2ASAF-MODULE201WFBLE.Module

WFBLE.Module Product Specification Shenzhen Eybond Co., Ltd. All rights reserve WFBLE.Module Product Specification Shenzhen Eybond Co.,Ltd （All rights reserved） WFBLE.Module Product Specification Shenzhen Eybond Co., Ltd. All rights reserve Version Modification content ModifierDate Remarks 1.0 First Release Ivanliu2022- 10-27 WFBLE.Module Product Specification Shenzhen Eybond Co., Ltd. All rights reserve CATALOG WFBLE.Module .......................................................................................................................................... 1 （All rights reserved） .............................................................................................................................. 1 1. Product Overview ................................................................................................................................ 4 2. Application circuit .................................................................................................................................. 6 2.1.2 Power supply ............................................................................................................................... 6 2.1.3 Antenna layout requirements .......................................................................................................... 6 3. FCC Regulatory notices ........................................................................................................................ 7 Modification statement ....................................................................................................................... 7 2.4 Limited module procedures .......................................................................................................... 8 compliance .................................................................................................................................. 9 2.6 RF exposure considerations ........................................................................................................ 9 2.7 Antennas .................................................................................................................................... 10 standalone .............................................................................................................................................. 10 WFBLE.Module Product Specification Shenzhen Eybond Co., Ltd. All rights reserve 5 1. Product Overview WFBLE.DTU.Module is suitable for expanding the Wi Fi transmission channel of devices. This product has the characteristics of fast speed and free application. It is connected to the device's data processing board through a serial port, with strong anti-interference ability, and supports remote control, debugging, and upgrading functions of the device; Connect to cloud servers with a router. We can provide users with a low-cost, visualized, and remotely operable complete monitoring solution. There are currently three options available: onboard antennas, IPEX sockets (2nd generation), and ANT Wi Fi/BT, and different adaptation schemes can be selected according to different needs. Pin Definition WFBLE.Module Product Specification Shenzhen Eybond Co., Ltd. All rights reserve 5 Pin Pin Name describe 1 ANT Wi Fi/BLE antenna, the antenna position needs to be avoided, and there should be no metal or copper skin 2 GND Module logically 3 WDI Watchdog feed dog output pin, outputting a 1Hz square wave signal 4 BUZZER/DL The buzzer outputs, and when powered on, it will output a high level for 2 seconds per module program download port. 5 SRV SRV indicator light, power on, output low level for 2 seconds, pulled low when connected to the serve r 6 NET NET indicator light, power on, output low level for 2 seconds, pulled low when connected to the networ k 7 COM COM indicator light, powered on and output low level for 2 seconds, pulled low after communication with the device. 8 RXD TTL serial level input pin 9 TXD TTL serial level output pin 10 RST Reset parameter pins, low level active 11 VDD33 Power supply 3.3V WFBLE.Module Product Specification Shenzhen Eybond Co., Ltd. All rights reserve 2. Application circuit Note: The IO port of the module is 3.3V. If the external level does not match, a level conversion circuit needs to be added. 2.1.2 Power supply (1) Recommended 3.3V voltage, peak current above 500mA (2) Suggest using LDO power supply; If using DC-DC, it is recommended to control the ripple within 30mV. 2.1.3 Antenna layout requirements (1) There are two recommended installation locations on the motherboard: Option 1: Place the module on the edge of the motherboard and extend the antenna area beyond the edge of the motherboard. Option 2: Place the module on the edge of the motherboard, and excavate an area at the antenna position along the motherboard edge. (2) In order to meet the performance of onboard antennas, it is prohibited to place metal parts around the antenna and keep them away from high-frequency devices. WFBLE.Module Product Specification Shenzhen Eybond Co., Ltd. All rights reserve 3. FCC Regulatory notices Modification statement Shenzhen Eybond Co., Ltd has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. Interference statement This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. RF exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The antenna should be installed and operated with minimum distance of 20cm between the radiator and your body. Antenna gain must be below 3 dBi. This transmitter must not be co-located or operating in conjunction with any othe…

Text truncated - open the document above for the full version.

