2AU29ALTAWSSV2Wall Switch

8. ADJUST MOTOR SPEED 6. ROLLER MODE AND SHEER MODE 7. ADD OR REMOVE ADDITIONAL WALL SWITCH 5. FAVORITE POSITION 2. CHANGE MOTOR DIRECTION (IF NECESSARY) 3. SETTING THE UPPER AND LOWER LIMITS 4. ADJUST LIMITS 1. PAIR / UNPAIR WALL SWITCH Jog x1 Jog x1 Jog x2 Beep x1 Beep x1 Beep x3 CHANNEL OPTIONS *Honeycomb /Cellular and Horizontal Blind Motors DO NOT BEEP. GETTING STARTED It is important to conńm tKat tKe motor is aZaNe and ready to receiYe programming. To do tKis press ùP1ú button on tKe motor less tKan 1 sec to actiYate tKe motor Irom Sleep Mode. Jog x1 or Action on Wall Switch Action on Wall Switch Action on Wall Switch Action on Wall Switch Shade Response Motor Response Motor Response Motor Response a. Press “P1” button (about 2 sec) on the motor head until motor jog x1 and beep x1. b. In the next 10 secs, press and hold “Stop” button on the wall switch until motor jog x2 and beep x3. ADJUST THE UPPER LIMIT a. Press and hold (about 5 sec) “Up” and “Stop” buttons simultaneously until motor jog x1 and beep x1. b. Use “Up” button to raise the shade to the desired highest position, and use “Up” or “Down” button to do the ńnal adjustment iI necessary. c. Press and hold (about 5 sec) “Up” and “Stop” buttons simultaneously until motor jog x2 and beep x3. ROLLER SHADE MODE DeIault mode allows Ior continuous raising/lowering oI shade aIter a short press. a. Press and hold (about 5 sec) “Up” and “Down” buttons simultaneously until motor jog x1. b. Press and hold (about 2 sec) “Stop” button until motor jog x2 and beep x3. USING CURRENT WALL SWITCH a. On the current wall switch, press and hold (about 2 sec) one “P2” button until motor jog x1 and beep x1. b. Once more, on the current wall switch, press and hold (about 2 sec) one “P2” button until motor jog x1 and beep x1. c. On the New wall switch, press and hold (about 2 sec) one “P2” button until motor jog x2 and beep x3. INCREASE MOTOR SPEED a. Press one “P2” button until motor jog x1 and beep x1. b. Press “Up” button until motor jog x1 and beep x1. c. Once more, press “Up” button until motor jog x2 and beep x1. SHEER SHADE MODE - Allows Ior slight adMustment aIter a short press and raising/ lowering oI shade aIter a longer press. a. Press and hold (about 5 sec) “Up” and “Down” buttons simultaneously until motor jog x1. b. Press and hold (about 2 sec) “Stop” button until motor jog x1 and beep x1. DECREASE MOTOR SPEED a. Press one “P2” button until motor jog x1 and beep x1. b. Press “Down” button until motor jog x1 and beep x1. c. Once more, press “Down” button until motor jog x2 and beep x1. HIDE UNUSED CHANNELS SET FAVORITE POSITION a. Use “Up” or “Down” button to move the shade to desired Favorite position. b. Press and hold (about 2 sec) one “P2” button on the back of wall switch until motor jog x1 and beep x1. c. Press and hold (about 2 sec) “Stop” button until motor jog x1 and beep x1. d. Once more, press and hold (about 2 sec) “Stop” button until motor jog x2 and beep x3. DELETE FAVORITE POSITION a. Press and hold (about 2 sec) one “P2” button until motor jog and beep x1. b. Press and hold (about 2 sec) “Stop” button until motor jog and beep x1. c. Once more, press and hold (about 2 sec) “Stop” button until motor jog x1 and long beep x1. ADJUST THE LOWER LIMIT a. Press and hold (about 5 sec) “Down” and “Stop” buttons simultaneously until motor jog x1 and beep x1. b. Use “Down” button to lower the shade to the desired lowest position, and use “Up” or “Down” button to do the ńnal adjustment if necessary. c. Press and hold (about 5 sec) “Down” and “Stop” buttons simultaneously until motor jogs x2 and beeps x3. SEND SHADE TO FAVORITE POSITION Press and hold (about 2 sec) “Stop” button, motor will move to Favorite position. Press “Up” or “Down” button to check if the shade moves in the desired direction. If you need to reverse the direction, press and hold (about 2 sec) “Up” and “Down” buttons simultaneously until motor jog x1 and beep x1. SET UPPER LIMIT a. Press “Up” button to raise the shade, then press “Stop” button when it is in the desired upper limit. b. Press and hold (about 5 sec) “Up” and “Stop” buttons simultaneously until motor jog x2 and beep x3. *The operation is only valid when there are no limits. If the motor has already set the upper and lower limit, then you can only switch direction by pressing “P1” button (about 10 sec) on the motor head until motor jog x3 and beep x3. * Repeat the same procedure to unpair wall switch. *If you exit the limit setting status before you ńnish the limit settings, the motor will take the previous existing limits. *If the motor has no response, it already has a Maximum or Minimum speed. SET LOWER LIMIT a. Press “Down” button to lower the shade, then press “Stop” button when it is in the desired lower limit. b. Press and hold (about 5 sec) “Down” and “Stop” buttons simultaneously until motor jog x2 and beep x3. Action on Motor Action on Wall Switch + Action on Wall Switch Action on Wall Switch Action on Wall Switch Motor Response Motor Response Motor Response Motor Response Motor Response UpDown Stop P1 a. a. a. a. a. a. a. a. b. b. b. b. b. a.b. a. a. c. b. b. b. b. c. c. b. c. c. c. c. c. d. Jog x2 Jog x2 Beep x3 Beep x3 + + Up Up Down Stop Stop Down a. a. b. a. b. b. Jog x1 Jog x2 Beep x1 Beep x3 + + Up Up Up Stop Action on Wall Switch Action on Wall Switch Action on Wall Switch Action on Wall Switch Motor Response Motor Response Motor Response Motor Response Stop Jog x1 Beep x1 + DownStop Down Jog x2 Beep x3 + DownStop Jog x1 Jog x2 Beep x3 + UpDown Stop Action on Wall Switch Action on Wall Switch Motor Response Motor Response Jog x1 Jog x1 Beep x1 Action on Wall Switch Action on Wall Switch Motor Response Motor Response + + or Up Lower Channel Lower Channel Down Higher Channel Higher Channel Stop Jog x1 Jog x2 Jog x1 Beep x1 Beep x3 Beep x1 Current Wall Switch New Wall Switch Current Wall Switch Action on Wall Switch Action on Wall Switch Motor Response Motor Response Jog x1 Jog x1Jog…

