2AS3F-WOS3PCSmart Sensor

DT041 WOS3-PC Product Overview The Daintree® Wireless Battery-Powered Ceiling Mounted Occupancy and Daylight Sensor may be deployed in a Daintree EZ Connect or Daintree Networked application. The WOS3-PC device is designed for ceiling installation on suspended ceiling tiles, or to drywall. This device is designed for energy savings based on space occupancy status and ambient light level. The communication with the Daintree system utilizes a secure and reliable wireless connection which helps minimize installation costs and complexity. BEFORE YOU BEGIN Read these instructions completely and carefully. Save these instructions for future use. IMPORTANT To ensure the product warranty is valid, please ensure all installation instructions and environmental conditions for storage and operation are complied with. Installation to be performed by factory trained or qualified personnel. Save These Instructions Use only in the manner intneded by the manufacturer. If you have any questions, contact the manufacturer. Daintree® Wireless Controls Wireless Battery-Powered Ceiling Mounted Occupancy and Daylight Sensor Installation of Back Plate onto Wall Installation Guide 2 1 2 3 4 5 Counterclockwise rotation to separate the back plate from the device. Remove the insulation sheet.emove (This step is for installing on wood or cement, if installing on drywall, jump this step.) Insert the expansion bolt into the hole. For installing on drywall, pass the screws through the installing holes on the back plate. For installing on wood or cement, screw should pass the screws and align with the hole drilled in step3. (This step is for installing on wood or cement, if installing on drywall, jump this step.) Drill a hole vertically on the wall. The hole diameter equal to the size of the expansion bolt. Daintree® Wireless Controls Wireless Battery-Powered Ceiling Mounted Occupancy and Daylight Sensor (WOS3-PC) 6 For installing on drywall, lock the screw vertically on the wall. For installing on wood or cement, lock the screw into expansion bolts. Installation Guide 3 Installation of Device onto Back Plate Install new battery. then reverse previous steps to finish the battery replacement. (Only use CR14505 for WOS3-PC) Clockwise rotation to install the device onto back plate. 1 2 Unscrew the screw 4 Align the device with back plate by positioning hole. Daintree® Wireless Controls Wireless Battery-Powered Ceiling Mounted Occupancy and Daylight Sensor (WOS3-PC) Remove the cover of battery 5 Remove the elder battery 6 Battery Replacement Mask Replacement Installation Guide 4 Product Dimensions 1 2 1 2 Put the ring into track, the Lock icon should be 10 degree to the triangle. Then clockwise rotate the ring. When triangle is pointed to the lock icon on the ring Put the mask into track, the triangle icon on mask is pointed to the triangle icon on body. Then clockwise or counter-clockwise rotate the ring. When the triangle icon on mask is 90 degree to the triangle icon on body, mask is locked. Daintree® Wireless Controls Wireless Battery-Powered Ceiling Mounted Occupancy and Daylight Sensor (WOS3-PC) Daintree® Wireless Controls Wireless Battery-Powered Ceiling Mounted Occupancy and Daylight Sensor (WOS3-PC) www.gecurrent.com © 2021 Current Lighting Solutions, LLC. All rights reserved. GE and the GE monogram are trademarks of the General Electric Company and are used under license. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. DT041-Daintree-WWD2-2IW-Wall-Dimmer-Installation-Guide Installation Guide Product Name: Wireless Battery-Powered Ceiling Mounted Occupancy and Daylight Sensor Model No: WOS3-PC Supplier's Name: Current Lighting Solutions, LLC Supplier’s Website: www.gecurrent.com Supplier’s Address (USA): Cleveland, Ohio Supplier’s Phone: 1-866-855-8629 Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. ISED RF Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparation d'au moins 20 cm doit être maintenue entre l'antenne de cet appareil ettoutes les personnes. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Daintree® Wireless …

Text truncated - open the document above for the full version.

