2AU2C-F15-CSmart Pet Feeder

Shenzhen Qianhai Runway Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 8/29/2024 U.S. Agent Designation [Shenzhen Qianhai Runway Technology Co., Ltd.] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: [2AU2C-F15-C]): Name and company of U.S. agent: Stone Trading Limited Physical U.S. address of agent: 6547 N Academy Blvd #2266,Colorado Springs,CO 80918,United States FRN of U.S. agent: 0033401936 Email address of U.S. agent: [email protected] [Stone Trading Limited] acknowledges their obligation to accept service of process on behalf of [Shenzhen Qianhai Runway Technology Co., Ltd.]. [Shenzhen Qianhai Runway Technology Co., Ltd.] with the FRN [0028954667] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature [Name] Ma Juan [Title] Manager [Company] Shenzhen Qianhai Runway Technology Co., Ltd. [Name of U.S. agent] Dongmei Fang [Title of U.S. agent] Manager [Company of U.S. agent] Stone Trading Limited 48_[mo del] US_Agent_2.911(d)(7) - U, V04

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows: We, applicant Company Name: Shenzhen Qianhai Runway Technology Co., LTD Address: Room 201, Block A, No.1, Qianwan Road 1, Qianhai Shenzhen Hong Kong Cooperation Zone, Shenzhen, China Phone: +86-13603061340 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024-08-29 Signature Date Printed Name of Signee / Title: Juan Ma / Manager Company: Shenzhen Qianhai Runway Technology Co., LTD Address: Room 201, Block A, No.1, Qianwan Road 1, Qianhai Shenzhen Hong Kong Cooperation Zone, Shenzhen, China Phone: +86-13603061340 Email: [email protected]

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2AU2C-F15-C F15-C We, applicant Company Name: Shenzhen Qianhai Runway Technology Co., LTD Address: Room 201, Block A, No.1, Qianwan Road 1, Qianhai Shenzhen Hong Kong Cooperation Zone, Shenzhen, China Phone: +86-13603061340 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024-08-29 Signature Date Printed Name of Signee / Title: Juan Ma / Manager Company: Shenzhen Qianhai Runway Technology Co., LTD Address: Room 201, Block A, No.1, Qianwan Road 1, Qianhai Shenzhen Hong Kong Cooperation Zone, Shenzhen, China Phone: +86-13603061340 Email: [email protected]

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows: We, applicant Company Name: Shenzhen Qianhai Runway Technology Co., LTD Address: Room 201, Block A, No.1, Qianwan Road 1, Qianhai Shenzhen Hong Kong Cooperation Zone, Shenzhen, China Phone: +86-13603061340 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024-08-29 Signature Date Printed Name of Signee / Title: Juan Ma / Manager Company: Shenzhen Qianhai Runway Technology Co., LTD Address: Room 201, Block A, No.1, Qianwan Road 1, Qianhai Shenzhen Hong Kong Cooperation Zone, Shenzhen, China Phone: +86-13603061340 Email: [email protected]

Short Term Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we request short term confidentiality prior to marketing the device for the documentation of the following products: FCC ID Model name 2AU2C-F15-C F15-C For the products listed above, we request short term confidentiality for all applicable exhibits as there are: • External photos • Internal photos • Test setup photos • User manual The above listed exhibits contain business sensitive information which we wish to keep confidential until the actual marketing of our device, that is planned for: Short term confidentiality release date: < 180 days after issue of grant > If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024-08-29 Signature Date Printed Name of Signee / Title: Juan Ma / Manager Company: Shenzhen Qianhai Runway Technology Co., LTD Address: Room 201, Block A, No.1, Qianwan Road 1, Qianhai Shenzhen Hong Kong Cooperation Zone, Shenzhen, China Phone: +86-13603061340 Email: [email protected]

Page 1 of 1 Rev.2.0 Shenzhen Qianhai Runway Technology Co., LTD WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2AU2C-F15-C Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels can’t be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note: 1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo- location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following: Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Juan Ma / Manager Signature: Phone: +86-13603061340 Email: [email protected] Date: 2024-08-29

