2ATZ4-G3TABSmart Tablet Computer

Building a great tablet is hard enough,so building agreat tablet on a budget should be infinitely more difficult.Big thanks to all who mdae this supertablet super awesome by contributing valu- able time and developing hardware ,software & other developments, Thanks for choosing UMIDIGI products, thanks to your support our value can be realized and we acn constantly move forward to create smart devices with better user experience. www umidigi.com Scan following QR-codes to follow us and enter giveaway to win a UMIDIGI smart device for free! G3 Tab WCDMA:B2/5 FDD:B2/5/7/12 TDD:B41 G3 Tab GSM: B2/5 WCDMA:B2/5 FDD:B2/5/7/12 TDD:B41

G3 Tab GSM: B2/5 WCDMA:B2/5 FDD:B2/5/7/12 TDD:B41 G3 Tab GSM: B2/5 WCDMA:B2/5 FDD:B2/5/7/12 TDD:B41 G3 Tab GSM: B2/5 WCDMA:B2/5 FDD:B2/5/7/12 TDD:B41 G3 Tab GSM: B2/5 WCDMA:B2/5 FDD:B2/5/7/12 TDD:B41 38 The device has been tested and comply with FCC/ISEDC SAR limits. L'appareil a été testé et est conforme aux restrictions FCC/ISEDC SAR. 39 Amazon service Email : [email protected] Made in China

Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Tel: 86-075583220991; Fax: 86-075583220991 Email: [email protected] CFR 47 §2.911(d)(5)(i) Attestation Letter Attestation Letter Date: 2023-03-10 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: 2ATZ4-G3TAB Shenzhen Youmi Intelligent Technology Co., Ltd. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature: Contact Person:Wang Kun Title:Manager

Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Tel: 86-075583220991; Fax: 86-075583220991 Email: [email protected] CFR 47 §2.911 (d)(5)(ii) Attestation Letter Attestation Letter Date: 2023-03-10 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: 2ATZ4-G3TAB Shenzhen Youmi Intelligent Technology Co., Ltd. certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature: Contact Person:Wang Kun Title:Manager

Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Tel: 86-075583220991; Fax: 86-075583220991 Email: [email protected] QA-FR-170-B 7/29/2014 FCC Authorization Date: 2023-03-10 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We Shenzhen Youmi Intelligent Technology Co., Ltd., the undersigned, hereby authorizes China Certification ICT Co., Ltd (Dongguan). to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan). on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Wang Kun Manager

Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Tel: 86-075583220991; Fax: 86-075583220991 Email: [email protected] FCC Confidential Authorization Date: 2023-03-10 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2ATZ4-G3TAB In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Shenzhen Youmi Intelligent Technology Co., Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description  Parts List/Tune up procedure (for licensed devices)  Software Security Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Wang Kun Manager

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS

label Label location UMIDIGI G3 Tab Memory:RAM 3GB+ROM 32GB IMEI 1:35414308XXXXXX S/N:G3Tb33200000001 IC: 26074-G3TAB HVIN:M869YCR100 Made in China FCC ID: 2ATZ4-G3TAB 5GHz band(W52) Indoor use 211-230215 AD230003211 Manufacturer:Shenzhen Youmi lntelligent Technology Co.,Ltd. Add:406-407 Jinqi Zhigu Building,4/F,1 Tangling Road, Nanshan District,Shenzhen City,China. Midnight Blue Color: MT06

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS WWAN Main Antenna WWAN DIV Antenna WLAN/Bluetooth Antenna

Report No.: CR230205724-20A Page 1 of 3 APPENDIX B EUT TEST POSITION PHOTOS Liquid depth ≥ 15cm Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412 Report No.: CR230205724-20A Page 2 of 3 Body Front Setup Photo (0mm) Body Back Setup Photo (0mm) Report No.: CR230205724-20A Page 3 of 3 Body Left Setup Photo (0mm) Body Bottom Setup Photo (0mm)

