2ATOW-TD-E2123Face Recognition Access Control Terminal

2 Megapixel Face Recognition Access Control Terminal TD-E2123 User Manual Please read this instruction carefully before operating the unit and keep it for further reference Face Recognition &Access Control Terminal User Manual Notes on Safety  This product is intended to be supplied by a Listed Power Unit, marked with 'Limited Power Source', 'LPS' on unit, output rated minimum 12V/1 A, no more than 2000m altitude of operation and Tma=60 Deg.C.  Do not attempt to disassemble the camera; in order to prevent electric shock, do not remove screws or covers.  There are no user-serviceable parts inside. Please contact the nearest service center as soon as possible if there is any failure.  Avoid from incorrect operation, shock vibration, heavy pressing which can cause damage to product.  Do not use corrosive detergent to clean main body of the camera. If necessary, please use soft dry cloth to wipe dirt; for hard contamination, use neutral detergent. Any cleanser for high grade furniture is applicable.  Avoid aiming the camera directly towards extremely bright objects, such as, sun, as this may damage the image sensor.  Please follow the instructions to install the camera. Do not reverse the camera, or the reversing image will be received.  Do not operate it in case temperature, humidity and power supply are beyond the limited stipulations.  Keep away from heat sources such as radiators, heat registers, stove, etc.  Do not expose the product to the direct airflow from an air conditioner.  This manual is for using and managing the product. We may reserve the rights of amending the typographical errors, inconsistencies with the latest version, software upgrades and product improvements, interpretation and modification. These changes will be published in the latest version without special notification.  All pictures, charts, images in this manual are only for description and explanation of our products. In this manual, the trademarks, product names, service names, company names, products that are not owned by our company are the properties of their respective owners.  This manual is suitable for face recognition &access control terminal. Face Recognition &Access Control Terminal User Manual Disclaimer  With regard to the product with internet access, the use of product shall be wholly at your own risks. Our company shall be irresponsible for abnormal operation, privacy leakage or other damages resulting from cyber attack, hacker attack, virus inspection, or other internet security risks; however, our company will provide timely technical support if necessary.  Surveillance laws vary from country to country. Check all laws in your local region before using this product for surveillance purposes. We shall not take the responsibility for any consequences resulting from illegal operations. Cybersecurity Recommendations  Use a strong password. At least 8 characters or a combination of characters, numbers, and upper and lower case letters should be used in your password.  It is recommended to change the service default ports (like HTTP-80, HTTPS-443, etc.) to reduce the risk of outsiders being able to access.  It is recommended to set the firewall of your router. But note that some important ports cannot be closed (like HTTP port, HTTPS port, Data Port).  It is not recommended to expose the device to the public network. When it is necessary to be exposed to the public network, please set the external hardware firewall and the corresponding firewall policy.  It is not recommended to use the v1 and v2 functions of SNMP.  In order to enhance the security of WEB client access, please create a TLS certificate to enable HTTPS.  Use black and white list to filter the IP address. This will prevent everyone, except those specified IP addresses from accessing the system.  If you add multiple users, please limit functions of guest accounts.  If you enable UPnP, it will automatically try to forward ports in your router or modem. It is really very convenient for users, but this will increase the risk of data leakage when the system automatically forwards ports. Disabling UPnP is recommended when the function is not used in real applications.  Check the log. If you want to know whether your device has been accessed by unauthorized users or not, you can check the log. The system log will show you which IP addresses were used to log in your system and what was accessed. Face Recognition &Access Control Terminal User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 1. FCC compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. 2. FCC conditions:  This device complies with part 15 of the FCC Rules. Operation of this product is subject the following two conditions:  This device may not cause harmful interface.  This devi…

Text truncated - open the document above for the full version.