Back of EUT Label Label Location Smart Pet Feeder Model No.: F15-C FCC ID: 2AU2C-F15-C This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b) FCC ID: 2AU2C-F15-C EUT Specification EUT Smart Pet Feeder Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.24GHz WLAN: 5.745GHz ~ 5.825GHz Others: 2.402GHz~2.480GHz BLE Device category Portable (<20cm separation) Mobile (>20cm separation) Others ___ Exposure classification Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure (S=1mW/cm2) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Evaluation applied MPE Evaluation SAR Evaluation Limits for Maximum Permissible Exposure(MPE) Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density(mW/cm 2 ) Average Time (A) Limits for Occupational/Control Exposures 300-1500 -- -- F/300 6 1500-100000 -- -- 5 6 (B) Limits for General Population/Uncontrol Exposures 300-1500 -- -- F/1500 6 1500-100000 -- -- 1 30 Friis transmission formula: Pd=(Pout*G)\(4*pi*R2) Where Pd= Power density in mW/cm 2 Pout=output power to antenna in Mw G= gain of antenna in linear scale Pi=3.1416 R= distance between observation point and center of the radiator in cm Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Measurement Result BLE worst case: Operating Mode Channel Frequency Measured Power Target Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm 2 ) (MHz) (dBm) (dBm) (dBm) (dBm) (dBi) (mW/ cm 2 ) BLE 2402 -1.42 -1 ±1 0 -8.02 0.0002 1 2.4GHz WiFi worst case: Operating Mode Channel Frequency Measured Power Target Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm 2 ) (MHz) (dBm) (dBm) (dBm) (dBm) (dBi) (mW/ cm 2 ) 802.11g 2462 17.75 18 ±1 19 3.42 0.1746 1 5GHz WiFi worst case: Operating Mode Channel Frequency Measured Power Target Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm 2 ) (MHz) (dBm) (dBm) (dBm) (dBm) (dBi) (mW/ cm 2 ) 802.11a 5180 12.91 13 ±1 14 2.96 0.0497 1 Note: 1. 2.4G WiFi and 5G WiFi do not support simultaneous transmission. 2. BLE+2.4G WiFi simultaneous: (0.0002+0.1746)/1=0.1748/1=0.1748 < 1 3. BLE+5G WiFi simultaneous: (0.0002+0.0497)/1=0.0499/1=0.0499 < 1 Test Result: Pass