APPENDIX C PROBE CALIBRATION CERTIFICATES PROBE CALIBRATION CERTIFICATES

DIPOLE CALIBRATION CERTIFICATES

SAR TEST REPORT Applicant: Shenzhen Youmi Intelligent Technology Co., Ltd Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China FCC ID: 2ATZ4-G3TAB Product Name: Smart Tablet Computer Tested Model: G3 Tab Standard(s): 47 CFR Part 2(2.1093) The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230205724-20A Date Of Issue: 2023-03-21 Reviewed By: Karl Gong Title: SAR Engineer Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230205724-20A Page 2 of 87 SAR TEST RESULTS SUMMARY Operation Frequency Bands Highest Reported 1g SAR (W/kg) Limits (W/kg) Body-Supported (Gap 0mm) GSM 850 1.13 1.6 PCS 1900 1.23 WCDMA Band 2 1.18 WCDMA Band 5 0.97 LTE Band 2 0.88 LTE Band 5 0.65 LTE Band 7 1.22 LTE Band 12 0.46 LTE Band 41 0.83 WLAN 2.4G 0.29 WLAN 5.2G 0.49 WLAN 5.8G 0.33 Bluetooth 0.26 Maximum Simultaneous Transmission SAR Items Body-Supported Limits Sum SAR(W/kg) 1.52 1.6 SPLSR N/A 0.04 EUT Received Date: 2023/02/24 Tested Date: 2023/03/08~ 2023/03/12 Tested Result: Pass China Certification ICT Co., Ltd (Dongguan) Report No.: CR230205724-20A Page 3 of 87 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230205724-20A Page 4 of 87 CONTENTS SAR TEST RESULTS SUMMARY .............................................................................................. 2 TEST FACILITY .......................................................................................................................................... 3 DECLARATIONS .......................................................................................................................................... 3 DOCUMENT REVISION HISTORY .......................................................................................... 6 1. GENERAL INFORMATION .................................................................................................... 7 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 7 1.2 TEST SPECIFICATION, METHODS AND PROCEDURES ........................................................................ 8 1.3 SAR LIMTS ........................................................................................................................................... 9 2. SAR MEASUREMENT SYSTEM .......................................................................................... 10 3. EQUIPMENT LIST AND CALIBRATION .......................................................................... 18 3.1 EQUIPMENTS LIST & CALIBRATION INFORMATION ....................................................................... 18 4. SAR MEASUREMENT SYSTEM VERIFICATION ........................................................... 19 4.1 LIQUID VERIFICATION ...................................................................................................................... 19 4.2 SYSTEM ACCURACY VERIFICATION ................................................................................................. 22 4.3 SAR SYSTEM VALIDATION DATA ............................................................................................. 23 5. EUT TEST STRATEGY AND METHODOLOGY .............................................................. 29 5.1 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR ......................................... 29 5.2 CHEEK/TOUCH POSITION .................................................................................................................. 30 5.3 EAR/TILT POSITION ........................................................................................................................... 30 5.4 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS ................................................ 31 5.5 TEST DISTANCE FOR SAR EVALUATION .......................................................................................... 32 5.6 SAR EVALUATION PROCEDURE ....................................................................................................... 33 6. CONDUCTED OUTPUT POWER MEASUREMENT ........................................................ 34 6.1 TEST PROCEDURE .............................................................................................................................. 34 6.2 DESCRIPTION OF TEST CONFIGURATION ......................................................................................... 35 6.3 MAXIMUM TAR…

Text truncated - open the document above for the full version.

