2AU29AMP28BDCDC Tubular Motor with built-in RF control

AMP25B Instruction Attention -1- The motor is suitable for motorization of roller blinds, sheer shadings, roman shades, and zebra shades. Never drop, knock, drill or submerge the motor. Keep the power cable in right position as following. Important safety instructions to be read before installation. Incorrect installation can lead to serious injury and will void manufacturer’s liability and warranty. Declarations Do not dispose of in general waste. Please recycle batteries and damaged electrical products appropriately. -2- Safety 1. Do not expose motor to humid, damp or extreme temperature conditions. 2. Do not drill into motor. 3. Do not cut the antenna and keep it clear from metal objects. 4. Do not allow children to play with this device. 5. If power cable or connector is damaged, do not use. 6. Ensure correct crown and drive adaptor are used. 7. Ensure power cable and aerial is clear and protected from moving parts. 8. Cable routed through walls shall be properly isolated. 9. Motor is to be mounted in horizontal position only. 10. Before installation, remove unnecessary cords and disable equipment not needed for powered operation. 11. Installation and programming to be performed by a qualified professional, use or modification outside the scope of this instruction may void warranty. Features Fields of Application Specifications Following data for reference Working temperature: -10°C ~ +50°C Input Voltage: USB 5V 1A / USB 5V 2A Radio Frequency: 433.925MHz Maximum Running Time: 6 minutes Model Rated Torque (N.m) Rated Speed (rpm) Rated Power (W) AMP25B - 0.7/340.7348 AMP25B -1.1/281.1288 Charging Instructions This motor has a built in Li-ion battery pack with integrated charge management. Max power input for recharging: 5V 2A. Before first use please charge motor for 6 hours. Using 5V charger (most phones charger is 5V ) . During operation, when the motor starts, the buzzer will beep 10 times, indicating a low-voltage alarm and needs to be charged. During operation, the voltage was detected to be too low, the battery was about to run out, the battery stopped running and needed to be recharged. Rechargeable Battery Blinking red: Low battery alert Blinking green: Charging is processing Solid green: Battery has finished charging. FCC Text - text 01 Add A zoom in on the charging port P1 Button Instructions P1 button Lithium Battery Switch LED light Micro-USB Port Add visual explanation of P1 - file 02 Sheer Roller Revolve Roman shades Working temperature: -10º C ~ +50º CRadio Frequency: 433.925 MHz Input Voltage: USB 5V 1A / USB 5V 2AMaximum Running Time: 6 minutes Model Rated Torque (N.m) Rated Speed (RPM) Rated Power (W) AMP28BDC - 2.0/282.02822 SettingsSteps 1PairingP1 (hold down for 2s) > Stop (hold down for 2s) 2Switch Rotating DirectionUp + Down (hold down for 2s) 3Setting Upper & Lower Limits 4Add / Remove Favorite PositionP2 > Stop > Stop 5Roller Mode & Sheer Mode SwitchUp + Down (hold down for 5s) > Stop 6Adjust Limits 7Pair / Unpair Additional EmitterP2 (existing) > P2 (existing) > P2 (new) 8Speed Regulation IssuesPossible CausesSolution External battery pack is depleted Recharge with compatible AC adaptor and check connection and positioning of solar PV panel Insufficient charging from Solar PV Panel Check connection and orientation of solar PV panel Remote control battery is dischargedReplace battery Battery is inserted incorrectly into remote control Check battery polarity The motor is not respondingRadio interference / shielding Ensure remote control and the antenna on the motor are positioned away from metal objects Receiver is far away from Remote Control Move remote control to a closer position Power failureCheck power supply to motor is connected and active Incorrect wiring Check that wiring is connected correctly (refer to motor installation instructions) Motor beeps 10 times when in use Battery voltage is low / PV (solar panel issue) Recharge with AC adapter or check connection and positioning of solar PV panel Always reserve an individual channel for programming functions SYSTEM BEST PRACTICE - Provide an extra 15 channel remote in your multi-motor projects that provides individual control for each motor for programming purposes Place all other motors into sleep mode (ref to P1 button instructions) The motor is suitable for motorization of roller shades, sheer shades, roman shades, and revolve shades. Do not dispose of in general waste. Please recycle batteries and damaged electrical products appropriately. RollerSheerBandedRoman Upper Limit: Up (hold down for 2s) > Up + Stop (hold down for 2s) Upper Limit: Up + Stop (hold down for 5s) > Up or Down > Up + Stop (hold down for 2s) Cannot program a single motor (multiple motors respond) Multiple motors are paired to the same channel. Acceleration: P2 > Up > Up Lower Limit: Down (hold down for 2s) > Down + Stop (hold down for 2s) Lower Limit: Down + Stop (hold down for 5s) > Up or Down > Down + Stop (hold down for 2s) Deceleration: P2 > Down > Down Please scan QR code to see more AMP ™ product information 1 2 3 4 ×××× 5 Test Motor 1 2 6 10 14 Activate Pairing Mode Sleep Mode Reverse Direction Reset To Factory Settings Approx. 2 sec. Happening as you press for 2 seconds Happening as you press for 1 second Happening as you press for 6 seconds Happening as you press for 10 seconds Happening as you press for 14 seconds when released when released when released when released when released Approx. 6 sec. Approx. 10 sec. Approx. 14 sec. Until Shade: Until Shade: Motor Response: Motor Response: Motor Response: Until Shade: Until Shade: Motor Response: Beep x1 Beep x2 Jog x3 Jog x4 Jog x1 Jog x2 Beep x3 Beep x4 Less than 1 sec. Press P1 Press P1 Press P1 Press P1 Press P1 Motor Response: Wakes & Runs AMP28BDC Declarations Fields of Application Specifications Quick Index Attention Safety Instructions Troubleshooting Charging Instructions P1 Button Instructions Never drop, knock, drill or submerge the motor. Keep the power cable in t…

