2AQTM-PS325M13 in 1 Magnetic Wireless Charger & Portable Power Bank

Model No.: PS-325M+PS-325A Thank you for purchasing the XWIN product. Please read this manual carefully before using and keep it for future reference. Package Contents 1* Wireless charger 1* Power Bank 1* Product Manual 1* USB-A to USB-C cable Product icon a）. Power up the PS-325M by the USB-C charging cable. Place the mobile phone(with wireless charging function) on the wireless1 output for wireless charging. （Indicator light is always on when charging） b）. When the PS-325M is adjusted to a certain angle, it can charge the mobile Phone and earphone at the same time.(Indicator light is always on when charging) Use the charging cable connetcting with the built-in USB-C output port and the device, it can achieve charging for the devices. c）. The brackets can be turned out for supporting the wireless charging mobile phones which are without magnetic suction. Instructions 1. How to use 325M 156 mm 70 mm 52 mm 3 in 1 MAGNETIC WIRELESS CHARGER & PORTABLE POWER BANK Wireless Charging IndicatorUSB-C2 Output 12 Portable Power Bank 3 USB-C1 InputPogo Pins Contacts 45 USB-C3 Output/Input 6 Power indicatorsBatton 7 Wireless2 Output 10 8 Wireless1 Output 9 1 2 3 4 5 6 7 8 9 10 Mobile Phone Tablet Earphone Other Electronics U S B - C I n p u t Mobile Phone USB-C Output Earphone Product Parameters Manufacturer：Power System Electronic Technology Co., Ltd. Address：No. 1 Shangbian Road, Puxin Industrial District, Shipai Town, Dongguan City, Guangdong a）. Use the USB-C charging cable to charge the PS-325A. When the four indicator lights are on, it means that the PS-325A is fully charged. a）. Place the PS-325M on the PS-325A, the PS-325A can supply power to the PS-325M through the pogo pins. Devices with wireless charging function can be charged through the wireless charging face on the PS-325M. b）. The PS-325A can be a power bank and provide power for the devices with PD 18W output. c）. Click the button, you can check the current power situation. b）. Insert the charging cable to the USB-C input port of PS-325A, it can charge the PS-325A and supply power to the wireless charging port of PS-325M, to achieve the wireless charging output and other ports output function. c）. When placing PS-325M on the PS-325A, the PS-325A can supply power through the USB-C output port and supply power through pogo pins to PS-325M. Devices can be charged through the PS-325A USB-C output port and the other output ports of PS-325M. 2. How to use PS-325A3. How to use PS-325M+PS-325A Precautions Model No. USB-C1 Input Wireless1 Output Wireless2 Output PS-325M PD 18W(Compatible with QC3.0) USB-C2 Output 5V/1A Total Output15W Max Dimension 90*90*20mm Net Weight452g 5W/7.5W//10W 5W Model No. USB-C3 In/Out Capacity PS-325A PD 18W,5V/3A,9V/2A,12V/1.5A Size 90*90*14mm Net Weight442g 3.7V/5,500mAh/20.35Wh 1. The wireless charging indicator will be off when wireless charging is not working, The indicator will be in white when wireless charging is working, The indicator will be in red at FOD status. 2. When we use PS-325M alone or use PS-325A supply power to PS-325A, the max output of the wireless charge #1 is 10W, and the max output of wireless charge #2 is 5W. 3. When connecting PS-325A with PS-325M, and use PS-325M when charge to the PS-325A, the output of the two wireless charge is 5W. 4. When PS-325A is working for a long time, the Pogo pins will be hot, please do not touch the Pogo pins directly. 5. Please protect the Pogo pins, do not damage, to ensure the function will not be affected. 6. Keep away from liquids. 7. Do not disassemble. 8. Avoid falling. 9. Keep out of reach of children. 10. Keep away from extreme temperatures. Phone Button Power Indicators 25%50%75%100% Mobile Phone Pogo Pins U S B - C I n p u t U S B - C I n p u t This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statements: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Statement: This device has been evaluated to meet general RF exposure requirement. The device must be used in fixed/mobile( equal to or greater than 20cm) exposure condition while the wireless charging.

