2AQURZW39SU-V8Z-Wave Dimmer Plug

Please contact us if you have any questions: [email protected] www.newonetree.com Indoor use in dry location Min brightness level setting( Refer to Parameter 11) Max brightness level setting( Refer to Parameter 12) Features: This parameter can access you to set a timer to make the switch turn off automatically after the switch turns on.The numberentered as value (LED flashes 3 times when the configuration parameter changed.) --- Parameter =4, Size=4, Value: 0-65535(minutes); Value=0(default) disable Auto Turn-Off Timer corresponds to number of minutes. Operation: Set up on the hub. Z-Wave Dimmer Plug (800S) • MP21ZD • Specification Input: 125VAC 60Hz Frequency: 908.42 MHz Dimmable CFL/LED Loading: 200W Incandescent 100W Program button Press 1x: Manually Press 3x: Z-Wave Network configuration Reset: Press the button twice quickly then hold a 3rd press for 10 seconds Blue: Light status indicator Blue: ADD / Inclusion Purple: Remove / Exclusion Red: Network Failure LED indicator Z-WAVE INTEROPERABILITY Adding Device To Z-Wave Network for QR CODE Scan here for SmartStar inclusion Note: FULL DSK can be found on the packaging box. Do not remove or damage them. Parameter Settings LED Indicator This parameter can access you to choose the LED indicator to be on when the plug(light) is on/off, or LED indicator remains on/off all times. (LED flashes 3 times when the configuration parameter changed.) Value=1 --- LED is On when switch (light) is On. --- Parameter =2, size =1byte, Default =0 Value=0 (default) LED is On when switch (light) is Off. Value=2 --- LED is always Off. Value=3 --- LED is always On. SIZE: 235 x 285 mm 47 x 47.5 mm This parameter can access you to set a timer to make the switch turn on automatically after the switch turned on.The numberentered as value corresponds to number of minutes. (LED flashes 3 times when the configuration parameter changed.) --- Parameter =6, Size=4, Value: 0-65535(minutes); Value=0(default) disable turn on the outlet Auto Turn-On Timer Operation: Set up on the hub. This parameter can access you to set a specific brightness for the light when you want to make it as a night light. --- Parameter =7, Size=1, Default = 2 Value=1 --- 10% brightness Value=2 --- 20% brightness Value=10 --- 100% brightness / Night Light Set (LED flashes 3 times when the configuration parameter changed.) This parameter can access you to set the switch to be on/off after power failure. Operation: quickly press 8 times to change this parameter. Parameter=8, Size=1, Value=2(default) Value=0 --- The switch is off regardless of the state prior to power failure. Value=1 --- The switch is on regardless of the state prior to power failure. Value=2(default) memory state before power failure This switch will be return to state prior to the power failure after power is restored. (LED flashes 3 times when the configuration parameter changed.) Operation: quickly press 5 times to change this parameter. (LED flashes 3 times when the configuration parameter changed.) Value=0 --- disable Value=1 / Value=99 ---Parameter=11, Size=1, Default = 10 Value=1 / Value=99 (LED flashes 3 times when the configuration parameter changed.) ---Parameter=12, Size=1, Default =99 Value=0 --- disable Operation: quickly press 10 times to change this parameter. Multilevel minimum value can be set Multilevel maximum value can be set This device complies with part 15 of the FCC and Industry Canada license-exempt RSS standard(s). Operation is subjected to the following two conditions: FCC / IC (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation. FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the — Consult the dealer or an experienced radio / TV technician for help. receiver is connected. CAUTION - PLEASE READ! WARNING MEDICAL EQUIPMENT Please DO NOT use this switch to control Medical or Life Support equipment. Z-Wave devices should never be used to control the On / Off status of Medical and / or Life Support equipment. CONTROLLING APPLIANCES Restores state after power failure Dimmer speed (ON/OFF Control) Dimmer speed (Dimmer Control) Z-Wave Network Configuration (LED flashes twice when the configuration parameter changed.) Support 2 groups, each group max support 5 devices Group 1 lifeline Group 2 Left outlet send basic set. Adding Device To Z-Wave Network smart plug 3 times quickly. 2. Once the controller is ready to add your device, press the Manual/ Program button on the 1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave 1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network. 2. Once the controller is ready to remove your device, press the manual / program button on the smart plug 3 times quickly. The green light is on for 2s when the removal is successful. To Remove The Device Manual: press the button twice quickly then hold a 3rd press for 10 seconds. Host reset: Remove it from hub, the device will be restore to factory default. To Return The Device To Factory Defaults Association Group Note:MP21ZD Support Z-Wave Long Range Z-Wave Long Range device can only support be included via SmartStart.Extract the DSK from end device and paste it into the Dsk Value in PC Controller, make sure the long Range' option is ticked. Z-Wave Long Range If the SmartThings replacement service results in abnormal use of the product, please install a new driver(edge driver) according to the following solutions. Regarding SmartThings usage exceptions: 1. Scan the above QR code(left)to op…