Text truncated - open the document above for the full version.

Turnils North America 1750 Satellite Blvd, Suite 100, Buford, Georgia, United States Date: 2023-04-20 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (i) Filing SUBJECT: FCC Application for FCC ID: 2AU29ALTAWSSV2 To Whom It May Concern: Turnils North America certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signatory [Phoenix Lin, Senior Project Manager]

Turnils North America 1750 Satellite Blvd, Suite 100, Buford, Georgia, United States Date: 2023-04-20 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (ii) Filing SUBJECT: FCC Application for FCC ID: 2AU29ALTAWSSV2 To Whom It May Concern: Turnils North America certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signatory [Phoenix Lin, Senior Project Manager]

Turnils North America 1750 Satellite Blvd, Suite 100, Buford, Georgia, United States Rev 1/26/2023 Date: 2023-02-09 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (7) Filing Grantee Code: 2AU29 Turnils North America certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0028959575 Name: Turnils North America Address: 1750 Satellite Blvd, Suite 100, Buford, Georgia, United States Contact Person: Phoenix Lin Tel.: (770) 995-2222 3032 Email: [email protected] Signatory [Phoenix Lin, Senior Project Manager]

TurnilsNorthAmerica 1750SatelliteBlvd,Suite100,Buford,Georgia,UnitedStates --------------------------------------------------------------------------------------------------------------------- Date:2023-04-20 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 FCCID:2AU29ALTAWSSV2 ConfidentialityRequest Towhomitmayconcern, PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentoftheinformationaccompanyingthisapplicationasoutlinedbelow: ☒BlockDiagram ☐Tune-UpInformation ☒ OperationalDescription ☐ SecurityInformation ☒Schematics☐SoftwareDefinedRadio(SDR) Information ☐ PartsList Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrantfor thisapplication. Sincerely, TurnilsNorthAmerica ------------------------------- PhoenixLin/ProjectManager