1975 Noble Road, East Cleveland, Ohio 44112 www.gecurrent.com © 2022 Current Lighting Solutions, LLC. All rights reserved. GE is a trademark of the General Electric Company and is used under license. Jessica Browning Design Manager T +1 216 462 4540 [email protected] Date: January 4, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a)comply with the relevant provisions of the certification program; b)make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c)make claims regarding certification only in respect of the scope for which certification has been granted; d)do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e)upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; 1975 Noble Road, East Cleveland, Ohio 44112 www.gecurrent.com f)use certification only to indicate the products are certified as being in conformity with specified standards; g)endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h)ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i)keep a record of all complaints made known to us relating to the product’s compliance with requirements of the relevant standard and to make these records available when requested; j)take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k)document the actions taken. This authorization is valid until June 30, 2022. Sincerely, Company Name: Current Lighting Solutions, LLC Contact Name: Jessica Browning Address: 1975 Noble Road, East Cleveland, Ohio 44112 United States Date: January 4, 2022

1975 Noble Road, East Cleveland, Ohio 44112 www.gecurrent.com © 2022 Current Lighting Solutions, LLC. All rights reserved. GE is a trademark of the General Electric Company and is used under license. Jessica Browning Design Manager T +1 216 462 4540 [email protected] Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2AS3F-WOS3PC To Whom It May Concern: Pursua nt to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457 , 0.459 ), we are requesting the Commission to withhold the following attachments as confidential documents from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation The above mentioned documents contain detailed system and equipment description and are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitors an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format, and correspondence during the certification review process cannot be granted as confidential documents and that information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: Current Lighting Solutions, LLC Contact Name: Jessica Browning Address: 1975 Noble Road, East Cleveland, Ohio 44112 United States Date: January 4, 2022 Bom list

1975 Noble Road, East Cleveland, Ohio 44112 www.gecurrent.com © 2022 Current Lighting Solutions, LLC. All rights reserved. GE is a trademark of the General Electric Company and is used under license. Jessica Browning Design Manager T +1 216 462 4540 [email protected] DATE: January 4, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Short-Term Confidentiality Company Name: Current Lighting Solutions, LLC FCC ID: 2AS3F-WOS3PC FCC Part 15 Certification To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device. (1) Test Setup Photos (2) External Photos (3) Internal Photos (4) User Manual The applicant requests the exhibits selected above as short term confidential to be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Best Regards Company Name: Current Lighting Solutions, LLC Contact Name: Jessica Browning Address: 1975 Noble Road, East Cleveland, Ohio 44112 United States Date: January 4, 2022

External Photographs Page 2 of 3 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . View of EUT-1 View of EUT-2 Page 3 of 3 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . View of EUT-3 View of EUT-4

LA6660010V1.0 2021.10.27
( ) WOS3-PC WOS3-PC FW:11106760 MAC: XXXXXXXXXXX XXXXX ：  )$  + )%）$） %）$ : Segoe UI9 9mm Z: (MAC AddressI: (Install Code 32CRC Code4G$M: Model IDD: Description M: Manufacturer CodeL: Label TypeQR Code0:unit, 1: Fixture, 2: Plan Model Number: WOS3-PC Description: WOS3-PC MAC Address: 00228110040040B1 Install code: 84D11AD42530CF42450C37C7BB762DC6 CRC: EDFF QR CodeUnit Z:00228110040040B1$I:84D11AD42530CF42450C37C7BB762DC6EDFF%G$M:WOS3-PC$D:WOS3-PC%M:103A$L:0 ，!"#& * ,!"'./;<=>? !"@H （（ （（） :   : ： JKV XMAC11 5pt， 58pt WOS3-PC Wireless Battery-Powered C eiling Mounted O ccupancy a nd D aylight Sensor FCC I D: 2AS3F-WOS3PC IC: 25008-WOS3PC FCC P art 15 C lass B CAN I CES-003(B) / N MB-003(B) Ratings i n Volts: 3V DC Operating T emperature R ange: -10°C t o 4 0°C 93149829 YYYYMMDD Current Lighting S olutions, LLC www.gecurrent.com Made i n China For assistance c all 1-866-855-8629 ATTENTION:RISQUE D’EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UN TYPE INCORRECT.SUIVRE LA RECOMMANDATION DU FABRICANT POUR JETEZ LES BATTERIES USAGÉES. CE PRODUIT EST SEULEMENT COMPATIBLE AVEC LES BATTERIES LITHIUM CR14505 3V. N’UTILISEZ AUCUN AUTRE TYPE DE BATTERIE DANS CE PRODUIT. CAUTION:RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. THIS PRODUCT IS ONLY COMPATIBLE WITH 3V LITHIUM CR14505 BATTERIES. DO NOT USE ANY OTHER TYPE OF BATTERY IN THIS PRODUCT. ： ， YX.Segoe UI4.5pt \] 4mm 4.5mm 5.5mm 6.5mm 5mm !"^_