Text truncated - open the document above for the full version.

{NIE-TECH Co., Ltd} { Jinlian commercial center 9001, Jinxiu road No.2, Changan Town,Dongguan City, GuangDongProv., CHINA } Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 {2023-12-27} U.S. Agent Designation { NIE-TECH Co., Ltd} acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2AQURZW39SU- V8): Name and company of U.S. agent: { Jasco Products Company LLC } Physical U.S. address of agent: {10 e memorial road Office oklahoma city OK 73114} FRN of U.S. agent: {0017309360} Email address of U.S. agent: {[email protected]} { Jasco Products Company LLC } acknowledges their obligation to accept service of process on behalf of {NIE- TECH Co., Ltd}. { NIE-TECH Co., Ltd} with the FRN [{0027755610}] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, { } Signature { jianghai} { Nie } { Manager } {NIE-TECH Co., Ltd} {} Signature {Mark Simpkins} {Manager} {Jasco Products Company LLC} 48_[mo del] US_Agent_2.911(d)(7) - U, V0 5

FCC ID: 2AQURZW39SU-V8 FCC ID: 2AQURZW39SU-V8 FCC ID: 2AQURZW39SU-V8

MP21ZD(ZW39SU) (ZW39SU) Model: MP21ZD UL Std. 60730-1 Conforms to Cert. to CSA Std. E60730-1 100W Dimmable CFL/LED Loading: 200W Incandescent Input: 125VAC 60Hz Frequency: 908.42 MHz Made in China For indoor use Z-Wave Dimmer plug (800S) Date: VER: 8.0 FCC ID: 2A QURZW39SU-V8

