2AS3F-A1028250RF Module, 2400-2483.5 MHz

A-1028250 RF Module, 2400-2483.5 MHz User Manual RISK OF ELECTRIC SHOCK Disconnect power before installation or maintenance of the product. FCC / ISED COMPLIANCE STATEMENTS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: 1.This device may not cause interference. 2.This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteurexempt de licencecontenudans le présentappareilestconformeaux CNR d’Innovation, Sciences et DéveloppementéconomiqueCanada applicablesaux appareilsradio exempts de licence. L’exploitationestautoriséeaux deux conditions suivantes: 1.L’appareilne doitpas produirede brouillage; 2.L’appareildoitaccepter tout brouillageradioélectriquesubi, mêmesile brouillageestsusceptible d’en compromettrele fonctionnement. To satisfy FCC/ISED RF exposure requirements a separation distance of 20 cm or more must be maintained between the antenna of this device and persons during operation. Operation at closer than 20 cm is not permitted. Pour êtreconformeaux limitesd’expositionaux ondesRF des normesFCC/ISED, unedistance de séparation d’aumoins20 cm doitêtremaintenueentre l’antennede cetappareilet toutepersonnependant son opération. Mettreenopérationcetappareila unedistance plus rapprochéeque 20 cm n’estpas permis. RF Module, 2400-2483.5 MHz A-1028250 User Manual RF Module Integration Instructions ThismoduleisnotforsaleandisonlytobeusedwithinhostproductsdesignedbyCurrentLighting Solutions,LLC(themanufacturerofthemodule). ApplicableFCCRules •CFR47FCCPart15,SubpartC,15.207 •CFR47FCCPart15,SubpartC,15.209 •CFR47FCCPart15,SubpartC,15.212 •CFR47FCCPart15,SubpartC,15.247 •CFR47FCCPart2,2.1091 OperationalUseConditions Theinputvoltagetothemoduleshouldbenominally3.3VDCandtheambienttemperatureofthemodule shouldnotexceed85C. Notraceantennasareusedinthismodule.IftheRFmodule’son-boardchipantennaisnotusedinthehost product,thenthehostproduct’santennashouldonlybeinstalledwhenthehostproductismanufactured. (Theantennaisnotfieldreplaceable.)Theantennamustbeinstalledtoprovideaseparationdistanceofat least20cmfromallpersonsandmustnotbeco-locatedoroperatinginconjunctionwithanyotherantenna ortransmitter,exceptinaccordancewithFCCmulti-transmitterevaluationprocedures. RFExposure Thismodulehasbeengrantedmodularapprovalforfixedfacilityandmobileapplicationsthatmaintaina distanceof20cmfromaperson’sbody. TocomplywithFCC/ICregulationslimitingbothmaximumRFoutputpowerandhumanexposuretoRF radiation,themaximumantennagainincludingcablelossinamobile-onlyorfixedapplicationexposure conditionmustnotexceed2.5dBi. QualifiedAntennas TheradiotransmitterwithFCCID:2AS3F-A1028250andIC:25008-A1028250hasbeenapprovedby Innovation,ScienceandEconomicDevelopmentCanadatooperatewiththeantennatypeslistedbelowwith themaximumpermissiblegainindicated.Antennatypesnotincludedinthislistthathaveagaingreater thanthemaximumgainindicatedforanytypelistedarestrictlyprohibitedforusewiththisdevice. Thismodulehasbeentestedandcertifiedwiththeon-boardchipantennaandwithanexternalantenna connectedtotheRFpad(P30).Externalantennaspermittedtobeusedwiththismodulemustmeetthe followingrequirements: •Theantennamustbeoneofthefollowingtypes:chipantenna,connectorizedcoaxialPCBor connectorizedcoaxialpatchantenna •Theantennamusthaveamaximumgainof:2.5dBi •Theantennaimpedancemustbe50Ω. •Theantennamustuseauniqueantennaconnectionsuchasaminiaturizedcoaxialconnector(suchasa U.FLorIPEXconnector)oracomponentfootprintwithinaprintedcircuitboardlayout. User Manual RF Module, 2400-2483.5 MHz A-1028250 RF Module (A-1028250) External Dimensions RF Module Integration Instructions (Cont’d) AdditionalTesting Thefinalhost/modulecombinationneedstobeevaluatedagainsttheFCCPart15SubpartBcriteriafor unintentionalradiatorsinordertobeproperlyauthorizedforoperationasaPart15digitaldevice. Thehostintegratorinstallingthismoduleintotheirproductmustensurethatthefinalcompositeproduct complieswiththeFCCrequirementsbyatechnicalassessmentorevaluationtotheFCCrules,includingthe transmitteroperationandshouldrefertoguidanceinKDB996369. AdditionalInformation ThismodulemaybeusedinhostproductswithoutadditionalFCC/IC(IndustryCanada)certificationifthe hostproductsmeetthefollowingconditions.Otherwise,additionalFCC/ICapprovalsmustbeobtained. •Thehostproductwiththemoduleinstalledmustbeevaluatedforsimultaneoustransmission requirements. •Theusersmanualforthehostproductmustclearlyindicatetheoperatingrequirementsandconditions thatmustbeobservedtoensurecompliancewithcurrentFCC/ICRFexposureguidelines. •Alabelmustbeaffixedtotheoutsideofthehostproductwiththefollowingstatements: ThisdevicecontainsFCCID:2AS3F-A1028250 ThisequipmentcontainsequipmentcertifiedunderICID:25008-A1028250 Wireless Wall Dimmer (WWD2-2IW) RF Module, 2400-2483.5 MHz A-1028250 User Manual Regulatory Information FCC ID: 2AS3F-A1028250 IC: 25008-A1028250 HVIN: A1028250 FVIN: RF SDK 6.5.3.0 and above Supplier Information Name: Current Lighting Solutions, LLC Address: 1975 Noble Road, East Cleveland, OH 44112 (USA) Website: www.gecurrent.com Caution:Theuseriscautionedthatchangesormodificationsnotexpresslyapprovedbythepartyresponsible forcompliancecouldvoidtheuser’sauthoritytooperatetheequipment. Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice, pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainst harmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradio frequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmful interferencetoradioc…