FCCID:2ATOW-TD-E2123 FCCID:2ATOW-TD-E2123

FCCID:2ATOW-TD-E2123 FCCID:2ATOW-TD-E2123 FCCID:2ATOW-TD-E2123 FCCID:2ATOW-TD-E2123

ShenzhenHuaxiaTestingTechnologyCo.,Ltd 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V03 ReportTemplateRevisionDate:Mar.1st,2017 RFExposureEvaluationReport *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove. Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonlytothesample(s) tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.:CQASZ20210600844E-03 Applicant:SHENZHENTVTDIGITALTECHNOLOGYCO.,LTD. AddressofApplicant:23rdFloorBuildingB4Block9,ShenzhenBayscienceandtechnology ecologicalgarden,NanshanDistrict,Shenzhen,P.R.China EquipmentUnderTest(EUT): Product:FaceRecognitionAccessControlTerminal AllModelNo.:TD-E2123-IC/PE/TP/WF,TD-E2123-PE/TP/WF,TD-E2123-IC/ID/PE/TP/WF TestModelNo.:TD-E2123-IC/PE/TP/WF BrandName:TVT FCCID: 2ATOW-TD-E2123 Standards: 47CFRPart1.1307 47CFRPart1.1310 KDB447498D01GeneralRFExposureGuidancev06 DateofTest:2021-06-08to2021-06-30 DateofIssue:2021-06-30 TestResult:PASS* TestedBy： (LewisZhou) ReviewedBy: ( JunLi ) ApprovedBy: (JackAi) ShenzhenHuaxiaTestingTechnologyCo.,Ltd ReportNo.:CQASZ20210600844E-03 Page:2of9 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20210600844E-03Rev.01 Initialreport 2021-06-30 ShenzhenHuaxiaTestingTechnologyCo.,Ltd ReportNo.:CQASZ20210600844E-03 Page:3of9 2Contents Page 1VERSION......................................................................................................................................................................2 2CONTENTS..................................................................................................................................................................3 3GENERALINFORMATION........................................................................................................................................4 3.1CLIENTINFORMATION................................................................................................................................................4 3.2GENERALDESCRIPTIONOF2.4GWIFI......................................................................................................................4 3.3GENERALDESCRIPTIONOFNFC................................................................................................................................5 4RFEXPOSUREEVALUATION.................................................................................................................................6 4.1RFEXPOSURECOMPLIANCEREQUIREMENT..............................................................................................................6 4.1.1StandardRequirement..................................................................................................................................6 4.1.2Limits................................................................................................................................................................6 