SPECIFICATION ShenzhenGuandetongElectronicLimited 深圳市冠得通电子有限公司 ShenzhenGuandetongElectronicCo.,Ltd. 2.4G/5.8GFPC天线 （1.13线灰*150MM） 产品规格书 客户广州佳可频段 2400-2500MHz 5150-5800MHZ 项目名称版本A1 客户料号冠得通料号 冠得通编号 RF设计肖彬射频经理刘亮 结构设计王栋结构经理王华 技术总监JREN日期2023-12-20 客户确认： 装配是否符合贵司要求：□ OK □ NG 深 圳 市冠得 通 电 子有限 公 司 保密要求 本公司已拥有专有技术所提供的资料，这些专有资料应严加保密，在未经深圳冠得通电子有限公司事先书面同意的时不允许 透露给任何人或公司。 http://www.szgdtrf.com Page 2 目录 封面.......................................................................................................1 目录.........................................................................................2 一、产品图片......................................................................................3 二、产品参数.......................................................................................3 三、S11数据.........................................................................................4 四、天线增益和效率...........................................................................4 五、苹果图...........................................................................................5 六、产品结构图..................................................................................6 七、环境可靠性实验报告..................................................................6 Shenzhen Guandetong Electronic Co., Ltd. Address: 3rd Floor, Building D, Maoyuan Industrial Park, Huanguan South Road, Guanhu Street, Longhua District, Shenzhen, China 保密要求 本公司已拥有专有技术所提供的资料，这些专有资料应严加保密，在未经深圳冠得通电子有限公司事先书面同意的时不允许 透露给任何人或公司。 http://www.szgdtrf.com Page 3 一、产品图片 二、产品参数 产品测试参数 产品名称(Name) FPC天线 产品型号(ModelType) 电性能指标 (ElectricalSpecifications) 频率范围(FrenquencyRange) 2400-2500MHz 5150-5800MHZ 极化方式 （ Polarization ） 垂直 输入阻抗(Impedance) 50Ω 辐射方向全向 驻波比 （ VSWR ） ≦2功率容量(Power) 50W 增益(Gain) 3dBi 带宽(Bandwidth 100/600MHz 机械指标(MechanicalSpecifications) 尺寸(Dimensions)53±2mm*23±1MM天线颜色(ChassisColor)黑色 连接器型号(Connector)IPEX(1代)引线长度(CableLength)150±5MM 天线材料(ChassisMaterial) FPC 工作温度 (WorkingTemperature) -40°C-+85°C 存放温度 (LimitTemperature) -40°C-+85°C 深 圳 市冠得 通 电 子有限 公 司 Shenzhen Guandetong Electronic Co., Ltd. Longhua District, Shenzhen, China Address: 3rd Floor, Building D, Maoyuan Industrial Park, Huanguan South Road, Guanhu Street, 保密要求 本公司已拥有专有技术所提供的资料，这些专有资料应严加保密，在未经深圳冠得通电子有限公司事先书面同意的时不允许 透露给任何人或公司。 http://www.szgdtrf.com Page 4 三、S11（VSWR、Returnloss、Smith）数据 四、增益和效率 深 圳 市冠得 通 电 子有限 公 司 Shenzhen Guandetong Electronic Co., Ltd. Longhua District, Shenzhen, China Address: 3rd Floor, Building D, Maoyuan Industrial Park, Huanguan South Road, Guanhu Street, 保密要求 本公司已拥有专有技术所提供的资料，这些专有资料应严加保密，在未经深圳冠得通电子有限公司事先书面同意的时不允许 透露给任何人或公司。 http://www.szgdtrf.com Page 5 五、苹果图 六 、 结 构 图 纸 2400MHZ 2450MHZ 2500MHZ 5800MHZA 深 圳 市冠得 通 电 子有限 公 司 Shenzhen Guandetong Electronic Co., Ltd. Longhua District, Shenzhen, China Address: 3rd Floor, Building D, Maoyuan Industrial Park, Huanguan South Road, Guanhu Street, 保密要求 本公司已拥有专有技术所提供的资料，这些专有资料应严加保密，在未经深圳冠得通电子有限公司事先书面同意的时不允许 透露给任何人或公司。 http://www.szgdtrf.com Page 6 七、环境性能测试 项目测试条件规格 储存环境 在没有指定的情况下测试温度、湿度、气压如下： 1.温度为-30°C～+80°C 2.相对湿度为45%-85% 3.气压为86kpa-106kpa 电气机械性能正常 高低温试验 在70°C与40°C之间进行5次循环，然后在正常条件下 1-2H，检查外观质量。 尺寸应满足规定并应 满足满足 于机械、电气性能 耐恒定湿热 试验 相对湿度95±3%，试验温度：40°C.持续2H作用后， 试品取出后5min之内测定电气性能，试品在正常条 件下1-2H，检查外观质量 尺寸应满足规定并应 满足满足 于机械、电气性能 振动试验 振频范围10-55HZ，位移幅值：0.35MM，加速度幅值： 50.0M/S，扫频循环次数：30次 电气机械性能正常 跌落试验1M高空按照互相垂直的轴方向自由跌落3次电气机械性能正常 深 圳 市冠得 通 电 子有限 公 司 Shenzhen Guandetong Electronic Co., Ltd. Longhua District, Shenzhen, China Address: 3rd Floor, Building D, Maoyuan Industrial Park, Huanguan South Road, Guanhu Street,

