2AR4E-VORMOR-Z6Language Translator Device

Shenzhen Beibo Intelligent Technology Co., Ltd. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Shenzhen Beibo Intelligent Technology Co., Ltd. Address: 512,Building A,Quansen Qichuangyuan, No.58-60,Blong Road,Dalang Street，Longhua District,Shenzhen Product Name: Language Translator Device FCC ID: 2AR4E-VORMOR-Z6 Model(s): VORMOR-Z6,VORMOR-Z2,VORMOR-Z3,VORMOR-Z5, VORMOR-Z7, VORMOR-Z8,VORMOR-Z9,VORMOR-Z10, VORMOR-Z11,VORMOR-Z12,VORMOR-Z13,VORMOR-Z15, VORMOR-Z16,VORMOR-Z17,VORMOR-A10,VORMOR-A20, VORMOR-A30,VORMOR-A50,VORMOR-A60,VORMOR-A70, VORMOR-A80 2.911(d)(5)(i) Equipment Type We, [Shenzhen Beibo Intelligent Technology Co., Ltd.] certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Wendy zhang Date: Sep.11,2023 Title and Company name: manager / Shenzhen Beibo Intelligent Technology Co., Ltd. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com Shenzhen Beibo Intelligent Technology Co., Ltd. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 munications-supply-chain-through-the

Shenzhen Beibo Intelligent Technology Co., Ltd. 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Shenzhen Beibo Intelligent Technology Co., Ltd. Address: 512,Building A,Quansen Qichuangyuan, No.58-60,Blong Road,Dalang Street，Longhua District,Shenzhen Product Name: Language Translator Device FCC ID: 2AR4E-VORMOR-Z6 Model(s): VORMOR-Z6,VORMOR-Z2,VORMOR-Z3,VORMOR-Z5, VORMOR-Z7, VORMOR-Z8,VORMOR-Z9,VORMOR-Z10, VORMOR-Z11,VORMOR-Z12,VORMOR-Z13,VORMOR-Z15, VORMOR-Z16,VORMOR-Z17,VORMOR-A10,VORMOR-A20, VORMOR-A30,VORMOR-A50,VORMOR-A60,VORMOR-A70, VORMOR-A80 2.911(d)(5)(ii) Applicant filing We, [Shenzhen Beibo Intelligent Technology Co., Ltd.] certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Wendy zhang Date: Sep.11,2023 Title and Company name: manager / Shenzhen Beibo Intelligent Technology Co., Ltd. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Beibo Intelligent Technology Co., Ltd. 2.911 (d)(7)USA Agent v1.3 Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen Beibo Intelligent Technology Co., Ltd. Address: 512,Building A,Quansen Qichuangyuan, No.58-60,Blong Road,Dalang Street，Longhua District,Shenzhen Product Name: Language Translator Device FCC ID: 2AR4E-VORMOR-Z6 Model(s): VORMOR-Z6,VORMOR-Z2,VORMOR-Z3,VORMOR-Z5,VORMOR-Z7, VORMOR-Z8,VORMOR-Z9,VORMOR-Z10,VORMOR-Z11,VORMOR-Z12,VORMOR-Z13 VORMOR-Z15,VORMOR-Z16,VORMOR-Z17,VORMOR-A10,VORMOR-A20, VORMOR-A30,VORMOR-A50,VORMOR-A60,VORMOR-A70,VORMOR-A80 2.911(d)(7) USA Designated Agent for Service of Process We, [Shenzhen Beibo Intelligent Technology Co., Ltd.] (“the applicant”) designate [THREE STONES MEDIA LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: THREE STONES MEDIA LLC Address: 1200 Broadway St. APT 329, Los Angeles, CA90015 FRN: 0033401761 Contact Name: Sijie Zhang Telephone No: (267) 909-3692 Email: [email protected] Applicant Company name: Shenzhen Beibo Intelligent Technology Co., Ltd. Address: 512,Building A,Quansen Qichuangyuan, No.58-60,Blong Road,Dalang Street，Longhua District,Shenzhen FCC Grantee Code: 2AR4E Contact Name: Wendy zhang Telephone No: + 8613615185095 Email: [email protected] Shenzhen Beibo Intelligent Technology Co., Ltd. 2.911 (d)(7)USA Agent v1.3 Signature: Title: CEO Signature: Title: manager Date: Sep. 11,2023 Date: Sep. 11,2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Shenzhen Beibo Intelligent Technology Co., Ltd. Agent Authorization Company: Shenzhen Beibo Intelligent Technology Co., Ltd. Address: 512,Building A,Quansen Qichuangyuan, No.58-60,Blong Road,Dalang Street，Longhua District,Shenzhen Product Name: Language Translator Device Model Number(s): VORMOR-Z6,VORMOR-Z2,VORMOR-Z3,VORMOR-Z5, VORMOR-Z7, VORMOR-Z8,VORMOR-Z9,VORMOR-Z10, VORMOR-Z11,VORMOR-Z12,VORMOR-Z13,VORMOR-Z15, VORMOR-Z16,VORMOR-Z17,VORMOR-A10,VORMOR-A20, VORMOR-A30,VORMOR-A50,VORMOR-A60,VORMOR-A70, VORMOR-A80 Product Description: Language Translator Device We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Sep.11,2023 Name: Wendy zhang Title: manager Company: Shenzhen Beibo Intelligent Technology Co., Ltd.

