2AR3E-LNTW1LINKLIKE Halo

FCC RF Radiation Exposure Statement: 1.This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2.This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.

Linklike (Shenzhen) Technology Co., Ltd. Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Linklike (Shenzhen) Technology Co., Ltd. Address: RM1709, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China Product Name: LINKLIKE Halo FCC ID: 2AR3E-LNTW1 Model(s): LNTW1 2.911(d)(5)(i) Equipment Type We, [Linklike (Shenzhen) Technology Co., Ltd. ] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Earl Zhu Date: 2024-01-08 Title and Company name: Compliance Engineer NOTE 1 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Linklike (Shenzhen) Technology Co., Ltd. Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Linklike (Shenzhen) Technology Co., Ltd. Address: RM1709, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China Product Name: LINKLIKE Halo FCC ID: 2AR3E-LNTW1 Model(s): LNTW1 2.911(d)(5)(ii) Applicant filing We, [Linklike (Shenzhen) Technology Co., Ltd. ] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Earl Zhu Date: 2024-01-08 Title and Company name: Compliance Engineer NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.2

Linklike (Shenzhen) Technology Co., Ltd. 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: Linklike (Shenzhen) Technology Co., Ltd. Address: RM1709, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China Product Name: LINKLIKE Halo FCC ID: 2AR3E-LNTW1 Model(s): LNTW1 2.911(d)(7) USA Designated Agent for Service of Process We, [Linklike (Shenzhen) Technology Co., Ltd. ] (“the applicant”) designate [THREE STONES MEDIA LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: THREE STONES MEDIA LLC Address: 1200 Broadway St. APT 329, Los Angeles, CA90015 FRN: 0033401761 Contact Name: Sijie Zhang Telephone No: +1 267 909 3692 Email: [email protected] Applicant Company name: Linklike (Shenzhen) Technology Co., Ltd. Address: RM1709, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China FRN: 0028070993 FCC Grantee Code: 2AR3E Contact Name: Earl Zhu Telephone No: 8615019224926 Email: [email protected] Signature: Signature: Linklike (Shenzhen) Technology Co., Ltd. 2.911 (d)(7)USA Agent v1.2 Title: Manager Title: Compliance Engineer Date: 2024-01-08 Date: 2024-01-08 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threat s-to-the-communications-supply-chain-through-the

Linklike (Shenzhen) Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-01-08 Subject; Request for Long Term Confidentiality FCC ID: 2AR3E-LNTW1 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Earl Zhu Title: Compliance Engineer

Letter of Authorization Company: Linklike (Shenzhen) Technology Co., Ltd. Address: RM1709, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China Product Name: LINKLIKE Halo Model Number: LNTW1 FCC Identifier: 2AR3E-LNTW1 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Earl Zhu Date: 2024-0 1-08 Title: Compliance Engineer

Model: LNTW1 External Model: LNTW1 Model: LNTW1 Model: LNTW1 Model: LNTW1 Model: LNTW1

Label&Location FCC ID: 2AR3E-LNTW1

Model: LNTW1 Internal Model: LNTW1 Model: LNTW1 Model: LNTW1 Model: LNTW1 Model: LNTW1

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Exposure Report For Applicant Name: Linklike (Shenzhen) Technology Co., Ltd. Address: RM1709, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China EUT Name: LINKLIKE Halo Brand Name: LINKLIKE Model Number: LNTW1 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF231213R00105 Test Standards: 47 CFR Part 2 Subpart J Section 2.1093 FCC ID: 2AR3E-LNTW1 Test Conclusion: Pass Test Date: 2023-12-04 to 2024-01-05 Date of Issue: 2024-01-07 Prepared By: Gavin Cui / Project Engineer Date: 2024-01-07 Approved By: Ryan.CJ / EMC Manager Date: 2024-01-07 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF231213R00105 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2024-01-07 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF231213R00105 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1. Introduction ............................................................................................................................................................................................ 4 1.1 Identification of Testing Laboratory ................................................................................................................................. 4 1.2 Identification of the Responsible Testing Location ...................................................................................................... 4 1.3 Laboratory Condition ........................................................................................................................................................... 4 1.4 Announcement ....................................................................................................................................................................... 4 2. Product Information .............................................................................................................................................................................. 5 2.1 Application Information ....................................................................................................................................................... 5 2.2 Manufacturer Information .................................................................................................................................................... 5 2.3 Factory Information .............................................................................................................................................................. 5 2.4 General Description of Equipment under Test (EUT)................................................................................................... 5 3. Test Requirement ................................................................................................................................................................................. 6 3.1 Assessment Result ............................................................................................................................................................... 6 Test Report Number: BTF231213R00105 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 4 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 1. Introduction 1.1 Identification of Testing Laboratory Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Phone Number: +86-0755-23146130 Fax Number: +86-0755-23146130 1.2 Identification of the Responsible Testing Location Test Location: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Description: All measurement facilities used to collect the measurement data are located at F101,201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China FCC Registration Number: 518915 Designation Number: CN1330 1.3 Laboratory Condition Ambient Temperature: 20°C to 25°C Ambient Relative Humidity: 45% to 55% Ambient Pressure: 100 kPa to 102 kPa 1.4 Announcement (1) The test report reference to the report template version v0. (2) The test report is invalid if not marked with the signatures of the persons responsible for preparing, reviewing and approving the test report. (3) The test report is invalid if there…