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Power System Electronic Technology Co., Ltd. Address: No.1 Shangbian Road, Puxin Industrial District,Shipai Town,Dongguan City, Guangdong,China Product Name: 3 in 1 Magnetic Wireless Charger & Portable Power Bank Model Number: PS-325M+325A FCC Identifier: 2AQTM-PS325M1 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Shirley Lam Date: 2/16/2022 Title: Merchandiser Signature of applicant:

C5266091_X10_Ed.1 1/1 Power System Electronic Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2/16/2022 Subject: Request for Confidentiality FCC ID: 2AQTM-PS325M1 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Shirley Lam Title: Merchandiser

FCC ID: 2AQTM-PS325M1 External photo FCC ID: 2AQTM-PS325M1 FCC ID: 2AQTM-PS325M1 FCC ID: 2AQTM-PS325M1 FCC ID: 2AQTM-PS325M1 FCC ID: 2AQTM-PS325M1 FCC ID: 2AQTM-PS325M1

70 mm 100 mm IN OUT 3 in 1 Magnetic Wireless Charger Model No.: PS-325M USB-C1 Input: PD 18W(Compatible with QC3.0) Wireless1 Output: 5W/7.5W/10W Wireless2 Output: 5W USB-C2 Output: 5V 1A Total Output: 15W Max FCC ID: 2AQTM-PS325M1 Made in China 6 mm 23 mm 6.2 mm 40 mm 21 mm 8 mm 49 mm 31 mm 70 mm 100 mm PD 18W IN/OUT 20 mm 3 mm 12 mm 11 mm 5 mm 3 mm Portable Power Bank Model No.: PS-325A USB-C3 Input/Output: PD 18W (5V 3A, 9V 2A, 12V 1.5A) Capacity: 3.7V/5,500mAh/20.35Wh Made in China 34 mm 23 mm

FCC ID: 2AQTM-PS325M1 Internal photo FCC ID: 2AQTM-PS325M1 FCC ID: 2AQTM-PS325M1 RF Coil Antenna A FCC ID: 2AQTM-PS325M1 FCC ID: 2AQTM-PS325M1 RF Coil Antenna B FCC ID: 2AQTM-PS325M1