Text truncated - open the document above for the full version.

1975 Noble Road, East Cleveland, Ohio 44112 www.gecurrent.com Jessica Browning Lead Power Electronics Engineer T +1 216 462 4540 [email protected] January 20, 2021 Nemko North America Inc. Attn: Director of Certification 303 River Road Ottawa, Ontario, Canada K1V 1H2 Modular Approval Letter For FCC ID: 2AS3F-A1028250, Current Lighting Solutions, LLC is seeking FCC Authorization as a ☒ Single Modular Transmitter / ☐ Single Limited Modular Transmitter The EUT meets the requirements for: ☒ Single Modular Approval / ☐ Single Limited Modular Approval as detailed in KDB 996369. Compliance to each of the requirements is described below: Modular Approval Requirement Yes No Please provide a detailed explanation if the answer is “No.” (i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. X (ii) The modular transmitter must have buffered modulation / data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. X (iii) The modular transmitter must have its own power supply regulation. X (iv) The modular transmitter must comply with the antenna and transmission system requirements of §§ 15.203, 15.204 (b) and 15.204 (c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of §§ 15.203 is not X 1975 Noble Road, East Cleveland, Ohio 44112 www.gecurrent.com applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. (v) The modular transmitter must be tested in a stand-alone configuration. X (vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. X (vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. X (viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. X Applicant’s signature _______________________________________________ Applicant’s name ___Jessica Browning______________________________ Applicant’s title ___Lead Power Electronics Engineer________________ Date ___January 20, 2021______________ Contact information and address: ___Jessica Browning__________________ ___Current Lighting Solutions, LLC___ [email protected] ___ (216) 462 4540____________________ ___1975 Noble Road_________________ ___East Cleveland, OH 44112________

