2ASK3RB-6283TSMART BOTSRECHARGEABLE INFRARED SNAKE/RC Snake-Large

FCC Part 15 B Notice CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Product may vary slightly from photograph. INSTRUCTION MANUAL PACKAGE CONTAINS: Wireless Infrared Controller Instruction BookletR/C Snake Warning: roboratler snake is an infrared snake. Due to the interference of the sun, the infrared signal can not work in the daytime. Refer to the attached safety instructions. 9 NOTE: THIS SNAKE IS BUILT FOR INDOOR USE ONLY AND WILL ONLY WORK ON SMOOTH AND FLAT SURFACES. PLAYING WITH THIS PRODUCT OUTDOORS OR ON A CARPET MAY PERMANENTLY DAMAGE THIS PRODUCT. FOR BEST RESULTS, ALWAYS POINT THE TRANSMITTER DIRECTLY TOWARDS THE HEAD OF THE SNAKE FROM WITHIN A FIVE FOOT RADIUS. INFRARED BEAMS DO NOT BOUNCE OF BLACK/DARK MATTE SURFACES AND MAY AFFECT TRANSMISSIONS FROM CONTROLLER. Made in China C012-USA-V1.0 KEEP THIS PACKAGE FOR REFERENCE AS IT CONTAINS IMPORTANT INFORMATION. Conforms to safety requirements of ASTM, CPSIA, and FCC. Distributed by: TRACTOR SUPPLY COMPANY 5401 VIRGINIA WAY BRENTWOOD, TN 37027 For customer support, call: 1-888-376-9601 www.TractorSupply.com This product is manufactured by Amax Group 12645 Memorial Drive, Suite F1, #388, Houston, TX 77024 Smart Bots™ are the registered trademarks of Amax Group © 2021 All rights reserved. Visit us at www.amaxbrands.com RECHARGEABLE Infrared SNAKE ARTWORK NO.DESCRIPTIONMDSERDESIGNERDAT E C12112×172mmJohnny2020/4/08 Transmitter Batteries Installation Product battery installation 1. Use a Phillips head screwdriver to unscrew battery cover at the back of the transmitter. In an counterclockwise direction, open the battery cover (Fig.1). 2. Place 2 “AAA” batteries ( not included) according to the polarity (Fig.2). 3. Close the battery cover, use the screwdriver to screw it in clockwise direction (Fig.3). 1. Screw off the battery cover on the back of the toy with a crosshead screwdriver. Open the battery cover counterclockwise (Fig. 4). 2. Place 4 “AAA” batteries ( not included) according to the polarity (Fig. 5). 3. Close the battery cover and screw it in clockwise with a screwdriver (Fig. 6). (Fig. 1) (Fig. 4)(Fig. 5)(Fig. 6) (Fig. 2)(Fig. 3) Features • Realistic Slithering Motion • Egg Shaped Remote Controller • NEW Interactive Pet Mode Automatically Engages Pets • NEW Sensors In The Eyes Detect Walls And Other Obstacles Thank you for purchasing the ROBORATTLER Remote Control Snake. The RoboRattler is an exciting action toy that requires user participation to properly control the snake. Please read this instruction booklet as it contains valuable information on how to properly use and care for your Snake. Start by ensuring that the snake is fully charged and new batteries have been properly installed in the snake’s included wireless "egg" shaped controller. TABLE OF CONTENTS Features.................................................................................1 Transmitter Batteries Installation.......................................................2 Product battery installation..............................................................2 RC Snake Diagram......................................................................3 Remote Control Diagram................................................................3 Playing with Your Snake.................................................................4 Invisible Leash Mode....................................................................4 Interactive/pet Mode.....................................................................4 Basic Controls...........................................................................5 Adjusting the Trim.......................................................................5 Battery Warnings........................................................................6 Care and Maintenance..................................................................6 Limited 90-Day Warranty................................................................7 FCC Part 15 B Notice....................................................................9 12 NOTE: THIS R/C TOY SNAKE IS BUILT FOR INDOOR USE ONLY AND WILL ONLY WORK ON SMOOTH AND FLAT SURFACES. PLAYING WITH THIS PRODUCT OUTDOORS OR ON A CARPET MAY PERMANENTLY DAMAGE THIS PRODUCT. RC Snake Diagram Remote Control Diagram Bottom ON/OFF Switch Wheel infrared sensor Functional indicator Mode Turn left key (Additional adjustment function Key) Forward/Pause key (Additional adjustment function Key) Turn right key (Additional adjustment function Key) (Fig. 8) (Fig. 9) Playing with Your Snake …

Text truncated - open the document above for the full version.

AMAX INDUSTRIAL GROUP CHINA CO., LTD Date: 2021/3/17 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by: Company Name: AMAX INDUSTRIAL GROUP CHINA CO., LTD Contact Name: Nancy Chen Title of Person：QA Manager Address: OFFICE NO.3 10/F WITTY COMMERCIAL BUILDING 1A-1L TUNG CHOI STREET MONGKOK KOWLOON HONG KONG

AMAX INDUSTRIAL GROUP CHINA CO., LTD Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2ASK3RB-6283T To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: AMAX INDUSTRIAL GROUP CHINA CO., LTD Contact Name: Nancy Chen Title of Person：QA Manager Address: OFFICE NO.3 10/F WITTY COMMERCIAL BUILDING 1A-1L TUNG CHOI STREET MONGKOK KOWLOON HONG KONG Date: 5/7/2021