Report No.: NTC2108555FV00-1 Dongguan Nore Testing Center Co., Ltd. Address: Building D, Gaosheng Science and Technology park, Hongtu road, Nancheng district, Dongguan city, Guangdong province, China Web: www.ntc-c.com Tel:+86-769-2202 2444 Fax:+86-769-2202 2799 Page 1 of 20 RF EVALUATION TEST REPORT Applicant......................... : Power System Electronic Technology Co., Ltd. Address........................... : No.1 Shangbian Road, Puxin Industrial District, Shipai Town, Dongguan City, Guangdong, China Manufacturer.................... : Power System Electronic Technology Co., Ltd. Address........................... : No.1 Shangbian Road, Puxin Industrial District, Shipai Town, Dongguan City, Guangdong, China Factory........................... : Power System Electronic Technology Co., Ltd. Address.......................... : No.1 Shangbian Road, Puxin Industrial District, Shipai Town, Dongguan City, Guangdong, China EUT ............................... : 3 in 1 Magnetic Wireless Charger & Portable Power Bank FCC ID............................ : 2AQTM-PS325M1 Brand Name..................... : N/A Model No. ....................... : PS-325M+325A Measurement Standard....... : 47 CFR PART 2, Section 2.1091& 2.1093 KDB 680106 D01 RF Exposure Wireless Charging App v03r01 Receipt Date of Samples.... : August 27, 2021 Date of Tested.................. : October 28, 2021 to February 11, 2022 Date of Report.................. : February 19, 2022 This report shows that above equipment is technically compliant with the requirements of the standards above. All test results in this report apply only to the tested sample(s). Without prior written approval of Dongguan Nore Testing Center Co., Ltd, this report shall not be reproduced except in full. Prepared by Breeze Jiang / Project Engineer Approved by Iori Fan / Authorized Signatory Report No.: NTC2108555FV00-1 Page 2 of 20 Table of Contents 1. General Description of EUT .............................................................................................................................. 4 2. Test Facility and Location ................................................................................................................................. 6 3. Test Modes Detail ............................................................................................................................................. 7 4. Configuration of EUT ........................................................................................................................................ 8 5. Description of Support Device ........................................................................................................................ 10 6. Deviations and Abnormalities from Standard Conditions ............................................................................... 10 7. Applicable Standards and References ........................................................................................................... 10 8. Equipment approval considerations ............................................................................................................... 11 9. Measurement Uncertainty ............................................................................................................................... 12 10. Maximum Permissible Exposure .................................................................................................................. 13 11. Test Equipment List ...................................................................................................................................... 17 12. Test Photos ................................................................................................................................................... 18 Report No.: NTC2108555FV00-1 Page 3 of 20 Revision History Report Number Description Issued Date NTC2108555FV00-1 Initial Issue 2022-02-19 Report No.: NTC2108555FV00-1 Page 4 of 20 1. General Description of EUT Product Information Product name: 3 in 1 Magnetic Wireless Charger & Portable Power Bank Main Model Name: PS-325M+325A Additional Model Name: N/A Model Difference: N/A S/N: 2108-4790 Brand Name: N/A Hardware version: N/A Software version: N/A Temperature Range: 0 to 40°C (Declared by manufacturer) Rating: PS-325M： USB-C1 Input: PD 18W (Compatible with QC3.0), Wireless 1 Output:5W/7.5W/10W, Wireless 2 Output:5W, USB-C2 Output: DC5V 1A, Total Output: 15W Max PS-325A: USB-C3 Input / Output: PD 18W (DC5V 3A, DC9V 2A, DC12V 1.5A) Capacity: 3.7V/5500mAh/20.35Wh I/O Port: Refer to the User’s Manual Accessories Information Adapter: N/A Cable: N/A Other: N/A Additional information Note: N/A Remark: All the information above are provided by the manufacturer. More detailed feature of the EUT please refers to the user manual. Report No.: NTC2108555FV00-1 Page 5 of 20 Technical Specification Frequency Range: 110.5-205KHz Modulation Type: FSK Antenna Type: Coil Antenna Number of Primary Coil: 2 (Primary Coil A = 5W) (Primary Coil B = 5/7.5/10W) Remark: The information above are provided by the manufacturer. More detailed feature of the EUT please refers to the user manual. Report No.: NTC2108555FV00-1 Page 6 of 20 2. Test Facility and Location Test Site : Dongguan Nore Testing Center Co., Ltd. (Dongguan NTC Co., Ltd.) Accreditations and Authorizations : The Laboratory has been assessed and proved to be in compliance with CNAS/CL01 Listed by CNAS, August 13, 2018 The Certificate Registration Number is L5795. The Certificate is valid until August 13, 2024 The Laboratory has been assessed and proved to be in compliance with ISO17025 Listed by A2LA, November 01, 2017 The Certificate Registration Number is 4429.01 The Certificate is valid until December 31, 2021 Listed by FCC, November 06, 2017 Test Firm Registration Number: 907417 Listed by Industry Canada, June 08, 2017 The Certificate Registration Number. Is 46405-9743A Test Site Location : Building D, Gaosheng Science an…

Text truncated - open the document above for the full version.

