2ARO3-WS6POP-UPSmartPhone

1. Using this manual Thank you for choosing Wolki mobile WS6 Pop-Up. This device will provide you with high-quality mobile communication and entertainment based on exceptional technology and high standards. This manual has been specially designed to guide you through the functions of your device. 1.1 Read me first ●Before using your device，read the entire manual to ensure safe and proper use. ●The descriptions in this manual are based on the default settings of your device. ●The contents of this manual may differ from the product, or from software provided by service providers or carriers, and are subject to change without prior notice. ●Available features and additional services may vary by device, software, or service provider. ●Formatting and delivery of this manual is based on smartphone operating system . 2.0 Insert the SIM card Insert the SIM when you need a cellular service. Do not insert a memory card into the SIM slot. 2.1 Charge the battery Before using the device for the first time or when the battery has been unused for an extended period, you must fully charge the battery. ●Use only our approved chargers and cables. Unapproved chargers or cables may cause batteries to explode or damage your device. 2.2 Insert a memory card Your device accepts Memory cards with maximum capacities of 32GB. 3. Getting started 3.1 Turn on or off your device Press and hold the Turn on/off key. 3.2 Use the touch screen Your device’s touch screen lets you easily select items or perform functions. Learn basic actions for using the touch screen. 3.3 Lock or unlock the touch screen and the keys Your device will go in standby mode when you do not use it for a specified period. To turn on the screen, press the Turn on/off key. ●to set standby time, select Settings →Display →Sleep. 3.4 Get to know the Home screen From the Home screen, you can view your device’s status and access applications. The Home screen has multiple panels. Scroll left or right to view the panels on the Home screen. Move an item on the Home screen Tap and hold an item, and then drag it to a new location. Remove an item from the Home screen Tap and hold an item, and then remove it. 3.5 Access applications Launch applications and take full advantage of features on your device. You can reorganize the application list to match your preferences, or download applications from the Internet to enhance your device’s functionality. 3.6 Launch multiple applications Your device allows you to multitask by running multiple applications at the same time. To launch multiple applications, select another application to launch from the Home screen. 4. Communication 4.1 Calling Make a call 1 In the application list, select Phone →Keypad, and then enter an area code and a phone number. 2 Select to make a voice call. 3 Select to end the call. Answer a call 1 During an incoming call, Select drag your finger to outside of the large circle then select To mute the ringtone, press the side key. 2 Select to end the call. 4.2 Messages Learn to create and send text (SMS) or multimedia (MMS) messages, and view or manage messages that you have sent or received. Send a text message 1 In the application list, select Messages → 2 Add recipients: ●Enter phone numbers manually and separate them with a semicolon or a comma. ●Select phone numbers from your call, message, or contact lists by selecting 3 Select the text field and enter your message text. 5. Entertainment 5.1 Camera Learn how to take and view photos and videos. You can take photos and record videos. Take a photo 1 In the application list, select Camera. 2 Select to take a photo. The photo is saved automatically. 5.2 Music player Learn to listen to your favorite music . Add music files to your device ● Download from the Internet. ● Download from a computer. ● Receive via BT. ● Copy to your memory card. Play music 1 In the application list, select Music. 2 Select a music category → a music file. 6. Tools 6.1 Calculator Learn to perform calculations with your device. Perform a calculation 1 In the application list, select Calculator. 2 Use the keys on the screen to perform basic calculations. 6.2 other tools : Clock, Calendar. FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause rhmaful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Specific Absorption Rate (SAR) information SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Before a new model phone is available for sale to the public, it must be tested and cert…

Text truncated - open the document above for the full version.

Reference N Waltek Tes http://www EXHIBI EUT View 1 EUT View 2 No.: WTX20X sting Group w.semtest.co T 2 - EUT 1 2 X06039808W (Shenzhen) m.cn T EXTER W-2/3/4 Co., Ltd. RNAL PH HOTOGR APHS Reference N Waltek Tes http://www EUT View 3 EUT View 4 No.: WTX20X sting Group w.semtest.co 3 4 X06039808W (Shenzhen) m.cn W-2/3/4 Co., Ltd. Reference N Waltek Tes http://www EUT View 5 EUT View 6 No.: WTX20X sting Group w.semtest.co 5 6 X06039808W (Shenzhen) m.cn W-2/3/4 Co., Ltd. Reference N Waltek Tes http://www EUT View 7 No.: WTX20X sting Group w.semtest.co 7 X06039808W (Shenzhen) m.cn W-2/3/4 Co., Ltd.

