2ARRE-2020GA80walkie talkie

User's Manual Rev.1 Analog Radio 1 Using Tips FCC Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. Safety Information for Radios Your wireless handheld portable transceiver contains a low power transmitter. When the talk button is pushed, it sends out radio frequency (RF) signals. The device is authorized to operate at a duty factor not to exceed 50%. In August 1996, the Federal Communications 2 Using TipsUsing Tips Commissions (FCC) adopted RF exposure guidelines with safety levels for handheld wireless devices. Important FCC RF Exposure Requirements: For body-worn operation, this radio has been tested and meets the FCC RF exposure guidelines when used with accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Use only the supplied antenna. Unauthorized antennas, modifications or attachments could damage the transmitter and may violate FCC regulations. Normal Position Hold the transmitter approximately 25 mm from your face and speak in a normal voice, with the antenna pointed up and away. ISEDC Warning This product meets the applicable Industry Canada technical specifications. / Le présent matériel est conforme aux specifications techniques applicables d’Industrie Canada.This device complies with ISEDC license-exempt RSS standard (s). Operation is subject to the following two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'ISEDC applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. 3 Using TipsUsing Tips ISEDC Radiation Exposure Statement For face up operation, this model device has been tested and meets the ISED RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that Contains no metal and that positions the handset a minimum of 25mm from the face. For body worn operation, this model device has been tested and meets the ISED RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that Contains no metal. Pour une utilisation face vers le haut, ce modèle d'appareil a été testé et répond aux directives d'exposition RF ISED lorsqu'il est utilisé avec unaccessoire désigné pour ce produit ou lorsqu'il est utilisé avec unaccessoire qui ne contient pas de métal et qui positionne le combiné à au moins 25 mm du visage. Pour une utilisation sur le corps, ce modèle d'appareil a été testé et répond aux directives d'exposition RF de la ISED lorsqu'il est utilisé avec unaccessoire désigné pour ce produit ou lorsqu'il est utilisé avec un accessoire qui ne contient pas de métal. Your wireless handheld portable transceiver contains a low power transmitter. When the talk button is pushed, it sends out radio frequency (RF) signals. The device is authorized to operate at a duty factor not to exceed 50%. Votre émetteur-récepteur portable sans fil contient un émetteur de faible puissance. Lorsque le bouton de conversation est enfoncé, il envoie des signaux de radiofréquence (RF). L'appareil est autorisé à fonctionner avec un facteur d'utilisation ne dépassant pas 50%. Any Changes or modi-cations not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Tout changement ou modi-cation non expressément approuvé par la partie responsable de la conformité l'équipement. 4 Know the RadioKnow the Radio Programmable key Product Control Antenna LED Indicator PTT key Up key Down key Menu key Charging contacts Speaker Microphone Charging Port Accessory Port Power key 5 Know the RadioKnow the Radio Radio LED Indicators Radio Status Standby Low Battery Transmit (TX) Receive (RX) Programming Mode (Read from Radio) Programming Mode (Write to Radio) LED Indication Blinking Green Blinking Red Solid Red Solid Green Fast Blinking Red Fast Blinking Red 6 熟悉本机 Battery Installation 1. Use finger tip to pull the latch as shown in picture below to remove battery cover. 2. Put the battery pack into the battery compartment, close the battery cover with snap fit all latches. Ensure the battery cover is fully fix t…

Text truncated - open the document above for the full version.

QA-FR-170-B GOCOM Technology Co.,Ltd. UNIT12, 14/F, LIPPO SUN PLAZA,28 CANTON ROAD,TSIM SHA TSUI, KOWLOON, Hong Kong, China Tel: +8618750555801 Email: [email protected] Fax: 0085223744662 FCC Authorization 2021/01/14 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We ,GOCOM Technology Co.,Ltd. ,the undersigned, hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Snow Huang Sales Executive

GOCOM Technology Co.,Ltd. UNIT12, 14/F, LIPPO SUN PLAZA,28 CANTON ROAD,TSIM SHA TSUI, KOWLOON, Hong Kong, China Tel: +8618750555801 Email: [email protected] Fax: 0085223744662 FCC Confidential Authorization 2021/01/14 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2ARRE-2020GA80 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, GOCOM Technology Co.,Ltd hereby requests long-term confidential treatment of information accompanying this application as outlined below: • Block Diagram • Schematics • Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Snow Huang Sales Executive