TurnilsNorthAmerica 1750SatelliteBlvd,Suite100,Buford,Georgia,UnitedStates -------------------------------------------------------------------------------- (FCCID ： 2AU29ALTAWSSV2) POWEROFATTORNEY DATE:2023-04-20 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 ToWhomItMayConcern: We,theundersigned,herebyauthorizeWaltekTestingGroup(Shenzhen)Co.,Ltd. JandySoonourbehalf,toapplytotheFederalCommunicationsCommissiononour equipment.AnyandallactscarriedoutbyWaltekTestingGroup(Shenzhen)Co., Ltd.JandySoonourbehalfshallhavethesameeffectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct. We,TurnilsNorthAmericaarenotsubjecttoadenialoffederalbenefits pursuanttoSection5301oftheAnti-DrugActof1988,21USC853a,andnoparty totheapplicationissubjecttoadenialoffederalbenefitspursuanttothat section. Sincerely, TurnilsNorthAmerica ---------------------------- PhoenixLin/ProjectManager

TurnilsNorth America 1750SatelliteBlvd,Suite100,Buford,Georgia,UnitedStates --------------------------------------------------------------------------------------------------------------------- Supplier’s DeclarationOf Conformity for the FCC SDoC Procedure The following Equipment adapt FCC SDoC Procedure according to FCC part 2.906 : Product Name: Wall Switch Brand Name: -- Model Number: 15C-Surface Mounted WS Report Number: WTN22X07151272W002 It ’s herewithconfirmedto complywith the requirementsof FCC Part 15 Rules. Operationis subjectto the followingtwo conditions: (1) This devicemay not causeharmfulinterference,and (2) This devicemustacceptany interferencereceived,includinginterferencethat may causeundesiredoperation. It is understoodthat eachunit marketedis identicalto the deviceas tested,and any changesto the devicethat couldadverselyaffectthe emissioncharacteristicswill requireretest. The followingimporter/ responsiblepartyin UnitedStates: CompanyName:TurnilsNorthAmerica CompanyAddress:1750SatelliteBlvd,Suite100, Buford,Georgia,UnitedStates Telephone:770-995-2222-3032 Fax: 770-995-2210 Personis responsiblefor markingthis declaration: PhoenixLin Name(Full name) ProjectManager Position/ Title 2023-04-20 LegalSignatureDate

ReferenceNo.:WTN22X07151272W001Page2of10 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EXHIBIT2-EUTEXTERNALPHOTOGRAPHS EUTView1 EUTView2 ReferenceNo.:WTN22X07151272W001Page3of10 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EUTView3 EUTView4 ReferenceNo.:WTN22X07151272W001Page4of10 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EUTView5 EUTView6

ReferenceNo.:WTN22X07151272W001Page1of10 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn ANNEX EXHIBIT1-PRODUCTLABELING ProposedFCCIDLabelFormat Specifications:Thelabelshallbesecurelyaffixedtoapermanentlyattachedpartofthedevice,inalocationwhere itisvisibleoreasilyaccessibletotheuser,andshallnotbereadilydetachable.Thelabelshallbesufficiently durabletoremainfullylegibleandintactonthedeviceinallnormalconditionsofusethroughoutthedevice’s expectedlifetime. ProposedLabelLocationonEUT FCCIDLabel Location

ReferenceNo.:WTN22X07151272W001Page5of10 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EXHIBIT3-EUTINTERNALPHOTOGRAPHS EUTHousingandBoard View1 EUTHousingandBoard View2 ReferenceNo.:WTN22X07151272W001Page6of10 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn Solder Board-ComponentView 1 Solder Board-ComponentView 2 ReferenceNo.:WTN22X07151272W001Page7of10 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn Solder Board-ComponentView 3 AntennaView

