICATIONPRODUCTSLTD. Allen.zhao ACCS11CC FF SSSS SSSS=SERIALNUMBER (4 running numbers, 0001....9999) Jiao.Liu ACCS11CC=客户內部定义的年份，每次依PM提供 FF=WEEK,(EXTHEFIRSTWEEK=01,....END=53) 125#透明龍+霧膜 FAI Scan result:MN:OC-1
3. 4. 5.來料不能有毛丝/脏污/刮痕/分層 6.來料黑白点大小不能超过0.1mm/平方米 1 FAI 标签的耐高溫65度，低溫-20度，不能起泡 2022/11/28 2022/11/28 1.材質：125#
PET+霧膜 38.13+/-0.1 2.來料流水碼需連號（連號不能超出訂單的20%,比如：100PCS訂單，來料001~120） 3.000 17.600 Sticker C:
CMR
#108113 M:
Mylar F:
Matte Sticker Text C: Pantone
6c M:
Printed F:
Matte SN:ACCS11CC430001 MN跟SN內容之間必需要有空格 ShenZhenShiGuanBaoAdhesiveProductsCo.,Ltd.Specifications ArticleName Gelatinepaper125#TransparentPET Code HTLT125 Structure → FaceStock → Adhesive → Liner FaceStockLiner ArticleName TFT125(D04) ArticleName LCRPW80HR(6)(C01) ArticleCharacter PETfilmArticleCharacter Gelatinepaper (mm) Thickness 0.100±0.003 (mm) Thickness 0.065±0.005 (g/m2) BasicWeight 140±3 (g/m2) BasicWeight 80±5 Color Transparent Color White Wettingtension ~~ (g/24mm) ReleaseForce 1~8 Adhesive PropertiesValueUnitTestMethod AdhesiveName P20R02~~~~ Thickness 0.025±0.003mmGB-01 DryCoatingWeight 25±3g/m2GB-02 AdhesiontoStainlessSteel 1.1↑kg/24mm GB/T2792-2014 MD AdhesiontoStainlessSteel ~~kg/24mm GB/T2792-2014 MD InitialTack 1↑ ＃ GB/T4852 HoldingPower 24↑hr/kg×inch2GB/T4851 ServiceTemperature -20~100 °C ~~ Min.OperativeTemperature 5°C~~ Condition Avoidhightemperatureandhumidity Optimumstoragecondition：23±1°C，50±5％RH Qualityguaranteeperiod:12months Remark Thetechinicaldataarebasedonthereliableexperimentscarriedbythecompany,whichhoweverarenottoguarantee thosepropertiesandcharactericscompletelyasspecifiedtherein.kindlystudyyourpurposeandconditionstousethis productpreviouslyanddetialuponyourownresponsibility. Date 2020-4-16 Rev.NO.1 深圳市冠宝胶粘制品有限公司 产品说明书 Shen Zhen Shi Guan Bao AdhesiveProducts Co.,Ltd .Specifications 品名 格底100#透明PET Gelatine paper 100# Transparent PET 代号 HTLT100 Article NameCode 产品结构 → 面材 Face Stock Structure→ 胶黏 Adhesive → 底纸 Liner 面材 底纸 Face StockLiner 材料名称 TFT100(D04) 材料名称 LCRPW80HR(6)(C01) Article NameArticle Name 材料性质 聚酯膜材料性质格拉辛底纸 Article CharacterPET filmArticle CharacterGelatine paper 厚度 (mm) 0.100±0.003 厚度 (mm) 0.065±0.005 ThicknessThickness 基重 (g/m 2) 140±3 基重 (g/m2) 80±5 Basic WeightBasic Weight 颜色 透明 Transparent 颜色 白色 ColorColorWhite 表面张力 ~~ 离型力(g/24mm) 1~8 Wetting tensionRelease Force 粘胶 Adhesive 测试项目 标准值 单位 测试方法 PropertiesValueUnitTest Method 胶水名称 P20R02~~~~ Adhesive Name 上胶厚度 0.024±0.003mmGB-01 Thickness 上胶量 24±3g/m 2GB-02 Dry Coating Weight 镜钢粘着力 1.0↑kg/24mm GB/T 2792-2014 Adhesion to Stainless Steel（纵向取样）MD 磨钢粘着力 ~~ kg/24mm GB/T 2792-2014 Adhesion to Stainless Steel（纵向取样）MD 初期力 1↑ ＃GB/T 4852 Initial Tack 保持力 24↑hr/kg×inch 2GB/T 4851 Holding Power 适用温度 -20~100 °C~~ Service Temperature 最低贴标温度 5 °C~~ Min. Operative Temperature 储存条件 避免高温高湿 Avoid high temperature and humidity Condition 最佳储存条件： 23±1 °C， 50±5 ％ RH Optimum storage condition ： 23±1 °C， 50±5 ％ RH 保质期限： 12 个月 Quality guarantee period: 12 months 以上诸项技术资料乃本公司采用公认可靠检验方法，经多次检验所得平均数据。但为确保正确选择与使用本公 司之产品，请你基于欲使用对象，先行对对使用目的与条件作详尽了解与试用，或者通知本公司，以便为你提 供更近一步的说明与服务。 The techinical data are based on the reliable experiments carried by the company,which however are not to guarantee those properties and characterics completely as specified therein.kindly study your purpose and conditions to use this product previously and detial upon your own responsibility. 备注 Remark 修订日期(Date)2020-4-16修订次数(Rev.NO.)第1次(1)