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230205724-20A Page 1 of 94 Plot 1#: GSM 850_ Body Worn Front_Mid DUT: Smart Tablet Computer; Type: G3 Tab; Serial: CR230205724-SA Communication System: Generic GSM (0); Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.923 S/m; ε r = 41.214; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7522; ConvF(9.7, 9.7, 9.7) @ 836.6 MHz; Calibrated: 2022/5/6  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354; Calibrated: 2022/10/31  Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.254 W/kg Zoom Scan (6x6x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 6.427 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 0.492 W/kg SAR(1 g) = 0.228 W/kg; SAR(10 g) = 0.117 W/kg Maximum value of SAR (measured) = 0.255 W/kg 0 dB = 0.255 W/kg = -5.93 dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: CR230205724-20A Page 2 of 94 Plot 2#: GSM 850_ Body Worn Back_ Mid DUT: Smart Tablet Computer; Type: G3 Tab; Serial: CR230205724-SA Communication System: Generic GSM (0); Frequency: 836.6 MHz;Duty Cycle: 1:8 Medium parameters used: f = 836.6 MHz; σ = 0.923 S/m; ε r = 41.214; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7522; ConvF(9.7, 9.7, 9.7) @ 836.6 MHz; Calibrated: 2022/5/6  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354; Calibrated: 2022/10/31  Phantom: SAM 1; Type: QD000P40CC; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.457 W/kg Zoom Scan (6x6x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 12.52 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 1.11 W/kg SAR(1 g) = 0.453 W/kg; SAR(10 g) = 0.215 W/kg Maximum value of SAR (measured) = 0.542 W/kg 0 dB = 0.542 W/kg = -2.66 dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: CR230205724-20A Page 3 of 94 Plot 3#: GSM 850_ Body Front_Mid DUT: Smart Tablet Computer; Type: G3 Tab; Serial: 2295 Communication System: Generic GPRS-2 slots (0); Frequency: 836.6 MHz;Duty Cycle: 1:4 Medium parameters used: f = 836.6 MHz; σ = 0.923 S/m; ε r = 41.214; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7522; ConvF(9.24, 9.24, 9.24) @ 836.6 MHz; Calibrated: 2022/5/6  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354; Calibrated: 2022/10/31  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (5x10x1):Measurement grid:dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.825 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 8.799 V/m; Power Drift = 0.15 dB Peak SAR (extrapolated) = 1.15 W/kg SAR(1 g) = 0.485 W/kg; SAR(10 g) = 0.250 W/kg Maximum value of SAR (measured) = 0.887 W/kg 0 dB = 0.887 W/kg = -0.52 dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: CR230205724-20A Page 4 of 94 Plot 4#: GSM 850_ Body Back_Low DUT: Smart Tablet Computer; Type: G3 Tab; Serial: 2295 Communication System: Generic GPRS-2 slots (0); Frequency: 824.2 MHz;Duty Cycle: 1:4 Medium parameters used: f = 824.2 MHz; σ = 0.893 S/m; ε r = 41.543; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7522; ConvF(9.24, 9.24, 9.24) @ 824.2 MHz; Calibrated: 2022/5/6  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354; Calibrated: 2022/10/31  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (5x10x1):Measurement grid:dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.42 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 12.03 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 2.08 W/kg SAR(1 g) = 0.748 W/kg; SAR(10 g) = 0.362 W/kg Maximum value of SAR (measured) = 1.46 W/kg 0 dB = 1.46 W/kg = 1.64 dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: CR230205724-20A Page 5 of 94 Plot 5#: GSM 850_ Body Back_Mid DUT: Smart Tablet Computer; Type: G3 Tab; Serial: 2295 Communication System: Generic GPRS-2 slots (0); Frequency: 836.6 MHz;Duty Cycle: 1:4 Medium parameters used: f = 836.6 MHz; σ = 0.923 S/m; ε r = 41.214; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7522; ConvF(9.24, 9.24, 9.24) @ 836.6 MHz; Calibrated: 2022/5/6  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354; Calibrated: 2022/10/31  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (5x10x1):Measurement grid:dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.958 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 13.23 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 2.11 W/kg SAR(1 g) = 0.931 W/kg; SAR(10 g) = 0.414 W/kg Maximum value of SAR (measured) = 1.55 W/kg 0 dB = 1.55 W/kg = 1.90 dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: CR230205724-20A Page 6 of 94 Plot 6#: GSM 850_ Body Back_ High DUT: Smart Tablet Computer; Type: G3 Tab; Serial: 2295 Communication System: Generic GPRS-2 slots (0); Frequency: 848.8 MHz;Duty Cycle: 1:4 Medium parameters used: f = 848.8 MHz; σ = 0.948 S/m; ε r = 40.992; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7522; ConvF(9.24, 9.24, 9.24) @ 848.8 MHz; Calibrated: 2022/5/6  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  E…

Text truncated - open the document above for the full version.