Page 1 of 26 Report No.: 8232EU010604W-AD ANNEX D TEST DATA For Project No.: 8232EU010604W Client: Shenzhen Qianhai Runway Technology Co., LTD Product Description: Smart Pet Feeder Model No.: F15-C FCC ID: 2AU2C-F15-C Technology: Bluetooth BLE Test Engineer: Test Date: 2024-08-22 Page 2 of 26 Report No.: 8232EU010604W-AD Test Summary Item Result Duty Cycle Pass Bandwidth Pass Maximum Conducted Output Power Pass Maximum Power Spectral Density Pass Unwanted Emissions In Non-restricted Frequency Bands Pass Page 3 of 26 Report No.: 8232EU010604W-AD 1. Duty Cycle 1.1 Test Result 1.1.1 Ant1 Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) 1M SISO 2402 2.094 3.124 67.03 1.74 16.78 2440 2.094 3.124 67.03 1.74 16.78 2480 2.095 3.126 67.02 1.74 16.77 Page 4 of 26 Report No.: 8232EU010604W-AD 1.2 Test Graph 1.2.1 Ant1 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 5 of 26 Report No.: 8232EU010604W-AD 1M_HCH_2480MHz_Ant1_NTNV Page 6 of 26 Report No.: 8232EU010604W-AD 2. Bandwidth 2.1 Test Result 2.1.1 OBW Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result Limit 1M SISO 2402 1 1.015 / Pass 2440 1 1.014 / Pass 2480 1 1.014 / Pass 2.1.2 6dB BW Mode TX Type Frequency (MHz) ANT 6dB Bandwidth (MHz) Verdict Result Limit 1M SISO 2402 1 0.647 >=0.5 Pass 2440 1 0.643 >=0.5 Pass 2480 1 0.642 >=0.5 Pass Page 7 of 26 Report No.: 8232EU010604W-AD 2.2 Test Graph 2.2.1 OBW 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 8 of 26 Report No.: 8232EU010604W-AD 1M_HCH_2480MHz_Ant1_NTNV Page 9 of 26 Report No.: 8232EU010604W-AD 2.2.2 6dB BW 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 10 of 26 Report No.: 8232EU010604W-AD 1M_HCH_2480MHz_Ant1_NTNV Page 11 of 26 Report No.: 8232EU010604W-AD 3. Maximum Conducted Output Power 3.1 Test Result 3.1.1 Power Mode TX Type Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Verdict ANT1 Limit 1M SISO 2402 -1.42 <=30 Pass 2440 -1.54 <=30 Pass 2480 -2.19 <=30 Pass Page 12 of 26 Report No.: 8232EU010604W-AD 3.2 Test Graph 3.2.1 Power 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 13 of 26 Report No.: 8232EU010604W-AD 1M_HCH_2480MHz_Ant1_NTNV Page 14 of 26 Report No.: 8232EU010604W-AD 4. Maximum Power Spectral Density 4.1 Test Result 4.1.1 PSD Mode TX Type Frequency (MHz) Maximum PSD (dBm/3kHz) Verdict ANT1 Limit 1M SISO 2402 -16.67 <=8 Pass 2440 -16.45 <=8 Pass 2480 -17.55 <=8 Pass Page 15 of 26 Report No.: 8232EU010604W-AD 4.2 Test Graph 4.2.1 PSD 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 16 of 26 Report No.: 8232EU010604W-AD 1M_HCH_2480MHz_Ant1_NTNV Page 17 of 26 Report No.: 8232EU010604W-AD 5. Unwanted Emissions In Non-restricted Frequency Bands 5.1 Test Result 5.1.1 Ref Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) 1M SISO 2402 1 -1.75 2440 1 -1.97 2480 1 -2.46 Note1: Refer to FCC Part 15.247 (d) and ANSI C63.10-2020, the channel contains the maximum PSD level was used to establish the reference level. 5.1.2 CSE Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) Limit (dBm) Verdict 1M SISO 2402 1 -1.75 -21.75 Pass 2440 1 -1.97 -21.97 Pass 2480 1 -2.46 -22.46 Pass Note1: Refer to FCC Part 15.247 (d) and ANSI C63.10-2020, the channel contains the maximum PSD level was used to establish the reference level. Page 18 of 26 Report No.: 8232EU010604W-AD 5.2 Test Graph 5.2.1 Ref 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 19 of 26 Report No.: 8232EU010604W-AD 1M_HCH_2480MHz_Ant1_NTNV Page 20 of 26 Report No.: 8232EU010604W-AD 5.2.2 CSE 1M_LCH_2402MHz_Ant1_NTNV 1M_LCH_2402MHz_Ant1_NTNV Page 21 of 26 Report No.: 8232EU010604W-AD 1M_LCH_2402MHz_Ant1_NTNV 1M_LCH_2402MHz_Ant1_NTNV Page 22 of 26 Report No.: 8232EU010604W-AD 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 23 of 26 Report No.: 8232EU010604W-AD 1M_MCH_2440MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 24 of 26 Report No.: 8232EU010604W-AD 1M_MCH_2440MHz_Ant1_NTNV 1M_HCH_2480MHz_Ant1_NTNV Page 25 of 26 Report No.: 8232EU010604W-AD 1M_HCH_2480MHz_Ant1_NTNV 1M_HCH_2480MHz_Ant1_NTNV Page 26 of 26 Report No.: 8232EU010604W-AD 1M_HCH_2480MHz_Ant1_NTNV 1M_HCH_2480MHz_Ant1_NTNV --------- End of Report -------