4.2EUTRFEXPOSUREEVALUATION..............................................................................................................................7 ShenzhenHuaxiaTestingTechnologyCo.,Ltd ReportNo.:CQASZ20210600844E-03 Page:4of9 3GeneralInformation 3.1ClientInformation Applicant: SHENZHENTVTDIGITALTECHNOLOGYCO.,LTD. AddressofApplicant: 23rdFloorBuildingB4Block9,ShenzhenBayscienceandtechnology ecologicalgarden,NanshanDistrict,Shenzhen,P.R.China Manufacturer: SHENZHENTVTDIGITALTECHNOLOGYCO.,LTD. AddressofManufacturer: 23rdFloorBuildingB4Block9,ShenzhenBayscienceandtechnology ecologicalgarden,NanshanDistrict,Shenzhen,P.R.China Factory:HUIZHOUTVTDIGITALTECHNOLOGYCO.,LTD. AddressofFactory:TVTIndustryPark,No.2XingKeRd.(E),DongjiangHi-TechIndustry Park,ZhongkaiHi-TechDistrict,Huizhou 3.2GeneralDescriptionof2.4GWIFI ProductName: FaceRecognitionAccessControlTerminal ModelNo.: TD-E2123-IC/PE/TP/WF,TD-E2123-PE/TP/WF,TD-E2123-IC/ID/PE/TP/WF TestModelNo.: TD-E2123-IC/PE/TP/WF TradeMark: TVT Hardwareversion： 1.4 Softwareversion： 5.0.1.0(20707) OperationFrequency:IEEE802.11b/g/n(HT20):2412MHzto2462MHz IEEE802.11n(HT40):2422MHzto2452MHz ChannelNumbers: IEEE802.11b/g,IEEE802.11nHT20:11Channels IEEE802.11nHT40:7Channels ChannelSeparation: 5MHz TypeofModulation: IEEEfor802.11b:DSSS(CCK,DQPSK,DBPSK) IEEEfor802.11g:OFDM(64QAM,16QAM,QPSK,BPSK) IEEEfor802.11n(HT20andHT40):OFDM(64QAM,16QAM, QPSK,BPSK) TransferRate: IEEEfor802.11b: 1Mbps/2Mbps/5.5Mbps/11Mbps IEEEfor802.11g: 6Mbps/9Mbps/12Mbps/18Mbps/24Mbps/36Mbps/48Mbps/54Mbps IEEEfor802.11n(HT20): 6.5Mbps/13Mbps/19.5Mbps/26Mbps/39Mbps/52Mbps/58.5Mbps/65Mbps IEEEfor802.11n(HT40): 13.5Mbps/27Mbps/40.5Mbps/54Mbps/81Mbps/108Mbps/121.5Mbps/135Mbps ProductType:MobilePortableFixLocation TestSoftwareofEUT: RFtest AntennaType:internalantenna AntennaGain:2dBi PowerSupply:DC12V/1A ShenzhenHuaxiaTestingTechnologyCo.,Ltd ReportNo.:CQASZ20210600844E-03 Page:5of9 3.3GeneralDescriptionofNFC OperationFrequency:13.56MHz ModulationType:ASK ProductType:MobilePortableFixLocation AntennaType:PCBantenna AntennaGain:0dBi ShenzhenHuaxiaTestingTechnologyCo.,Ltd ReportNo.:CQASZ20210600844E-03 Page:6of9 4RFExposureEvaluation 4.1RFExposureComplianceRequirement 4.1.1StandardRequirement AccordingtoKDB447498D01GeneralRFExposureGuidancev06 4.3.1.StandaloneSARtestexclusionconsiderations UnlessspecificallyrequiredbythepublishedRFexposureKDBprocedures,standalone1-ghead orbodyand10-gextremitySARevaluationforgeneralpopulationexposureconditions,bymeasurement ornumericalsimulation,isnotrequiredwhenthecorrespondingSARExclusionThresholdcondition, listedbelow,issatisfied. 4.1.2Limits AccordingtoFCCPart1.1310:Thecriterialistedinthefollowingtableshallbeusedtoevaluatethe environmentimpactofhumanexposuretoradiofrequency(RF)radiationasspecifiedinpart1.1307(b) F=FrequencyinMHz FriisFormula Friistransmissionformula:Pd=(Pout*G)/(4*Pi*R 2 ) Where Pd=p…