Text truncated - open the document above for the full version.

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 106 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Test Report For Applicant Name: Linklike (Shenzhen) Technology Co., Ltd. Address: RM1709, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China EUT Name: LINKLIKE Halo Brand Name: LINKLIKE Model Number: LNTW1 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF231213R00101 Test Standards: 47 CFR Part 15.247 FCC ID: 2AR3E-LNTW1 Test Conclusion: Pass Test Date: 2023-12-04 to 2024-01-05 Date of Issue: 2024-01-07 Prepared By: Gavin Cui / Project Engineer Date: 2024-01-07 Approved By: Ryan.CJ / EMC Manager Date: 2024-01-07 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF231213R00101 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 106 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2024-01-07 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF231213R00101 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 106 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1 INTRODUCTION ..........................................................................................................................................5 1.1 Identification of Testing Laboratory ...............................................................................................5 1.2 Identification of the Responsible Testing Location ......................................................................5 1.3 Announcement .................................................................................................................................5 2 PRODUCT INFORMATION ..........................................................................................................................6 2.1 Application Information ...................................................................................................................6 2.2 Manufacturer Information ................................................................................................................6 2.3 Factory Information .........................................................................................................................6 2.4 General Description of Equipment under Test (EUT) ...................................................................6 2.5 Technical Information ......................................................................................................................6 3 SUMMARY OF TEST RESULTS .................................................................................................................7 3.1 Test Standards ..................................................................................................................................7 3.2 Uncertainty of Test ...........................................................................................................................7 3.3 Summary of Test Result ..................................................................................................................7 4 TEST CONFIGURATION .............................................................................................................................8 4.1 Test Equipment List .........................................................................................................................8 4.2 Test Auxiliary Equipment ............................................................................................................. 10 4.3 Test Modes ..................................................................................................................................... 10 5 EVALUATION RESULTS (EVALUATION) ................................................................................................. 11 5.1 Antenna requirement ..................................................................................................................... 11 6 RADIO SPECTRUM MATTER TEST RESULTS (RF) .............................................................................. 12 6.1 Conducted Emission at AC power line ....................................................................................... 12 6.1.1 E.U.T. Operation: ................................................................................................................. 12 6.1.2 Test Setup Diagram: ............................................................................................................ 12 6.1.3 Test Data: ............................................................................................................................ 13 6.2 Occupied Bandwidth .................................................................................................................... 15 6.2.1 E.U.T. Operation: ..........................................................…

Text truncated - open the document above for the full version.

