2ATZ4-G3MECHASmart phone

www.umidigi.com Thanks for choosing UMIDIGl products RP07 G3 Mecha Amazon service Email:[email protected] Visit www.umidigi.com for more information UMIDIGI is registered trademark by Shenzhen Youmi Intelligent Technology Co., Ltd. All other trademarks are the property of their respective owner. Language Catalogue Deutsch 7 Italiano 13 Español 19 Français 25 日本語 31 1 English Screen Light/Proximity Sensor Headphone jack Mic 1 Mic 2 Dual LED Flash 50MP Main Depth- of-field SIM/TF Slot Fingerprint Scanner & Power Button 4G LTE Nano SIM1 4G LTE Nano SIM2 Micro-SD Nano SIM1 4G LTE Android is a trademark of Google LLC. 50MP+2MP Camera 8MP Camera 6.6 inch 1612x720 Pixels WAV/MP3/AAC/AMR/MIDI,etc. 3GP/MPEG4,etc. Band Bluetooth 5.0 LTE FDD:B2/5/7/12 LTE TDD:B41 WCDMA:B2/5 GSM:B2/5 GNSSGPS, Beidou, Glonass,Galileo Type-C WIFI SIM/TF card USB Port Bluetooth Earphone Port IEEE802.11 ac/a/b/g/n 2 Nano SIM Card Or 1 Nano SIM and 1 TF Card 1x Phone 1x Screen Protector (pre-applied) 1x Type-C Cable 1x Power Adapter 1x Quick Start Guide CPU Operating System GPU RAM ROM Battery 8/4GB 128GB 6000mAh G3 Mecha Arm Mali G57 1Cocre @650MHz Android 13 T606 2xCortex-A75+6xCortex-A55 1.6GHz Touch ID Side Fingerprint Kopfhörerbuchse Mikrofon 1 Lichtsensor/ Abstandssensor Mikrofon 2 Dual-LED-Blitz Lautstärke+ 50MP Main SIM/TF Slot Lautstärke- Schärfen -tiefe Fingerabdruck Scanner / Kraftschlüssel 4G LTE Nano SIM1 4G LTE Nano SIM2 Micro-SD Nano SIM1 4G LTE 50MP+2MP Camera 8MP Camera 1612x720 Pixels 6.6 Zoll WAV/MP3/AAC/AMR/MIDI,etc. 3GP/MPEG4,etc. 1x Telefon 1x Displayschutzfolie (vorab angewendet) 1x Typ-C-Kabel 1x Netzteil 1x Kurzanleitung Bluetooth 5.0 GNSSGPS, Beidou, Glonass,Galileo Type-C WIFI Bluetooth IEEE802.11 ac/a/b/g/n 2 Nano SIM Card Or 1 Nano SIM and 1 TF Card USB SIM/TF Karte CPU GPU RAM ROM Akku Betriebssystem 8/4GB 128GB 6000mAh G3 Mecha Android 13 Touch ID Seitlicher Fingerabdruck Arm Mali G57 1Cocre @650MHz T606 2xCortex-A75+6xCortex-A55 1.6GHz LTE FDD:B2/5/7/12 LTE TDD:B41 WCDMA:B2/5 GSM:B2/5 Sensore luce/ distanza Schermo Fotocamera frontale Capsula audio Microfono 2 Jack per cuffie Microfono 1 Tipo-c UsB Altoparlante Doppio flash LED 50MP Principale SIM/TF Slot Profondità Sensore di impronte/ Tasto Power 4G LTE Nano SIM1 4G LTE Nano SIM2 Micro-SD Nano SIM1 4G LTE 50MP+2MP Camera 8MP Camera 1x Telefono 1x Screen Protector (pre-applicato) 1x Cavo di tipo C. 1x Adattatore di alimentazione 1x Guida rapida WAV/MP3/AAC/AMR/MIDI,etc. 3GP/MPEG4,etc. 1612x720 Pixels 6.6 Pollici Scheda SIM/TF Bluetooth 5.0 GNSSGPS, Beidou, Glonass,Galileo Type-C WIFI Bluetooth IEEE802.11 ac/a/b/g/n 2 Nano SIM Card Or 1 Nano SIM and 1 TF Card USB Sistema Operativo CPU Batteria GPU RAM ROM 8/4GB 128GB 6000mAh G3 Mecha Android 13 Touch IDLmpronta Digitale Laterale Arm Mali G57 1Cocre @650MHz T606 2xCortex-A75+6xCortex-A55 1.6GHz LTE FDD:B2/5/7/12 LTE TDD:B41 WCDMA:B2/5 GSM:B2/5