Reference N Waltek Tes http://www EXHIBI Proposed Specificatio n it is visible durable to r expected lif e Proposed No.: WTX20X sting Group w.semtest.co T 1 - PRO FCC ID La ns: The label or easily acc emain fully l etime. Label Loca X06039808W (Shenzhen) m.cn ODUCT L abel Forma shall be secu cessible to th legible and in ation on EU W-2/3/4 Co., Ltd. LABELIN at urely affixed t he user, and ntact on the UT FCC NG to a permane shall not be device in al l ID Label Lo ently attached readily detac l normal cond cation d part of the d chable. The l ditions of use device, in a lo label shall be e throughout ocation where e sufficiently t the device’s e y s

Reference N Waltek Tes http://www EXHIBI EUT Housin EUT Housi n No.: WTX20X sting Group w.semtest.co T 3 - EUT ng and Boar ng and Boar X06039808W (Shenzhen) m.cn T INTER rd View 1 rd View 2 W-2/3/4 Co., Ltd. NAL PHO OTOGRA APHS Reference N Waltek Tes http://www Solder Boa r Solder Boar No.: WTX20X sting Group w.semtest.co rd-Compone rd-Compone X06039808W (Shenzhen) m.cn ent View 1 ent View 2 W-2/3/4 Co., Ltd. Reference N Waltek Tes http://www Solder Boa r Solder Boar No.: WTX20X sting Group w.semtest.co rd-Compone rd-Compone X06039808W (Shenzhen) m.cn ent View 3 ent View 4 W-2/3/4 Co., Ltd. Reference N Waltek Tes http://www Solder Boa r Solder Boar No.: WTX20X sting Group w.semtest.co rd-Compone rd-Compone X06039808W (Shenzhen) m.cn ent View 5 ent View 6 W-2/3/4 Co., Ltd. Reference N Waltek Tes http://www Antenna V i No.: WTX20X sting Group w.semtest.co iew X06039808W (Shenzhen) m.cn W-2/3/4 Co., Ltd. GPS Ant. GSM / /WCDMA An Wi-Fi/B nt. BT Ant

Ref : ACR.233.1.17.SATU.A WALTEK TESTING GROUP (SHENZHEN) CO., LTD. 1/F, BUILDING A, HONGWEI INDUSTRIAL PARK, LIUXIAN 2ND ROAD BAO'AN DISTRICT SHENZHEN (518101), CHINA MVG COMOSAR DOSIMETRIC E-FIELD PROBE SERIAL NO.: SN 45/15 EPGO280 Calibrated at MVG US 2105 Barrett Park Dr. - Kennesaw, GA 30144 Calibration Date: 07/08/2019 Summary: This document presents the method and results from an accredited COMOSAR Dosimetric E-Field Probe calibration performed in MVG USA using the CALISAR / CALIBAIR test bench, for use with a COMOSAR system only. All calibration results are traceable to national metrology institutions. COMOSAR E-Field Probe Calibration Report COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.233.1.17.SATU.A Page: 2/10 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. Name Function Date Signature Prepared by : Jérôme LUC Product Manager 7/8/2019 Checked by : Jérôme LUC Product Manager 7/8/2019 Approved by : Kim RUTKOWSKI Quality Manager 7/8/2019 Customer Name Distribution : Waltek Testing Group (Shenzhen) Co., Ltd. Issue Date Modifications A 7/8/2019 Initial release COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.233.1.17.SATU.A Page: 3/10 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. TABLE OF CONTENTS 1 Device Under Test ..................................................................................................... 4 2 Product Description ................................................................................................... 4 2.1 General Information _______________________________________________________ 4 3 Measurement Method ................................................................................................ 4 3.1 Linearity ________________________________________________________________ 4 3.2 Sensitivity _______________________________________________________________ 5 3.3 Lower Detection Limit _____________________________________________________ 5 3.4 Isotropy _________________________________________________________________ 5 3.5 Boundary Effect __________________________________________________________ 5 4 Measurement Uncertainty .......................................................................................... 5 5 Calibration Measurement Results .............................................................................. 6 5.1 Sensitivity in air __________________________________________________________ 6 5.2 Linearity ________________________________________________________________ 7 5.3 Sensitivity in liquid ________________________________________________________ 7 5.4 Isotropy _________________________________________________________________ 8 6 List of Equipment .................................................................................................... 10 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.233.1.17.SATU.A Page: 4/10 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 1 DEVICE UNDER TEST Device Under Test Device Type COMOSAR DOSIMETRIC E FIELD PROBE Manufacturer MVG Model SSE2 Serial Number SN 45/15 EPGO280 Product Condition (new / used) New Frequency Range of Probe 0.7 GHz-6GHz Resistance of Three Dipoles at Connector Dipole 1: R1=0.193 M Dipole 2: R2=0.188 M Dipole 3: R3=0.198 M A yearly calibration interval is recommended. 2 PRODUCT DESCRIPTION 2.1 GENERAL INFORMATION MVG’s COMOSAR E field Probes are built in accordance to the IEEE 1528, OET 65 Bulletin C and CEI/IEC 62209 standards. Figure 1 – MVG COMOSAR Dosimetric E field Dipole Probe Length 330 mm Length of Individual Dipoles 2 mm Maximum external diameter 8 mm Probe Tip External Diameter 2.5 mm Distance between dipoles / probe extremity 1 mm 3 MEASUREMENT METHOD The IEEE 1528, OET 65 Bulletin C, CENELEC EN50361 and CEI/IEC 62209 standards provide recommended practices for the probe calibrations, including the performance characteristics of interest and methods by which to assess their affect. All calibrations / measurements performed meet the fore mentioned standards. 3.1 LINEARITY The evaluation of the linearity was done in free space using the waveguide, performing a power sweep to cover the SAR range 0.01W/kg to 100W/kg. COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.233.1.17.SATU.A Page: 5/10 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 3.2 SENSITIVITY The sensitivity factors of the three dipoles were determined using a two step calibration method (air and tissue simulating liquid) using waveguides as outlined in the standards. 3.3 LOWER DETECTION LIMIT The lower detection limit was assessed using the same measurement set up as used for the linearity measurement. The required lower detection limit is 10 mW/kg. 3.4 ISOTROPY The axial isotropy was evaluated by exposing the probe to a reference wave from a standard dipole with the dipole mounted under the flat phantom in the test configuration suggested for system validations and checks. The probe was rotated along its main axis from 0 - 360 degrees in 15 degree steps. The hemispherical isotropy is determined by inserting the probe in a thin plastic box filled with tissue-equivalent liquid, with the plasti…

