2ARD3-LD146UNO MINI CHARGER

PRODUCT OVERVIEW 1. Built-in USB-A cable (1,2m / 47,2”) 2. Wireless charging surface (10W) 3. LED indicator (charging status) FEATURES 1. Charge any Qi enabled smartphone and device by simply setting it down 2. Advanced Qi wireless charging solution enables you to charge your device without plugging in a cable 3. The Uno Mini Charger is Qi certified meaning any Qi compatible devices can charge on it. COMPATIBILITY Works with all Qi v1.2 and newer devices. This includes iPhone 8 Plus and newer versions, all Qi certified android phones and most Qi-enabled devices such as Lexon products (Mino+, Mina M, Mina L and more). GET STARTED Charging your Qi-enabled device Caution: Make sure to plug the USB plug into a Quick Charge 3.0 Certified USB power adaptor or any external AC adaptor that delivers 10W or more (5V/2A, 9V/2A, 12V/1.5A). Using a different power adaptor with lower specification than mentioned above, will significantly affect the wireless charging performance and may cause irreversible damage to your device. 1. Connect the cable end into a quick charge 3.0 Certified USB power adapter or any power adaptor that delivers 10W or more (5V/2A, 9V/2A, 12V/1.5A). Place the Qi-supported smartphone or device on wireless charging surface. 2. Make sure the device is successfully charged. Then, remove the device once charging is completed. Note: If the mobile device does not charge, ensure that the wireless charger is powered on and that the device is correctly positioned on the wireless charging surface. Make sure there is no metal or other foreign object between the device and the wireless charger. Then reposition the device again. SAFETY PRECAUTIONS Please read this important safety information before you use the device. It contains general safety information for devices and may include content that does not apply to your device. Follow the warning and caution information to prevent injury to yourself or others and to prevent damage to your device. • Make sure to plug the USB plug into a QC 3.0 certified USB power adaptor or any external AC adaptor that delivers 10W or more (5V/2A, 9V/2A, 12V/1.5A). • Do not touch the device, power cord or the electric socket with wet hands or other wet body parts • Do not bend or damage the power cord • Use manufacturer-approved chargers and supplies • Do not drop or cause an impact to the charger or the device • Protect the device, battery and charger from damage • Do not store your device near or in heaters, microwaves, hot cooking equipment, or high-pressure containers • Do not attempt to service, repair or disassemble the device by yourself. • Do not put metal objects or magnets between the mobile phone and the wireless charger surface. PRODUCT SPECIFICA TIONS Support: Qi enabled mobile devices Material: ABS, Zinc Alloy & Silicone Net Weight: 85 gr / 0.19 lb Dimension: 6.7 x 6.0 x 0.85 cm / 2.64 x 2.36 x 0.33” Frequency band: 100-205KHz Input port: 5V/2A, 9V/2A or 12V/1.5A Wireless charging output: 10W(max), 7.5W, 5W Wireless Charging: Qi-certified Transmission distance: 2mm-6mm / 0.07-0.23” USB cord length: 1,2m / 47,2” Operating temperature: 0º C - 35º C / 32°F – 95°F International warranty: 1 year STATUSLED Standby modeLight Off Charging Green light flashes 15 seconds and then turns Off Foreign object detectedRed light flashes Power supplyGreen light flashes twice and then turns off APERÇU DU PRODUIT 1. Câble USB-A intégré (1,2m) 2.Surface de charge par induction (10W) 3. Indicateur LED (état de charge) CARACTÉRISTIQUES 1. Chargez n'importe quel smartphone ou appareil compatible Qi en le posant simplement sur la surface de charge par induction. 2. La solution de charge par induction Qi avancée vous permet de charger votre appareil sans brancher de câble. 3.Le Uno mini charger est certifié Qi, ce qui signifie que les appareils compatibles Qi fonctionnent avec ce dispositif. COMPATIBILITÉ Fonctionne avec tous les appareils Qi v1.2 et plus récents. Cela inclut l'iPhone 8 Plus et les versions plus récentes, tous les téléphones Android certifiés Qi et la plupart des appareils compatibles Qi tels que les produits Lexon (Mino+, Mina M et Mina L). POUR COMMENCER Chargez votre appareil compatible Qi Attention : Veillez à brancher la prise USB sur un adaptateur secteur USB certifié Quick Charge 3.0 ou sur tout adaptateur secteur externe délivrant 10W ou plus (5V/2A, 9V/2A, 12V/1.5A). L'utilisation d'un adaptateur d'alimentation différent avec des spécifications inférieures à celles mentionnées ci-dessus, affectera de manière significative les performances de charge par induction et peut causer des dommages irréversibles à votre appareil. 1. Branchez l'extrémité du câble à un adaptateur d'alimentation USB certifié charge rapide 3.0 ou à tout adaptateur d'alimentation délivrant 10W ou plus (5V/2A, 9V/2A, 12V/1.5A). Placez le smartphone ou l'appareil compatible Qi sur la surface de charge par induction. 2. Assurez-vous que l'appareil se charge correctement. Ensuite, retirez l'appareil une fois la charge terminée. Remarque: Si l'appareil mobile ne se charge pas, assurez-vous que le chargeur par induction est sous tension et que l'appareil est correctement positionné sur la surface de charge par induction. Assurez-vous qu'il n'y a pas de métal ou d'autre objet étranger entre l'appareil et le chargeur par induction. Repositionnez ensuite l'appareil. PRÉCAUTIONS DE SÉCURITÉ Veuillez lire ces informations de sécurité importantes avant d'utiliser l'appareil. Elles contiennent des informations générales sur la sécurité des appareils et peuvent contenir des informations qui ne s'appliquent pas à votre appareil. Suivez les informations d'avertissement et de précaution pour éviter de vous blesser ou de blesser d'autres personnes et pour éviter d'endommager votre appareil. • Veillez à brancher la prise USB sur un adaptateur d'alimentation USB certifié QC 3.0 ou sur tout adaptateur secteur externe délivrant 10W ou plus (5V/2A, 9V/2A, 12V/1.5A). • Ne touchez pas l'appareil, le…