Report No.: NTC2108555FV00 Dongguan Nore Testing Center Co., Ltd. Address: Building D, Gaosheng Science and Technology park, Hongtu road, Nancheng district, Dongguan city, Guangdong province, China Web: www.ntc-c.com Tel:+86-769-2202 2444 Fax:+86-769-2202 2799 Page 1 of 30 FCC RADIO TEST REPORT Applicant......................... : Power System Electronic Technology Co., Ltd. Address........................... : No.1 Shangbian Road, Puxin Industrial District, Shipai Town, Dongguan City, Guangdong, China Manufacturer.................... : Power System Electronic Technology Co., Ltd. Address........................... : No.1 Shangbian Road, Puxin Industrial District, Shipai Town, Dongguan City, Guangdong, China Factory............................. : Power System Electronic Technology Co., Ltd. Address........................... : No.1 Shangbian Road, Puxin Industrial District, Shipai Town, Dongguan City, Guangdong, China Product Name................... : 3 in 1 Magnetic Wireless Charger & Portable Power Bank Brand Name...................... : N/A Model No. ........................ : PS-325M+325A FCC ID............................. : 2AQTM-PS325M1 Measurement Standard....... : 47 CFR FCC Part 15, Subpart C Receipt Date of Samples.... : August 27, 2021 Date of Tested.................. : August 27, 2021 to February 11, 2022 Date of Report.................. : February 19, 2022 This report shows that above equipment is technically compliant with the requirements of the standards above. All test results in this report apply only to the tested sample(s). Without prior written approval of Dongguan Nore Testing Center Co., Ltd, this report shall not be reproduced except in full. Prepared by Jenny Liu / Project Engineer Approved by Iori Fan / Authorized Signatory Report No.: NTC2108555FV00 Page 2 of 30 Table of Contents 1. Summary of Test Result ............................................................................................................................................. 4 2. General Description of EUT ........................................................................................................................................ 5 3. Test Channels and Modes Detail ............................................................................................................................... 6 4. Configuration of EUT .................................................................................................................................................. 7 5. Modification of EUT .................................................................................................................................................... 8 6. Description of Support Device .................................................................................................................................... 9 7. Test Facility and Location ........................................................................................................................................... 9 8. Applicable Standards and References ..................................................................................................................... 10 9. Deviations and Abnormalities from Standard Conditions ......................................................................................... 10 10. Test Conditions ....................................................................................................................................................... 10 11. Measurement Uncertainty....................................................................................................................................... 11 12. Sample Calculations ............................................................................................................................................... 12 13. Test Items and Results ........................................................................................................................................... 13 13.1 Conducted Emissions Measurement .................................................................................................................... 13 13.2 Radiated Spurious Emissions and Restricted Bands Measurement .................................................................... 17 13.3 20dB Bandwidth Measurement ............................................................................................................................ 27 13.4 Antenna Requirement ........................................................................................................................................... 29 14. Test Equipment List ................................................................................................................................................ 30 Report No.: NTC2108555FV00 Page 3 of 30 Revision History Report Number Description Issued Date NTC2108555FV00 Initial Issue 2022-02-19 Report No.: NTC2108555FV00 Page 4 of 30 1. Summary of Test Result FCC Rules Description of Test Result Remarks §15.207 (a) AC Power Conducted Emission PASS --- §15.209 Radiated Emissions PASS --- §15.215 20dB Bandwidth PASS --- Report No.: NTC2108555FV00 Page 5 of 30 2. General Description of EUT Product Information Product Name: 3 in 1 Magnetic Wireless Charger & Portable Power Bank Main Model Name: PS-325M+325A Additional Model Name: N/A Model Difference: N/A S/N: 2108-4790 Brand Name: N/A Hardware Version: Not Stated Software Version: Not Stated Rating: PS-325M： USB-C1 Input: PD 18W (Compatible with QC3.0), Wireless 1 Output:5W/7.5W/10W, Wireless 2 Output:5W, USB-C2 Output: DC5V 1A, Total Output: 15W Max PS-325A: USB-C3 Input / Output: PD 18W (DC5V 3A, DC9V 2A, DC12V 1.5A) Capacity: 3.7V/5500mAh/20.35Wh Typical Arrangement: Tabletop I/O Port: Refer to the user manual Accessories Information Adapter: N/A Cable: N/A Other: N/A Additional Information Note: N/A Remark: All the information above are provided by the manufacturer. More d…

Text truncated - open the document above for the full version.

FCC ID: 2AQTM-PS325M Test photos Radiated emission Below 30MHz 30MHz-1GHz FCC ID: 2AQTM-PS325M Conducted emission