Text truncated - open the document above for the full version.

Waltek Testing Group (Shenzhen) Co., Ltd. http://www.semtest.com.cn Page 1 of 74 TEST REPORT Reference No. .................... : WTX20X06039808W-1 FCC ID ................................ : 2ARO3-WS6POP-UP Applicant ........................... : Worldwide telecom limited Address ............................. : 2F Block C; Shenfang Building, Zhen Hualu, Futian, Shenzhen. Product Name ................... : SmartPhone Test Model. ........................ : WS6 Pop-Up Standards .......................... : FCC Part 22H, FCC Part 24E Date of Receipt sample .... : Jun.24, 2020 Date of Test........................ : Jun.24, 2020 to Jul.16, 2020 Date of Issue ..................... : Jul.16, 2020 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Tested by: Reviewed By: Approved & Authorized By: Jason Su / Project Engineer Lion Cai / RF Manager Silin Chen / Manager Reference No.: WTX20X06039808W-1 Page 2 of 74 Waltek Testing Group (Shenzhen) Co., Ltd. http://www.semtest.com.cn TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................................... 4 1.2 TEST STANDARDS ................................................................................................................................................... 6 1.3 TEST METHODOLOGY ............................................................................................................................................. 6 1.4 TEST FACILITY ....................................................................................................................................................... 6 1.5 EUT SETUP AND TEST MODE ................................................................................................................................. 7 1.6 MEASUREMENT UNCERTAINTY .............................................................................................................................. 8 1.7 TEST EQUIPMENT LIST AND DETAILS ..................................................................................................................... 9 2. SUMMARY OF TEST RESULTS ......................................................................................................................... 11 3. RF EXPOSURE ....................................................................................................................................................... 12 3.1 STANDARD APPLICABLE ....................................................................................................................................... 12 3.2 TEST RESULT........................................................................................................................................................ 12 4. RF OUTPUT POWER ............................................................................................................................................ 13 4.1 STANDARD APPLICABLE ....................................................................................................................................... 13 4.2 TEST PROCEDURE ................................................................................................................................................. 13 4.3 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 13 5. PEAK-TO-AVERAGE RATIO (PAR) OF TRANSMITTER ............................................................................. 17 5.1 STANDARD APPLICABLE ....................................................................................................................................... 17 5.2 TEST PROCEDURE ................................................................................................................................................. 17 5.3 SUMMARY OF TEST RESULTS ............................................................................................................................... 17 6. EMISSION BANDWIDTH ..................................................................................................................................... 19 6.1 STANDARD APPLICABLE ....................................................................................................................................... 19 6.2 TEST PROCEDURE ................................................................................................................................................. 19 6.3 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 19 7. OUT OF BAND EMISSIONS AT ANTENNA TERMINAL ............................................................................... 32 7.1 STANDARD APPLICABLE ....................................................................................................................................... 32 7.2 TEST PROCEDURE ................................................................................................................................................. 32 7.3 SUMMARY OF TEST RESULTS/PLOTS .................................................................................................................... 32 8. SPURIOUS RADIATE…