Shenzhen Beibo Intelligent Technology Co., Ltd. Family models declaration letter. Date: September 11, 2023 We Shenzhen Beibo Intelligent Technology Co., Ltd. Of Address of Applicant: 512,Building A,Quansen Qichuangyuan, No.58-60,Blong Road,Dalang Street，Longhua District,Shenzhen Product: Language Translator Device Model Name: VORMOR-Z6 Serial Model: VORMOR-Z2,VORMOR-Z3,VORMOR-Z5, VORMOR-Z7, VORMOR-Z8,VORMOR-Z9,VORMOR-Z10, VORMOR-Z11,VORMOR-Z12,VORMOR-Z13,VORMOR-Z15, VORMOR-Z16,VORMOR-Z17,VORMOR-A10,VORMOR-A20, VORMOR-A30,VORMOR-A50,VORMOR-A60,VORMOR-A70, VORMOR-A80 Difference description of series models: All the model are the same circuit and RF module, except the model names and colors Thanks Sincerely Signature Name: Wendy zhang Date:Sep.11,2023 Title: manager

Shenzhen Beibo Intelligent Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 11, 2023 Subject; Request for Confidentiality FCC ID: 2AR4E-VORMOR-Z6 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Wendy zhang Title: manager

- Page 1 of 3 - ET-23080969 Product Name: Language Translator Device Model No.: VORMOR-Z6 Ext Photos - Page 2 of 3 - ET-23080969 - Page 3 of 3 - ET-23080969 -----END-----

1 / 1 Label size: 50mm*30mm Product Name :Language Translator Device Model No. : VORMOR-Z6 Rated specification : 5V 1A Manufacturer :Shenzhen Beibo Intelligent Technology Co., Ltd. FCC ID : 2AR4E-VORMOR-Z6 Made in China location

- Page 1 of 5 - ET-23080969 Product Name: Language Translator Device Model No.: VORMOR-Z6 Internal photos - Page 2 of 5 - ET-23080969 RF ANT - Page 3 of 5 - ET-23080969 - Page 4 of 5 - ET-23080969 - Page 5 of 5 - ET-23080969 ------END-----

FCC ID: 2AR4E-VORMOR-Z6 RF Exposure evaluation According to 447498 and part 2.1093 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] *[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, For BLE Frequency (MHz) Max power (dBm) Max power (mW) Min. distance (mm) Calculation Value Threshold Value 2440 2.41 1.74 5 0.54 3.0 For 2.4G WIFI Frequency (MHz) Max power (dBm) Max power (mW) Min. distance (mm) Calculation Value Threshold Value 2412 9.28 8.47 5 2.63 3.0 So SAR test is not required Mark: The BT(BLE) and WIFI cannot operate simultaneously.

