2AQRMA56Smart phone

Thanks for choosing Foxx products a nd Date and time Languages and input WEEE Recycling: 7.6 A56 FCC Declaration of Conformity G SM:850/ 900/1800/1900 WCDMA: B2/B4/B5 FDD: B2/B4/B5/B7/B12/B17/25/26/B66/B71 TDD: B41 Foxx Development Inc., 3480 Preston Ridge Road, Suite500, Alpharetta, GA 30005 The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: smart phone (FCC ID: 2AQRMA56 ) has also been tested against this SAR limit. The highest SAR value for this mobile phone tested is 1.268W/kg against the head and 0.491W/kg at 10 mm from the body. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Building 1-5,ZhiRong Industrial Park, TangJing Group, BaiShi Village, QiuChang Street, Huiyang District,Huizhou City China Phenix New Energy (Huizhou) Co., Ltd Band 25: TX:1850-1915MHz Band 26: TX:814-824MHz/ 824-849MHz RX:1930-1995MHz RX:859-869MHz/ 869-894MHz 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

Foxx Development Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date:7/30/2024 FCC ID: 2AQRMA56 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing Foxx Development Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing Foxx Development Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Applicant: Foxx Development Inc. Address: 3480 Preston Ridge Road, Suite500, Alpharetta, GA 30005, USA Contact Person: James Liao Tel.: 858-925-4348 Email: [email protected] Sincerely, Signature:

Attestation Statements 7/30/2024 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (FCC ID:2AQRMA56) Foxx Development Inc., the undersigned, hereby authorize Foxx Development Inc. to act as our designated U.S. agent for service of process, Foxx Development Inc. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Foxx Development Inc. accepts the responsibility to act as designated U.S. agent for service of process. Applicant Information： Company name: Foxx Development Inc. Contact Name: James Liao Address: 3480 Preston Ridge Road, Suite500, Alpharetta, GA 30005, USA Telephone No: 858-925-4348 Email: [email protected] FRN: 0027735299 Signature: James Liao U.S. Agent Information: Company Name:Foxx Development Inc. Address:3480 Preston Ridge Road, Suite500, Alpharetta, GA 30005, USA FRN: 0027735299 Contact Name: James Liao Telephone No: 858-925-4348 Email: [email protected] Signature: James Liao

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Foxx Development Inc. Date：7/30/2024 Product Model Number: A56 FCC ID：2AQRMA56 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. Signature: By: James Liao Contact Listed on FCC Wesbite Title: CTO Email: [email protected] On behalf of: Foxx Development Inc.

Foxx Development Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 30, 2024 Subject; Request for Confidentiality FCC ID: 2AQRMA56 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: James Liao Title: CTO

Page1 ShenzhenhuaxinweiCommunicationTechnologyCo.,LTD 203,BuildingC,5#,SkyworthInnovationValley,Tangtou1 Road,TangtouCommunity,ShiyanStreet,BaoanDistrict, Shenzhen M aterialAcknowledgement Suppliers： ShenzhenhuaxinweiCommunicationTechnologyCo.,LTD S5513-E64D-MAIN-HTCAND Model： S5513-E64D-WGB-HTC ProductName： Ontheantennaassembly Specification s/Models： Antenna trademark： Color： Address： Contact/ Phone： Supplier(withofficialseal) Structural Department R&D Department Quality Department Project Department Customerreview ID Department Structural Department/ Special Project Hardware Department Packaging engineering Quality Department ConfidentialInformation Page2 Specifications ThereportmainlyprovidesA56GSM+WCDMA+LTE,performanceparametertest, antennaforbuilt-inantenna: 2 、Electricalperformance 2-1 SpecificationStandard TheA55antennaoperatesinthe LTEBand2/25:1850-1990MHz LTEBand4:1710-1755MHz LTEBand5/26:814-894MHz LTEBand7:2500-2570MHz LTEBand12:699-716MHz LTEBand17:704-716MHz LTEBand41:2535-2675MHz LTEBand66:1710-1780MHz LTEBand71:663-698MHz,whichgeneratesresonancesinthis;Thefollowingtable showsthemassproductionperformancetestindicatorsfortheA56designantenna: GSM/WCDMA/LTEant65mm*11mm BTWIFIANT13mm*10mm ConfidentialInformation Page3 2-2gaintest ConfidentialInformation Page4 700MHz 824-849MHz ConfidentialInformation Page5 1710-1785MHz 1875MHz ConfidentialInformation Page6 2500-2570 2670 ConfidentialInformation Page6 2-3Activeantennatestdata