Text truncated - open the document above for the full version.

C5266091_X8_Ed.1 Letter of Authorization LEXON Company: LEXON Address: 125 avenue des Champs Elysées, 75008 Paris France Product Name: UNO MINI CHARGER Model Number: LD146 FCC Identifier: 2ARD3-LD146 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Catherine CLUZET Date: Jun.23.2021 Title: Manager Signature of applicant: 1/1

C5266091_X10_Ed.2 LEXON Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: Jun.23.2021 Subject: Request for Confidentiality FCC ID: 2ARD3-LD146 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature: Name: Catherine CLUZET Title: Manager 1/1

External Photos FCC ID: 2ARD3-LD146

Internal Photos FCC ID: 2ARD3-LD146 ANT

JianYan Testing Group Shenzhen Co., Ltd. Report No: JYTSZB-R01-2100302 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2105094 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 1 of 12 1 Cover Page RF Exposure Evaluation Report Applicant: LEXON Address of Applicant: 125 avenue des Champs Elysées, 75008 Paris France Equipment Under Test (EUT) Product Name: UNO MINI CHARGER Model No.: LD146 Trade mark: LEXON FCC ID: 2ARD3-LD146 Applicable standards: 680106 D01 RF Exposure Wireless Charging App v03r01 Date of sample receipt: 24 May., 2021 Date of Test: 25 May., to 31 May., 2021 Date of report issue: 01 Jun., 2021 Test Result: PASS* Report No: JYTSZB-R01-2100302 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2105094 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 12 2 Version Version No. Date Description 00 01 Jun., 2021 Original Tested by: Date: 01 Jun., 2021 Test Engineer Reviewed by: Date: 01 Jun., 2021 Project Engineer Report No: JYTSZB-R01-2100302 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2105094 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 12 3 Contents Page 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 GENERAL INFORMATION .................................................................................................................................. 4 4.1 CLIENT INFORMATION ........................................................................................................................................... 4 4.2 GENERAL DESCRIPTION OF E.U.T. ...................................................................................................................... 4 4.3 OPERATING MODES .............................................................................................................................................. 4 4.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................................................ 4 4.5 MEASUREMENT UNCERTAINTY ............................................................................................................................. 4 4.6 ADDITIONS TO, DEVIATIONS, OR EXCLUSIONS FROM THE METHOD ...................................................................... 4 4.7 LABORATORY FACILITY ........................................................................................................................................ 5 4.8 LABORATORY LOCATION ...................................................................................................................................... 5 4.9 TEST INSTRUMENTS LIST ....................................................................................................................................... 5 5 TECHNICAL REQUIREMENTS SPECIFICATION IN FCC CFR TITLE 47 PART 2.1091 ............................ 6 5.1 LIMITS .................................................................................................................................................................... 6 5.2 LIMITS FOR GENERAL POPULATION/UNCONTROLLED EXPOSURE ..................................................................... 6 5.3 TEST SETUP BLOCK .............................................................................................................................................. 7 5.4 TEST PROCEDURE ................................................................................................................................................. 8 5.5 RESULT .................................................................................................................................................................. 9 6 TEST SETUP PHOTO ........................................................................................................................................ 10 Report No: JYTSZB-R01-2100302 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2105094 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 4 of 12 4 General Information 4.1 Client Information Applicant: LEXON Address: 125 avenue des Champs Elysées, 75008 Paris France Manufacturer/Factory: LEXON Address: 125 avenue des Champs Elysées, 75008 Paris France 4.2 General Description of E.U.T. Product Name: UNO MINI CHARGER Model No.: LD146 Operation Frequency: 100kHz ~ 205kHz Modulation technology: MSK Antenna Type: Coil Antenna Power supply (Wireless Charger): Input: DC 5V/2A, 9V/2A, 12V/1.5A Output Wireless: 5W, 7.5W, 10W Test Sample Condition: The test samples were provided in good working order with no visible defects. 4.3 Operating Modes Operating mode Detail description Full mode Keep the EUT in Full mode Remark: 1. Pre-scan input: 9V/2A, output: 5W, 7.5W, 10W of the Power supply, found output: 10W was worse case mode. So the report only reflects the worse mode. 2…