01 - Rear Cover Removed, cable unplugged 02 - LTE board and antenna carrier removed 02b - LTE antenna carrier with LTE Aux highlighted 02c - LTE antenna carrier with LTE Main highlighted 03 - LTE board close-up, front 04 - LTE board close-up, rear 05 - Battery removed from mid-frame 06 - mid-frame removed 07 - Main board close-up without shields, front 08 - Main board close-up without shields, bt_wifi antennas disconnected 09 - Main board removed 10 - Main board close-up without shields, rear 11 - Camera heatsink partly removed 12 - Camera heatsink completely removed 13 - Camera module removed 14 – Camera / IR LED board close-up, front 15 – Camera / IR LED board close-up without shields, rear 16 - Rear and antenna carrier 16b - Rear and antenna carrier. WiFi 1 highlighted 16c - Rear and antenna carrier. WiFi 0 highlighted

RF Exposure Evaluation Report FOR: Motive Technologies, Inc. Brand: Motive Technologies, Inc. Marketing Name: Omnicam Model Number: OC-1 Product Description: Is a vehicle camera, designed to be powered by vehicle power (12 or 24 V DC). It is designed to be always on and recording video while the vehicle is on. It will upload small video files to Motive back-end servers via LTE on request. FCC ID: 2AQM7-OC1 IC: 24516-OC1 Per: CFR Part Part1 (1.1307 &1.1310), Part 2 (2.1091), FCC KDB 447498 D01 General RF Exposure Guidance v06 ISED RSS-102 Issue 5 Report number: EMC_KPTRK_040_23001_FCC_ISED_RF_Exposure DATE: 6/28/2023 A2LA Accredited IC recognized # 3462B CETECOM Inc. 411 Dixon Landing Road  Milpitas, CA 95035  U.S.A. Phone: + 1 (408) 586 6200  Fax: + 1 (408) 586 6299  E-mail: [email protected]  http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2905571 V5.0 2015-10-27 © Copyright by CETECOM Test Report #: EMC_KPTRK_040_23001_FCC_ISED_RF_Exposure FCC ID: 2AQM7-OC1 Date of Report: 6/28/2023 Page 2 of 10 IC: 24516-OC1 Page 2 of 10 TABLE OF CONTENTS 1 Assessment ................................................................................................................................................ 3 2 Administrative Data .................................................................................................................................... 4 2.1 Identification of the Testing Laboratory Issuing the Test Report ......................................... 4 2.2 Identification of the Client / Manufacturer ............................................................................ 4 2.3 Identification of the Manufacturer ......................................................................................... 4 3 Equipment under Assessment .................................................................................................................... 5 4 RF Exposure Limits and FCC and ISED Basic Rules ................................................................................. 7 4.1 FCC ........................................................................................................................................ 7 4.2 ISED RSS 102 ....................................................................................................................... 7 5 Evaluations ................................................................................................................................................. 8 5.1 FCC RF Exposure (Standalone) ............................................................................................ 