Internal Photographs Page 2 of 3 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-1 Internal View of EUT-2 Page 3 of 3 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-3 Internal View of EUT-4 Antenna

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. This report does not imply that the product(s) has met the criteria for certification. FCC RF EXPOSURE REPORT For Smart sensor MODEL NUMBER: WOS3-PC FCC ID: 2AS3F-WOS3PC REPORT NUMBER: 4790205296.1-3 ISSUE DATE: December 10, 2021 Prepared for Current Lighting Solutions, LLC 1975 Noble Road, East Cleveland, Ohio 44112 United States Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Building 10, Innovation Technology Park, No. 1, Li Bin Road, Song Shan Lake Hi-Tech Development Zone, Dongguan, People’s Republic of China Tel: +86 769-22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT No.: 4790205302.1-3 Page 2 of 6 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 3 2. TEST METHODOLOGY ..................................................................................................... 4 3. FACILITIES AND ACCREDITATION ................................................................................. 4 4. EQUIPMENT UNDER TEST ............................................................................................... 5 4.1. DESCRIPTION OF EUT .............................................................................................. 5 5. REQUIREMENT ................................................................................................................. 6 REPORT No.: 4790205302.1-3 Page 3 of 6 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: Current Lighting Solutions, LLC Address: 1975 Noble Road, East Cleveland, Ohio 44112 United States Manufacturer Information Company Name: Current Lighting Solutions, LLC Address: 1975 Noble Road, East Cleveland, Ohio 44112 United States EUT Information EUT Name: Smart sensor Model: WOS3-PC Sample Received Date: December 2, 2021 Sample Status: Normal Sample ID: 4439891 Date of Tested: December 2, 2021~ December 9, 2021 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC 47CFR§2.1091 KDB-447498 D01 V06 PASS Prepared By: Checked By: Kebo Zhang Shawn Wen Project Engineer Laboratory Leader Approved By: Stephen Guo Laboratory Manager REPORT No.: 4790205302.1-3 Page 4 of 6 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 2. TEST METHODOLOGY The tests documented in this report were performed in accordance with KDB 447498 D01 General RF Exposure Guidance v06. 3. FACILITIES AND ACCREDITATION Accreditation Certificate A2LA (Certificate No.: 4102.01) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been assessed and proved to be in compliance with A2LA. FCC (FCC Designation No.: CN1187) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. Has been recognized to perform compliance testing on equipment subject to the Commission's Delcaration of Conformity (DoC) and Certification rules ISED(Company No.: 21320) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been registered and fully described in a report filed with Industry Canada. The Company Number is 21320. VCCI (Registration No.: G-20019, R-20004, C-20012 and T-20011) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been assessed and proved to be in compliance with VCCI, the Membership No. is 3793. Facility Name: Chamber D, the VCCI registration No. is G-20019 and R-20004 Shielding Room B , the VCCI registration No. is C-20012 and T-20011 Note 1: All tests measurement facilities use to collect the measurement data are located at Building 10, Innovation Technology Park, Song Shan Lake Hi tech Development Zone, Dongguan, 523808, China Note 2: The test anechoic chamber in UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch had been calibrated and compared to the open field sites and the test anechoic chamber is shown to be equivalent to or worst case from the open field site. Note 3: For below 30MHz, lab had performed measurements at test anechoic chamber and comparing to measurements obtained on an open field site. And these measurements below 30MHz had been correlated to measurements performed on an OFS. REPORT No.: 4790205302.1-3 Page 5 of 6 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 4. EQUIPMENT UNDER TEST 4.1. DESCRIPTION OF EUT EUT Name Smart sensor Model WOS3-PC Product Description Operation Frequency 2405 MHz ~ 2480 MHz Modulation Type Data Rate O-QPSK 250kbps Rated Input DC 3 V REPORT No.: 4790205302.1-3 Page 6 of 6 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 5. REQUIREMENT LIMIT Limits for General Population/Uncontrolled Exposure Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Fi…

Text truncated - open the document above for the full version.