深圳市千目通讯科技有限公司 Shenzhen Qianmu Communication Technology Co.,Ltd. 联系人：王志强 联系方式：13760153961 电话：0755-21633653 传真：0755-21633541 深圳市宝安区航城街道三围社区航空路华丰智谷-航城高科技产业园A座4层425、443号 No 1Page Antenna Acknowledgement Applicable model VORMOR-Z6 Customer Shenzhen Beibo Intelligent Technology Co., Ltd. Specification description Product content Specification Customer material code Specification description antenna FPC/Black/Character BBZN-F1-Z6-WIFI/BT 01.BBDZ600008 Change of resume Serial number Date Version Brief description of the changes 1 2023-08-18 V1.0 New project 2 3 Supplier sample confirmation Research and development Structure Audit Judgement PASS Customer sample confirmation Electron Structure Project Procurement Quality Audit Reasons for rejection or other precautions: 1、Matching circuit- antenna The original matching circuit has not changed 2. Antenna 2400-2500MHz active data WIFI 2400~2500MHz 802.11b 11MBps Channel 1 6 11 TRP 13.23 13.33 13.12 TIS -81.47 -82.16 -81.66 3. Antenna gain and efficiency 4. Antenna pattern and apple pattern 5、Environmental treatment 6、Structural drawings Main board is attached with conductive wool and screen is grounded Antenna location

Report No.: ET-23080969E01 This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen ETR Standard Technology Co., Ltd. TEST REPORT Applicant: Shenzhen Beibo Intelligent Technology Co., Ltd. Address of Applicant: 512,Building A,Quansen Qichuangyuan, No.58-60,Blong Road,Dalang Street，Longhua District,Shenzhen Manufacturer/Factory: Shenzhen Beibo Intelligent Technology Co., Ltd. Address of Manufacturer 512,Building A,Quansen Qichuangyuan, No.58-60,Blong Road,Dalang Street，Longhua District,Shenzhen Product Name: Language Translator Device Model No.: VORMOR-Z6,VORMOR-Z2,VORMOR-Z3,VORMOR-Z5, VORMOR-Z7, VORMOR-Z8,VORMOR-Z9,VORMOR-Z10, VORMOR-Z11,VORMOR-Z12,VORMOR-Z13,VORMOR-Z15, VORMOR-Z16,VORMOR-Z17,VORMOR-A10,VORMOR-A20, VORMOR-A30,VORMOR-A50,VORMOR-A60,VORMOR-A70, VORMOR-A80 Trade Mark: VORMOR FCC ID: 2AR4E-VORMOR-Z6 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of Test: Sep.01, 2023- Sep.15, 2023 Date of report issued: Sep.15, 2023 Test Result : PASS * Remark: * In the configuration tested, the EUT complied with the standards specified above. The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver Prepared By Shenzhen ETR Standard Technology Co., Ltd. Address: No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Compiled by: Reviewed by: Approved by: Project Engineer Project Manager Authorized Signature - Page 2 of 33 - Report No.: ET-23080969E01 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Report Revision History Report No. Description Issue Date ET-23080969E01 Original Sep.15, 2023 - Page 3 of 33 - Report No.: ET-23080969E01 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Contents Page 1. TEST SUMMARY ......................................................................................................................................4 2. GENERAL INFORMATION .......................................................................................................................5 2.1 GENERAL DESCRIPTION OF EUT .................................................................................................................5 2.2 TEST MODE ................................................................................................................................................7 2.3 DESCRIPTION OF SUPPORT UNITS ...............................................................................................................7 2.4 DEVIATION FROM STANDARDS .....................................................................................................................7 2.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................7 2.6 TEST FACILITY ............................................................................................................................................7 2.7 TEST LOCATION ..........................................................................................................................................7 2.8 ADDITIONAL INSTRUCTIONS .........................................................................................................................7 3. TEST INSTRUMENTS LIST ......................................................................................................................8 4. TEST RESULTS AND MEASUREMENT DATA .......................................................................................9 4.1 ANTENNA REQUIREMENT .............................................................................................................................9 4.2 CONDUCTED EMISSIONS ...........................................................................................................................10 4.3 DUTY CYCLE .............................................................................................................................................13 4.4 CONDUCTED OUTPUT POWER ...................................................................................................................15 4.5 6DB BANDWIDTH ......................................................................................................................................16 4.6 POWER SPECTRAL DENSITY ......................................................................................................................18 4.7 BAND EDGES ............................................................................................................................................20 Conducted Emission Method ...................................................................................................................20 Radiated Emission Method ......................................................................................................................21 4.8 SPURIOUS EMISSION .................................................................................................................................23 Conducted Emission Method ...................................................................................................................23 Radiated Emission Method ......................................................................................................................25 5. TEST SETUP PHOTO ............................................................................................................…

Text truncated - open the document above for the full version.