8 5.2 ISED RF Exposure (Standalone) ........................................................................................... 8 5.3 Multiple RF sources............................................................................................................... 9 6 Revision History ....................................................................................................................................... 10 Test Report #: EMC_KPTRK_040_23001_FCC_ISED_RF_Exposure FCC ID: 2AQM7-OC1 Date of Report: 6/28/2023 Page 3 of 10 IC: 24516-OC1 Page 3 of 10 1 Assessment This RF Exposure evaluation report provides evidence for compliance of the equipment (as identified in section 3 of this test report) with the RF Exposure limits for mobile devices as defined in FCC CFR Part 1 1.1307, Part 2 (2.1091) and ISED standard RSS-102 issue 5 under worst case conditions (measured or rated RF output power including tune-up tolerance, antenna gain, the distance towards the human body, multiple transmitter information as presented by the applicant). In addition, maximum antenna gain or minimum distance towards the human body is calculated respectively, where relevant. The device meets the limits stipulated by the above given FCC and ISED rule parts based on available specifications for worst-case conditions at a separation distance greater than 20cm to the body. Company Description Model # Motive Technologies, Inc. Is a vehicle camera, designed to be powered by vehicle power (12 or 24 V DC). It is designed to be always on and recording video while the vehicle is on. It will upload small video files to Motive back-end servers via LTE on request. OC-1 Responsible for Testing Laboratory: 6/28/2023 Compliance Stoecker, Arndt (Director of Regulatory Services) Date Section Name Signature Responsible for the Report: 6/28/2023 Compliance Ghanma, Issa (Deputy Lab Manager) Date Section Name Signature Test Report #: EMC_KPTRK_040_23001_FCC_ISED_RF_Exposure FCC ID: 2AQM7-OC1 Date of Report: 6/28/2023 Page 4 of 10 IC: 24516-OC1 Page 4 of 10 2 Administrative Data 2.1 Identification of the Testing Laboratory Issuing the Test Report Company Name: CETECOM Inc. Department: Compliance Street Address: 411 Dixon Landing Road City/Zip Code Milpitas, CA 95035 Country USA Telephone: +1 (408) 586 6200 Fax: +1 (408) 586 6299 EMC Lab Manager: Stoecker, Arndt Responsible Project Leader: Quintal, Phillip 2.2 Identification of the Client / Manufacturer Applicant’s Name: Motive Technologies, Inc. Street Address: 55 Hawthorne St., Suite 400 City/Zip Code San Francisco, CA 94105 Country USA 2.3 Identification of the Manufacturer Manufacturer’s Name: Same as Client /----------------- Manufacturers Address: ----------------- City/Zip Code ----------------- Country ----------------- Test Report #: EMC_KPTRK_040_23001_FCC_ISED_RF_Exposure FCC ID: 2AQM7-OC1 Date of Report: 6/28/2023 Page 5 of 10 IC: 24516-OC1 Page 5 of 10 3 Equipment under Assessment Brand: Motive Technologies, Inc. Model No: OC-1 Marketing name: Omnicam FCC-ID : 2AQM7-OC1 IC: 24516-OC1 HW Version : 1 SW Version : 0.7.2 HVIN: OC-1 PMN: Omnicam Product Description: Is a vehicle camera, designed to be powered by vehicle power (12 or 24 V DC). It is designed to be always on and recording video while the vehicle is on. It will upload small video files to Motive back-end servers…

Text truncated - open the document above for the full version.