Text truncated - open the document above for the full version.

With Applicant Company Letterhead Certification Designating a U.S. Agent for Service of Process Date: 05-18-2023 Ref: Section 2.911(d)(7) filing FCC ID: 2AU29AMP28BDC To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA [Turnils North America] (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. Contact Person: Phoenix Lin Company Name: Turnils North America Company Address: 1750 Satellite Blvd, Suite 100, Buford, Georgia, United States Email: [email protected] Sincerely yours, Contact Person: Phoenix Lin Company Name: Turnils North America Company Address: 1750 Satellite Blvd, Suite 100, Buford, Georgia, United States Email: [email protected]

Applicant Company Letterhead Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 05-18-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: 2AU29AMP28BDC Turnils North America (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Printed Name: Phoenix Lin Title: Project Manager Address: 1750 Satellite Blvd, Suite 100, Buford, Georgia, United States Tel.: 4044993854 Email: [email protected]

Applicant Company Letterhead Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 05-18-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: 2AU29AMP28BDC Turnils North America (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Phoenix Lin Title: Project Manager Address: 1750 Satellite Blvd, Suite 100, Buford, Georgia, United States Tel.: 4044993854 Email: [email protected]

TCB Authority to Act as Agent Number: MS‐0045317 Revision: 0 Effective date: Oct 8, 2021 Page 1 of 1 Authority to Act as Agent Date: __20230105____________ TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern: I appoint TUV Rheinland (Shenzhen) Co., Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Turnils North America, 1750 Satellite Blvd,Suite 100,Buford GA 30518. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date: ____20230105_______________ Agreement is valid for 12 months from the above date. By: __________________________ ____ Phoenix Lin ____________ (Signature) (Print name) _ Project Manager___________ ____4044993854____________ (Title) (Telephone) On behalf of: __ Turnils North America_______ (Company Name)

Antenna Gain Info Manufacturer: Ningbo Dooya Mechanic & Electronic Technology Co., Ltd. Address: No.168 Shengguang Road, Luotuo, Zhenhai, Ningbo 315202 Zhejiang P.R. China. Parameter: Frequency Range (MHz) 433.05 MHz to 434.79 MHz Bandwidth (KHz) 100KHz Input Impendence (Ω) 50Ω Feeding Point Direct connect mode Antenna Type: Line Length 177.5mm V.S.W.R ≤2.5 Gain (dBi) <-2dBi

Confidentiality Letter Date:2023-05-18 Subject: Confidentiality Request for FCC ID: 2AU29AMP28BDC and IC ID: 25624-AMP28BDC Pursuant toFCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subjectFCC/ICapplication be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Part List/Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent User’s Manual Turnils North America has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04- 1705. Sincerely, By: Phoenix Lin/Project Manager (Signature) (Print name/Title)

Photo Documentation Report Number: Attachment of CN23C44Q 001 Model:1039246 Page 1 of 6 External: Overview External: Button