Report No.: ET-23080969E02 Tel: +86 755 85259392 Email: [email protected] No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China TEST REPORT Applicant: Shenzhen Beibo Intelligent Technology Co., Ltd. Address of Applicant: 512,Building A,Quansen Qichuangyuan, No.58-60,Blong Road,Dalang Street，Longhua District,Shenzhen Manufacturer/Factory: Shenzhen Beibo Intelligent Technology Co., Ltd. Address of Manufacturer 512,Building A,Quansen Qichuangyuan, No.58-60,Blong Road,Dalang Street，Longhua District,Shenzhen Product Name: Language Translator Device Model No.: VORMOR-Z6,VORMOR-Z2,VORMOR-Z3,VORMOR-Z5, VORMOR-Z7, VORMOR-Z8,VORMOR-Z9,VORMOR-Z10, VORMOR-Z11,VORMOR-Z12,VORMOR-Z13,VORMOR-Z15, VORMOR-Z16,VORMOR-Z17,VORMOR-A10,VORMOR-A20, VORMOR-A30,VORMOR-A50,VORMOR-A60,VORMOR-A70, VORMOR-A80 Trade Mark: VORMOR FCC ID: 2AR4E-VORMOR-Z6 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of Test: Sep.01, 2023- Sep.15, 2023 Date of report issued: Sep.15, 2023 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Remark: The results shown in this test report refer only to the sample(s) tested , this test report cannot be reproduced, except in full without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver Prepared By Shenzhen ETR Standard Technology Co., Ltd. Address: No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Compiled by: Reviewed by: Approved by: Project Engineer Project Manager Authorized Signature - Page 2 of 55 - Report No.: ET-23080969E02 Report Revision History Report No. Description Issue Date ET-23080969E02 Original Sep.15, 2023 - Page 3 of 55 - Report No.: ET-23080969E02 Tel: +86 755 85259392 Email: [email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Contents Page 1. TEST SUMMARY ......................................................................................................................................4 2. GENERAL INFORMATION .......................................................................................................................5 2.1 GENERAL DESCRIPTION OF EUT .................................................................................................................5 2.2 TEST MODE ................................................................................................................................................7 2.3 DESCRIPTION OF SUPPORT UNITS ...............................................................................................................7 2.4 DEVIATION FROM STANDARDS .....................................................................................................................7 2.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................7 2.6 TEST FACILITY ............................................................................................................................................7 2.7 TEST LOCATION ..........................................................................................................................................7 2.8 ADDITIONAL INSTRUCTIONS .........................................................................................................................7 3. TEST INSTRUMENTS LIST ......................................................................................................................8 4. TEST RESULTS AND MEASUREMENT DATA .......................................................................................9 4.1 ANTENNA REQUIREMENT .............................................................................................................................9 4.2 CONDUCTED EMISSIONS ...........................................................................................................................10 4.3 DUTY CYCLE .............................................................................................................................................13 4.4 CONDUCTED OUTPUT POWER ...................................................................................................................16 4.5 6DB BANDWIDTH & 99% CHANNEL BANDWIDTH ........................................................................................17 4.6 POWER SPECTRAL DENSITY ......................................................................................................................22 4.7 BAND EDGES ............................................................................................................................................25 Conducted Emission Method ...................................................................................................................25 Radiated Emission Method ......................................................................................................................28 4.8 SPURIOUS EMISSION .................................................................................................................................33 Conducted Emission Method ...................................................................................................................33 Radiated Emission Method ......................................................................................................................38 5. TEST SETUP PHOTO .............................................................................................................................55 6. EUT CONSTRUCTIONAL DETAILS .......................................................................................................55 - Page 4 of 55 - Report No.: ET-23080969E02 Tel: +86…

Text truncated - open the document above for the full version.

ET-23080969 Page 1 of 2 Product Name: Language Translator Device Test Model No.: VORMOR-Z6 Test Setup Photo Radiated emissions 30MHz to1GHz Above 1GHz ET-23080969 Page 2 of 2 Conducted Emission ------End------