Page 1 of 6 Report No.: LGT24G059 Appendix - External Photographs of EUT Constructional Details Model: A56 Photo 1 Photo 2 Page 2 of 6 Report No.: LGT24G059 Photo 3 Photo 4 Page 3 of 6 Report No.: LGT24G059 Photo 5 Photo 6 Page 4 of 6 Report No.: LGT24G059 Photo 7 Photo 8 Page 5 of 6 Report No.: LGT24G059 Photo 9 Photo 10 Page 6 of 6 Report No.: LGT24G059 Photo 11

Label

Page 1 of 8 Report No.: LGT24G059 Appendix - Internal Photographs of EUT Constructional Details Model: A56 Photo 1-SINGLE CARD SLOT Photo 2-DOUBLE CARD SLOT Page 2 of 8 Report No.: LGT24G059 Photo 3 Photo 4 Page 3 of 8 Report No.: LGT24G059 Photo 5 Photo 6 MAIN ANT Page 4 of 8 Report No.: LGT24G059 Photo 7 Photo 8 WI-FI/GPS/BT ANT DIV ANT Page 5 of 8 Report No.: LGT24G059 Photo 9 Photo 10 Page 6 of 8 Report No.: LGT24G059 Photo 11 Photo 12 Page 7 of 8 Report No.: LGT24G059 Photo 13 Photo 14 Page 8 of 8 Report No.: LGT24G059 Photo 15

Page1of209 SARTestReport ReportNo.:AGC14246240701FH01 FCCID: 2AQRMA56 APPLICATIONPURPOSE: OriginalEquipment PRODUCTDESIGNATION: Smartphone BRANDNAME: FOXX MODELNAME: A56 APPLICANT: FoxxDevelopmentInc. DATEOFISSUE: Jul.26,2024 STANDARD(S): IEEEStd.1528:2013 FCC47CFRPart2§2.1093 IEEEStdC95.1™-2005 REPORTVERSION: V1.0 AttestationofGlobalCompliance(Shenzhen)Co.,Ltd. ReportNo.:AGC14246240701FH01 Page 2 of 209 ReportReviseRecord ReportVersionReviseTimeIssuedDateValidVersionNotes V1.0/Jul.26,2024ValidInitialRelease ReportNo.:AGC14246240701FH01 Page 3 of 209 TestReport ApplicantNameFoxxDevelopmentInc. ApplicantAddress3480PrestonRidgeRoad,Suite500,Alpharetta,GA30005，USA ManufacturerNameFoxxDevelopmentInc. ManufacturerAddress3480PrestonRidgeRoad,Suite500,Alpharetta,GA30005，USA FactoryNameN/A FactoryAddressN/A ProductDesignationSmartphone BrandNameFOXX ModelName A56(SIM1andSIM2isachipsetunitandtestedassinglechipset,SIM1is usedtotested.) EUTVoltageDC3.8Vbybattery ApplicableStandard IEEEStd.1528:2013 FCC47CFRPart2§2.1093 IEEEStdC95.1™-2005 DateofreceiptoftestitemJul.12,2024 TestDateJul.12,2024toJul.19,2024 ReportTemplateAGCRT-US-4G/SAR(2021-04-20) Note:Theresultsoftestinginthisreportapplytotheproduct/systemwhichwastestedonly. PreparedBy TheaHuang(ProjectEngineer) Jul.26,2024 ReviewedBy CalvinLiu(Reviewer)Jul.26,2024 ApprovedBy MaxZhang(AuthorizedOfficer) Jul.26,2024 ReportNo.:AGC14246240701FH01 Page 4 of 209 TABLEOFCONTENTS 1.SUMMARYOFMAXIMUMSARVALUE...........................................................................................................5 2.GENERALINFORMATION................................................................................................................................6 2.1.EUTDESCRIPTION..........................................................................................................................................6 3.SARMEASUREMENTSYSTEM.........................................................................................................................8 3.1.THESATIMOSYSTEMUSEDFORPERFORMINGCOMPLIANCETESTSCONSISTSOFFOLLOWINGITEMS..................8 3.2.COMOSARE-FIELDPROBE...........................................................................................................................9 3.3.ROBOT............................................................................................................................................................9 3.4.VIDEOPOSITIONINGSYSTEM.........................................................................................................................10 