Shenzhen Eybond Co., Ltd 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Shenzhen Eybond Co., Ltd Address: Building 10, Zhiheng Science &Technology Park, Nantou Street, Nanshan District, Shenzhen City, Guangdong Province, China Product Name: WFBLE.Module FCCID: 2ASAF-MODULE201 Model(s): WFBLE.Module-201, WFBLE.Module-101, WFBLE.Module-301, BLE.Module-101, BLE.Module-201, BLE.Module-301, Wi-Fi.Module-101, Wi-Fi.Module-201, Wi-Fi.Module-301 2.911(d)(5)(i) Equipment Type We, [Shenzhen Eybond Co., Ltd] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Mencius meng Date: Jun. 27, 2023 Signature: Title and Company name: Manager / Shenzhen Eybond Co., Ltd NOTE 1 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Eybond Co., Ltd 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Shenzhen Eybond Co., Ltd Address: Building 10, Zhiheng Science &Technology Park, Nantou Street, Nanshan District, Shenzhen City, Guangdong Province, China Product Name: WFBLE.Module FCCID: 2ASAF-MODULE201 Model(s): WFBLE.Module-201, WFBLE.Module-101, WFBLE.Module-301, BLE.Module-101, BLE.Module-201, BLE.Module-301, Wi-Fi.Module-101, Wi-Fi.Module-201, Wi-Fi.Module-301 2.911(d)(5)(ii) Applicant filing We, [Shenzhen Eybond Co., Ltd] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to §1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Mencius meng Date: Jun. 27, 2023 Signature: Title and Company name: Manager / Shenzhen Eybond Co., Ltd NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

ShenzhenEybondCo.,Ltd 2.911(d)(7)USAAgentv1.4 Section2.911(d)(7)USAAgentforServiceofProcess Companyname:ShenzhenEybondCo.,Ltd Address:Building10,ZhihengScience&TechnologyPark,NantouStreet,Nanshan District,ShenzhenCity,GuangdongProvince,China ProductName:WFBLE.Module FCCID:2ASAF-MODULE201 Model(s):WFBLE.Module-201,WFBLE.Module-101,WFBLE.Module-301, BLE.Module-101,BLE.Module-201,BLE.Module-301,Wi-Fi.Module-101, Wi-Fi.Module-201,Wi-Fi.Module-301 2.911(d)(7)USADesignatedAgentforServiceofProcess We,[ShenzhenEybondCo.,Ltd](“theapplicant”)designate[BaihetianInnovative Solutions] NOTE1 forthepurposeofacceptingserviceofprocessonbehalfofthe applicant. Applicantconsent:Weacknowledgeourconsenttoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipment,andatthephysicalU.S. addressandemailaddressofthedesignatedagentandacknowledgeour acceptanceofourobligationtomaintainanagentforserviceofprocessintheUnited Statesfornolessthanoneyearaftereitherwethegranteehavepermanently terminatedallmarketingandimportationoftheapplicableequipmentwithintheU.S., orattheconclusionofanyCommission-relatedadministrativeorjudicialproceeding involvingtheequipment,whicheverislater. Agentobligation:Weacknowledgeourobligationtoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipmentatourphysicalU.S. addressandemailaddressfornolessthanoneyearaftereitherthegranteehas permanentlyterminatedallmarketingandimportationoftheapplicableequipment withintheU.S.,orattheconclusionofanyCommission-relatedadministrativeor judicialproceedinginvolvingtheequipment,whicheverislater. USAAgent Companyname:BaihetianInnovative Solutions USAAddress:6837ChaseRd Dearborn,MI48126 FRNNumber:0033401605 ContactName:KennethYoung TelephoneNo:313-395-3113 Email:[email protected] Applicant Companyname:ShenzhenEybondCo., Ltd Address:Building10,ZhihengScience &TechnologyPark,NantouStreet, NanshanDistrict,ShenzhenCity, GuangdongProvince,China FCCGranteeCode:2ASAF ContactName:Menciusmeng TelephoneNo:0755-89992588 Email:[email protected] Signature: Title: Signature: Title:Manager Date:2023.06.21Date:2023.06.21 ShenzhenEybondCo.,Ltd 2.911(d)(7)USAAgentv1.4 NOTE1:AnapplicantlocatedintheUnitedStatesmaydesignateitselfastheagentforservice ofprocess. Reference;FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Shenzhen Eybond Co., Ltd Agent Authorization Company: Shenzhen Eybond Co., Ltd Address: Building 10, Zhiheng Science &Technology Park, Nantou Street, Nanshan District, Shenzhen City, Guangdong Province, China Product Name: WFBLE.Module Model Number(s): WFBLE.Module-201, WFBLE.Module-101, WFBLE.Module-301, BLE.Module-101, BLE.Module-201, BLE.Module-301, Wi-Fi.Module-101, Wi-Fi.Module-201, Wi-Fi.Module-301 Product Description: WFBLE.Module We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Jun. 27, 2023 Name: Mencius meng Title: Manager Company: Shenzhen Eybond Co., Ltd