AMAX INDUSTRIAL GROUP CHINA CO., LTD Address: OFFICE NO.3 10/F WITTY COMMERCIAL BUILDING 1A-1L TUNG CHOI STREET MONGKOK KOWLOON HONG KONG Confirmation Letter We, AMAX INDUSTRIAL GROUP CHINA CO., LTD The product: SMART BOTSRECHARGEABLE INFRARED SNAKE/RC Snake-Large FCC ID: 2ASK3RB-6283T And model No.: RB-6283/1638228 1638228 have the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical construction with RB-6283.The difference lies only the model number. (Signature) ___________

Appendix I External Photographs Page 2 of 2 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. View of EUT-1 View of EUT-2

FCC ID: 2ASK3RB-6283T This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 56.5mm 6.3mm

Appendix II Internal Photographs Page 2 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-1 Internal View of EUT-2 Page 3 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-3 Internal View of EUT-4 Antenna Page 4 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-5

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. CFR 47 FCC PART 15 SUBPART C TEST REPORT For SMART BOTSRECHARGEABLE INFRARED SNAKE/RC Snake-Large MODEL NUMBER: RB-6283, 1638228 FCC ID: 2ASK3RB-6283T REPORT NUMBER: 4789910828-2 ISSUE DATE: April 28, 2021 Prepared for AMAX INDUSTRIAL GROUP CHINA CO.,LTD OFFICE NO.3 10/F WITTY COMMERCIAL BUILDING 1A-1L TUNG CHOI STREET MONGKOK KOWLOON HONG KONG Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Building 10, Innovation Technology Park, No. 1, Li Bin Road, Song Shan Lake Hi- Tech Development Zone Dongguan, 523808, People’s Republic of China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4789910828-2 Page 2 of 49 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0058 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Revision History Rev. Issue Date Revisions Revised By V0 04/28/2021 Initial Issue REPORT NO.: 4789910828-2 Page 3 of 49 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0058 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Summary of Test Results Clause Test Items FCC/ISED Rules Test Results 1 20dB Bandwidth and 99% Occupied Bandwidth CFR 47 FCC §15.215 (c) Pass 2 Radiated Emission CFR 47 FCC §15.249 (a)(d)(e) CFR 47 FCC §15.205 and §15.209 Pass 3 Conducted Emission Test for AC Power Port FCC Part 15.207 Not Applicable (Note 3) 4 Antenna Requirement CFR 47 FCC §15.203 Pass Note 1: This test report is only published to and used by the applicant, and it is not for evidence purpose in China. Note 2: The measurement result for the sample received is <Pass> according to < CFR 47 FCC PART 15 SUBPART C > when <Accuracy Method> decision rule is applied. Note 3: The EUT was power by battery and can’t be charged. REPORT NO.: 4789910828-2 Page 4 of 49 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0058 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS .................................................................................... 5 2. TEST METHODOLOGY ........................................................................................................ 6 3. FACILITIES AND ACCREDITATION .................................................................................... 6 4. CALIBRATION AND UNCERTAINTY .................................................................................. 7 4.1. MEASURING INSTRUMENT CALIBRATION ................................................................ 7 4.2. MEASUREMENT UNCERTAINTY ................................................................................. 7 5. EQUIPMENT UNDER TEST ................................................................................................. 8 5.1. DESCRIPTION OF EUT ................................................................................................. 8 5.2. MAXIMUM FIELD STRENGTH ...................................................................................... 8 5.3. CHANNEL LIST .............................................................................................................. 8 5.4. DESCRIPTION OF AVAILABLE ANTENNAS ................................................................ 8 5.5. TEST CHANNEL CONFIGURATION ............................................................................. 9 5.6. THE WORSE CASE POWER SETTING PARAMETER ................................................. 9 5.7. DESCRIPTION OF TEST SETUP ................................................................................ 10 5.8. MEASURING INSTRUMENT AND SOFTWARE USED .............................................. 11 6. ANTENNA PORT TEST RESULTS .................................................................................... 12 6.1. ON TIME AND DUTY CYCLE ...................................................................................... 12 6.2. 20 dB BANDWIDTH AND 99% OCCUPIED BANDWIDTH .......................................... 14 7. RADIATED TEST RESULTS .............................................................................................. 18 7.1. LIMITS AND PROCEDURE ......................................................................................... 18 7.2. RESTRICTED BANDEDGE AND FIELD STRENGTH OF INTENTIONAL EMISSIONS 24 7.3. SPURIOUS EMISSIONS (1 ~ 3 GHz) .......................................................................... 30 7.4. SPURIOUS EMISSIONS (3 ~ 18 GHz) ........................................................................ 36 7.5. SPURIOUS EMISSIONS (18 ~ 26 GHz) ...................................................................... 42 7.6. SPURIOUS EMISSIONS BELOW 30 MHz .................................................................. 44 7.7. SPURIOUS EMISSIONS BELOW 1GHz AND ABOVE 30 MHz .................................. 47 8. ANTENNA REQUIREMENTS ............................................................................................. 49 REPORT NO.: 4789910828-2 Page 5 of 49 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0058 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 1. ATTESTATION OF TEST RE…

Text truncated - open the document above for the full version.

Appendix III Setup Photographs Radiated Disturbance below 1 GHz and above 30 MHz Radiated Disturbance below 30 MHz RADIATED RF MEASUREMENT SETUP (Above 1G – X axis) RADIATED RF MEASUREMENT SETUP (Above 1G – Y axis) RADIATED RF MEASUREMENT SETUP (Above 1G – Z axis)