3.5.DEVICEHOLDER............................................................................................................................................10 3.6.SAMTWINPHANTOM....................................................................................................................................11 4.SARMEASUREMENTPROCEDURE...............................................................................................................12 4.1.SPECIFICABSORPTIONRATE(SAR)...............................................................................................................12 4.2.SARMEASUREMENTPROCEDURE.................................................................................................................13 4.3.RFEXPOSURECONDITIONS...........................................................................................................................15 5.TISSUESIMULATINGLIQUID..........................................................................................................................17 5.1.THECOMPOSITIONOFTHETISSUESIMULATINGLIQUID.....................................................................................17 5.2.TISSUEDIELECTRICPARAMETERSFORHEADANDBODYPHANTOMS...............................................................18 5.3.TISSUECALIBRATIONRESULT.........................................................................................................................19 6.SARSYSTEMCHECKPROCEDURE.............................................................................................................21 6.1.SARSYSTEMCHECKPROCEDURES..............................................................................................................21 6.2.SARSYSTEMCHECK....................................................................................................................................22 7.EUTTESTPOSITION.......................................................................................................................................24 7.1.DEFINETWOIMAGINARYLINESONTHEHANDSET...........................................................................................24 7.2.CHEEKPOSITION...........................................................................................................................................25 7.3.TILTPOSITION...............................................................................................................................................25 7.4.BODYWORNPOSITION..................................................................................................................................26 8.SAREXPOSURELIMITS.................................................................................................................................27 9.TESTFACILITY................................................................................................................................................28 10.TESTEQUIPMENTLIST................................................................................................................................29 11.MEASUREMENTUNCERTAINTY..................................................................................................................30 12.CONDUCTEDPOWERMEASUREMENT......................................................................................................33 13.TESTRESULTS................................…