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. CFR 47 FCC PART 15 SUBPART C ISED RSS-247 ISSUE 2 CERTIFICATION TEST REPORT For Smart sensor MODEL NUMBER: WOS3-PC FCC ID: 2AS3F-WOS3PC IC: 25008-WOS3PC REPORT NUMBER: 4790205296.1-1 ISSUE DATE: December 10, 2021 Prepared for Current Lighting Solutions, LLC 1975 Noble Road, East Cleveland, Ohio 44112 United States Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Building 10, Innovation Technology Park, No. 1, Li Bin Road, Song Shan Lake Hi- Tech Development Zone Dongguan, 523808, People’s Republic of China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4790205296.1-1 Page 2 of 64 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0087 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Revision History Rev. Issue Date Revisions Revised By V0 12/10/2021 Initial Issue REPORT NO.: 4790205296.1-1 Page 3 of 64 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0087 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Summary of Test Results Clause Test Items FCC/ISED Rules Test Results 1 6dB Bandwidth and 99% Occupied Bandwidth FCC Part 15.247 (a) (2) RSS-247 Clause 5.2 (a) ISED RSS-Gen Clause 6.7 Pass 2 Peak Conducted Output Power FCC Part 15.247 (b) (3) RSS-247 Clause 5.4 (d) Pass 3 Power Spectral Density FCC Part 15.247 (e) RSS-247 Clause 5.2 (b) Pass 4 Conducted Bandedge and Spurious Emission FCC Part 15.247 (d) RSS-247 Clause 5.5 Pass 5 Radiated Bandedge and Spurious Emission FCC Part 15.247 (d) FCC Part 15.209 FCC Part 15.205 RSS-247 Clause 5.5 RSS-GEN Clause 8.9 Pass 6 Antenna Requirement FCC Part 15.203 RSS-GEN Clause 6.8 Pass Note: 1.This test report is only published to and used by the applicant, and it is not for evidence purpose in China. 2. The measurement result for the sample received is <Pass> according to < CFR 47 FCC PART 15 SUBPART C >< ISED RSS-247 > when <Accuracy Method> decision rule is applied. REPORT NO.: 4790205296.1-1 Page 4 of 64 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0087 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 6 2. TEST METHODOLOGY ..................................................................................................... 7 3. FACILITIES AND ACCREDITATION ................................................................................. 7 4. CALIBRATION AND UNCERTAINTY ................................................................................ 8 4.1. MEASURING INSTRUMENT CALIBRATION .............................................................. 8 4.2. MEASUREMENT UNCERTAINTY ............................................................................... 8 5. EQUIPMENT UNDER TEST ............................................................................................... 9 5.1. DESCRIPTION OF EUT .............................................................................................. 9 5.2. CHANNEL LIST ........................................................................................................... 9 5.3. MAXIMUM PEAK OUTPUT POWER ........................................................................... 9 5.4. TEST CHANNEL CONFIGURATION ........................................................................... 9 5.5. THE WORSE CASE POWER SETTING PARAMETER ............................................... 9 5.6. DESCRIPTION OF AVAILABLE ANTENNAS .............................................................10 5.7. DESCRIPTION OF TEST SETUP ...............................................................................11 6. MEASURING INSTRUMENT AND SOFTWARE USED ....................................................12 7. ANTENNA PORT TEST RESULTS ...................................................................................14 7.1. ON TIME AND DUTY CYCLE .....................................................................................14 7.2. 6 dB DTS BANDWIDTH AND 99 % OCCUPIED BANDWIDTH ..................................15 7.3. CONDUCTED OUTPUT POWER ...............................................................................17 7.4. POWER SPECTRAL DENSITY ..................................................................................18 7.5. CONDUCTED BANDEDGE AND SPURIOUS EMISSIONS ........................................20 8. RADIATED TEST RESULTS .............................................................................................22 8.1. RESTRICTED BANDEDGE ........................................................................................28 8.2. SPURIOUS EMISSIONS (1 GHz ~ 3 GHz) .................................................................31 8.3. SPURIOUS EMISSIONS (3 GHz ~ 18 GHz) ...............................................................37 8.4. SPURIOUS EMISSIONS (18 GHz ~ 26 GHz) .............................................................43 8.5. SPURIOUS EMISSIONS (30 MHz ~ 1 GHz) ...............................................................45 8.6. SPURIOUS EMISSIONS BELOW 30 MHz .................................................................47 9. ANTENNA REQUIREMENTS ..................…

Text truncated - open the document above for the full version.

Appendix II Setup Photographs RADIATED RF MEASUREMENT SETUP (ABOVE 1 GHz) MEASUREMENT POSITION (X axis) MEASUREMENT POSITION (Y axis) MEASUREMENT POSITION (Z axis) RADIATED RF MEASUREMENT SETUP (30MHz~1GHz)