2AR93-310B2626KEYLESS BLUETOOTH CYLINDER

BLUE : Pantone Black C 1:0.7 S0 SCALE: REVPART NAMEPART NUMBER PROPRIETARY AND CONFIDENTIAL : THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ACSYS. ANY REPRODUCTION IN PART OR AS A WHOLE WIT HOUT T HE WRITTEN PERMISSION OF ACSYS IS PROHIBITED. CONFIDENTIAL INDUSTRY BLE CYLINDER USER MANUAL 421-038A Folding Marks Trim Marks BLE-310B-JE-S2 KEYLESS BLUETOOTH CYLINDER USER MANUAL 70mm 105mm [email protected] / www.acsys.com / +852 81914038 22F, Tai Yau Building, 181 Johnston Road, Wanchai, Hong Kong Copyright © 2020 Acsys International Ltd. DIMENSIONS WHAT’S IN THE BOX • ACSYS BLE cylinderx 1pcs • User manual x 1pcs INSTALL APP PREPARING THE LOCK FOR USE • Search for “Acsys Mobile App” on your device app store • Download and install the app on your device 1 1 2 3 4 • On the welcome screen, select “Acsys iAMS Enterprise” from the available app types • Register the app by following the on-screen instructions 2 REGISTER LOCK •7 1 2 3 • Open Main Menu Add Access Point • Enter Site ID • Enter PIN code • Press Register 1 2 3 4 4 6 • Add Access Point • Enter Lock ID 5 6 5 • Lock is registered 8 DELETE LOCK 1 2 3 • Open Main Menu Delete Access Point • Enter Site ID • Enter PIN code • Press Delete 1 2 3 4 4 • Press the Delete button next to the correct Lock name 5 5 • Lock is deleted 7 1 2 3 • Enter Site ID • Enter PIN code • Press Check-in or Check-out depending on the operation type. 1 2 3 OPERATE LOCK • Press the Open button next to the Lock name 4 4 • Activate Lock by Push and holding the knob in its end position 5 OPEN JUMP START LOCK 1 • 2 2 While jump-starting, the LED flashes green every 2 seconds indicating that Bluetooth is advertising during which, the lock can be opened using the mobile app. After 60 sec, the lock enters in sleep mode indicated by an orange LED glow If the 60 sec have elapsed, press the Knob or remove and reconnect the USB power to put the lock in Bluetooth advertising mode again 3 REPLACE BATTERY SPECIFICATION 1 Remove the knob,Replace the Battery Loosen and Remove the Grub Screws on both sides of the knob, Using 1.5mm Hex Allen Screw Place the knob in position and push towards end and position the Screw holes. Place and the tighten the screws,Now the lock is ready for the Operation 2 3 ACTIONSTATE INITIALIZED LOCK INDICATION Bluetooth advertising Lock is open for 60 sec BLANK LOCK INDICATION 1 red for 60 sec 1 red 1 green Push the Knob 1 quick red Battery Replacement Bluetooth advertising Sleep mode USB jump start 1 green orange glow 1 red orange glow LED INDICATIONS 2 3 Using a 1.5 mm hex Allen key, loosen and remove the grub screws from both sides of the knob. Remove the battery insulator, reinstall the battery into the battery holder, and ensure it is properly seated. Press the knob fully into position,align the grub screws with their holes, and tighten them securely Release the knob and verify that it rotates and operates smoothly. 1 2 3 •7 •7 •6 •6 Activate the Lock by pushing the Knob till end, The Led will flash in green for every two seconds for 60 Seconds(Start of operation) The green LED flashes continously (Middle of operation) The green LED flashes long twice (Operation Success) • After the click sound the Led will flash once in green color,Turn the knob towards clockwise direction 6 • Once the cam is completely inside the lock is now in unlocked condition 7 • If the knob is released the cam will be retracted to its Locked position 8 6 • 7 • Repeat the Same for close operations 9 Insert a Type C USB cable in the USB port and connect it to USB wall charger or a portable power bank Push and Hold the Knob • 5 GENERAL ENVIRONMENT ELECTRONICS COMPATIBILITY CERTIFICATION WARRANTY Dimensions & Weight Material Standarad Storage Temperature Relative Humidity (RH) Battery Type Battery Life • This user manual is for reference only. Minor differences can be found in user interface. • Please follow the instructions to set up your device. In case of any issue, please contact [email protected] • Specifications may be altered without prior written notice. NOTE -20C +65C 0 95% without condensation 92x36x20 mm I 125g Aluminium Button knob/Brass with Chrome Plating Cylinder body Euro-DIN Operational Temperature -20 °C to 80 °C -20 °C to 65 °C 0 to 95% (without Condensation) Non - Rechargeable I Replaceable I Jump Start 3 Years Jump - Start USB - C Encryption AES 128-bit Audit TrailAccess Logs (In-App and Software) Mobile App Desktop Software iAMS Smart Access Mobile Application (iOS & Android) iAMS (Intelligent Access Management System) Electronics Mechanical CE, FCC, RoHS IP68, EN15684 2 Years (1) Warranty Visual IndicatorTricolor LED Activate Lock by Pushing the Knob till end,Led will flash in Red color every two seconds for 60 seconds.(Start of operation) The Red LED flashes continously (Middle of operation) The Green LED flashes long twice (Operation Success) jump start In all the end of operations,the green In all the end of operations,the green Led flash denotes success,and the orangeLed flash denotes success,and the orange and red denotes failure of the operation and red denotes failure of the operation Succes and Failure indications FCC Statement FCC ID : 2AR93-310B2626 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.SPECIFICATIONS NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed an…