A2LA Accredited IC recognized # 3462B CETECOM Inc. 411 Dixon Landing Road  Milpitas, CA 95035  U.S.A. Phone: + 1 (408) 586 6200  Fax: + 1 (408) 586 6299  E-mail: [email protected]  http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2905571 © Copyright by CETECOM FCC / ISED Test Report For: Motive Technologies, Inc. Brand: Motive Technologies, Inc. Marketing Name: Omnicam Model #: OC-1 Product Description: Is a vehicle camera, designed to be powered by vehicle power (12 or 24 V DC). It is designed to be always on and recording video while the vehicle is on. It will upload small video files to Motive back-end servers via LTE on request. FCC ID: 2AQM7-OC1 IC ID: 24516-OC1 Applied Rules and Standards: 47 CFR Part 15.407 (UNII) & 5 GHz (UNII) RSS-247 Issue 2 (DTSs) & (LE-LAN), and RSS-Gen Issue 5 REPORT #: EMC_KPTRK_040_23001_FCC_15_407_ISED_UNII3 DATE: 6/28/2023 Test Report #: EMC_KPTRK_040_23001_FCC_15_407_ISED_UNII3 FCC ID: 2AQM7-OC1 Date of Report 6/28/2023 Page 2 of 189 IC: 24516-OC1 TABLE OF CONTENTS 1 ASSESSMENT .............................................................................................................................................................. 3 2 ADMINISTRATIVE DATA .............................................................................................................................................. 4 2.1 IDENTIFICATION OF THE TESTING LABORATORY ISSUING THE EMC TEST REPORT ............................................................................. 4 2.2 IDENTIFICATION OF THE CLIENT ............................................................................................................................................. 4 2.3 IDENTIFICATION OF THE MANUFACTURER ................................................................................................................................ 4 3 EQUIPMENT UNDER TEST (EUT) .................................................................................................................................. 5 3.1 EUT SPECIFICATIONS .......................................................................................................................................................... 5 3.2 EUT SAMPLE DETAILS.......................................................................................................................................................... 6 3.3 ACCESSORY EQUIPMENT (AE) DETAILS.................................................................................................................................... 6 3.4 TEST SAMPLE CONFIGURATION ............................................................................................................................................. 6 3.5 MODE OF OPERATION DETAILS .............................................................................................................................................. 7 3.6 JUSTIFICATION FOR WORST CASE MODE OF OPERATION ............................................................................................................ 8 4 SUBJECT OF INVESTIGATION ....................................................................................................................................... 9 4.1 TEST METHODOLOGY OF APPLIED STANDARDS .......................................................................................................................... 9 5 MEASUREMENT RESULTS SUMMARY ....................................................................................................................... 10 6 MEASUREMENT UNCERTAINTY ................................................................................................................................ 11 6.1 ENVIRONMENTAL CONDITIONS DURING TESTING: ................................................................................................................... 11 6.2 DATES OF TESTING:........................................................................................................................................................... 11 6.3 DECISION RULE: ............................................................................................................................................................... 11 7 MEASUREMENT PROCEDURES .................................................................................................................................. 12 7.1 RADIATED MEASUREMENT ................................................................................................................................................. 12 7.2 RF CONDUCTED MEASUREMENT PROCEDURE ........................................................................................................................ 15 8 TEST RESULT DATA ................................................................................................................................................... 16 8.1 DUTY CYCLE ..................................................................................................................................................................... 16 8.2 MAXIMUM OUTPUT POWER .............................................................................................................................................. 23 8.3 PEAK POWER SPECTRAL DENSITY ......................................................................................................................................... 54 8.4 BAND EDGE COMPLIANCE .....................................…

Text truncated - open the document above for the full version.