1975 Noble Road, East Cleveland, Ohio 44112 www.gecurrent.com Jessica Browning Lead Power Electronics Engineer T +1 216 462 4540 [email protected] January 12, 2021 Nemko Canada Inc. 303 River Road Ottawa, ON Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY Name of Applicant: Current Lighting Solutions, LLC Address: 1975 Noble Road City: East Cleveland State: Ohio Country: USA FCC ID: 2AS3F-A1028250 IC ID: 25008-A1028250 Pursuant to Sections 0.457(d) and 0.459 of the commission’s rules and Industry of Canada Regulations stated in RSP-100 Clause 12, we hereby request that the following documents be held under confidentiality. LONG TERM: 1. Schematic Diagram 2. Block Diagram 3. Theory of Operation 4. Parts List The above information contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. Dated: January 12, 2021 Signed: Printed: Jessica Browning Title: Lead Power Electronics Engineer

www.nemko.com ARFWL (FCC & ISED MPE Exemption)).docx; Date: May, 2021 Assessment report 412895-3ARFWL Date of issue: May 13, 2021 Applicant: GE Current, a Daintree Company Product: Radio receiver Model A-1028250 FCC ID: 2AS3F-A1028250 IC ID: 25008-A1028250 Type of assessment: MPE Exemption Report Specifications:  FCC 47 CFR Part 1 Subpart I, §§1.1307, 1.1310  FCC 47 CFR Part 2 Subpart J, §2.1091  KDB 447498 D01 General RF Exposure Guidance v06  RSS-102 Issue 5 Amendment 1, (February 2021) – Annex C Choose Scandinavian trust Report reference ID: 412895-3ARFEMC Page 2 of 6 Lab and test locations Company name Nemko USA, Inc. Address 1110 Faraday Ave, Suite 150 City Carlsbad State California Postal code 92008 Country USA Telephone +1 760 444 3500 Website www.nemko.com Prepared by James Cunningham, EMC/MIL/WL Supervisor Reviewed by Juan M Gonzalez, EMC & Wireless Divisions Manager Review date May 13, 2021 Reviewer signature Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko USA’s ISO/IEC 17025 accreditation. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government Copyright notification Nemko USA Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko USA Inc. accepts no responsibility for damages, if any, suffered by any third party because of decisions made or actions based on this report. © Nemko USA Inc. Report reference ID: 412895-3ARFEMC Page 3 of 6 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Declaration ......................................................................................................................................................................................... 4 Evaluation summary ........................................................................................................................................................................... 5 2.1 MPE exemption for simultaneous transmission ................................................................................................................................................................. 5 Section 1 Declaration Report reference ID: 412895-3ARFEMC Page 4 of 6 Declaration Declaration of RF exposure compliance for exemption from routine evaluation limits: Attestation: I attest that the radiocommunication apparatus meets the exemption from the routine evaluation limits in Section 2.5 of RSS-102 standard; that the Technical Brief was prepared, and the information contained therein is correct; that the device evaluation was performed and/or supervised by me; that the applicable measurement methods and evaluation methodologies have been followed; and that the device meets the SAR and/or RF field strength limits of RSS-102. Date of issue: May 12, 2021 James Cunningham, EMC/MIL/WL Supervisor Prepared by Signature Section 2 Evaluation summary Report reference ID: 412895-3ARFEMC Page 5 of 6 Evaluation summary 2.1 MPE exemption for simultaneous transmission 2.1.1 References, definition, and limits FCC §2.1091(c) (1) Mobile devices that operate in the Commercial Mobile Radio Services pursuant to part 20 of this chapter; the Cellular Radiotelephone Service pursuant to part 22 of this chapter; the Personal Communications Services pursuant to part 24 of this chapter; the Satellite Communications Services pursuant to part 25 of this chapter; the Miscellaneous Wireless Communications Services pursuant to part 27 of this chapter; the Upper Microwave Flexible Use Service pursuant to part 30 of this chapter; the Maritime Services (ship earth station devices only) pursuant to part 80 of this chapter; the Specialized Mobile Radio Service, and the 3650 MHz Wireless Broadband Service pursuant to part 90 of this chapter; the 76-81 GHz Band Radar Service pursuant to part 95 of this chapter; and the Citizens Broadband Radio Service pursuant to part 96 of this chapter are subject to routine environmental evaluation for RF exposure prior to equipment authorization or use if: (i) They operate at frequencies of 1.5 GHz or below and their effective radiated power (ERP) is 1.5 watts or more, or (ii) They operate at frequencies above 1.5 GHz and their ERP is 3 watts or more. (2) Unlicensed personal communications service devices, unlicensed millimeter-wave devices, and unlicensed NII devices authorized under §§15.255(f), 15.257(g), 15.319(i), and 15.407(f) of this chapter are also subject to routine environmental evaluation for RF exposure prior to equipment authorization or use if their ERP is 3 watts or more or if they meet the definition of a portable device as specified in §2.1093(b) requiring evaluation under the provisions of that section. (3) All other mobile and unlicensed transmitting devices are categorically excluded from routine environmental evaluation for RF exposure prior to equipment authorization or use, except as specified in §§1.1307(c) and 1.1307(d) of this chapter. RSS-102, Section 2.5.2 RF exposure evaluation is required if the separation distance between the user and/or bystander and the device’s radiating element is greater than 20 cm, except when the device operates as follows: • below 20 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equa…