Text truncated - open the document above for the full version.

Acsys International Limited U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Baihetian Innovative Solutions FRN: 0033401605 Contact Name: Kenneth Young Street Address: 6837 Chase Rd City/Province/Zip: Dearborn, MI 48126 Telephone No: 313-395-3113 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: Aug 19, 2026 Signed by (Printed Name/Title): Kenneth Young/Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Acsys International Limited Grantee Code: 2AR93 FCC ID: 2AR93-310B2626 Contact Name: Jason Zhang Street Address: 22nd Floor, Tai Yua Building, 181 Johnston Road, City/Province/Zip: Wanchai, Hong Kong Telephone No: +852 8191 4038 Email: [email protected] Applicant Signature: Date:8/19/2026 Signed by (Printed Name/Title): Jason Zhang/ Quality manager Aug 2026

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Acsys International Limited Address 22nd Floor, Tai Yua Building, 181 Johnston Road, Wanchai, Hong Kong FRN 0028145084 Grantee Code 2AR93 FCC ID: 2AR93-310B2626 Authorized Contact Name Jason Zhang Contact Phone +852 8191 4038 Contact Email [email protected] Acsys International Limited (“the applicant”) certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant [ is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is inherently compliant. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List: Covered List Applicant Signature: Date: 8/18/2026 Print Name: Jason Zhang Title: Quality manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Application Declaration QSF21-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Acsys International Limited Address 22nd Floor, Tai Yua Building, 181 Johnston Road, Wanchai, Hong Kong FRN 0028145084 Grantee Code 2AR93 FCC ID: 2AR93-310B2626 Authorized Contact Name Jason Zhang Contact Phone +852 8191 4038 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this appli cation, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules. c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that prod uction units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and a gree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP- 100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISE D as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review , certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of t he Anti- Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the d efinition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Applic ation Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date: 8/18/2026 Print Name: Jason Zhang Title: Quality manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Acsys International Limited Date: 8/18/2026 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AR93-310B2626 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own.. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Acsys International Limited This authorization is valid until further written notice from the applicant. Print Name: Jason Zhang Title: Quality manager Signature: On behalf of Company: Acsys International Limited Telephone: +852 8191 4038 E-mail: [email protected]

Acsys International Limited TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2AR93-310B2626 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 0 days from the grant date, whichever is less. If the device is marketed within 0 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. Sincerely, Print Name: Jason Zhang Title: Quality manager Signature: On behalf of Company: Acsys International Limited Telephone: +852 8191 4038 E-mail: [email protected]