Text truncated - open the document above for the full version.

TEST REPORT Product Name: UNO MINI CHARGER FCC ID: 2ARD3-LD146 Trademark: LEXON Model Number: LD146 Prepared For: LEXON Address: 125 avenue des Champs Elysées, 75008 Paris France Manufacturer: LEXON Address: 125 avenue des Champs Elysées, 75008 Paris France Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: Floor 1&2, Building A, No. 26 of Xinhe Road, Xinqiao Street, Baoan District, Shenzhen China Sample Received Date: May. 19, 2021 Sample tested Date: May. 19, 2021 to May. 26, 2021 Issue Date: May. 26, 2021 Report No.: CTB210526006RFX Test Standards FCC Part 15 C Test Results PASS Remark: This is wireless charger radio test report. Compiled by: Reviewed by: Approved by: Arron Liu Bin Mei Rita Xiao / Director The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 22 TABLE OF CONTENTS 1. GENERAL INFORMATION ........................................................................................ 3 1.1. Report information ................................................................................................................ 3 1.2. Measurement Uncertainty ..................................................................................................... 3 1.3. Test Facility ........................................................................................................................... 3 1.4. Test Uncertainty .................................................................................................................... 4 2. PRODUCT DESCRIPTION ......................................................................................... 5 2.1. EUT Description .................................................................................................................... 5 2.2. Block Diagram of EUT Configuration .................................................................................... 5 2.3. Test Conditions ..................................................................................................................... 5 2.4. Description Of Support Units (Conducted Mode) ................................................................. 5 3. TEST RESULTS SUMMARY ...................................................................................... 6 4. TEST EQUIPMENT USED .......................................................................................... 7 4.1. MEASUREMENT INSTRUMENTS LIST .............................................................................. 7 5. CONDUCTED EMISSION TEST ...................................................................................... 9 5.1. Block Diagram of Test Setup ................................................................................................ 9 5.2. Test Standard ........................................................................................................................ 9 5.3. Conducted Emission Limit ............................................................................................................ 9 5.4. EUT Configuration on Test ................................................................................................... 9 5.5. Operating Condition of EUT................................................................................................ 10 5.6. Test Procedure ................................................................................................................... 10 5.7. Test Result .......................................................................................................................... 10 6. RADIATED EMISSION MEASUREMENT ................................................................ 13 6.1. Block Diagram of Test Setup .............................................................................................. 13 6.2. Test Standard ..................................................................................................................... 14 6.3. EMI Test Receiver Setup .................................................................................................... 14 6.4. Test Procedure ................................................................................................................... 14 6.5. Test Result .......................................................................................................................... 14 7. OCCUPIED BANDWIDTH ........................................................................................ 18 7.1. Block Diagram of Test Setup .............................................................................................. 18 7.2. Rules and specifications ..................................................................................................... 18 7.3. Test Procedure ................................................................................................................... 18 7.4. Test Result .......................................................................................................................... 18 8. EUT TEST PHOTOS................................................................................................. 20 9. EUT PHOTOS........................................................................................................... 21 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 22 1. GENERAL INFORMATION 1.1. Report information 1.1.1.This report is not a certificate of quality; it only applies to the sample of the specific product/equipment given at the time of its testing. The results are not used to indicate or imply that they are application to the similar items. In addition, such results must not be used to indicate or …

Text truncated - open the document above for the full version.

Conducted Emission 9K-30MHz FCC ID: 2ARD3-LD146 Radiated Emission 30MHz-1GHz