Micrófono 1 Altavoz Sensor de luz/ sensor de distancia Toma de auriculares Receptor Cámara frontal Pantalla Micrófono 2 Flash LED doble 50MP Principal SIM/TF Slot Profundidad de campo Huella- dactilar Escáner / Power Key 4G LTE Nano SIM1 4G LTE Nano SIM2 Micro-SD Nano SIM1 4G LTE 50MP+2MP Camera 8MP Camera 1x Teléfono 1x Protector de pantalla (preaplicado) 1x Cable tipo C 1x Adaptador de corriente 1x Guía de inicio rápido WAV/MP3/AAC/AMR/MIDI,etc. 3GP/MPEG4,etc. 1612x720 Pixels 6.6 Pulgadas SIM/TF Tarjeta Bluetooth 5.0 GNSSGPS, Beidou, Glonass,Galileo Type-C WIFI Bluetooth IEEE802.11 ac/a/b/g/n 2 Nano SIM Card Or 1 Nano SIM and 1 TF Card USB Sistema operativo CPU Batería GPU RAM ROM 8/4GB 128GB 6000mAh G3 Mecha Android 13 Touch IDHuella digital lateral Arm Mali G57 1Cocre @650MHz T606 2xCortex-A75+6xCortex-A55 1.6GHz LTE FDD:B2/5/7/12 LTE TDD:B41 WCDMA:B2/5 GSM:B2/5 Haut-parleur capteur de lumière/ capteur de distance Caméra frontale Prise casque Flash double LED 50MP Principale SIM/TF Slot Profondeur de champ Impressão digital lateral / Bouton d' alimentation 4G LTE Nano SIM1 4G LTE Nano SIM2 Micro-SD Nano SIM1 4G LTE 50MP+2MP Camera 8MP Camera WAV/MP3/AAC/AMR/MIDI,etc. 3GP/MPEG4,etc. 1x téléphone 1x protecteur d'écran (pré-appliqué) 1x câble de type C 1x adaptateur secteur 1x Guide de démarrage rapide 1612x720 Pixels 6.6 Pouces Band Bluetooth 5.0 GNSSGPS, Beidou, Glonass,Galileo Type-C WIFI Bluetooth IEEE802.11 ac/a/b/g/n 2 Nano SIM Card Or 1 Nano SIM and 1 TF Card USB Carte SIM/TF CPU GPU RAM ROM Batterie 8/4GB 128GB 6000mAh G3 Mecha Android 13 Empreinte Digitale Latérale Arm Mali G57 1Cocre @650MHz T606 2xCortex-A75+6xCortex-A55 1.6GHz LTE FDD:B2/5/7/12 LTE TDD:B41 WCDMA:B2/5 GSM:B2/5 光センサー/距離センサ ファーストマイク 1 スピーカー ファーストマイク 2 デュアルフラッシュ 音量ボタン+ 音量ボタン- 50MP メインショット 深度カメラ SIM/TF Slot 指紋認証/ 電源ボタン 4G LTE Nano SIM1 4G LTE Nano SIM2 Micro-SD Nano SIM1 4G LTE 指紋認証 指紋認証機能で画面のロックを解除できます。 設定>セキュリティ＆位置情報サービス>指紋IDをタップして、画面の指 示に従って指紋情報を入力してください。 注意点: 指紋情報の入力の時は、きれいで乾燥した指で確保してください。指紋 採取のために指の腹の情報を入力してください。指紋で画面のロックを 解除する時は、約一秒間指の腹をタッチIDセンサーに置きます。 50MP+2MP Camera 8MP Camera WAV/MP3/AAC/AMR/MIDI,etc. 3GP/MPEG4,etc. Bluetooth 5.0 GNSSGPS, Beidou, Glonass,Galileo Type-C WIFI Bluetooth IEEE802.11 ac/a/b/g/n CPU GPU RAM ROM 8/4GB 128GB 6000mAh G3 Mecha Android 13 側面指紋 Arm Mali G57 1Cocre @650MHz T606 2xCortex-A75+6xCortex-A55 1.6GHz LTE FDD:B2/5/7/12 LTE TDD:B41 WCDMA:B2/5 GSM:B2/5 Safety Statement Made in China Follow UMIDIGI community.a place where you can share and discuss with UMIDIGl Manufacturer: Shenzhen Youmi Intelligent Technology Co., Ltd. Add:406-407 Jinqi Zhigu Building,4/F,1 Tangling Road, Nanshan District, Shenzhen City,Guangdong Province China

Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Tel: 86-075583220991; Fax: 86-075583220991 Email: [email protected] Date: 2023-04-15 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD21046 Dear Sir/Madam, The Main chip, model: UMS9230, installed in our product Smart phone, model: G3 Mecha, FCC ID: 2ATZ4-G3MECHA, this chip supports LTE function, but for marketing purpose, this chip only supports LTE band 2/5/7/12/41(2545-2655MHz), not supports other LTE bands. The other LTE bands were disabled to use by manufacture in the software, the end user has no capability to activate it. The RF chip, model: UMW2631, installed in our product Smart phone, model: G3 Mecha, FCC ID: 2ATZ4-G3MECHA, supports 2.4G Wi-Fi and 5G Wi-Fi function, but for marketing purpose, this chip only supports 2.4G Wi-Fi(2412-2462MHz/2422-2452MHz), 5G Wi-Fi(5150-5250 MHz; 5725-5850 MHz). The other 2.4G Wi-Fi and 5G Wi-Fi bands were disabled to use by manufacture in the software, the end user has no capability to activate it. Signature: Wang Kun Manager

Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Tel: 86-075583220991; Fax: 86-075583220991 Email: [email protected] CFR 47 §2.911(d)(5)(i) Attestation Letter Attestation Letter Date: 2023-04-15 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: 2ATZ4-G3MECHA Shenzhen Youmi Intelligent Technology Co., Ltd. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature: Contact Person:Wang Kun Title:Manager

Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Tel: 86-075583220991; Fax: 86-075583220991 Email: [email protected] CFR 47 §2.911 (d)(5)(ii) Attestation Letter Attestation Letter Date: 2023-04-15 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: 2ATZ4-G3MECHA Shenzhen Youmi Intelligent Technology Co., Ltd. certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature: Contact Person:Wang Kun Title:Manager

Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Tel: 86-075583220991; Fax: 86-075583220991 Email: [email protected] QA-FR-170-B 7/29/2014 FCC Authorization Date: 2023-04-15 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We Shenzhen Youmi Intelligent Technology Co., Ltd., the undersigned, hereby authorizes Shenzhen Accurate Technology Co., Ltd. to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Shenzhen Accurate Technology Co., Ltd. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Wang Kun Manager

Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Tel: 86-075583220991; Fax: 86-075583220991 Email: [email protected] FCC Confidential Authorization Date: 2023-04-15 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2ATZ4-G3MECHA In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Shenzhen Youmi Intelligent Technology Co., Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description  Parts List/Tune up procedure (for licensed devices)  Software Security Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Wang Kun Manager

Shenzhen Accurate Technology Co., Ltd. Project No.: RA230324-14508E-RF External Photos Page 1 of 6 External Photos Shenzhen Accurate Technology Co., Ltd. Project No.: RA230324-14508E-RF External Photos Page 2 of 6 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230324-14508E-RF External Photos Page 3 of 6 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230324-14508E-RF External Photos Page 4 of 6 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230324-14508E-RF External Photos Page 5 of 6 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230324-14508E-RF External Photos Page 6 of 6

