2ATZ4-A1300Smart Phone

A13 www.umidigi.com Thanks for choosing UMIDIGl products MP05 Language Catalogue 1 Deutsch 7 Italiano 13 Español 19 Français 25 日本語 31 Visit www.umidigi.com for more information UMIDIGI is registered trademark by Shenzhen Youmi Intelligent Technology Co., Ltd. All other trademarks are the property of their respective owner. English 16MP Screen Light/Proximity Sensor 3.5 mm Headphone jack Mic 1 Mic 2 Dual LED Flash 48MP Main 8MP Super Wide Angle 5MP Macro Customizable Button Finger print Scanner / Power Key Volume± SIM/T-flash card Slot GSM:B2/5 Operating systen CPU GPU RAM ROM Battery Touch ID Bluetooth 5.0 4GB/6GB 128GB 5150mAh Side-mounted Fingerprint sensor 6.7 inch 720*1650 pixels 48MP+8MP+ Camera5MP 16MP Camera LTE FDD:B /2 /5 12/13 LTE TDD: B41 WCDMA:B /2 5 Build in GPS/Glonass/Beidou 3.5mm Android™ 11 T610, 2×A75 1.8GHz+6×A55 1.8GHz 3GP/MPEG4,etc WAV/MP3/AAC/AMR/MIDI/APE/WMA,etc. MP05 ARM Mali G52 3EE 2-Core, 614.4MHz 2 Nano SIM Card Or 1 Nano SIM Card and 1 TF Card IEEE802.11 ac/a/b/g/n 3.5 mm Kopfhörerbuchse Mikrofon 1 16MP Lichtsensor/ Abstandssensor Mikrofon 2 Dual-LED-Blitz Anpassbare Schaltflâche Fingerabdruck Scanner / Kraftschlüssel Lautstärke± SIM/T-Blitz Kartenschlitz 8MP Super Weitwinkel 5MP Makro 48MP Main 5150mAh 720*1650 pixels 48MP+8MP+ Camera5MP 16MP Camera Seitlich montierter Fingerabdruck sensor 3.5mm Android™ 11 CPU GPU 3GP/MPEG4,etc WAV/MP3/AAC/AMR/MIDI/APE/WMA,etc. MP05 4GB/6GB 128GB 6.7 inch Bluetooth 5.0 Build in GPS/Glonass/Beidou T610, 2×A75 1.8GHz+6×A55 1.8GHz ARM Mali G52 3EE 2-Core, 614.4MHz 2 Nano SIM Karte oder 1 Nano SIM Karte und 1 TF-Karte GSM:B2/5 LTE FDD:B /2 /5 12/13 LTE TDD: B41 WCDMA:B /2 5 IEEE802.11 ac/a/b/g/n Jack per cuffie da 3.5 mm Sensore luce/ distanza Microfono 1 Tipo-c UsB Schermo 16MP Fotocamera frontale Capsula audio Microfono 2 Altoparlante Doppio flash LED 48MP Principale 8MP Super Angolo ampio Personali -zzabile Pulsante Sensore di impronte/ Tasto Power SIM/T-flash slot per schede 5MP Macro Volume± Fotocamera posteriore Fotocamera frontale da 4GB/6GB 5150mAh 6.7 720*1650 pixels 48MP+8MP+ Camera5MP 16MP Camera Build in GPS/Glonass/Beidou Lettore d’impronte laterale 3.5mm Android™ 11 CPU GPU 3GP/MPEG4,etc WAV/MP3/AAC/AMR/MIDI/APE/WMA,etc. 128GB MP05 Bluetooth 5.0 T610, 2×A75 1.8GHz+6×A55 1.8GHz ARM Mali G52 3EE 2-Core, 614.4MHz 2 schede Nano SIM o 1 scheda Nano SIM e 1 scheda TF GSM:B2/5 LTE FDD:B /2 /5 12/13 LTE TDD: B41 WCDMA:B /2 5 IEEE802.11 ac/a/b/g/n

Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Tel: 86-075583220991; Fax: 86-075583220991 Email: [email protected] Date: 2022-06-07 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, The Main chip, model: UMS512, installed in our product Smart phone, model: A13, F3 SE, FCC ID: 2ATZ4-A1300, this chip supports LTE function, but for marketing purpose, this chip only supports LTE band 2/5/12/13/41(2535-2655MHz), not support other LTE bands. The other LTE bands was disabled to use by manufacture in the software, the end user has no capability to activate it. The RF chip, model: UMW2652 installed in our product Smart phone, model: A13, F3 SE, FCC ID: 2ATZ4-A1300, supports 5G Wi-Fi function, but for marketing purpose, this chip only supports 5G Wi-Fi(5150-5250 MHz; 5725-5850 MHz). The 5G Wi-Fi (5250-5350 MHz, 5470-5725 MHz) was disabled to use by manufacture in the software, the end user has no capability to activate it. Signature: Wang Kun Manager

Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220313-08568E-RF LABEL AND LOCATION Page 1 of 2 Model: A13 FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925) Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220313-08568E-RF LABEL AND LOCATION Page 2 of 2 Model: F3 SE FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220313-08568E-RF Internal Photos Page 1 of 10 Internal photos A13 F3 SE Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220313-08568E-RF Internal Photos Page 2 of 10 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220313-08568E-RF Internal Photos Page 3 of 10 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220313-08568E-RF Internal Photos Page 4 of 10 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220313-08568E-RF Internal Photos Page 5 of 10 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220313-08568E-RF Internal Photos Page 6 of 10 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220313-08568E-RF Internal Photos Page 7 of 10 Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220313-08568E-RF Internal Photos Page 8 of 10 FM Antenna WIFI 5G Antenna Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220313-08568E-RF Internal Photos Page 9 of 10 WIFI 2.4G/BT/BLE Antenna WWAN Aux Antenna Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220313-08568E-RF Internal Photos Page 10 of 10 WWAN Main Antenna

★ Note: This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “ ”. Shenzhen Accurate Technology Co., Ltd. is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be Ave.ailable only under the Adobe software above version 7.0. Shenzhen Accurate Technology Co., Ltd. 1/F., Building A, Changyuan New Material Port, Science & Industry Park, Nanshan District, Shenzhen, Guangdong, P.R. China Tel: +86 755-26503290 Fax: +86 755-26503396 Web: www.atc-lab.com Version 10: 2021-11-09 Page 1 of 87 FCC-5G Wi-Fi TEST REPORT Applicant Name : Shenzhen Youmi Intelligent Technology Co., Ltd. Address : 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Report Number : SZNS220313-08566E-RF-00B FCC ID: 2ATZ4-A13PF Test Standard (s) FCC PART 15.407 Sample Description Product Type: Smart phone Model No.: A13 Pro Multiple Model(s) No.: F3S(Please refer to DOS for Model difference) Trade Mark: UMIDIGI Date Received: 2022/03/13 Report Date: 2022/05/12 Test Result: Pass* * In the configuration tested, the EUT complied with the standards above. Prepared and Checked By: Approved By: Ting Lü Robert Li EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: SZNS220313-08566E-RF-00B Version 10: 2021-11-09 Page 2 of 87 FCC-5G Wi-Fi TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 7 DUTY CYCLE ................................................................................................................................................................ 7 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 7 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 7 EXTERNAL I/O CABLE .................................................................................................................................................. 7 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 8 SUMMARY OF TEST RESULTS ............................................................................................................................... 9 TEST EQUIPMENT LIST ......................................................................................................................................... 10 FCC §1.1307(B) & §2.1093 - RF EXPOSURE INFORMATION ............................................................................ 11 APPLICABLE STANDARD ............................................................................................................................................ 11 TEST RESULT ............................................................................................................................................................. 11 FCC §15.203 – ANTENNA REQUIREMENT .......................................................................................................... 12 APPLICABLE STANDARD ............................................................................................................................................ 12 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 12 FCC §15.407 (B) (6) §15.207 (A) – CONDUCTED EMISSIONS ............................................................................ 13 APPLICABLE STANDARD ............................................................................................................................................ 13 EUT SETUP ................................................................................................................................................................ 13 EMI TEST RECEIVER SETUP ....................................................................................................................................... 13 TEST PROCEDURE ....................…

Text truncated - open the document above for the full version.

Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220313-08568E-RF Test Photos Page 1 of 2 Photo of Conducted Emission Measurement Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220313-08568E-RF Test Photos Page 2 of 2 Photo of Radiated Emission Measurement (Below 1G) Photo of Radiated Emission Measurement (Above 1G)