Text truncated - open the document above for the full version.

ShenzhenHuaxiaTestingTechnologyCo.,Ltd 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V03 ReportTemplateRevisionDate:Mar.1st,2017 TestReport *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove. Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonlytothesample(s) tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. 1Coverpage ReportNo.: CQASZ20210600844E-01 Applicant:SHENZHENTVTDIGITALTECHNOLOGYCO.,LTD. AddressofApplicant:23rdFloorBuildingB4Block9,ShenzhenBayscienceandtechnology ecologicalgarden,NanshanDistrict,Shenzhen,P.R.China EquipmentUnderTest(EUT): Product:FaceRecognitionAccessControlTerminal AllModelNo.:TD-E2123-IC/PE/TP/WF,TD-E2123-PE/TP/WF,TD-E2123-IC/ID/PE/TP/WF TestModelNo.:TD-E2123-IC/PE/TP/WF BrandName:TVT FCCID:2ATOW-TD-E2123 Standards:47CFRPart15,SubpartC DateofTest:2021-06-08to2021-06-30 DateofIssue:2021-06-30 TestResult:PASS* TestedBy： (LewisZhou) ReviewedBy: (JunLi) ApprovedBy: (JackAi) . ShenzhenHuaxiaTestingTechnologyCo.,Ltd ReportNo.:CQASZ20210600844E-01 Page:2of86 2Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20210600844E-01Rev.01 Initialreport 2021-06-30 ShenzhenHuaxiaTestingTechnologyCo.,Ltd ReportNo.:CQASZ20210600844E-01 Page:3of86 3TestSummary TestItemTestRequirementTestmethodResult AntennaRequirement 47CFRPart15,SubpartCSection 15.203/15.247(c) ANSIC63.102013PASS ACPowerLine Conducted Emission 47CFRPart15,SubpartCSection 15.207 ANSIC63.102013PASS ConductedPeak& AverageOutputPower 47CFRPart15,SubpartCSection 15.247(b)(3) ANSIC63.102013PASS 6dBOccupied Bandwidth 47CFRPart15,SubpartCSection 15.247(a)(2) ANSIC63.102013PASS PowerSpectralDensity 47CFRPart15,SubpartCSection 15.247(e) ANSIC63.102013PASS Band-edgeforRF ConductedEmissions 47CFRPart15,SubpartCSection 15.247(d) ANSIC63.102013PASS RFConductedSpurious Emissions 47CFRPart15,SubpartCSection 15.247(d) ANSIC63.102013PASS RadiatedSpurious Emissions 47CFRPart15,SubpartCSection 15.205/15.209 ANSIC63.102013PASS Restrictedbandsaround fundamentalfrequency (RadiatedEmission) 47CFRPart15,SubpartCSection 15.205/15.209 ANSIC63.102013PASS ShenzhenHuaxiaTestingTechnologyCo.,Ltd ReportNo.:CQASZ20210600844E-01 Page:4of86 4Contents Page 1COVERPAGE..............................................................................................................................................................1 2VERSION.......................................................................................................................................................................2 3TESTSUMMARY.........................................................................................................................................................3 4CONTENTS...................................................................................................................................................................4 5GENERALINFORMATION........................................................................................................................................5 5.1CLIENTINFORMATION.............................................................................................................................................5 5.2GENERALDESCRIPTIONOFEUT...........................................................................................................................5 5.3TESTENVIRONMENTANDMODE............................................................................................................................8 5.4DESCRIPTIONOFSUPPORTUNITS........................................................................................................................9 5.5TESTLOCATION......................................................................................................................................................9 5.6TESTFACILITY........................................................................................................................................................9 5.7STATEMENTOFTHEMEASUREMENTUNCERTAINTY............................................................................................10 5.8DEVIATIONFROMSTANDARDS.............................................................................................................................10 5.9ABNORMALITIESFROMSTANDARDCONDITIONS.................................................................................................10 5.10OTHERINFORMATIONREQUESTEDBYTHECUSTOMER..................................................................................10 5.11EQUIPMENTLIST.................................................................................................................................................11 6TESTRESULTSANDMEASUREMENTDATA..................................................................................................12 6.1ANTENNAREQUIREMENT......................................................................................................................................12 6.2CONDUCTEDEMISSIONS......................................................................................................................................13 6.3CONDUCTEDPEAK&AVERAGEOUTPUTPOWER..............................................................................................17 6.46DBOCCUPYBANDWIDTH...................................................................................................................................19 6.5POWERSPECTRALDENSITY................................................................................................................................33 6.6BAND-EDGEFORRFCONDUCTEDEMISSIONS...................................................................................................41 6.7RFCONDUCTEDSPURIOUSEMISSIONS...............................…

Text truncated - open the document above for the full version.

FCCID:2ATOW-TD-E2123 9KHz~30MHz: 30MHz~1GHz: FCCID:2ATOW-TD-E2123 Above1GHz: 1.1ConductedEmission FCCID:2ATOW-TD-E2123 Above1GHz: 1.2ConductedEmission