TEST REPORT Report No.: 8232EU010604W2 Applicant: Shenzhen Qianhai Runway Technology Co., LTD Address: Room 201, Block A, No.1, Qianwan Road 1, Qianhai Shenzhen Hong Kong Cooperation Zone, Shenzhen, China Product Name: Smart Pet Feeder Model No.: F15-C Trademark: N/A FCC ID: 2AU2C-F15-C Test Standard(s): 47 CFR Part 15 Subpart C Date of Receipt: Aug. 06, 2024 Test Date: Aug. 06, 2024 – Aug. 22, 2024 Date of Issue: Aug. 29, 2024 ISSUED BY: SHENZHEN EU TESTING LABORATORY LIMITED Prepared by: Reviewed and Approved by: ____________________ _____________________ Mikey Zhu/ Engineer Sally Zhang/ Manager Page 2 of 41 Report No.: 8232EU010604W2 TRF No.: FCC Part 15 Subpart C_WiFi (A02) Revision Record Report Version Issued Date Description Status V0 Aug. 29, 2024 Original Valid Page 3 of 41 Report No.: 8232EU010604W2 TRF No.: FCC Part 15 Subpart C_WiFi (A02) Table of Contents 1 COVER PAGE .................................................................................................................................... 1 2 GENERAL INFORMATION .......................................................................................................................5 2.1 APPLICANT INFORMATION ...................................................................................................................5 2.2 MANUFACTURER INFORMATION ...........................................................................................................5 2.3 FACTORY INFORMATION ......................................................................................................................5 2.4 GENERAL DESCRIPTION OF E.U.T. ......................................................................................................5 2.5 TECHNICAL INFORMATION OF E.U.T. ...................................................................................................6 3 TEST SUMMARY .......................................................................................................................................8 3.1 TEST STANDARD ................................................................................................................................8 3.2 TEST VERDICT ....................................................................................................................................8 3.3 TEST LABORATORY ............................................................................................................................8 4 TEST CONFIGURATION ...........................................................................................................................9 4.1 TEST ENVIRONMENT ...........................................................................................................................9 4.2 TEST EQUIPMENT ...............................................................................................................................9 4.3 DESCRIPTION OF SUPPORT UNIT ...................................................................................................... 10 4.4 TEST MODE..................................................................................................................................... 10 4.5 DESCRIPTION OF CALCULATION ....................................................................................................... 10 4.6 MEASUREMENT UNCERTAINTY ......................................................................................................... 11 4.7 DEVIATION FROM STANDARDS ......................................................................................................... 11 4.8 ABNORMALITIES FROM STANDARD CONDITION ................................................................................. 11 5 TEST ITEMS ........................................................................................................................................... 12 5.1 ANTENNA REQUIREMENT .................................................................................................................. 12 5.1.1 Test Requirement ........................................................................................................... 12 5.1.2 Antenna Anti-Replacement Construction ........................................................................ 12 5.1.3 Antenna Gain .................................................................................................................. 12 5.2 CONDUCTED EMISSION AT AC POWER LINE ..................................................................................... 13 5.2.1 Test Requirement ........................................................................................................... 13 5.2.2 Test Setup Diagram ........................................................................................................ 13 5.2.3 Test Procedure ............................................................................................................... 13 5.2.4 Test Data......................................................................................................................... 13 5.3 DTS BANDWIDTH ............................................................................................................................ 16 5.3.1 Test Requirement ........................................................................................................... 16 5.3.2 Test Setup Diagram ........................................................................................................ 16 5.3.3 Test Procedure ............................................................................................................... 16 5.3.4 Test Data......................................................................................................................... 16 5.4 MAXIMUM CONDUCTED OUTPUT POWER .......................................................................................... 17 5.4.1 Test Requirement .............................................................…

