2ASK3ASC-6285TUltra Micro Drone/Ultra Micro Helicopter

THIS PACKAGE CONTAINS: Colors and styles may slightly vary. WARNING: Never leave product charging unattended for extended periods of time. Always disconnect helicopter from charger immediately after the helicopter is fully charged. Please refer to enclosed safety instructions. Made in China Spare Rotor Blades 11 AC-1009USB Charging Cord Remote Control CHOKING HAZARD - Small parts. Not suitable for children under 3 years. WARNING! INSTRUCTION BOOKLET Instruction Booklet Ascend Aeronautics™ is the registered trademark of Amax Group USA, LLC. AMAX Group USA Address: 12645 Memorial Dr Suite F1 #388 Houston, TX 77024 © 2021 All Rights Reserved. visit us at www.amaxbrands.com with Gesture Control Technology ULTRA MICRO HELI AC-1009 Distributed by: TRACTOR SUPPLY COMPANY 5401 VIRGINIA WAY BRENTWOOD, TN 37027 For customer support, call: 1-888-376-9601 www.TractorSupply.com C012-USA-V1.0 ARTWORK NO.DESCRIPTIONMDSERDESIGNERDAT E IM.ai110 x 173MMJohnny FCC Part 15 C Notice CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Conforms to safety requirements of ASTM, FCC and CPSIA. 1 TABLE OF CONTENTS Features..........................................................................................1 Charging the Remote Control.....................................................................2 Charging the Helicopter..........................................................................2 Helicopter diagram, Remote Control diagram.....................................................3 Preparing for Flight ..............................................................................4 Syncing your Helicopter...........................................................................4 Calibrating the AC-1009..........................................................................5 Automatically Take Off / Land.....................................................................5 Flight Controls.................................................................................... 5 Part Replacement Instructions....................................................................7 Gyro-Stabilized 3CH wireless indoor helicopter propeller system..................................7 Replacing connecting rod ........................................................................7 Replacing the Upper Propeller Blade..............................................................8 Replacing the Bottom Propeller Blade............................................................8 Helicopter warning and safety precautions .......................................................9 Battery Warnings,Care and Maintenance.........................................................9 Limited 90-Day Warranty........................................................................10 FCC Information.................................................................................11 FEATURES • World’s Smallest 3CH RC Helicopter • 6 Axis Gyro Auto Stabilization • Automatic Altitude Lock • One-Button Auto Start and Land • New Intuitive Gesture Motion Controller (Included) • Rechargeable Lipoly Battery. 2 Thank you for purchasing the AC-1009 2.4GHz Motion Controlled Helicopter. Please read this instruction booklet carefully as it contains valuable information on how to properly fly and care for your helicopter. CHARGING THE REMOTE CONTROL 1. Make sure the Controller’s power switch is OFF and remove protection cover. (see diagram A ). 2. Plug the USB to your computer’s USB port or a USB wall charger (see diagram B). 3 . The red LED lights on the CONTROLLER turns solid when charging is complete. Note: If the red LED lights flashing indicate the controller is under charging process. 4. The charging time will vary depending on the percentage of battery already charged. The average charging time is approximately 60 minutes. CHARGING THE HELICOPTER 1. Make sure the helicopter’s power switch is in the “OFF” position and plug the USB charging cord into the charging socket of the helicopter(see diagram C ). 2 . Connect the USB end of the cable to your computer’s USB port or a USB wall charger (see diagram D). 3 . The red LED on the USB plug lights up when charging is complete (See diagram E). Note: If the red LED lights up, either the charging is complete or the USB plug is not properly connected. 4. The charging time will vary depending on the percentage of battery already charged. The average charging time is approximately 30-40 minutes( via 5.0V 2A USB wall charger). The helicopter operates for approximately 4 minutes…

Text truncated - open the document above for the full version.

AMAX INDUSTRIAL GROUP CHINA CO., LTD Date: 2021-4-9 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ASK3ASC-6285T To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with AMAX INDUSTRIAL GROUP CHINA CO., LTD This authorization is valid until further written notice from the applicant. Print Name: Nancy Chen Title: Manager Signature: On behalf of Company: AMAX INDUSTRIAL GROUP CHINA CO., LTD Telephone: 13422877086 E-mail: [email protected]

Date: 2021-3-31 To: Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 From: AMAX INDUSTRIAL GROUP CHINA CO., LTD Regarding: Confidentiality Request regarding application for FCC ID: 2ASK3ASC-6285T LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date whichever is less. If the device is marketed within confidential period, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Print Name: Nancy Chen Title: Manager Signature: On behalf of Company: AMAX INDUSTRIAL GROUP CHINA CO., LTD Telephone: 13422877086 E-mail: [email protected]