1.RFExposureRequirements 1.1GeneralInformation ClientInformation Applicant:TurnilsNorthAmerica Addressofapplicant:1750SatelliteBlvd,Suite100,BufordGA30518 Manufacturer:TurnilsNorthAmerica Addressofmanufacturer:1750SatelliteBlvd,Suite100,BufordGA30518 GeneralDescriptionofEUT: ProductName:WallSwitch TradeName:/ ModelNo.:15C-SurfaceMountedWS AddingModel(s):/ RatedVoltage:BatteryDC1.5*2V PowerAdaptor:/ FCCID:2AU29ALTAWSSV2 EquipmentType:/ TechnicalCharacteristicsofEUT: FrequencyRange:433.925MHz Max.FieldStrength:433.925MHz:79.41dBuV/m(3m) DataRate:/ Modulation:FSK AntennaType:PCBAntenna AntennaGain:0dBi 1.2RFExposureExemption Accordingto§1.1307(b)(3)andKDB447498D04InterimGeneralRFExposureGuidancev01,system operatingundertheprovisionsofthissectionshallbeoperatinginamannerthatthepublicisnotexposedto radiofrequencyenergylevelinexcesslimitformaximumpermissibleexposure. OptionA:FCCRulePart1.1307(b)(3)(i)(A):Theavailablemaximumtime-averagedpowerisnomorethan 1mW,regardlessofseparationdistance. OptionB:FCCRulePart1.1307(b)(3)(i)(B):Theavailablemaximumtime-averagedpoweroreffective radiatedpower(ERP),whicheverisgreater,islessthanorequaltothethresholdP th (mW)describedinthe followingformula.P th isgivenby: OptionC:FCCRulePart1.1307(b)(3)(i)(C):Theminimumseparationdistance(Rinmeters)fromthebodyof anearbypersonforthefrequency(finMHz)atwhichthesourceoperates,theERP(watts)isnomorethanthe calculatedvalueprescribedforthatfrequency.Rmustbeatleastλ/2π,whereλisthefree-spaceoperating wavelengthinmeters. SingleRFSourcesSubjecttoRoutineEnvironmentalEvaluation RFSourcefrequency(MHz)ThresholdERP(watts) 0.3-1.341,920R 2 1.34-303,450R 2 /f 2 30-3003.83R 2 300-1,5000.0128R 2 f 1,500-100,00019.2R 2 ForMultipleRFsources:FCCRulePart1.1307(b)(3)(ii): (A)Theavailablemaximumtime-averagedpowerofeachsourceisnomorethan1mWandthereisa separationdistanceoftwocentimetersbetweenanyportionofaradiatingstructureoperatingandthe nearestportionofanyotherradiatingstructureinthesamedevice,exceptifthesumofmultiplesourcesis lessthan1mWduringthetime-averagingperiod,inwhichcasetheymaybetreatedasasinglesource (separationisnotrequired). (B)InthecaseoffixedRFsourcesoperatinginthesametime-averagingperiod,orofmultiplemobileor portableRFsourceswithinadeviceoperatinginthesametimeaveragingperiod,ifthesumofthe fractionalcontributionstotheapplicablethresholdsislessthanorequalto1asindicatedinthefollowing equation. 1.3CalculatedResult Radio Access Technology Prediction Frequency Max.Field Strength Antenna Gain Output Power Tune-Up Power ERP (MHz)(dBuV/m)(dBi)(dBm)(dBm)(dBm) SRD433.92579.410-15.85-15.00-17.15 Frequency Option Min.DistanceMax.PowerExposureLimit Ratio Result (MHz)(cm)(dBm)(mW)(mW)Pass/Fail 433.925B0.5-15.000.0323.170.01Pass Note:1.EIRP=E-104.8+20logD;OutputPower=EIRP-AntennaGain; ERP=EIRP-2.15dB 2.OptionA,BandCrefersasclause1.2. 3.ForoptionB,Max(time-averagedpower,effectiveradiatedpower(ERP))convertstoMax.Power. ForoptionC,ERPconvertstoMax.Power; 4.ForoptionB,P th (mW)convertstoExposureLimit(mW);ForoptionC,ERP(W)convertsto ExposureLimit(mW). 5.Ratio=Tune-UpERP(mW)/ExposureLimit(mW) ModeforSimultaneousMulti-bandTransmission: RadioAccess Technology Ratio1Ratio2Ratio3 Simultaneous Ratio Limit Result Pass/Fail /////// Result:Pass