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 1 of 4 External Photos for FYCR2606000187AT FCC ID: 2AR93-310B2626 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 2 of 4 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 3 of 4 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev. A/0 Page: 4 of 4 - End of the Appendix -

FCC ID size: 2.8*25mm

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 1 of 4 Internal Photos for FYCR2606000187AT FCC ID: 2AR93-310B2626 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 2 of 4 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 3 of 4 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev. A/0 Page: 4 of 4 - End of the Appendix - ANT

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600018703 Page: 1 of 11 RF EXPOSURE EVALUATION REPORT Application No.: FYCR2606000187AT Applicant: Acsys International Limited Address of Applicant: 22nd Floor, Tai Yua Building, 181 Johnston Road, Wanchai, Hong Kong Manufacturer: Gusuo Intelligence Limited (Shenzhen) Address of Manufacturer: D605-3, Silver Star Tech Bldg., 1301 Guanguang Rd., Xinlan Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China Equipment Under Test (EUT): EUT Name: KEYLESS BLUETOOTH CYLINDER Model No.: SL-BLE Trade Mark: Acsys FCC ID: 2AR93-310B2626 Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2026-06-29 Date of Evaluation: 2026-07-09 to 2026-07-21 Date of Issue: 2026-08-12 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600018703 Page: 2 of 11 Revision Record Version Chapter Date Modifier Remark 01 2026-08-12 Original Authorized for issue by: Byron Liang/Project Engineer Tree Zhan/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600018703 Page: 3 of 11 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 4 3.4 Test Location ...................................................................................................................................... 5 3.5 Test Facility ........................................................................................................................................ 5 3.6 Deviation from Standards ................................................................................................................... 5 3.7 Abnormalities from Standard Conditions ........................................................................................... 5 4 FCC Radiofrequency radiation exposure limits .................................................................................... 6 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 6 4.2 MPE-based Exemption ...................................................................................................................... 6 4.3 SAR-based Exemption ....................................................................................................................... 7 4.4 RF Exposure Test Exemptions for Simultaneous Transmission ........................................................ 9 5 Measurement and Calculation ............................................................................................................... 10 5.1 Maximum transmit power ................................................................................................................. 10 5.2 RF Exposure Calculation ................................................................................................................. 10 6 EUT Constructional Details (EUT Photos) ........................................................................................... 11 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600018703 Page: 4 of 11 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power Supply: DC 3V Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: CERAMIC ANTENNA Antenna Gain: 2.09dBi Remark:The information in this section is provided by the applicant or manufacturer, CCS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 3.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600018703 Page: 5 of 11 3.4 Test Location All tests were performed at: Compliance Certification Services（Kunshan）Inc. Shenzhen branch. Fuyong lab. Xinlong TechnoPark,Fengtang Road, Fuyong Subdistrict, Bao’an, Shenzhen, China Tel: +86 755 8866 3988 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 6606.01) Compliance Certification Services（Kunshan）Inc. Shenzhen branch is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 6606.01. • FCC –Designation Number: CN1322 Compliance Certification Services（Kunshan）Inc. Shenzhen branch has been recognized as an accredit…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600018702 Page: 1 of 59 TEST REPORT Application No.: FYCR2606000187AT Applicant: Acsys International Limited Address of Applicant: 22nd Floor, Tai Yua Building, 181 Johnston Road, Wanchai, Hong Kong Manufacturer: Gusuo Intelligence Limited (Shenzhen) Address of Manufacturer: D605-3, Silver Star Tech Bldg., 1301 Guanguang Rd., Xinlan Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China Equipment Under Test (EUT): EUT Name: KEYLESS BLUETOOTH CYLINDER Model No.: SL-BLE Trade Mark: Acsys FCC ID: 2AR93-310B2626 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2026-06-29 Date of Test: 2026-07-09 to 2026-07-21 Date of Issue: 2026-08-12 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600018702 Page: 2 of 59 Revision Record Version Chapter Date Modifier Remark 01 2026-08-12 Original Authorized for issue by: Byron Liang/Project Engineer Tree Zhan/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600018702 Page: 3 of 59 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10- 2020+Cor.1-2023 Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions which fall in the restricted bands ANSI C63.10- 2020+Cor.1-2023 Section 6.10.5 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10- 2020+Cor.1-2023 Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10- 2020+Cor.1-2023 Section 6.6 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Maximum Conducted Output Power ANSI C63.10- 2020+Cor.1-2023 Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10- 2020+Cor.1-2023 Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectral Density ANSI C63.10- 2020+Cor.1-2023 Section 11.10.3 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10- 2020+Cor.1-2023 Section 6.10.4 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10- 2020+Cor.1-2023 Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600018702 Page: 4 of 59 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 6 4.3 Measurement Uncertainty .................................................................................................................. 6 4.4 Test Location ...................................................................................................................................... 7 4.5 Test Facility ........................................................................................................................................ 7 4.6 Abnormalities from Standard Conditions ........................................................................................... 7 5 Equipment List .......................................................................................................................................... 8 6 Radio Spectrum Technical Requirement ............................................................................................. 11 6.1 Antenna Requirement ...................................................................................................................... 11 6.1.1 Test Requirement: ....................................................................................................................... 11 6.1.2 Conclusion ................................................................................................................................... 11 7 Radio Spectrum Matter Test Results .................................................................................................... 12 7.1 Conducted Emissions at AC Power Line (150kHz-30MHz) ............................................................. 12 7.1.1 E.U.T. Operation .......................................................................................................................... 12 7.1.2 Test Mode Description ................................................................................................................. 12 7.1.3 Test Setup Diagram ..................................................................................................................... 13 7.1.4 Measurement Procedure and Data............................................................................................. 13 7.2 Radiated Emissions which fall in the res…