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230205724-20A Page 68 of 94 Plot 68#: LTE Band 41 50%RB_ Body Front_Mid DUT: Smart Tablet Computer; Type: G3 Tab; Serial: 2295 Communication System: Generic TDD-LTE (0); Frequency: 2593 MHz;Duty Cycle: 1:1.58 Medium parameters used: f = 2593 MHz; σ = 1.968 S/m; ε r = 38.934; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7522; ConvF(7.02, 7.02, 7.02) @ 2593 MHz; Calibrated: 2022/5/6  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354; Calibrated: 2022/10/31  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x12x1):Measurement grid:dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.699 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.101 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 0.832 W/kg SAR(1 g) = 0.341 W/kg; SAR(10 g) = 0.152 W/kg Maximum value of SAR (measured) = 0.615 W/kg 0 dB = 0.615 W/kg = -2.11 dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: CR230205724-20A Page 69 of 94 Plot 69#: LTE Band 41 1RB_ Body Back_Low DUT: Smart Tablet Computer; Type: G3 Tab; Serial: 2295 Communication System: Generic TDD-LTE (0); Frequency: 2506 MHz;Duty Cycle: 1:1.58 Medium parameters used: f = 2506 MHz; σ = 1.838 S/m; ε r = 39.288; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7522; ConvF(7.22, 7.22, 7.22) @ 2506 MHz; Calibrated: 2022/5/6  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354; Calibrated: 2022/10/31  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x12x1):Measurement grid:dx=12mm, dy=12mm Maximum value of SAR (measured) = 1.04 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.577 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 1.83 W/kg SAR(1 g) = 0.616 W/kg; SAR(10 g) = 0.227 W/kg Maximum value of SAR (measured) = 1.43 W/kg 0 dB = 1.43 W/kg = 1.55 dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: CR230205724-20A Page 70 of 94 Plot 70#: LTE Band 41 1RB_ Body Back_2549.5 MHz DUT: Smart Tablet Computer; Type: G3 Tab; Serial: 2295 Communication System: Generic TDD-LTE (0); Frequency: 2549.5 MHz;Duty Cycle: 1:1.58 Medium parameters used (interpolated): f = 2549.5 MHz; σ = 1.919 S/m; ε r = 38.967; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7522; ConvF(7.22, 7.22, 7.22) @ 2549.5 MHz; Calibrated: 2022/5/6  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354; Calibrated: 2022/10/31  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x12x1):Measurement grid:dx=12mm, dy=12mm Maximum value of SAR (measured) = 1.34 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 2.372 V/m; Power Drift = 0.18 dB Peak SAR (extrapolated) = 2.15 W/kg SAR(1 g) = 0.620 W/kg; SAR(10 g) = 0.220 W/kg Maximum value of SAR (measured) = 1.66 W/kg 0 dB = 1.66 W/kg = 2.20 dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: CR230205724-20A Page 71 of 94 Plot 71#: LTE Band 41 1RB_ Body Back_Mid DUT: Smart Tablet Computer; Type: G3 Tab; Serial: 2295 Communication System: Generic TDD-LTE (0); Frequency: 2593 MHz;Duty Cycle: 1:1.58 Medium parameters used: f = 2593 MHz; σ = 1.968 S/m; ε r = 38.934; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7522; ConvF(7.02, 7.02, 7.02) @ 2593 MHz; Calibrated: 2022/5/6  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354; Calibrated: 2022/10/31  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x12x1):Measurement grid:dx=12mm, dy=12mm Maximum value of SAR (measured) = 1.51 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 3.349 V/m; Power Drift = 0.18 dB Peak SAR (extrapolated) = 2.65 W/kg SAR(1 g) = 0.762 W/kg; SAR(10 g) = 0.285 W/kg Maximum value of SAR (measured) = 1.86 W/kg 0 dB = 1.86 W/kg = 2.70 dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: CR230205724-20A Page 72 of 94 Plot 72#: LTE Band 41 1RB_ Body Back_2636.5 MHz DUT: Smart Tablet Computer; Type: G3 Tab; Serial: 2295 Communication System: Generic TDD-LTE (0); Frequency: 2636.5 MHz;Duty Cycle: 1:1.58 Medium parameters used (interpolated): f = 2636.5 MHz; σ = 1.998 S/m; ε r = 38.835; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7522; ConvF(7.02, 7.02, 7.02) @ 2636.5 MHz; Calibrated: 2022/5/6  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1354; Calibrated: 2022/10/31  Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412  Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x12x1):Measurement grid:dx=12mm, dy=12mm Maximum value of SAR (measured) = 1.01 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 2.933 V/m; Power Drift = -0.16 dB Peak SAR (extrapolated) = 2.20 W/kg SAR(1 g) = 0.684 W/kg; SAR(10 g) = 0.236 W/kg Maximum value of SAR (measured) = 1.70 W/kg 0 dB = 1.70 W/kg = 2.30 dBW/kg China Certification ICT Co., Ltd (Dongguan) Report No.: CR230205724-20A Page 73 of 94 Plot 73#: LTE Band 41 1RB_ Body Back_High DUT: Smart Tablet Computer; Type: G3 Tab; Serial: 2295 Communication System: Generic TDD-LTE (0); Frequency: 2680 MHz;Duty Cycle: 1:1.58 Medium parameters used: f = 2680 MHz; σ = 2.062 S/m; ε r = 38.432; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration:  Probe: EX3DV4 - SN7522; ConvF(7.02, 7.02, 7.02) @ 2680 MHz; Cal…