Text truncated - open the document above for the full version.

www.nemko.com FCC 47 CFR Part 15C §15.247 & RSS-247.docx; Date: July 2020 Nemko USA Inc., a testing laboratory, is accredited by NVLAP. The tests included in this report are within the scope of this accreditation. Test report 412895-1TRFWL Date of issue: May 12, 2021 Applicant: GE Current, a Daintree Company Product: Radio receiver Model: A1028250 FCC ID: 2AS3F-A1028250 IC: 25008-A1028250 Specifications:  FCC 47 CFR Part 15, Subpart C – §15.247 Operation within the bands 902 – 928 MHz, 2400 – 2483.5 MHz, 5727 – 5850 MHz  Industry Canada RSS-247, Issue 2 Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices O N E W O R L D O U R A P P R O V A L Report reference ID: 412895-1TRFWL 412895-1TRFWL Page 2 of 51 Lab and test locations Company name Nemko USA Inc. Address 2210 Faraday Ave, Suite 150 City Carlsbad State California Postal code 92008 Country USA Telephone +1 760 444 3500 Website www.nemko.com FCC Site Number Test Firm Registration Number: 392943 Designation Number: US5058 ISED Test Site 2040B-3 Tested by David Hewitt, EMC Specialist Reviewed by James Cunningham, EMC/MIL/WL Supervisor Review date May 12, 2021 Reviewer signature Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko USA’s ISO/IEC 17025 accreditation. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Copyright notification Nemko USA Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko USA Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko USA Inc. Report reference ID: 412895-1TRFWL 412895-1TRFWL Page 3 of 51 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Report summary ................................................................................................................................................................................. 4 1.1 Applicant ................................................................................................................................................................................................................................ 4 1.2 Manufacturer......................................................................................................................................................................................................................... 4 1.3 Test specifications ................................................................................................................................................................................................................. 4 1.4 Test methods ......................................................................................................................................................................................................................... 4 1.5 Exclusions ............................................................................................................................................................................................................................... 4 1.6 Statement of compliance...................................................................................................................................................................................................... 4 1.7 Test report revision history .................................................................................................................................................................................................. 4 Summary of test results ...................................................................................................................................................................... 5 2.1 FCC Part 15 Subpart C, general requirements..................................................................................................................................................................... 5 2.2 FCC Part 15.247 ..................................................................................................................................................................................................................... 5 2.3 IC RSS-247, Issue 2................................................................................................................................................................................................................. 5 2.4 IC RSS-GEN, Issue 5................................................................................................................................................................................................................ 5 Equipment under test (EUT) details ..................................................................................................................................................... 6 3.1 Sample information............................................................................................................................................................................................................... 6 3.2 EUT information ................................…