Text truncated - open the document above for the full version.

TEST REPORT Report No.: 8232EU010604W1 Applicant: Shenzhen Qianhai Runway Technology Co., LTD Address: Room 201, Block A, No.1, Qianwan Road 1, Qianhai Shenzhen Hong Kong Cooperation Zone, Shenzhen, China Product Name: Smart Pet Feeder Model No.: F15-C Trademark: N/A FCC ID: 2AU2C-F15-C Test Standard(s): 47 CFR Part 15 Subpart C Date of Receipt: Aug. 06, 2024 Test Date: Aug. 06, 2024 – Aug. 22, 2024 Date of Issue: Aug. 29, 2024 ISSUED BY: SHENZHEN EU TESTING LABORATORY LIMITED Prepared by: Reviewed and Approved by: ____________________ _____________________ Mikey Zhu/ Engineer Sally Zhang/ Manager Page 2 of 33 Report No.: 8232EU010604W1 TRF No.: FCC Part 15 Subpart C_BLE (A02) Revision Record Report Version Issued Date Description Status V0 Aug. 29, 2024 Original Valid Page 3 of 33 Report No.: 8232EU010604W1 TRF No.: FCC Part 15 Subpart C_BLE (A02) Table of Contents 1 COVER PAGE .................................................................................................................................... 1 2 GENERAL INFORMATION .......................................................................................................................5 2.1 APPLICANT INFORMATION ...................................................................................................................5 2.2 MANUFACTURER INFORMATION ...........................................................................................................5 2.3 FACTORY INFORMATION ......................................................................................................................5 2.4 GENERAL DESCRIPTION OF E.U.T. ......................................................................................................5 2.5 TECHNICAL INFORMATION OF E.U.T. ...................................................................................................6 3 TEST SUMMARY .......................................................................................................................................7 3.1 TEST STANDARD ................................................................................................................................7 3.2 TEST VERDICT ....................................................................................................................................7 3.3 TEST LABORATORY ............................................................................................................................7 4 TEST CONFIGURATION ...........................................................................................................................8 4.1 TEST ENVIRONMENT ...........................................................................................................................8 4.2 TEST EQUIPMENT ...............................................................................................................................8 4.3 DESCRIPTION OF SUPPORT UNIT .........................................................................................................9 4.4 TEST MODE........................................................................................................................................9 4.5 DESCRIPTION OF CALCULATION ..........................................................................................................9 4.6 MEASUREMENT UNCERTAINTY ......................................................................................................... 10 4.7 DEVIATION FROM STANDARDS ......................................................................................................... 10 4.8 ABNORMALITIES FROM STANDARD CONDITION ................................................................................. 10 5 TEST ITEMS ........................................................................................................................................... 11 5.1 ANTENNA REQUIREMENT .................................................................................................................. 11 5.1.1 Test Requirement ........................................................................................................... 11 5.1.2 Antenna Anti-Replacement Construction ........................................................................ 11 5.1.3 Antenna Gain .................................................................................................................. 11 5.2 CONDUCTED EMISSION AT AC POWER LINE ..................................................................................... 12 5.2.1 Test Requirement ........................................................................................................... 12 5.2.2 Test Setup Diagram ........................................................................................................ 12 5.2.3 Test Procedure ...........................................................…

Text truncated - open the document above for the full version.