The E-label information A. Access to the required information on the e-label 1. Users are able to access the information in no more than three steps in a device’s menu. The actual steps are: To access the e-label information, in the device, Choose: Settings > About phone > Authentication information No special access codes or permissions are required to go through the above steps beyond entering a user defined password to protect against unauthorized access to the device. 2. The information is stored on the device, no special accessories or supplemental plug-ins (e.g., a SIM/USIM card) are required to access the information. Yes 3. Users are provided specific instructions on how to access the information. The information to the user is provided in the E-label Info document. Detailed as follows: Scroll through the menu to find and select Settings Scroll down in Settings to find and select About phone Scroll down in Settings to find and select Authentication information The e-label will display Regulatory information B. Labeling for Importation and Purchasing 1. Products utilizing e-labels are required to have a physical label on the product at the time of importation, marketing and sales. For devices imported in bulk and not packaged individually, a removable adhesive label or, for devices in protective bags, a label on the bags is acceptable for this purpose. Any removable label shall be of a type intended to survive normal shipping and handling and must only be removed by the customer after purchase. For devices imported already in individual packages ready for sale, the information may alternatively be provided on the package. It shall contain: 1. The FCC ID and/or the DoC logo (if applicable); and 2. Any other information required by specific rule to be provided on the surface of the product unless such information is permitted to be included in the User’s manual or other packaging inserts. C. Other considerations 1. The above information must be programmed by the responsible party and the information must be secured in such a manner that third-parties cannot modify it. The e-label information is pre-programmed by the grantee. The user cannot modify the e-label information.

Shenzhen Accurate Technology Co., Ltd. Project No.: RA230324-14508E-RF Internal Photos Page 1 of 8 Internal photos Shenzhen Accurate Technology Co., Ltd. Project No.: RA230324-14508E-RF Internal Photos Page 2 of 8 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230324-14508E-RF Internal Photos Page 3 of 8 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230324-14508E-RF Internal Photos Page 4 of 8 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230324-14508E-RF Internal Photos Page 5 of 8 Shenzhen Accurate Technology Co., Ltd. Project No.: RA230324-14508E-RF Internal Photos Page 6 of 8 BT&2.4G WIFI ANT Shenzhen Accurate Technology Co., Ltd. Project No.: RA230324-14508E-RF Internal Photos Page 7 of 8 5G WIFI ANT DIV ANT Note: the PCS1900/WCDMA B2/LTE B2 transmit on DIV ANT Shenzhen Accurate Technology Co., Ltd. Project No.: RA230324-14508E-RF Internal Photos Page 8 of 8 Main ANT Note: GSM850/WCDMA B5/LTE B5/7/12/41 transmit on Main ANT

Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 1 of 6 APPENDIX B EUT TEST POSITION PHOTOS Liquid depth ≥ 15cm Phantom Type: Twin SAM Phantom ; Type: QD000 P40 CD; Serial: TP:1744 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 2 of 6 Head Left Cheek Setup Photo Head Left Tilt Setup Photo Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 3 of 6 Head Right Cheek Setup Photo Head Right Tilt Setup Photo Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 4 of 6 Body Front Setup Photo (10mm) Body (Worn) Back Setup Photo (10mm) 10 mm 10 mm Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 5 of 6 Body Left Setup Photo (10mm) Body Right Setup Photo (10mm) 10 mm 10 mm Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 6 of 6 Body Top Setup Photo (10mm) Body Bottom Setup Photo (10mm) 10 mm 10 mm

Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 1 of 47 APPENDIX C PROBE CALIBRATION CERTIFICATES Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 2 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 3 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 4 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 5 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 6 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 7 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 8 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 9 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 10 of 47 APPENDIX D DIPOLE CALIBRATION CERTIFICATES Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 11 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 12 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 13 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 14 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 15 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 16 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 17 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 18 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 19 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 20 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 21 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 22 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 23 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 24 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 25 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 26 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 27 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 28 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 29 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 30 of 47

Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 31 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 32 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 33 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 34 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 35 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 36 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 37 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 38 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 39 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 40 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 41 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 42 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 43 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 44 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 45 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 46 of 47 Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Page 47 of 47

Note: This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. Shenzhen Accurate Technology Co., Ltd. is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. Shenzhen Accurate Technology Co., Ltd. 1/F., Building A, Changyuan New Material Port, Science & Industry Park, Nanshan District, Shenzhen, Guangdong, P.R. China Tel: +86 755-26503290 Fax: +86 755-26503290 Web: www.atc-lab.com Version 39: 2023-01-30 Page 1 of 74 FCC SAR TEST REPORT Applicant Name : Shenzhen Youmi Intelligent Technology Co., Ltd. Address : 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Report Number : RA230324-14508E-20A FCC ID: 2ATZ4-G3MECHA Test Standard (s) FCC Part 2.1093 Sample Description Product Type: Smart phone Model No.: G3 Mecha Multiple Models: N/A Trade Mark: UMIDIGI Date Received: 2023/03/27 Date of Test: 2023/03/29-2023/04/24 Report Date: 2023/04/26 Test Result: Pass* * In the configuration tested, the EUT complied with the standards above. Prepared and Checked By: Approved By: Lance Li Candy Li EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Version 39: 2023-01-30 Page 2 of 74 FCC SAR Attestation of Test Results MODE Max. SAR Level(s) Reported(W/kg) Limit (W/kg) GSM 850 1g Head SAR 0.04 1.6 1g Body SAR 0.24 PCS 1900 1g Head SAR 0.59 1g Body SAR 0.33 WCDMA Band 2 1g Head SAR 0.72 1g Body SAR 0.50 WCDMA Band 5 1g Head SAR 0.02 1g Body SAR 0.09 LTE Band 2 1g Head SAR 0.75 1g Body SAR 0.69 LTE Band 5 1g Head SAR 0.02 1g Body SAR 0.16 LTE Band 7 1g Head SAR 0.43 1g Body SAR 0.74 LTE Band 12 1g Head SAR 0.07 1g Body SAR 0.22 LTE Band 41 1g Head SAR 0.16 1g Body SAR 0.36 2.4G Wi-Fi 1g Head SAR 0.51 1g Body SAR 0.12 5.2G Wi-Fi 1g Head SAR 0.19 1g Body SAR 0.08 5.8G Wi-Fi 1g Head SAR 0.53 1g Body SAR 0.19 Simultaneous 1g Head SAR 1.28 1g Body SAR 0.93 1g Body SAR 0.93(Hotspot) Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Version 39: 2023-01-30 Page 3 of 74 FCC SAR Applicable Standards FCC 47 CFR part 2.1093 Radiofrequency radiation exposure evaluation: portable devices RF Exposure Procedures: TCB Workshop October 2016(Bluetooth Duty Factor) IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques KDB procedures KDB 447498 D01 General RF Exposure Guidance v06 KDB 648474 D04 Handset SAR v01r03 KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04 KDB 865664 D02 RF Exposure Reporting v01r02 KDB 941225 D01 3G SAR Procedures v03r01 KDB 941225 D05 SAR for LTE Devices v02r05 KDB 941225 D06 Hotspot Mode v02r01 KDB 248227 D01 802 11 Wi-Fi SAR v02r02 Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in FCC 47 CFR part 2.1093 and has been tested in Accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Shenzhen Accurate Technology Co., Ltd. Report No.: RA230324-14508E-20A Version 39: 2023-01-30 Page 4 of 74 FCC SAR TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 5 EUT DESCRIPTION ................................................................................................................................................... 6 TECHNICAL SPECIFICATION ............................................................................................................................................. 6 REFERENCE, STANDARDS, AND GUIDELINES ................................................................................................. 7 SAR LIMITS ..................................................................................................................................................................... 8 FACILITIES ................................................................................................................................................................. 9 DESCRIPTION OF TEST SYSTEM ........................................................................................................................ 10 EQUIPMENT LIST AND CALIBRATION ............................................................................................................. 16 EQUIPMENTS LIST & CALIBRATION INFORMATION ........................................................................................................ 16 SAR MEASUREMENT SYSTEM VERIFICATION ............................................................................................. 17 LIQUID VERIFICATION ................................................................................................................................................... 17 SYSTEM ACCURACY VERIFICATION ............................................................................................................................... 20 SAR SYSTEM VALIDATION DATA ......................................................................................................................... 21 EUT TEST STRATEGY AND METHODOLOGY .............................................................…