Text truncated - open the document above for the full version.

Approval sheet Page 1 of 12 ASC_RFECA3216060A1T_V09 Aug. 2018 RFECA Series – RoHS Compliance CERAMIC ANTENNA Halogens Free Product 2.4 GHz ISM Band RF Application P/N: RFECA3216060A1T *Contents in this sheet are subject to change without prior notice 566-1, Ko-Shi Road , Yang-Mei, Tao-Yuan, 32668, Taiwan Approval sheet Page 2 of 12 ASC_RFECA3216060A1T_V09 Aug. 2018 FEATURES 1. Surface Mounted Devices with a small dimension of 3.2 X 1.6 X 0.6 mm 3 meet future miniaturization trend. 2. LTCC process. 3. High stability in Temperature / Humidity Change. 4. Superb performance to place on the middle of PCB edge and excellent peak/ average gain observed by field test application. APPLICATIONS 1. ISM Band 2.4GHz applications. 2. Bluetooth.. CONSTRUCTION DIMENSIONS Figure Symbol Dimension (mm) L 3.10 ± 0.20 W 1.60 ± 0.20 T 0.60 ± 0.10 A 0.25 ± 0.20 PINConnection 1 Feeding 2 Soldering terminal Approval sheet Page 3 of 12 ASC_RFECA3216060A1T_V09 Aug. 2018 SOLDER LAND PATTERN DESIGN Type-1: Empty Space 8.0mm x 3.0 mm Figure (Empty Space 8.0 mm x 3.0 mm) The limited size for ECA3216 is L>30mm and D>6mm Land Pattern TYPE-1 TEST BOARD ELECTRONIC CHARACTERISTICS *Note 1. Central Frequency should be defined after customers’ application approval. Item Specification Working Frequency Range 2.4GHz~2.4835GHz (Note-1) Gain 2 dBi (Typical) VSWR 2.0 max. Polarization Linear Azimuth Beamwidth Omni-directional Impedance 50 Power Capacity 3 W max. Maximum Input Power 5 Watts for 5 minutes Approval sheet Page 4 of 12 ASC_RFECA3216060A1T_V09 Aug. 2018 Type-2: Empty Space 6.3mm x 4.0 mm Figure (Empty Space 6.3 mm x 4.0 mm) The limited size for ECA3216 is L>30mm and D>6mm Land Pattern TYPE-2 TEST BO…

Text truncated - open the document above for the full version.