Text truncated - open the document above for the full version.

Waltek Testing Group (Shenzhen) Co., Ltd. http://www.semtest.com.cn Page 1 of 95 TEST REPORT Reference No. .................... : WTX20X06039808W FCC ID ................................ : 2ARO3-WS6POP-UP Applicant ........................... : Worldwide telecom limited Address ............................. : 2F Block C; Shenfang Building, Zhen Hualu, Futian, Shenzhen Product Name ................... : SmartPhone Test Model. ........................ : WS6 Pop-Up Standards .......................... : FCC Part 2.1093 ANSI / IEEE C95.1 : 2005+A1:2010 ANSI / IEEE C95.3 : 2002(R2008) IEEE 1528 :2013 Date of Receipt sample .... : Jun.24, 2020 Date of Test........................ : Jun.24, 2020 to Jul.13, 2020 Date of Issue ..................... : Jul.14, 2020 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Tested by: Reviewed By: Approved & Authorized By: Jack Sun / Project Engineer Lion Cai / RF Manager Silin Chen / Manager Reference No.: WTX20X06039808W Page 2 of 95 Waltek Testing Group (Shenzhen) Co., Ltd. http://www.semtest.com.cn TABLE OF CONTENTS 1. General Information ................................................................................................................................................... 3 1.1 Product Description for Equipment Under Test (EUT) ......................................................................................... 3 1.2 Test Standards .................................................................................................................................................... 6 1.3 Test Methodology ................................................................................................................................................ 6 1.4 Test Facility ......................................................................................................................................................... 6 2. Summary of Test Results .......................................................................................................................................... 7 3. Specific Absorption Rate (SAR) ................................................................................................................................ 8 3.1 Introduction .......................................................................................................................................................... 8 3.2 SAR Definition ..................................................................................................................................................... 8 4. SAR Measurement System ........................................................................................................................................ 9 4.1 The Measurement System .................................................................................................................................. 9 4.2 Probe ................................................................................................................................................................... 9 4.3 Probe Calibration Process ................................................................................................................................. 11 4.4 Phantom ............................................................................................................................................................ 12 4.5 Device Holder .................................................................................................................................................... 12 4.6 Test Equipment List ........................................................................................................................................... 13 5. Tissue Simulating Liquids ....................................................................................................................................... 14 5.1 Composition of Tissue Simulating Liquid ........................................................................................................... 14 5.2 Tissue Dielectric Parameters for Head and Body Phantoms ............................................................................. 15 5.3 Tissue Calibration Result ................................................................................................................................... 16 6. SAR Measurement Evaluation ................................................................................................................................ 17 6.1 Purpose of System Performance Check ............................................................................................................ 17 6.2 System Setup .................................................................................................................................................... 17 6.3 Validation Results .............................................................................................................................................. 18 7. EUT Testing Position ............................................................................................................................................... 20 7.1 Define Two Imaginary Lines on The Handset .................................................................................................... 20 7.2 Cheek Position .....................................................................................................…

Text truncated - open the document above for the full version.

Reference Waltek Tes http://www EXHIBI Radiation E Radiation E e No.: WTX20 sting Group w.semtest.co T 4 - TES Emission Tes Emission Tes 0X06039808 (Shenzhen) m.cn ST SETUP st Setup (Belo st Setup (30M 8W-1 Co., Ltd. P PHOTO ow 30MHz) MHz to 1GHz OGRAPH z) HS Reference Waltek Tes http://www Radiation E Radiation E e No.: WTX20 sting Group w.semtest.co Emission Tes Emission Tes 0X06039808 (Shenzhen) m.cn st Setup (1GH st Setup (Abo 8W-1 Co., Ltd. Hz to 18GHz ove 18GHz) z)