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 106 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Test Report For Applicant Name: Linklike (Shenzhen) Technology Co., Ltd. Address: RM1709, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China EUT Name: LINKLIKE Halo Brand Name: LINKLIKE Model Number: LNTW1 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF231213R00103 Test Standards: 47 CFR Part 15.247 FCC ID: 2AR3E-LNTW1 Test Conclusion: Pass Test Date: 2023-12-04 to 2024-01-05 Date of Issue: 2024-01-07 Prepared By: Gavin Cui / Project Engineer Date: 2024-01-07 Approved By: Ryan.CJ / EMC Manager Date: 2024-01-07 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF231213R00103 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 106 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2024-01-07 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF231213R00103 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 106 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1 INTRODUCTION ..........................................................................................................................................5 1.1 Identification of Testing Laboratory ...............................................................................................5 1.2 Identification of the Responsible Testing Location ......................................................................5 1.3 Announcement .................................................................................................................................5 2 PRODUCT INFORMATION ..........................................................................................................................6 2.1 Application Information ...................................................................................................................6 2.2 Manufacturer Information ................................................................................................................6 2.3 Factory Information .........................................................................................................................6 2.4 General Description of Equipment under Test (EUT) ...................................................................6 2.5 Technical Information ......................................................................................................................6 3 SUMMARY OF TEST RESULTS .................................................................................................................7 3.1 Test Standards ..................................................................................................................................7 3.2 Uncertainty of Test ...........................................................................................................................7 3.3 Summary of Test Result ..................................................................................................................7 4 TEST CONFIGURATION .............................................................................................................................8 4.1 Test Equipment List .........................................................................................................................8 4.2 Test Auxiliary Equipment ............................................................................................................. 10 4.3 Test Modes ..................................................................................................................................... 10 5 EVALUATION RESULTS (EVALUATION) ................................................................................................. 11 5.1 Antenna requirement ..................................................................................................................... 11 6 RADIO SPECTRUM MATTER TEST RESULTS (RF) .............................................................................. 12 6.1 Conducted Emission at AC power line ....................................................................................... 12 6.1.1 E.U.T. Operation: ................................................................................................................. 12 6.1.2 Test Setup Diagram: ............................................................................................................ 12 6.1.3 Test Data: ............................................................................................................................ 13 6.2 Occupied Bandwidth .................................................................................................................... 15 6.2.1 E.U.T. Operation: ..........................................................…

Text truncated - open the document above for the full version.