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS Adapter 1# Adapter 2#

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Antenna

FCC PART 15B TEST REPORT For GOCOM Technology Co., Ltd. UNIT12, 14/F, LIPPO SUN PLAZA,28 CANTON ROAD TSIM SHA TSUI, KOWLOON, Hong Kong, China FCC ID: 2ARRE-2020GA80 Report Type: Original Report Product Type: walkie talkie Test Engineer Barry Yang, Jalon Liu, Joker Chen Report Number: RSZ201222008-00B Report Date: 2021-01-19 Reviewed By: Ivan Cao Assistant Manager Test Laboratory: Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSZ201222008-00B Page 2 of 32 TABLE OF CONTENTS General Information ...................................................................................................................................................... 3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 3 OBJECTIVE ................................................................................................................................................................... 3 TEST METHODOLOGY .................................................................................................................................................. 3 MEASUREMENT UNCERTAINTY .................................................................................................................................... 4 TEST FACILITY ............................................................................................................................................................. 4 DECLARATIONS ............................................................................................................................................................ 4 System Test Configuration ............................................................................................................................................ 5 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 5 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 5 EUT EXERCISE SOFTWARE .......................................................................................................................................... 5 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS ........................................................................................................ 5 SUPPORT CABLE LIST AND DETAILS ............................................................................................................................ 5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 6 TEST EQUIPMENT LIST ................................................................................................................................................. 7 ENVIRONMENTAL CONDITIONS .................................................................................................................................... 7 Sumary of Test Results .................................................................................................................................................. 8 FCC Part 15B §15.107 – Conducted emissions ........................................................................................................... 9 EUT SETUP .................................................................................................................................................................. 9 EMI TEST RECEIVER SETUP ......................................................................................................................................... 9 TEST PROCEDURE ...................................................................................................................................................... 10 CORRECTED AMPLITUDE & MARGIN CALCULATION ................................................................................................. 10 TEST DATA ................................................................................................................................................................ 10 FCC Part 15B §15.109 – Radiated emissions ............................................................................................................ 19 EUT SETUP ................................................................................................................................................................ 19 EMI TEST RECEIVER SETUP ....................................................................................................................................... 20 TEST PROCEDURE ...................................................................................................................................................... 20 CORRECTED AMPLITUDE & MARGIN CALCULATION ................................................................................................. 20 TEST DATA ................................................................................................................................................................ 20 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RSZ201222008-00B Page 3 of 32 GENERAL INFORMATION Product Description for Equipment under Test (EUT) EUT Name: walkie talkie EUT Model: GA80 Highest Operation Frequency: 467.7125 MHz Rated Input Voltage: DC 3.7V from Battery Adapter 1# Information Model: TPA-97H050055UU01 Input: 100~240V 50/60Hz 0.15A Output: 5.0V 550mA Adapter 2# Information Model: TPA-97H050100UW01 Input: 100~240V 50/60Hz 0.15A Output: 5.0V 1000mA Serial Number: RSZ201222008-RF-S1 EUT Received Date: 2020.12.23 EUT Received Status: Good Objective This report is…

Text truncated - open the document above for the full version.

EXHIBIT C - TEST SETUP PHOTOGRAPHS Conducted Emissions Front View-Adapter 1# Conducted Emissions Side View-Adapter 1# Conducted Emissions Front View-Adapter 2# Conducted Emissions Side View-- Adapter 2# Radiated Emission Below 1GHz Front View--Adapter 1# Radiated Emission Below 1GHz Rear View--Adapter 1# Radiated Emission Below 1GHz Front View--Adapter 2# Radiated Emission Below 1GHz Rear View--Adapter 2# Radiated Emission Above 1GHz Front View--Adapter 1# Radiated Emission Above 1GHz Rear View--Adapter 1# Radiated Emission Above 1GHz Front View--Adapter 2# Radiated Emission Above 1GHz Rear View—Adapter 2#