Text truncated - open the document above for the full version.

ANWEI commnuication Equipment Co.,Ltd APPROVAL SHEET Customer Youmi Specs G3TAB Part Number AW006-G3-TAB-021-A0 AW006-G3-TAB-022-A0 AW006-G3-TAB-023-A0 Frequency Band 2G:GSM850/900/1800/1900 3G:W1/2/5/8 4G:LTE-B1/2/3/4/5/7/8/12/13/17/ 18/19/20/26/28A/B/66/71+TDD34/38/39/40/41 Color Black Edition REV:A0 Salesperson Mr.Xie Design ZHONG ZHI HUI Structure QIN YUN LIN Confirm Date 2023/3/29 Signing Date Customer confirmation: ANT Manufacturers：ANWEI commnuication Equipment Co.,Ltd Address:2nd Floor, East Block, Building 5, Yifenghua Innovation Industrial Park, Huaning Road, Dalang Street, Longhua District, Shenzhen City, Guangdong Province Project development environment  (Main antenna ) (Working frequency band)：647MHZ~960MHZ 1710~2690MHZ 2G:GSM850/900/1800/1900 3G:W1/2/5/8 4G:LTE-B1/2/3/4/5/7/8/12/13/17/ 18/19/20/26/28A/B/66/71+TDD34/38/39/40/41 (Matcheing network)： (antenna ) (Working frequency band): 647MHZ~960MHZ 1710~2690MHZ 2G:GSM850/900/1800/1900 3G:W1/2/5/8 4G:LTE-B1/2/3/4/5/7/8/12/13/17/ 18/19/20/26/28A/B/66/71+TDD34/38/39/40/41 E1=NC E2=0Ω E3= NC (Matcheing network) DIV Note: DIV antenna only RX （GPS antenna）+（2.4G/5G WIFI/BT antenna） （Working frequency band of GPS antenna）：1559MHZ~1580MHZ （Working frequency band of 5GWIFI antenna）：2400~2500,5150MHZ~5850MHZ (Matcheing network) ANWEI ANT TRP&TIS parameter Summary of G3TAB BAND Channel TRP（dBm） TIS（dBm） FDD B1 L 18.24 M 18.45 H 18.45 -93.41 FDD B2 L 18.23 M 18.62 H 18.89 -94.20 FDD B3 L 17.53 M 17.00 H 17.81 -94.33 FDD B4 L 17.67 M 17.62 H 17.24 -94.70 FDD B5 L 17.39 M 18.04 H 18.60 -92.15 FDD B7 L 18.19 M 19.47 H 18.42 -94.57 FDD B8 L 18.31 M 18.02 H 17.55 -92.03 FDD B12 L 15.60 M 16.10 H 16.17 -92.09 FDD B13 L M 17.32 -92.53 H FDD B17 L 16.31 M 16.34 H 17.14 -92.09 FDD B18 L 16.96 M 18.04 H 18.15 -92.44 FDD B19 L 17.76 M 18.70 H 18.53 -92.42 FDD B20 L 18.56 M 19.99 H 18.73 -93.33 FDD B25 L 17.73 M 18.45 H 18.43 -94.59 FDD B26 L 16.25 M 16.51 H 17.69 -93.64 FDD B28A L 16.97 M 16.52 H 16.73 -92.58 FDD B28B L 16.74 M 17.45 H 17.48 -93.14 FDD B66 L 16.66 M 17.49 H 18.07 -94.53 L 15.20 M 15.61 H 15.17 -90.78 FDD B71 TDD B34 L 18.24 M 19.31 H 18.09 -93.80 TDD B38 L 18.67 M 18.87 H 18.19 -90.23 TDD B39 L 18.41 M 18.37 H 18.54 -92.42 TDD B40 L 16.40 M 16.78 H 16.95 -89.62 