Text truncated - open the document above for the full version.

ShenZhen Test Plot 1 DUT: G3 Communi c Medium pa Phantom s DASY5 C o • P • • E • P • M Area Sca n Maximum Zoom Sc a Reference Peak SAR SAR(1 g) = Maximum Accurate Tech 1#: GSM 850_ Mecha; Type cation System arameters use ection: Left S onfiguration: Probe: EX3D Senso r-Surfac Electronics: D Phantom: Twi Measurement n (8x10x1): M value of SAR an (5x5x7)/Cu Value = 0.939 (extrapolated = 0.024 W/kg value of SAR 0 dB = 0. hnology CO., _Head Left C e: Smart pho m: Generic GSM d: f = 836.6 M ection V4- SN7441; ce: 1.4mm (M DAE4 Sn1325 in SAM; Type t SW: DASY5 Measurement g R (measured) = ube 0: Measur 90 V/m; Powe d) = 0.0260 W g; SAR(10 g) R (measured) = .0245 W/kg = Ltd Cheek_Middle ne; Serial: 23 M (0); Freque MHz; σ = 0.90 ConvF(10.04 Mechanical Sur 5; Calibrated: 2 e: QD000P40C 52, Version 52 grid: dx=15mm = 0.0243 W/k rement grid: d er Drift = -0.0 W/kg = 0.019 W/k g = 0.0245 W/k -16.11 dB dB Page 1 of 2 e 3MG-1; ency: 836.6 M 09 S/m; ε r = 42 4, 10.04, 10.04 rface Detectio 2022/08/29 CD; Serial: TP 2.10 (4); SEMC m, dy=15mm kg dx=8mm, dy=8 02 dB g kg BW/kg 200 MHz;Duty Cyc 2.32; ρ = 1000 4) @836.6 MH on) P:1744 CAD X Versio 8mm, dz=5mm Report N le: 1:8 0 kg/m 3 ; Hz; Calibrated on 14.6.14 (75 m No.: RA23032 d: 2022/05/16 501) 24-14508E-20A ; A ShenZhen Test Plot 2 DUT: G3 Communi c Medium pa Phantom s DASY5 C o • P • • E • P • M Area Sca n Maximum Zoom Sc a Reference Peak SAR SAR(1 g) = Maximum Accurate Tech 2#: GSM 850_ Mecha; Type cation System arameters use ection: Left S onfiguration: Probe: EX3D Senso r-Surfac Electronics: D Phantom: Twi Measurement n (8x10x1): M value of SAR an (5x5x7)/Cu Value = 2.628 (extrapolated = 0.015 W/kg value of SAR 0 dB = 0. hnology CO., _Head Left T e: Smart pho m: Generic GSM d: f = 836.6 M ection V4- SN7441; ce: 1.4mm (M DAE4 Sn1325 in SAM; Type t SW: DASY5 Measurement g R (measured) = ube 0: Measur 8 V/m; Power d) = 0.0200 W g; SAR(10 g) R (measured) = .0200 W/kg = Ltd Tilt_Middle ne; Serial: 2 3 M (0); Freque MHz; σ = 0.90 ConvF(10.04 Mechanical Sur 5; Calibrated: 2 e: QD000P40C 52, Version 52 grid: dx=15mm = 0.0181 W/k rement grid: d r Drift = -0.14 W/kg = 0.010 W/k g = 0.0200 W/k -16.99 dB dB Page 2 of 2 3MG-1; ency: 836.6 M 09 S/m; ε r = 42 4, 10.04, 10.04 rface Detectio 2022/08/29 CD; Serial: TP 2.10 (4); SEMC