Shenzhen Eybond Co., Ltd FCC Modular Approval Request Rev 3.0 Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Subject; Modular Transmitter Application Company name: WFBLE.Module FCC ID: 2ASAF-MODULE201 Dear Sir/Madam, This letter includes the FCC application requirements for Modular Transmitter Approval Request for;- FCC KDB 996369 D01 ‘Module Certification Guide v02; and FCC KDB 996369 D03 OEM Manual v01 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Equip Auth Guide v02’. FCC ID: 2ASAF-MODULE201 has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. Yes, the modular has own shielding cover. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. Yes, The modular transmitter have buffered modulation/data inputs. The module must contain power supply regulation on the module. Yes, The modular transmitterhave its own power supply regulation. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). Yes, The modular transmitter comply with the antenna requirements of Section 15.203 and 15.204(c). The antenna either be permanently attached. The module must demonstrate compliance in a stand-alone configuration. Yes, The module can be configured independently and meets the requirements The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). Yes, The FCC ID on the product: 2ASAF- MODULE201 The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. Yes, The module complies fully with the operating requirements of Part 15 section as demonstrated in the test report. The module must comply with RF exposure requirements Yes, The modular transmitter complies with this requirement, please refer to RF exposure report. Shenzhen Eybond Co., Ltd FCC Modular Approval Request Rev 3.0 Integration Instructions for host product manufacturers The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of requirements and Checklist. Refer to the KDB for description of the complete requirements; KDB Ref Sect Requirements of KDB 996369 D03 User Manual Page Number reference 2.2 List of applicable FCC rules P8 2.3 Summarize the specific operational use conditions P8 2.4 Limited module procedures P8 2.5 Trace antenna designs P9 2.6 RF exposure considerations P9 2.7 Antennas P10 2.8 Label and compliance information P10 2.9 Information on test modes and additional testing requirements P10 2.10 Additional testing, Part 15 Subpart B disclaimer P11 Name: Mencius meng Date: Jun. 27, 2023 Title: Manager Signature of applicant:

Shenzhen Eybond Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jun. 27, 2023 Subject; Request for Confidentiality FCC ID: 2ASAF-MODULE201 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software security requirement In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Mencius meng Title: Manager

Shenzhen Eybond Co., Ltd Model Difference Declaration To Whom It May Concern, We, Shenzhen Eybond Co., Ltd (WFBLE.Module); Trade Mark: Eybond, Model Number: WFBLE.Module-201, WFBLE.Module-101, WFBLE.Module-301, BLE.Module-101, BLE.Module-201, BLE.Module-301, Wi-Fi.Module-101, Wi-Fi.Module-201, Wi-Fi.Module-301; All model’s the function, software and electric circuit are the same, only with model named different. Test sample model: WFBLE.Module-201. Please contact me if you have any question. Signature: Date: Jun. 27, 2023 Name: Mencius meng Title: Manager

Annex A External Photos Model No.: WFBLE.Module-201 Page 1 of 3 Model No.: WFBLE.Module-201 Page 2 of 3 Model No.: WFBLE.Module-201 Page 3 of 3

FCC ID LABEL: Ca: 2mm x 6mm Label Location FCC ID: 2ASAF-MODULE201

Annex B Internal Photo Model No.: WFBLE.Module-201 Page 1 of 2 Antenna Model No.: WFBLE.Module-201 Page 2 of 2