TDD B41 L M 18.01 -90.88 H WCDMA-B1 L 18.82 M 18.75 H 18.71 -106.58 WCDMA-B2 L 18.76 M 18.95 H 19.42 -106.85 WCDMA-B4 L 18.31 M 18.29 H 18.32 -106.08 WCDMA-B5 L 17.64 M 18.32 H 18.62 -105.14 WCDMA-B8 L 19.14 M 18.07 H 18.39 -104.26 Channel TRP（dBm） TIS（dBm） GSM850 L 25.72 M 26.49 H 26.86 -103.25 GSM900 L 26.35 M 25.93 H 25.52 -103.77 DCS1800 L 25.16 M 24.99 H 24.54 -105.63 PCS1900 L 24.05 M 24.44 H 25.40 -104.80 2.4G WIFI B模 11M L 14.54 -84.04 M 14.58 -83.96 H 14.34 -83.94 5 G WIFI A模 54M L 12.55 -72.58 M 11.22 -71.72 H 11.41 -72.19 (GPS Test) (Efficiency of GPS antenna)：36% 天线增益(Antenna gain) Standard Band Frequency Gain(dbi) TDD_LTE TDD_B34 2020 1.52 TDD_LTE TDD_B38 2600 1.81 TDD_LTE TDD_B39 1900 1.14 TDD_LTE TDD_B40 2360 0.52 TDD_LTE TDD_B41 2600 1.81 FDD_LTE FDD_B1 1960 1.71 FDD_LTE FDD_B2 1900 1.14 FDD_LTE FDD_B3 1720 1.03 FDD_LTE FDD_B4 1720 1.03 FDD_LTE FDD_B5 820 -0.76 FDD_LTE FDD_B7 2520 1.05 FDD_LTE FDD_B8 900 -1.13 FDD_LTE FDD_B12 711 -2.37 FDD_LTE FDD_B13 782 -2.71 FDD_LTE FDD_B17 711 -2.37 FDD_LTE FDD_B18 820 -0.76 FDD_LTE FDD_B19 820 -0.76 FDD_LTE FDD_B20 820 -0.76 FDD_LTE FDD_B25 1900 1.14 FDD_LTE FDD_B26 820 -0.76 FDD_LTE FDD_B28 711 -2.37 FDD_LTE FDD_B66 1720 1.03 FDD_LTE FDD_B71 693 -3.14 WCDMA WCDMA_B1 1960 1.71 WCDMA WCDMA_B2 1900 1.14 WCDMA WCDMA_B4 1720 1.03 WCDMA WCDMA_B5 820 -0.76 WCDMA WCDMA_B8 900 -1.13 GSM GSM850 820 -0.76 GSM GSM900 900 -1.13 GSM DCS1800 1720 1.03 GSM PCS1900 1900 1.14 5GWIFI 5200 0.88 5GWIFI 5400 2.09 5GWIFI 5800 3.91 2.4GWIFI 2400 0.97 2.4GWIFI 2450 0.97 2.4GWIFI 2500 0.96 BT 2400 0.97 BT 2450 0.97 BT 2500 0.96 GPS 1575 -0.18 antenna PolarGraphs （GPS antenna）+（2.4G/5G WIFI/BT antenna）PolarGraphs

TEST REPORT Applicant: Shenzhen Youmi Intelligent Technology Co., Ltd Address: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China FCC ID: 2ATZ4-G3TAB IC: 26074-G3TAB HVIN: M869YCR100 Product Name: Smart Tablet Computer Standard(s): 47 CFR Part 15, Subpart C(15.247) RSS-247 Issue 2, February 2017 RSS-Gen, Issue 5, February 2021 Amendment 2 ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230205724-00C Date Of Issue: 2023/3/18 Reviewed By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230205724-00C Page 2 of 63 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with …

Text truncated - open the document above for the full version.