Text truncated - open the document above for the full version.

ReportNo.:AGC14246240701FH01 Page 146 of 209 TestLaboratory:AGCLabDate:Jul.12,2024 WCDMABand V Mid-Body-TowardsGrounds(RMC) DUT:Smartphone;Type:A56 CommunicationSystem:UMTS;CommunicationSystemBand:BANDVUTRA/FDD;DutyCycle:1:1;Conv.F=1.89; Frequency:836.4MHz;Mediumparametersused:f=835MHz;σ=0.95mho/m;εr=40.66;ρ=1000kg/m³; Phantomsection:FlatSection Ambienttemperature(°C):22.2,Liquidtemperature(°C):21.9 SATIMOConfiguration: •Probe:SSE2;Calibrated:Apr.30,2024;SerialNo.:2023-EPGO-414 •Sensor-Surface:4mm(MechanicalSurfaceDetection) •Phantom:SAMtwinphantom •MeasurementSW:OpenSARV4_02_32 Configuration/WCDMABandVMid-Body-Back/AreaScan:Measurementgrid:dx=8mm,dy=8mm Configuration/WCDMABandVMid-Body-Back/ZoomScan:Measurementgrid:dx=8mm,dy=8mm,dz=5mm; AreaScansurf_sam_plan.txt,h=5.00mm ZoomScan5x5x7,dx=8mmdy=8mmdz=5mm,Complete PhantomValidationplane DevicePositionBodyBack BandWCDMABandV ChannelsMiddle SignalCDMA(Crestfactor:1.0) SURFACESARVOLUMESAR Maximumlocation:X=-2.00,Y=-30.00 SARPeak:0.35W/kg SAR10g(W/Kg)0.198694 SAR1g(W/Kg)0.272986 ReportNo.:AGC14246240701FH01 Page 147 of 209 Z(mm)0.004.009.0014.0019.0024.0029.00 SAR (W/Kg) 0.35080.28160.21370.16360.12370.09330.0704 3DscreenshotHotspotposition ReportNo.:AGC14246240701FH01 Page 148 of 209 TestLaboratory:AGCLabDate:Jul.16,2024 LTEBand2High-Touch-Left(1RB#0) DUT:Smartphone;Type:A56 CommunicationSystem:LTE;CommunicationSystemBand:LTEBand2;DutyCycle:1:1;Conv.F=2.08; Frequency:1900MHz;Mediumparametersused:f=1900MHz;σ=1.39mho/m;εr=39.54;ρ=1000kg/m³; Phantomsection:LeftSection Ambienttemperature(°C):21.3,Liquidtemperature(°C):20.9 SATIMOConfiguration: •Probe:SSE2;Calibrated:Apr.30,2024;SerialNo.:2023-EPGO-414 •Sensor-Surface:4mm(MechanicalSurfaceDetection) •Phantom:SAMtwinphantom •MeasurementSW:OpenSARV4_02_32 Configuration/LTEBand2High-Touch-Left/AreaScan:Measurementgrid:dx=8mm,dy=8mm Configuration/LTEBand2High-Touch-Left/ZoomScan:Measurementgrid:dx=8mm,dy=8mm,dz=5mm; AreaScandx=8mmdy=8mm,h=5.00mm ZoomScan5x5x7,dx=8mmdy=8mmdz=5mm PhantomLefthead DevicePositionCheek BandLTEBand2 ChannelsHigh SignalOFDM(Crestfactor:1.0) SURFACESARVOLUMESAR Maximumlocation:X=-15.00,Y=16.00 SARPeak:2.11W/kg SAR10g(W/Kg)0.589804 SAR1g(W/Kg)1.171095 ReportNo.:AGC14246240701FH01 Page 149 of 209 Z(mm)0.004.009.0014.0019.0024.0029.00 SAR (W/Kg) 2.03981.23340.62570.31630.16020.08660.0436 3DscreenshotHotspotposition ReportNo.:AGC14246240701FH01 Page 150 of 209 TestLaboratory:AGCLabDate:Jul.16,2024 LTEBand2Mid-Body-Back(1RB#0) DUT:Smartphone;Type:A56 CommunicationSystem:LTE;CommunicationSystemBand:LTEBand2;DutyCycle:1:1;Conv.F=2.08; Frequency:1880MHz;Mediumparametersused:f=1900MHz;σ=1.36mho/m;εr=41.73;ρ=1000kg/m³; Phantomsection:FlatSection Ambienttemperature(°C):21.3,Liquidtemperature(°C):20.9 SATIMOConfiguration: •Probe:SSE2;Calibrated:Apr.30,2024;SerialNo.:2023-EPGO-414 •Sensor-Surface:4mm(MechanicalSurfaceDetection) •Phantom:SAMtwinphantom •MeasurementSW:OpenSARV4_02_32 