70X35mm UV油墨 校对 设计 适用产品 尺 寸 材 质 油 墨 印刷工艺 是否含流水码 或条形码 审定 版本 日期 制图 是否覆膜 颜 色 使用规范 备注: 工艺描述 客户号 杜亚机电 铭牌 JS-6-15 0.05±0.01mm（厚度） （长*宽） W1053-17-01 贴电机 覆哑膜 0.25#亚银轮胎胶 W1053-17-01 W1053# DM28CEQ/SH-2/28 CBG系列 图纸认证说明 (此尺寸为本图内1:1尺寸) 5.2mm 7.28mm 7.2mm 5.15mm 彩色印刷 C:80% M:8% Y:13% K:0%C:21% M:15% Y:14% K:0% 2023-4-27魏娟 张琴 A-00 含PO号 含变量 PO号随订单改变，每票都不相同，下单前请咨询业务。 AMP28BDC-2/28 DC Tubular Motor with built-in RF control FCC ID: 2AU29AMP28BDC IC: 25624-AMP28BDC DC 12V 2Nm 28r/min 22W Ø28 1.60A IP20 BI-DIRECTIONAL MADE IN PRC PN: 1039246 196438PO # 符合：ROHS REACH法规要求

Photo Documentation Report Number: Attachment of CN23C44Q 001 Model:1039246 Page 2 of 6 Internal: Top Internal: Bottom Photo Documentation Report Number: Attachment of CN23C44Q 001 Model:1039246 Page 3 of 6 RF Module

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN23O3BT 001 Auftrags-Nr.: Order no.: 180259054 Seite 1 von 3 Page 1 of 3 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2023.03.20 Auftraggeber: Client: Turnils North America 1750 Satellite Blvd, Suite 100, Buford GA 30518 Prüfgegenstand: Test item: DC Tubular Motor with built-in RF control Bezeichnung / Typ-Nr.: Identification /Type no.: 1039246 Auftrags-Inhalt: Order content: TÜV Rheinland FCC & ISED Service Prüfgrundlage: Test specification: FCC 47 CFR Part 2.1091 RSS-102 Issue 5 Wareneingangsdatum: Date of sample receipt: 2023.04.10 Refer to Photo Documentation Prüfmuster-Nr.: Test sample no: A003453286-001-002 Prüfzeitraum: Testing period: 2023.04.11 - 2023.05.11 Ort der Prüfung: Place of testing: TÜV Rheinland / CCIC (Ningbo) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland / CCIC (Ningbo) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: genehmigt von: authorized by: Datum: Date: 2023.05.22 Ausstelldatum: Issue date: 2023.05.22 Stellung / Position:Keda Zhou/PEStellung / Position:Feng Liang/Reviewer Sonstiges / Other: This report is valid with the report CN23C44Q 001. FCC ID: 2AU29AMP28BDC ISED: 25624-AMP28BDC Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende:1 = sehr gut2 = gut3 = befriedigend4 = ausreichend5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n)F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbarN/T = nicht getestet * Legend:1 = very good2 = good3 = satisfactory4 = sufficient5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s)N/A = not applicableN/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland / CCIC (Ningbo) Co., Ltd. 3F, building C13, R&D Park, No.32 Lane 299 Guanghua Road National Hi-Tech Zone, Ningbo 315048, P.R. China Mail: [email protected] · Web: www.tuv.com Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN23O3BT 001 Seite 2 von 3 Page 2 of 3 Radio Frequency Exposure Compliance 1. FCC Electromagnetic Fields Test Specification Test standard : FCC 47 CFR Part 2.1091 CFR47 FCC Part 1.1310 MPE Calculation: Mode Maximum Electric Field dBuV/m @3m Max e.i.r.p. (mW) Distance (cm) Power Density (mW/ cm 2 ) Power Density Limit (mW/ cm 2 ) Verdict A 97.5 1.687 20 3.4×10 -4 0.289 Pass Remark: dBuV/m=dBm-20lg(d)+104.77, the data comes from the report CN23C44Q 001. Conclusion: EUT is compliance with the FCC RF exposure. Result: Pass Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN23O3BT 001 Seite 3 von 3 Page 3 of 3 2. IC Electromagnetic Fields Test Specification Test standard : RSS-102 Issue 5 MPE Calculation: Mode Maximum Electric Field dBuV/m @3m Max e.i.r.p. (mW) Distance (cm) Exemption Limits maximum e.i.r.p (W) Verdict A 97.5 1.687 52 Pass Remark: The data comes from the report CN23C44Q 001. Conclusion: EUT is compliance with the IC RF exposure. -- The END -- Result: Pass