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name AMAX INDUSTRIAL GROUP CHINA CO., LTD Address OFFICE NO.3 10/F WITTY COMMERCIAL BUILDING 1A-1L TUNG CHOI STREET MONGKOK KOWLOON HONG KONG Grantee Code 2ASK3 FCC ID 2ASK3ASC-6285T Authorized Contact Name Nancy Chen Contact Email [email protected] Contact Phone 13422877086 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 2021-4-9 Print Name: Nancy Chen Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Title: Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 External Photos for SZCR2103020022ET FCC ID: 2ASK3ASC-6285T SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4

23MM 25MM FCC ID: 2ASK3ASC-6285T This device complie s with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Amax Industrial Group China Co. Limited 852.3962.5160 Model Number: ASC-6285 783107-03-21 Dongguan,China

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 Internal Photos for SZCR2103020022ET FCC ID: 2ASK3ASC-6285T SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210302002202 Page: 1 of 41 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2103020022ET(SGS SZ No:T52110240072EM) Applicant: AMAX INDUSTRIAL GROUP CHINA CO., LTD Address of Applicant: OFFICE NO.3 10/F WITTY COMMERCIAL BUILDING 1A-1L TUNG CHOI STREET MONGKOK KOWLOON HONG KONG China Manufacturer: AMAX INDUSTRIAL GROUP CHINA CO., LTD Address of OFFICE NO.3 10/F WITTY COMMERCIAL BUILDING 1A-1L TUNG CHOI STREET MONGKOK KOWLOON HONG KONG Equipment Under Test (EUT): EUT Name: Ultra Micro Drone/Ultra Micro Helicopter Model No.: VL-6232, VL-6233. VL-6234, ASC-6285, ASC-6214   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Requested Age Grading: 8+ FCC ID: 2ASK3ASC-6285T Standard(s) : 47 CFR Part 15, Subpart C 15.249 Date of Receipt: 2021-03-15 Date of Test: 2021-03-16 to 2021-03-17 Date of Issue: 2021-03-18 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210302002202 Page: 2 of 41 Revision Record Version Chapter Date Modifier Remark 01 2021-03-18 Original Authorized for issue by: Gebin Sun/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210302002202 Page: 3 of 41 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.249 N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result 20dB Bandwidth 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.9 47 CFR Part 15, Subpart C 15.215 Pass Field Strength of the Fundamental Signal (15.249(a)) 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.5&6.6 47 CFR Part 15, Subpart C 15.249(a) Pass Restricted Band Around Fundamental Frequency 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.249(d) & 15.209 Pass Radiated Emissions 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.4&6.5&6.6 47 CFR Part 15, Subpart C 15.209 & 15.249 (a),(d) Pass Remark: Model No.: VL-6232, VL-6233. VL-6234, ASC-6285, ASC-6214 Only the model VL-6233 was tested, since according to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for all the above models, with only difference on color. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210302002202 Page: 4 of 41 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 6 4.1 DETAILS OF E.U.T. ............................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 6 4.3 MEASUREMENT UNCERTAINTY .............................................................................................................. 6 4.4 TEST LOCATION .................................................................................................................................... 7 4.5 TEST FACILITY ...................................................................................................................................... 7 4.6 DEVIATION FROM STANDARDS ............................................................................................................... 7 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 7 5 EQUIPMENT LIST ...................................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 10 6.1 ANTENNA REQUIREMENT .................................................................................................................... 10 6.1.1 Test Requirement: ....................................................................................................................... 10 6.1.2 Conclusion ................................................................................................................................... 10 7 RADIO SPECTRUM MATTER TEST RESULTS ..................................................................................... 11 7.1 20DB BANDWIDTH .............................................................................................................................. 11 7.1.1 E.U.T. Operation .......................................................................................................................... 11 7.1.2 Test Mode Description ................................................................................................................. 11 7.1.3 Test Setup Diagram ..................................................................................................................... 11 7.1.4 Measurement Procedure and Data............................................................................................. 11 7.2 FIELD STRENGTH OF THE FUNDAMENTAL SIGNAL (15.249(A)) ...........…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Setup Photos for SZCR2103020022ET FCC ID: 2ASK3ASC-6285T SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 Photographs Field Strength of the Fundamental Signal (15.249(a)) Restricted Band Around Fundamental Frequency SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3 Radiated Emissions