FCC ID: 2AQURZW39SU-V8 FCC ID: 2AQURZW39SU-V8 FCC ID: 2AQURZW39SU-V8 FCC ID: 2AQURZW39SU-V8 ANT FCC ID: 2AQURZW39SU-V8

ReportNo.:RFI-LAB-RF-202306-FF05-3 QP030-E41 Page1of10 TestingReport CustomerName:NIE-TECHCo.,Ltd ProductName:ZW800_V8.42 SampleModel:ZW800_V8.42ANT ReferenceStandard:GB/T9410-2008;ANSI/IEEEStd149-1979 IssueDate:2023.6.12 Engineer:Date: Auditor:Date: Approver:Date: ReportNo.:RFI-LAB-RF-202306-FF05-3 QP030-E41 Page2of10 Version VersionNo.DateDescriptionFormulateApproval A02023.6.12Forthefirsttime,formulateZkrisEason Contents 1.GeneralInformation.........................................................................................................................3 1.1Generalinformationoftestinginstitutions...........................................................................3 1.2Testingprinciple...................................................................................................................3 1.3Testequipment......................................................................................................................4 1.4Testenvironment...................................................................................................................4 1.5Statement..............................................................................................................................4 2.SampleInformation.........................................................................................................................5 2.1Clientinformation.................................................................................................................5 2.2DescriptionofEUT(S)..........................................................................................................5 2.3EUTappearance....................................................................................................................6 2.4EUTsetupphotooffreespaceOTAtesting.........................................................................6 3.TestResults.....................................................................................................................................7 3.1Teststandard.........................................................................................................................7 3.2Testuncertainty.....................................................................................................................7 3.3Testdata................................................................................................................................8 3.3.1VSWRparameters.....................................................................................................8 3.3.2VSWRdata................................................................................................................8 3.3.3Typicalfreespaceefficiencyandgain......................................................................8 3.3.4Typicalfreespaceradiationpattern...........................................................................9 （Thefollowingisblank）..............................................................................................................10 ReportNo.:RFI-LAB-RF-202306-FF05-3 QP030-E41 Page3of10 1.GeneralInformation 1.1Generalinformationoftestinginstitutions Name ShenzhenRFI-LABCommunicationTechnologyCo.,Ltd. Address 10/FA,LingyunBld,LiufangRd,BaoanDistrict,SZ Tel 13682621346 E-mail [email protected] Equipment AlltheequipmentusedinthereportisfixedinZoneB,WestSideof1/F,Building1, TingweiIndustrialPark,No.6LiufangRoad,Bao'anDistrict,Shenzhen 1.2Testingprinciple ReportNo.:RFI-LAB-RF-202306-FF05-3 QP030-E41 Page4of10 1.3Testequipment EquipmentModelNo.SerialNo.Manufacturer Calibration date Next calibration date OTATest System RayZone-5000 RFI-LAB-RF -D00 GTS2023.3.142025.3.13 Network Analyzer E5071C RFI-LAB-RF -D01 KEYSIGHT2023.5.112024.5.10 Network Analyzer E5071C RFI-LAB-RF -C02 KEYSIGHT2023.5.112024.5.10 1.4Testenvironment Temperature 24.2°C Humidity 59%RH Pressure 100.15kPa 1.5Statement (1)Thetestresultsinthereportareonlyapplicabletothetestedsamplesandthetestedsamples workundertheenvironmentdescribedinthereport. (2)OnlyShenzhenRFI-LABCommunicationTechnologyCo.,Ltd.havetherighttomodifythe report,andthemodificationinformationshallbeannotatedintherevisionform. (3)Anyobjectiontothisreportshallberaisedwithin30daysafterformalconfirmationofthe report. (4)Thisreportisinvalidifthereisanyevidencethatthesampleinformationprovidedisfalsified. (5)Thereportisinvalidwithoutthesignatureoftheauditorandapprover. ReportNo.:RFI-LAB-RF-202306-FF05-3 QP030-E41 Page5of10 2.SampleInformation 2.1Clientinformation Name NIE-TECHCo.,Ltd Address / Contacts / Tel / E-mail / Manufacturer / 2.2DescriptionofEUT(S) ProductName ZW800_V8.42 SampleModel ZW800_V8.42ANT AntennaSize / SerialNo. / AntennaType PCBAntenna TestItem VSWR;Antennagain;Efficiency;Radiationpattern FrequencyRange 902-928MHz ReceivedDate 2023.6.08 TestDate 2023.6.09 Remark ThelengthoftheRFcableis50mm ReportNo.:RFI-LAB-RF-202306-FF05-3 QP030-E41 Page6of10 2.3EUTappearance 2.4EUTsetupphotooffreespaceOTAtesting Planform Frontview ReportNo.:RFI-LAB-RF-202306-FF05-3 QP030-E41 Page7of10 3.TestResults 3.1Teststandard NameParameterMethodStandardno. Mobile communication antenna Antennagain Genericspecification forantennasusedinthe mobilecommunications GB/T 9410-2008 Radiationpattern VSWR Antenna Radiationefficiency IEEEStandardTest ProceduresforAntennas ANSI/IEEEStd 149-1979 Gainanddirectivity 3.2Testuncertainty TheuncertaintywascalculatedonthebasisoftheGUMpublishedbyISO,usingthe inclusionfactorofK=2andthe95%confidenceleveltoexpresstheextended uncertainty. ItemUncertainty VSWR±0.3 Antennagain±0.72dB Radiationefficiency±0.72dB ReportNo.:RFI-LAB-RF-202306-FF05-3 QP030-E41 Page8of10 3.3Testdata 3.3.1VSWRparameters 3.3.2VSWRdata 3.3.3Typicalfreespaceefficiencyandgain Frequency/MHz 902915928 VSWR 6.44816.50926.5622 Frequency/MHz 902904906908910912914916918920922924926928 PeakGain/dBi -7.64-7.43-7.29-7.16-7.05-6.91-6.77-6.61-6.48-6.36-6.26-6.21-6.21-6.16 Efficiency/% 6.046.196.286.376.526.696.897.067.257…

Text truncated - open the document above for the full version.