MPE ESTIMATION FCC ID: 2ASAF-MODULE201 1,Per FCC Part 2.1091 Radiofrequency radiation exposure evaluation: mobile devices, the limit for General Population/ Uncontrolled Exposures Frequency Power density (mW/ cm 2 ) Averaging time(minutes) 300MHz----1.5GHz F/1500 30 1.5GHz---100GHz 1.0 30 Note: F= Frequency in MHz 2, Estimation Result The certified sample is portable device, when the minimum test separation distance is >20 cm, a distance of 20 cm is applied to determine RF Exposure test exclusion. The test exclusion threshold is 0.035789 mW/cm² which is< 1.0mW/cm², RF Exposure testing is not required. -------The End------- Mode Frequency (MHz) Max PK Output power(dBm) Tune Up Power(dBm) Max Tune Up power(mW) Antenna Gain(dBi) Antenna Gain (linear) MPE ( mW/cm²) BLE 2440 -1.47 -1±1(0) 1.00 1.55 1.429 0.000284 2.4g wifi 2412 20.32 20±1(21) 125.89 1.55 1.429 0.035789 Note: Note: The estimation distance is 20cm Note: PK Output power= conducted power. Conducted power see the test report HK2304251651-1E/2E , antenna gain=1.55dBi

Shenzhen Sheng Ye-technology Co.Ltd 2.4G-Antenna Test Report Client Name Frequency Band 2.4G Product Name 2.4G Antenna Version V1.0 Customer’s Part Number Part Number RF Designer Shun Wang RF Manager Shun Wang Structural Designer Hairuan Wu Date 2023.06.08 Client confirmation: Whether the product meets your requirements? □ OK □ NG The information provided by us should be kept strictly confidential, and it is not allowed to disclose to anyone else or other companies, without prior written consent ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐  1.Pa rameters Te s t parameters Product Name 2.4G AntennaModel Name WIFI-2.4G Electrical Specifications Frequency Range 2.4-2.48GHZ Polarization linear polarization Input Impedance 50Ω Radiation direction Omnidirectional VSWR ≦2.0 Power Capacity 10W Gain 1.55 dBi Bandwidth 80MHZ Mechanical Specifications Dimensions Radome Color Connector Cable Length Radome Material PCB+CU Storage Temperature -10°C-+70°C Working Temperature -30°C-+70°C Relative Humidity 40~85% The information provided by us should be kept strictly confidential, and it is not allowed to disclose to anyone else or other companies, without prior written consent ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐  2. Network analyzer test report S11 DATA (VSWR, Return loss, Smith) The information provided by us should be kept strictly confidential, and it is not allowed to disclose to anyone else or other companies, without prior written consent ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐  2D, 3D Radiation Pattern in Darkroom The information provided by us should be kept strictly confidential, and it is not allowed to disclose to anyone else or other companies, without prior written consent ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐  Gain and efficiency Frequency/MhzEfficiency / %MaxGain/dBi 2400 35.48 0.76 2420 39.08 1.55 2440 40.93 1.42 2460 41.02 1.32 2480 40.74 1.27 2500 38.99 1.26 The information provided by us should be kept strictly confidential, and it is not allowed to disclose to anyone else or other companies, without prior written consent ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐  3. OTA Test Data Band Channel TRP(dbm)TIS(dbm) 802.11b : 11MBps 1 17.1 6 17.9 1 17.8 -88.8 802.11g : 54MBps 1 12.7 6 13.1 11 13.5 -75.6 802.11n : MCS7 1 12.5 6 13.3 11 13.3 -71.0 The information provided by us should be kept strictly confidential, and it is not allowed to disclose to anyone else or other companies, without prior written consent ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐  4.Match Circuit The information provided by us should be kept strictly confidential, and it is not allowed to disclose to anyone else or other companies, without prior written consent ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐  5.Test Equipment The information provided by us should be kept strictly confidential, and it is not allowed to disclose to anyone else or other companies, without prior written consent ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐  6.Environmental reliability experiment report Item Test condition Specification Storage environment Tested temperature, humidity and air pressure as following without specifying: 1. The temperature is -30 ~ + 80 °C°C 2. Relative humidity is 45% -85% 3. The air pressure is 86kpa-106kpa The electrical mechanical performance is normal High and low temperature test Perform 5 cycles between 70 and 40 , then °C°C check the appearance quality, under normal conditions 1-2H The size should meet the requirements for mechanical and electrical performance Resistant to constant heat and humidity Test Relative humidity: 95 ± 3%, Test temperature: 40 . After continuous 2H running, take out the °C sample, and measure its electrical properties within 5 minutes, put the sample in a normal condition for another 1-2H, check the appearance qu…

Text truncated - open the document above for the full version.