Configuration/LTEBand2Mid-Body-Back/AreaScan:Measurementgrid:dx=8mm,dy=8mm Configuration/LTEBand2Mid-Body-Back/ZoomScan:Measurementgrid:dx=8mm,dy=8mm,dz=5m; AreaScansurf_sam_plan.txt,h=5.00mm ZoomScan5x5x7,dx=8mmdy=8mmdz=5mm PhantomValidationplane DevicePositionBodyBack BandLTEBand2 ChannelsMiddle SignalOFDM(Crestfactor:1.0) SURFACESARVOLUMESAR Maximumlocation:X=9.00,Y=18.00 SARPeak:0.44W/kg SAR10g(W/Kg)0.152586 SAR1g(W/Kg)0.273212 ReportNo.:AGC14246240701FH01 Page 151 of 209 Z(mm)0.004.009.0014.0019.0024.0029.00 SAR (W/Kg) 0.43050.28660.16990.10290.05980.03740.0188 3DscreenshotHotspotposition ReportNo.:AGC14246240701FH01 Page 152 of 209 TestLaboratory:AGCLabDate:Jul.19,2024 LTEBand4Mid-Touch-Left(1RB#0) DUT:Smartphone;Type:A56 CommunicationSystem:LTE;CommunicationSystemBand:LTEBand4;DutyCycle:1:1;Conv.F=2.28; Frequency:1732.5MHz;Mediumparametersused:f=1750MHz;σ=1.36mho/m;εr=40.36;ρ=1000kg/m³; Phantomsection:LeftSection Ambienttemperature(°C):20.1,Liquidtemperature(°C):19.9 SATIMOConfiguration: •Probe:SSE2;Calibrated:Apr.30,2024;SerialNo.:2023-EPGO-414 •Sensor-Surface:4mm(MechanicalSurfaceDetection) •Phantom:SAMtwinphantom •MeasurementSW:OpenSARV4_02_32 Configuration/LTEBand4Mid-Touch-Left/AreaScan:Measurementgrid:dx=8mm,dy=8mm Configuration/LTEBand4Mid-Touch-Left/ZoomScan:Measurementgrid:dx=8mm,dy=8mm,dz=5mm; AreaScandx=8mmdy=8mm,h=5.00mm ZoomScan5x5x7,dx=8mmdy=8mmdz=5mm PhantomLefthead DevicePositionCheek BandLTEBand4 ChannelsMiddle SignalOFDM(Crestfactor:1.0) SURFACESARVOLUMESAR Maximumlocation:X=-19.00,Y=16.00 SARPeak:1.09W/kg SAR10g(W/Kg)0.344344 SAR1g(W/Kg)0.639062 ReportNo.:AGC14246240701FH01 Page 153 of 209 Z(mm)0.004.009.0014.0019.0024.0029.00 SAR (W/Kg) 1.05280.66510.36260.19700.10860.05850.0316 3DscreenshotHotspotposition ReportNo.:AGC14246240701FH01 Page 154 of 209 TestLaboratory:AGCLabDate:Jul.19,2024 LTEBand4Mid-Edge2(Right)(1RB#0) DUT:Smartphone;Type:A56 CommunicationSystem:LTE;CommunicationSystemBand:LTEBand4;DutyCycle:1:1;Conv.F=2.28; Frequency:1732.5MHz;Mediumparametersused:f=1750MHz;σ=1.36mho/m;εr=40.36;ρ=1000kg/m³; Phantomsection:FlatSection Ambienttemperature(°C):20.1,Liquidtemperature(°C):19.9 SATIMOConfiguration: •Probe:SSE2;Calibrated:Apr.30,2024;SerialNo.:2023-EPGO-414 •Sensor-Surface:4mm(MechanicalSurfaceDetection) •Phantom:SAMtwinphantom •MeasurementSW:OpenSARV4_02_32 Configuration/LTEBand4Mid-Edge2(Right)/AreaScan:Measurementgrid:dx=8mm,dy=8mm Configuration/LTEBand4Mid-Edge2(Right)/ZoomScan:Measurementgrid:dx=8mm,dy=8mm,dz=5m; AreaScansurf_sam_plan.txt,h=5.00mm ZoomScan5x5x7,dx=8mmdy=8mmdz=5mm PhantomValidationplane DevicePositionEdge2(Right) BandLTEBand4 ChannelsMiddle SignalOFDM(Crestfactor:1.0) SURFACESARVOLUMESAR Maximumlocation:X=3.00,Y=6.00 SARPeak:0.33W/kg SAR10g(W/Kg)0.103854 SAR1g(W/Kg)0.196599 ReportNo.:AGC14246240701FH01 Page 155 of 209 Z(mm)0.004.009.0014.0019.0024.0029.00 SAR (W/Kg) 0.33110.20750.11180.06230.03400.01910.0106 3DscreenshotHotspotposition ReportNo.:AGC14246240701FH01 Page 156 of 209 TestLaboratory:AGCLabDate:Jul.12,2024 LTEBand5Mid-Touch-Left(1RB#0) DUT:Sma…