零件承认书 Part Approval Sheet 客户名称 Customer name：东莞市和乐电子有限公司 产品机型 Product Model：HT05 FPC天线 客户料号 Risuntek P/N： 10.157.000091 版本 Version:B（V1.9） 零件名称 Prodcut Name：FPC天线 产品描述 Description: HT05_ANT+TOUCH-L V1.9 文件编号File No.： 客户签署 （Customer Signatures) 项目 （PM） 结构 （ME） 品质 （QE） 我司签署 （Inner Signatures） 品质 （QE） 结构 （ME） 射频 （RF） 杨进张清花龙滔 地址：深圳市龙华新区民治大道与工业西路交汇展滔科技大厦A座1308 电话：0755-21031946 E-mail:[email protected] http://www.yuhong-co.com/ 保存期限：长期 表单编号：HJ-RD-FM-001 版本：A 目 录 一、制/修订变更履历表 二、产品图纸 三、电气、机械性能说明 四、全尺寸测量报告 五、CPK报告 六、环境管理物质部件展开表 七、可靠性测试报告 八、包装规范 一、制/修订变更履历表 版本修订页面变更时间变更人变更原因及内容备注 A0 －2022/2/11张清花初版天线形式 A1 －2022/4/1龙滔 原因：优化天线性能 内容：天线丝印变更为V1.7 A2 －2022/5/5龙滔 原因：优化天线性能 内容：天线丝印变更为V1.9 A3 A4 A5 A6 二、产品图纸 深 圳 市 宇 鸿 实 业 有 限 公 司 三、电气、机械性能说明 1、匹配电路图 Element Value E1 N/A E2 1NH E3 2.7PF 2、S11参数 IC Ant E3 E2 E 1 3、无源效率 Freq[MHz]Gain(dBi) 效率值 (dB)Efficiency 自由空间自由空间自由空间 2400 1.11-6.7721.02 2410 1.73-6.4522.66 2420 2.19-6.2623.65 2430 2.47-6.2723.62 2440 2.65-6.3123.40 2450 2.61-6.3523.18 2460 2.57-6.3823.00 2470 2.31-6.4722.57 2480 2.12-6.6321.73 2490 1.63-7.0519.73 2500 1-7.6517.18 4、 有源OTA数据 L 信道 TRP（dbm） TRP（dBm） 自由空间 0 2.21-88.42 39 1.03-87.83 78 1.76-86.87 L 信道 TRP（dbm）TIS（dbm） 二代头模 0 -4.05-82.04 39 -4.71-81.7 78 -4.94-80.86 5、 实测效果 测试手机三星S6/苹果5S 距离14M/14M 测试场地华为人行道 测试员龙滔 四、全尺寸测量报告 编码10.157.000091零件名称FPC天线规 格 HT05-L FPC天线 材 料FPC（一对半） 供应商宇鸿测量工具二次元、千分尺测量单位MM测量日期2022.05.05 N O . 尺寸 （ DIMENSIO N） 上 限 + TOL.- TOL. 下 限 实测 1实测 2实测 3实测 4实测 5实测 6实测 7UPPER≦100%LOWER≦100% HT05-L 21.23 21.38 0.15 0.15 21.08 21.245 21.228 21.239 21.218 21.229 21.241 21.235 10%8% 4.43 4.58 0.15 0.15 4.28 4.428 4.439 4.452 4.418 4.422 4.433 4.428 15%8% 制表: 杨进审核:张清花 日期: 2022/5/5 五、CPK Report 深圳市宇鸿实业有限公司 Project name(项目) HT05-L Customer( 客户 ) 和乐 Description(零件名称) antenna Inspected(确认者) Cindy Material(材质) One half electrolytic copper Inches/MM(英寸/毫米) mm Revision(版本) A Date(日期)2022/05/05 Dim. Designator(尺寸序号) 21.23 4.43 Upper Limit(规格上限) 21.38 4.58 Lower Limit(规格下限) 21.08 4.28 1 21.32 4.45 2 21.24 4.46 3 21.29 4.47 4 21.30 4.48 5 21.24 4.49 6 21.28 4.45 7 21.30 4.46 8 21.28 4.51 9 21.28 4.52 10 21.31 4.44 11 21.26 4.52 12 21.31 4.45 13 21.29 4.46 14 21.29 4.47 15 21.23 4.45 16 21.29 4.44 17 21.29 4.50 18 21.31 4.50 19 21.25 4.50 20 21.32 4.46 21 21.24 4.49 22 21.24 4.44 23 21.24 4.45 24 21.25 4.48 25 21.27 4.49 26 21.28 4.48 27 21.26 4.46 28 21.26 4.46 29 21.28 4.47 30 21.25 4.50 31 21.23 4.44 32 21.27 4.51 MAX. 21.32 4.52 MIN. 21.23 4.44 AVERAGE 21.27 4.47 STDEV 0.03 0.02 CP 1.88 2.04 Cpk 1.33 1.45 TOOLING(测量工具) 卡尺卡尺 Prepared by (制定） : Checked by (审核） : Approved by 核准 : 杨进cindy龙滔 六、环 境 管 理 物 质 部 件 展 开 表 The Parts List of Enviromental Management Substances 产品讯息 Product Information供应商讯息 Supplier Contact Information报告类型确认结果备注 零品名称 Part name FPC天线 公司名称 Compony Name 深圳市宇鸿实业有限公司 R RoHS 2.0 £ 金属提供RoHS 4项，其它10项 物料编号 Risuntek P/N 填表人/职称 Contact Name/Title 杨进 R HF £ 非金属部件提供Cl&Br 供应商物料编号 Supplier's P/N HT05-L 填表日期 Date:YY/MM/DD 2022/5/5 Q CP65 / 与皮肤接触的部件 制造地点 Manufacurering site 东莞 电子邮件 E-mail address Q REACH / 按最新的SVHC清单 总重量 Total weight (g) 电话 Tel. No. 13714345069 Q 其它（ ） / 如Be、POPs、PFOS/PFOA等 R MSDS £ 17条，盖章，有效期 编号 No. 客户料号 Customer item number 零件名称 Part name 均质材料 Homogeneo us material 测试报告编号 Test Report No. 测试日期 Test Date (YY/MM/DD) 测试结果 Test result (ppm) 测试报告 Test report MSDS PbCdHg Cr6 + PBB PBD E ClBr DEH P DBPBBP DIB P 1 10.157.000091 基材富邦 A2210150639101004 E 2021.4.28NDNDNDNDNDNDNDNDNDNDNDND 2 油墨优利黑油ETR21805816 2021.09.0 6 NDNDNDNDNDNDNDNDNDNDNDND 3 胶纸3MSHAEC2100467601 2021.09.0 4 NDNDNDNDNDNDNDNDNDNDNDND 4 镀金创达 A22I0405950I0I00I E 2021.09.2 8 NDNDNDNDNDNDNDNDNDNDNDND 5 白字油墨川裕ETR21A04957M01 2021.10.2 9 NDNDNDNDNDNDNDNDNDNDNDND ETR21805816 PS-800黑色油墨ROHS 2021.9.6.pdf MSDS_PS-800黑 色油墨.pdf MSDS_3M9471 白色.pdf MSDS_ZSR-150 白色文字油墨.pdf ETR21A04957M 01 ZSR-150白色文字油墨ROHS卤素 2021.10.29 .pdf SHAEC21187301 01 SGS-9471LEROHS十项 EN-20210904.PDF A22I0405950I0I 00IE 镀金 ROHS HF 2021.10.07.pdf 镀金 MSDS报告.pdf A221015063910 1004E 单面基材 ROHS HF 2021.4.2…

Text truncated - open the document above for the full version.