SRD Technical Specification

WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 1 of 24 TESTREPORT ReferenceNo.......................:WTN22X07151272W001 FCCID....................................:2AU29ALTAWSSV2 Applicant...............................:TurnilsNorthAmerica Address.................................:1750SatelliteBlvd,Suite100,BufordGA30518 Manufacturer........................:ThesameasApplicant Address.................................:ThesameasApplicant ProductName......................:WallSwitch ModelNo...............................:15C-SurfaceMountedWS Standards..............................:FCCPart15.231 DateofReceiptsample .....: 2022-07-25 DateofTest...........................:2022-07-25to2022-08-23 DateofIssue ........................: 2022-08-23 TestReportFormNo.......... : WTX_Part15_231W TestResult............................:Pass Remarks: Theresultsshowninthistestreportreferonlytothesample(s)tested,thistestreportcannotbe reproduced,exceptinfull,withoutpriorwrittenpermissionofthecompany.Thereportwouldbeinvalidwithout specificstampoftestinstituteandthesignaturesofapprover. PreparedBy: WaltekTestingGroup(Shenzhen)Co.,Ltd. Address:1/F.,Room101,Building1,HongweiIndustrialPark,Liuxian2ndRoad, Block70Bao'anDistrict,Shenzhen,Guangdong,China Tel.:+86-755-33663308Fax.:+86-755-33663309Email:[email protected] Testedby:Approvedby: JackHuangSilinChen ReferenceNo.:WTN22X07151272W001 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cnPage 2 of 24 TABLEOFCONTENTS 1.GENERALINFORMATION...................................................................................................................................4 1.1PRODUCTDESCRIPTIONFOREQUIPMENTUNDERTEST(EUT).............................................................................4 1.2TESTSTANDARDS...................................................................................................................................................5 1.3TESTMETHODOLOGY.............................................................................................................................................5 1.4TESTFACILITY.......................................................................................................................................................5 1.5EUTSETUPANDTESTMODE................................................................................................................................6 1.6MEASUREMENTUNCERTAINTY..............................................................................................................................7 1.7TESTEQUIPMENTLISTANDDETAILS....................................................................................................................8 2.SUMMARYOFTESTRESULTS..........................................................................................................................10 3.ANTENNAREQUIREMENT.................................................................................................................................11 3.1STANDARDAPPLICABLE.......................................................................................................................................11 3.2TESTRESULT........................................................................................................................................................11 4.RADIATEDEMISSIONS.......................................................................................................................................12 4.1STANDARDAPPLICABLE.......................................................................................................................................12 4.2TESTPROCEDURE.................................................................................................................................................13 4.3CORRECTEDAMPLITUDE&MARGINCALCULATION...........................................................................................14 4.4SUMMARYOFTESTRESULTS/PLOTS....................................................................................................................14 5.20DBBANDWIDTH................................................................................................................................................17 5.1STANDARDAPPLICABLE.......................................................................................................................................17 5.1TESTPROCEDURE.................................................................................................................................................17 5.2SUMMARYOFTESTRESULTS/PLOTS....................................................................................................................17 6.TRANSMISSIONTIME.........................................................................................................................................19 6.1STANDARDAPPLICABLE.......................................................................................................................................19 6.2TESTPROCEDURE.................................................................................................................................................19 6.3SUMMARYOFTESTRESULTS/PLOTS....................................................................................................................19 7.DUTYCYCLE..........................................................................................................................................................21 7.1STANDARDAPPLICABLE.......................................................................................................................................21 7.2TESTPROCEDURE.................................................................................................................................................21 7.3SUMMARYOFTESTRESULTS/PLOTS...................................................................................................................…

Text truncated - open the document above for the full version.

ReferenceNo.:WTN22X07151272W001Page8of10 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn EXHIBIT4-TESTSETUPPHOTOGRAPHS RadiationEmissionTest Setup(Below30MHz) RadiationEmissionTest Setup(30MHzto1GHz) ReferenceNo.:WTN22X07151272W001Page9of10 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn RadiationEmissionTest Setup(1GHzto18GHz) RadiationEmissionTest Setup(Above18GHz) ReferenceNo.:WTN22X07151272W001Page10of10 WaltekTestingGroup(Shenzhen)Co.,Ltd. Http://www.waltek.com.cn *****ENDOFREPORT*****