m, dy=15mm kg dx=8mm, dy=8 4 dB g kg BW/kg 200 MHz;Duty Cyc 2.32; ρ = 1000 4) @836.6 MH on) P:1744 CAD X Versio 8mm, dz=5mm Report N le: 1:8 0 kg/m 3 ; Hz; Calibrated on 14.6.14 (75 m No.: RA23032 d: 2022/05/16 501) 24-14508E-20A ; A ShenZhen Test Plot 3 DUT: G3 Communi c Medium pa Phantom s DASY5 C o • P • • E • P • M Area Sca n Maximum Zoom Sc a Reference Peak SAR SAR(1 g) = Maximum Accurate Tech 3#: GSM 850_ Mecha; Type cation System arameters use ection: Right onfiguration: Probe: EX3D Senso r-Surfac Electronics: D Phantom: Twi Measurement n (8x10x1): M value of SAR an (5x5x7)/Cu Value = 1.855 (extrapolated = 0.035 W/kg value of SAR 0 dB = 0. hnology CO., _Head Right e: Smart pho m: Generic GSM d: f = 824.2 M Section V4- SN7441; ce: 1.4mm (M DAE4 Sn1325 in SAM; Type t SW: DASY5 Measurement g R (measured) = ube 0: Measur 5 V/m; Power d) = 0.0430 W g; SAR(10 g) R (measured) = .0363 W/kg = Ltd Cheek_Low ne; Serial: 2 3 M (0); Freque MHz; σ = 0.90 ConvF(10.04 Mechanical Sur 5; Calibrated: 2 e: QD000P40C 52, Version 52 grid: dx=15mm = 0.0351 W/k rement grid: d r Drift = -0.19 W/kg = 0.028 W/k g = 0.0363 W/k -14.40 dB dB Page 3 of 2 3MG-1; ency: 824.2 M 04 S/m; ε r = 42 4, 10.04, 10.04 rface Detectio 2022/08/29 CD; Serial: TP 2.10 (4); SEMC m, dy=15mm kg dx=8mm, dy=8 9 dB g kg BW/kg 200 MHz;Duty Cyc 2.484; ρ = 100 4) @824.2 MH on) P:1744 CAD X Versio 8mm, dz=5mm Report N le: 1:8 00 kg/m 3 ; Hz; Calibrated on 14.6.14 (75 m No.: RA23032 d: 2022/05/16 501) 24-14508E-20A ; A ShenZhen Test Plot 4 DUT: G3 Communi c Medium pa Phantom s DASY5 C o • P • • E • P • M Area Sca n Maximum Zoom Sc a Reference Peak SAR SAR(1 g) = Maximum Accurate Tech 4#: GSM 850_ Mecha; Type cation System arameters use ection: Right onfiguration: Probe: EX3D Senso r-Surfac Electronics: D Phantom: Twi Measurement n (8x10x1): M value of SAR an (5x5x7)/Cu Value = 0 V/m (extrapolated = 0.026 W/kg value of SAR 0 dB = 0. hnology CO., _Head Right e: Smart pho m: Generic GSM d: f = 836.6 M Section V4- SN7441; ce: 1.4mm (M DAE4 Sn1325 in SAM; Type t SW: DASY5 Measurement g R (measured) = ube 0: Measur m; Power Dri d) = 0.0300 W g; SAR(10 g) R (measured) = .0267 W/kg = Ltd Cheek_Midd ne; Serial: 23 M (0); Freque MHz; σ = 0.90 ConvF(10.04 Mechanical Sur 5; Calibrated: 2 e: QD000P40C 52, Version 52 …

Text truncated - open the document above for the full version.