FCC TEST REPORT FCC ID: 2AQURZW39SU-V8 Product Name : Z-Wave Dimmer Plug Model Name : ZW39SU, MP21ZD Brand Name : Ministon Report No. : PTC23120112103E-FC01 Prepared for NIE-TECH Co., Ltd Jinlian commercial center 9001, Jinxiu road No.2, Changan Town,Dongguan City, GuangDongProv., CHINA Prepared by Precise Testing & Certification Co., Ltd. Building 1, No. 6, Tongxin Road, Dongcheng Street, Dongguan, Guangdong, China Report No.: PTC23120112103E-FC01 Page 2 of 38 1 TEST RESULT CERTIFICATION Applicant’s name : NIE-TECH Co., Ltd Address : Jinlian commercial center 9001, Jinxiu road No.2, Changan Town,Dongguan City, GuangDongProv., CHINA Manufacture's name : NIE-TECH Co., Ltd Address : Jinlian commercial center 9001, Jinxiu road No.2, Changan Town,Dongguan City, GuangDongProv., CHINA Product name : Z-Wave Dimmer Plug Model name : ZW39SU, MP21ZD Standards : FCC Part15 Subpart C, Paragraph 15.249 Test procedure : ANSI C63.10: 2013 Test Date : Dec. 11, 2023 to Dec. 26, 2023 Date of Issue : Dec. 27, 2023 Test Result : Pass This device described above has been tested by PTC, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of PTC, this document may be altered or revised by PTC, personal only, and shall be noted in the revision of the document. Test Engineer: Jack zhou / Engineer Technical Manager: Simon Pu / Manager Report No.: PTC23120112103E-FC01 Page 3 of 38 Contents Page 1 TEST RESULT CERTIFICATION .............................................................................................................................. 2 2 TEST SUMMARY ......................................................................................................................................................... 4 3 TEST FACILITY ............................................................................................................................................................ 5 4 GENERAL INFORMATION ........................................................................................................................................ 6 4.1 GENERAL DESCRIPTION OF E.U.T. .................................................................................................................... 6 4.2 TEST MODE ........................................................................................................................................................ 7 4.3 LIST OF CHANNELS ............................................................................................................................................. 8 5 EQUIPMENT DURING TEST ..................................................................................................................................... 9 5.1 EQUIPMENTS LIST............................................................................................................................................... 9 5.2 MEASUREMENT UNCERTAINTY ......................................................................................................................... 11 5.3 DESCRIPTION OF SUPPORT UNITS ................................................................................................................... 12 6 TEST STANDARD AND LIMIT ............................................................................................................................... 13 6.1. TEST SETUP .................................................................................................................................................... 13 6.2. TEST PROCEDURE ........................................................................................................................................... 13 6.3. TEST DATA ...................................................................................................................................................... 14 7 . RADIATED EMISSION AND BAND EDGE ......................................................................................................... 16 7.1. TEST STANDARD AND LIMIT ............................................................................................................................ 16 7.2. TEST SETUP .................................................................................................................................................... 17 7.3. TEST PROCEDURE ........................................................................................................................................... 18 7.4. TEST DATA ...................................................................................................................................................... 19 8. 20DB BANDWIDTH TEST ....................................................................................................................................... 22 8.1. TEST STANDARD AND LIMIT ............................................................................................................................ 26 8.2. TEST SETUP .................................................................................................................................................... 26 8.3. TEST PROCEDURE ........................................................................................................................................... 26 8.4. TEST DATA ...................................................................................................................................................... 26 9. ANTENNA REQUIREMENT .................................................................................................................................... 27 9.1. TEST STANDARD AND REQUIREMENT ............................................................................................................. 28 9.2. ANTENNA CONNECTED CONSTRUCTION…

Text truncated - open the document above for the full version.

FCC ID: 2AQURZW39SU-V8 Conducted Emissions Radiated Spurious Emissions From 30MHz-1000MHz FCC ID: 2AQURZW39SU-V8 Test frequency from Above 1GHz