Text truncated - open the document above for the full version.

www.nemko.com FCC 47 CFR Part 15C §15.247 & RSS-247.docx; Date: July 2020 Nemko USA Inc., a testing laboratory, is accredited by NVLAP. The tests included in this report are within the scope of this accreditation. Test report 412895-2TRFWL Date of issue: May 12, 2021 Applicant: GE Current, a Daintree Company Product: Radio receiver Model: A1028250 FCC ID: 2AS3F-A1028250 IC: 25008-A1028250 Specifications:  FCC 47 CFR Part 15, Subpart C – §15.247 Operation within the bands 902 – 928 MHz, 2400 – 2483.5 MHz, 5727 – 5850 MHz  Industry Canada RSS-247, Issue 2 Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices O N E W O R L D O U R A P P R O V A L Report reference ID: 412895-2TRFWL 412895-2TRFWL Page 2 of 51 Lab and test locations Company name Nemko USA Inc. Address 2210 Faraday Ave, Suite 150 City Carlsbad State California Postal code 92008 Country USA Telephone +1 760 444 3500 Website www.nemko.com FCC Site Number Test Firm Registration Number: 392943 Designation Number: US5058 ISED Test Site 2040B-3 Tested by David Hewitt, EMC Specialist Reviewed by James Cunningham, EMC/MIL/WL Supervisor Review date May 12, 2021 Reviewer signature Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko USA’s ISO/IEC 17025 accreditation. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Copyright notification Nemko USA Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko USA Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko USA Inc. Report reference ID: 412895-2TRFWL 412895-2TRFWL Page 3 of 51 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Report summary ................................................................................................................................................................................. 4 1.1 Applicant ................................................................................................................................................................................................................................ 4 1.2 Manufacturer......................................................................................................................................................................................................................... 4 1.3 Test specifications ................................................................................................................................................................................................................. 4 1.4 Test methods ......................................................................................................................................................................................................................... 4 1.5 Exclusions ............................................................................................................................................................................................................................... 4 1.6 Statement of compliance...................................................................................................................................................................................................... 4 1.7 Test report revision history .................................................................................................................................................................................................. 4 Summary of test results ...................................................................................................................................................................... 5 2.1 FCC Part 15 Subpart C, general requirements..................................................................................................................................................................... 5 2.2 FCC Part 15.247 ..................................................................................................................................................................................................................... 5 2.3 IC RSS-247, Issue 2................................................................................................................................................................................................................. 5 2.4 IC RSS-GEN, Issue 5................................................................................................................................................................................................................ 5 Equipment under test (EUT) details ..................................................................................................................................................... 6 3.1 Sample information............................................................................................................................................................................................................... 6 3.2 EUT information ................................…

Text truncated - open the document above for the full version.

Model: A-1017508 Report reference ID: 412895-1TRFWL & 412895-2TRFWL Section 1. Test Setup Photos 1.1 Conducted emissions setup Model: A-1017508 Report reference ID: 412895-1TRFWL & 412895-2TRFWL 1.2 Radiated emissions 30 to 1000 MHz Model: A-1017508 Report reference ID: 412895-1TRFWL & 412895-2TRFWL 1.3 Radiated emissions 1 to 18 GHz Model: A-1017508 Report reference ID: 412895-1TRFWL & 412895-2TRFWL 1.4 Radiated emissions 18 to 26 GHz Model: A-1017508 Report reference ID: 412895-1TRFWL & 412895-2TRFWL 1.5 Wireless bench testing