Page 1 of 61 Report No.: HK2306152503-1E FCC TEST REPORT Test report On Behalf of Shenzhen Eybond Co., Ltd For WFBLE.Module Model No.: WFBLE.Module-201, WFBLE.Module-101, WFBLE.Module-301, BLE.Module-101, BLE.Module-201, BLE.Module-301, Wi-Fi.Module-101, Wi-Fi.Module-201, Wi-Fi.Module-301 FCC ID: 2ASAF-MODULE201 Prepared For : Shenzhen Eybond Co., Ltd Building 10, Zhiheng Science &Technology Park, Nantou Street, Nanshan District, Shenzhen City, Guangdong Province, China Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Jun. 08, 2023 ~ Jun. 21, 2023 Date of Report: Jun. 21, 2023 Report Number: HK2306152503-1E Applicant’s Address .... Manufact u Address .... Product d e Trade Mark Product na Model and / Standards This public Shenzhen H material. S assume liab to its placem Date of Tes Date (s) of Date of Iss u Test Result s name ..... .................. ure's Name .................. escription k: me .............. /or type refe ................. ation may b HUAK Testi Shenzhen H bility for dam ment and c st ............... performan c ue .............. .................. Te s Te c Aut TES ............ : S ............ : B N ............ : S ............ : B N E ...............: W erence : W B W ............ : F A be reproduc ing Technol HUAK Testi mages resu ontext. .................. ce of tests ... .................. .................. sting Engine chnical Man thorized Sig ST RESU Shenzhen E Building 10, Nanshan Dis Shenzhen E Building 10, Nanshan Dis Eybond WFBLE.Mod WFBLE.Mod BLE.Module Wi-Fi.Modul FCC Rules a ANSI C63.10 ced in whol ogy Co., Lt ing Techno ulting from t .......... : .......... : J .......... : J .......... : P eer : nager : gnatory : Page 2 of 6 ULT CER Eybond Co., , Zhiheng strict, Shen Eybond Co., , Zhiheng strict, Shen dule dule-201, W e-101, BLE. e-101, Wi- F and Regulat 0: 2013 e or in par t d. is acknow ology Co., L the reader's un. 08, 2023 un. 21, 2023 ass 61 RTIFICAT Ltd Science & T zhen City, G Ltd Science & T zhen City, G WFBLE.Mod Module-201 Fi.Module-2 tions Part 15 t for non-co wledged as Ltd. takes s interpretat 3 ~ Jun. 21, 3 (Gary Qi a (Eden H u (Jason Zho Report N TION Technology Guangdong Technology Guangdong dule-101, W 1, BLE.Mod 201, Wi-Fi.M 5 Subpart C ommercial p copyright o no respons ion of the re 2023 an) u) ou) No.: HK2304 y Park, Na g Province, C y Park, Na g Province, C WFBLE.Modu dule-301, Module-301 C Section 15 purposes as owner and s sibility for eproduced 4251651-1E ntou Stree China ntou Stre e China ule-301, 5.247 s long as th source of th and will n o material du et, et, e e ot e Page 3 of 61 Report No.: HK2304251651-1E TABLE OF CONTENTS 1. TEST RESULT SUMMARY ........................................................................ 5 1.1. TEST PROCEDURES AND RESULTS ............................................................................................... 5 1.2. INFORMATION OF THE TEST LABORATORY ................................................................................ 5 1.3. MEASUREMENT UNCERTAINTY ..................................................................................................... 6 2. EUT DESCRIPTION ................................................................................... 7 2.1. GENERAL DESCRIPTION OF EUT ................................................................................................... 7 2.2. CARRIER FREQUENCY OF CHANNELS ..................................................................................................... 8 2.3. OPERATION OF EUT DURING TESTING .......................................................................................... 8 2.4. DESCRIPTION OF TEST SETUP ....................................................................................................... 9 3. ENERA INFORMATION ........................................................................... 10 3.1. TEST ENVIRONMENT AND MODE ................................................................................................. 10 …

Text truncated - open the document above for the full version.