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN23C44Q 001 Auftrags-Nr.: Order no.: 180259054 Seite 1 von 23 Page 1 of 23 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2023.03.20 Auftraggeber: Client: Turnils North America 1750 Satellite Blvd, Suite 100, Buford GA 30518 Prüfgegenstand: Test item: DC Tubular Motor with built-in RF control Bezeichnung / Typ-Nr.: Identification /Type no.: 1039246 Auftrags-Inhalt: Order content: TÜV Rheinland FCC & ISED Service Prüfgrundlage: Test specification: FCC 47 CFR Part 15.203 FCC 47 CFR Part 15.231 FCC Part 15, Subpart B:2021 RSS-210 Issue 10 RSS-Gen Issue 5 ICES-003 Issue 7:2020 Wareneingangsdatum: Date of sample receipt: 2023.04.10 Refer to Photo Documentation Prüfmuster-Nr.: Test sample no: A003453286-001-002 Prüfzeitraum: Testing period: 2023.04.11 - 2023.05.11 Ort der Prüfung: Place of testing: Refer to section 1.1 Prüflaboratorium: Testing laboratory: TÜV Rheinland / CCIC (Ningbo) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: genehmigt von: authorized by: Datum: Date: 2023.05.22 Ausstelldatum: Issue date: 2023.05.22 Stellung / Position:Keda Zhou/PEStellung / Position:Feng Liang/Reviewer Sonstiges / Other: FCC ID: 2AU29AMP28BDC ISED: 25624-AMP28BDC Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende:1 = sehr gut2 = gut3 = befriedigend4 = ausreichend5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n)F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbarN/T = nicht getestet * Legend:1 = very good2 = good3 = satisfactory4 = sufficient5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s)N/A = not applicableN/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland / CCIC (Ningbo) Co., Ltd. 3F, building C13, R&D Park, No.32 Lane 299 Guanghua Road National Hi-Tech Zone, Ningbo 315048, P.R. China Mail: [email protected] · Web: www.tuv.com Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN23C44Q 001 Seite 2 von 23 Page 2 of 23 Test Summary 4.1.1 ANTENNA REQUIREMENT Result: Pass 4.1.2 DEACTIVATION OF THE TRANSMISSION Result: Pass 4.1.3 20DB EMISSION BANDWIDTH Result: Pass 4.1.4 99% BANDWIDTH MEASUREMENT Result: Pass 4.1.5 FIELD STRENGTH OF FUNDAMENTAL AND UNWANTED EMISSIONS Result: Pass 4.2.1 MAINS TERMINAL CONTINUOUS DISTURBANCE VOLTAGE Result: Pass 4.2.2 RADIATED DISTURBANCE Result: Pass Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN23C44Q 001 Seite 3 von 23 Page 3 of 23 Contents 1. TEST SITES ....................................................................................................................................................... 4 1.1 TEST FACILITIES............................................................................................................................................... 4 1.2 LIST OF TEST AND MEASUREMENT INSTRUMENTS ........................................................................................... 4 1.3 UNCERTAINTY OF MEASUREMENT ................................................................................................................... 4 2. GENERAL PRODUCT INFORMATION ....................................................................................................... 5 2.1 PRODUCT FUNCTION AND INTENDED USE ........................................................................................................ 5 2.2 RATINGS AND SYSTEM DETAILS ...................................................................................................................... 5 2.3 INDEPENDENT OPERATION MODES .................................................................................................................. 5 2.4 NOISE GENERATING AND NOISE SUPPRESSING PARTS ..................................................................................... 5 2.5 SUBMITTED DOCUMENTS ................................................................................................................................. 5 3. TEST SET-UP AND OPERATION MODES .................................................................................................. 6 3.1 PRINCIPLE OF CONFIGURATION SELECTION ..................................................................................................... 6 3.2 TEST OPERATION AND TEST SOFTWARE .......................................................................................................... 6 3.3 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT ....................................................................................... 6 3.4 COUNTERMEASURES TO ACHIEVE ERM COMPLIANCE ..................................................................................... 6 3.5 TEST SET-UP ..................................................................................................................................................... 7 4. TEST RESULTS ................................................................................................................................................ 8 4.1 TRANSMITTER REQUIREMENT & TEST SUITES ................................................................................................. 8 4.1.1 Antenna Requirement ............................................................................................................................. 8 4.1.2 Deactivation of the Transmission ...............................................…

Text truncated - open the document above for the full version.

Photo Documentation Report Number: Attachment of CN23C44Q 001 Model:1039246 Page 5 of 6 Test Set-up: Conducted emission 150KHz-30MHz Test Set-up: Radiated spurious emission Below 1GHz Photo Documentation Report Number: Attachment of CN23C44Q 001 Model:1039246 Page 6 of 6 Test Set-up: Radiated spurious emission 1GHz-5GHz