Text truncated - open the document above for the full version.

ReportNo.:AGC14246240701FH01 Page 204 of 209 BodyBack10mm BodyFront10mm 10mm ReportNo.:AGC14246240701FH01 Page 205 of 209 Edge1(Top)10mm-HotspotMode Edge2(Right)10mm-HotspotMode ReportNo.:AGC14246240701FH01 Page 206 of 209 Edge3(Bottom)10mm-HotspotMode Edge4(Left)10mm-HotspotMode ReportNo.:AGC14246240701FH01 Page 207 of 209 DEPTHOFTHELIQUIDINTHEPHANTOM—ZOOMIN Note ： ThepositionusedinthemeasurementwereaccordingtoIEEE1528-2013 750MHzhead750MHzbody 835MHzhead835MHzbody 1900MHzhead1900MHzbody ReportNo.:AGC14246240701FH01 Page 208 of 209 1750MHzhead1750MHzbody 2450MHzhead2450MHzbody 2600MHzhead2600MHzbody ReportNo.:AGC14246240701FH01 Page 209 of 209 APPENDIXD.CALIBRATIONDATA RefertoAttachedfiles. ----ENDOFREPORT---- Conditions of Issuance of Test Reports 1. All samples and goods are accepted by the Attestation of Global Compliance (Shenzhen) Co., Ltd (the “Company”) solely for testing and reporting in accordance with the following terms and conditions. The company provides its services on the basis that such terms and conditions constitute express agreement between the company and any person, firm or company requesting its services (the “Clients”). 2. Any report issued by Company as a result of this application for testing services (the “Report”) shall be issued in confidence to the Clients and the Report will be strictly treated as such by the Company. It may not be reproduced either in its entirety or in part and it may not be used for advertising or other unauthorized purposes without the written consent of the Company. The Clients to whom the Report is issued may, however, show or send it, or a certified copy thereof prepared by the Company to its customer, supplier or other persons directly concerned. The Company will not, without the consent of the Clients, enter into any discussion or correspondence with any third party concerning the contents of the Report, unless required by the relevant governmental authorities, laws or court orders. 3.The Company shall not be called or be liable to be called to give evidence or testimony on the Report in a court of law without its prior written consent, unless required by the relevant governmental authorities, laws or court orders. 4. In the event of the improper use of the report as determined by the Company, the Company reserves the right to withdraw it, and to adopt any other additional remedies which may be appropriate. 5. Samples submitted for testing are accepted on the understanding that the Report issued cannot form the basis of, or be the instrument for, any legal action against the Company. 6. The Company will not be liable for or accept responsibility for any loss or damage however arising from the use of information contained in any of its Reports or in any communication whatsoever about its said tests or investigations. 7.Clients wishing to use the Report in court proceedings or arbitration shall inform the Company to that effect prior to submitting the sample for testing. 8. The Company is not responsible for recalling the electronic version of the original report when any revision is made to them. The Client assumes the responsibility to providing the revised version to any interested party who uses them. 9. Subject to the variable length of retention time for test data and report stored hereinto as otherwise specifically required by individual accreditation authorities, the Company will only keep the supporting test data and information of the test report for a period of six years. The data and information will be disposed of after the aforementioned retention period has elapsed. Under no circumstances shall we provide any data and information which has been disposed of after retention period. Under no circumstances shall we be liable for damage of any kind, including (but not limited to) compensatory damages, lost profits, lost data, or any form of special, incidental, indirect, consequential or punitive damages of any kind, whether based on breach of contract of warranty, tort (including negligence), product liability or otherwise, even if we are informed in advance of the possibility of such damages.

The test report is effective only with both signature and specialized stamp. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report only apply to the tested sample. Shenzhen LGT Test Service Co., Ltd. Tel: 0755-89668180 E-mail:[email protected] Web: www.lgt-cert.com Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China RF TEST REPORT Product Name: Smart phone Model Name: A56 FCC ID: 2AQRMA56 Issued For : Foxx Development Inc. 3480 Preston Ridge Road, Suite500, Alpharetta, GA 30005, USA Issued By : Shenzhen LGT Test Service Co., Ltd. Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Report Number: LGT24G059RF04 Sample Received Date: Jul. 10, 2024 Date of Test: Jul. 10, 2024 – Jul. 25, 2024 Date of Issue: Jul. 25, 2024 Report No.: LGT24G059RF04 Page 2 of 83 TEST REPORT CERTIFICATION Applicant: Foxx Development Inc. Address: 3480 Preston Ridge Road, Suite500, Alpharetta, GA 30005, USA Manufacturer: Foxx Development Inc. Address: 3480 Preston Ridge Road, Suite500, Alpharetta, GA 30005, USA Product Name: Smart phone Trademark: FOXX Model Name: A56 Sample Status: Normal APPLICABLE STANDARDS STANDARD TEST RESULTS FCC Part 22H and 24E, 27, 90 KDB 971168 D01 v03r01, ANSI C63.26( 2015) PASS Prepared by: Approved by: Zane Shan Vita Li Engineer Technical Director Report No.: LGT24G059RF04 Page 3 of 83 Table of Contents Page 1 SUMMARY OF TEST RESULTS 5 2 INTRODUCTION 6 2.1 TEST FACTORY 6 2.2 MEASUREMENT UNCERTAINTY 6 3. PRODUCT INFORMATION 7 4 TEST CONFIGURATION OF EQUIPMENT UNDER TEST 8 5 MEASUREMENT INSTRUMENTS 9 6 TEST ITEMS 10 6.1 CONDUCTED OUTPUT POWER 10 6.2 PEAK TO AVERAGE RATIO 11 6.3 TRANSMITTER RADIATED POWER (EIRP/ERP) 12 6.4 OCCUPIED BANDWIDTH 13 6.5 FREQUENCY STABILITY 14 6.6 SPURIOUS EMISSIONS AT ANTENNA TERMINALS 15 6.7 BAND EDGE 16 6.8 FIELD STRENGTH OF SPURIOUS RADIATION MEASUREMENT 17 APPENDIX I. TESTRESULT 19 2G 19 CONDUCTED OUTPUT POWER 19 FREQUENCY STABILITY 20 PEAK-TO-AVERAGE RATIO 23 OCCUPIED BANDWIDTH 30 BAND EDGE 37 OUT-OF-BAND EMISSIONS 42 RADIATED SPURIOUS EMISSION 49 3G 55 CONDUCTED OUTPUT POWER 55 FREQUENCY STABILITY 58 PEAK-TO-AVERAGE RATIO 59 OCCUPIED BANDWIDTH 63 BAND EDGE 67 Report No.: LGT24G059RF04 Page 4 of 83 OUT-OF-BAND EMISSIONS 70 RADIATED SPURIOUS EMISSION 74 APPENDIX II- PHOTOS OF TEST SETUP 83 APPENDIX III - PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS 83 Revision History Rev. Issue Date Contents 00 Jul. 25, 2024 Initial Issue Report No.: LGT24G059RF04 Page 5 of 83 1 SUMMARY OF TEST RESULTS Test procedures according to the technical standards: The radiated emission testing was performed according to the procedures of KDB 971168 D01 v03r01 and ANSI C63.26-2015 FCC Rules Test Description Test Limit Test Result Reference 2.1046 Conducted Output Power Reporting Only PASS 22.913d 24.232d Peak-to-Average Ratio < 13 dB PASS 2.1046 22.913 24.232 27.50 Effective Radiated Power/Equivalent Isotropic Radiated Power < 7 Watts max. ERP(Part 22) < 2 Watts max. EIRP(Part 24) <1 Watts max. EIRP(Part 27) PASS 2.1049 22.917 24.238 27.53 Occupied Bandwidth Reporting Only PASS 2.1055 22.355 24.235 27.54 Frequency Stability < 2.5 ppm (Part 22) Emission must remain in band (Part 24) Emission must remain in band (Part 27) PASS 2.1051 22.917 24.238 27.53 Spurious Emission at Antenna Terminals < 43+10log10(P[Watts]) PASS 2.1053 22.917 24.238 27.53 Field Strength of Spurious Radiation < 43+10log10(P[Watts]) PASS 2.1051 22.917 24.238 27.53 Band Edge < 43+10log10(P[Watts]) PASS Report No.: LGT24G059RF04 Page 6 of 83 2 INTRODUCTION 2.1 TEST FACTORY Company Name: Shenzhen LGT Test Service Co., Ltd. Address: Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Accreditation Certificate A2LA Certificate No.: 6727.01 FCC Registration No.: 746540 CAB ID: CN0136 2.2 MEASUREMENT UNCERTAINTY The measurement uncertainties shown below were calculated in accordance with the requirements of ANSI C63.26. All measurement uncertainty values are shown with a coverage factor of k = 2 toindicate a 95% level of confidence. The measurement dat…

Text truncated - open the document above for the full version.