2AU2C-F15-WSmart Pet Feeder

Shenzhen Qianhai Runway Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 8/26/2024 U.S. Agent Designation [Shenzhen Qianhai Runway Technology Co., Ltd.] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: [2AU2C-F15-W]): Name and company of U.S. agent: Stone Trading Limited Physical U.S. address of agent: 6547 N Academy Blvd #2266,Colorado Springs,CO 80918,United States FRN of U.S. agent: 0033401936 Email address of U.S. agent: [email protected] [Stone Trading Limited] acknowledges their obligation to accept service of process on behalf of [Shenzhen Qianhai Runway Technology Co., Ltd.]. [Shenzhen Qianhai Runway Technology Co., Ltd.] with the FRN [0028954667] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature [Name] Ma Juan [Title] Manager [Company] Shenzhen Qianhai Runway Technology Co., Ltd. [Name of U.S. agent] Dongmei Fang [Title of U.S. agent] Manager [Company of U.S. agent] Stone Trading Limited 48_[mo del] US_Agent_2.911(d)(7) - U, V04

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2AU2C-F15-W F15-W We, applicant Company Name: Shenzhen Qianhai Runway Technology Co., LTD Address: Room 201, Block A, No.1, Qianwan Road 1, Qianhai Shenzhen Hong Kong Cooperation Zone, Shenzhen, China Phone: +86-13603061340 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024-08-26 Signature Date Printed Name of Signee / Title: Juan Ma / Manager Company: Shenzhen Qianhai Runway Technology Co., LTD Address: Room 201, Block A, No.1, Qianwan Road 1, Qianhai Shenzhen Hong Kong Cooperation Zone, Shenzhen, China Phone: +86-13603061340 Email: [email protected]

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2AU2C-F15-W F15-W We, applicant Company Name: Shenzhen Qianhai Runway Technology Co., LTD Address: Room 201, Block A, No.1, Qianwan Road 1, Qianhai Shenzhen Hong Kong Cooperation Zone, Shenzhen, China Phone: +86-13603061340 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024-08-26 Signature Date Printed Name of Signee / Title: Juan Ma / Manager Company: Shenzhen Qianhai Runway Technology Co., LTD Address: Room 201, Block A, No.1, Qianwan Road 1, Qianhai Shenzhen Hong Kong Cooperation Zone, Shenzhen, China Phone: +86-13603061340 Email: [email protected]

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2AU2C-F15-W F15-W For the products listed above, we request permanent confidentiality for all applicable exhibits as there are: • the Operational Description • the Block Diagram • the Schematics • the Part List • the Tune up Information The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024-08-26 Signature Date Printed Name of Signee / Title: Juan Ma / Manager Company: Shenzhen Qianhai Runway Technology Co., LTD Address: Room 201, Block A, No.1, Qianwan Road 1, Qianhai Shenzhen Hong Kong Cooperation Zone, Shenzhen, China Phone: +86-13603061340 Email: [email protected]

Short Term Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we request short term confidentiality prior to marketing the device for the documentation of the following products: FCC ID Model name 2AU2C-F15-W F15-W For the products listed above, we request short term confidentiality for all applicable exhibits as there are: • External photos • Internal photos • Test setup photos • User manual The above listed exhibits contain business sensitive information which we wish to keep confidential until the actual marketing of our device, that is planned for: Short term confidentiality release date: < 180 days after issue of grant > If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024-08-26 Signature Date Printed Name of Signee / Title: Juan Ma / Manager Company: Shenzhen Qianhai Runway Technology Co., LTD Address: Room 201, Block A, No.1, Qianwan Road 1, Qianhai Shenzhen Hong Kong Cooperation Zone, Shenzhen, China Phone: +86-13603061340 Email: [email protected]

Page 1 of 1 Rev.2.0 Shenzhen Qianhai Runway Technology Co., LTD WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2AU2C-F15-W Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels can’t be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note: 1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo- location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following: Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Juan Ma / Manager Signature: Phone: +86-13603061340 Email: [email protected] Date: 2024-08-26

Bottom of EUT Label Label Location Smart Pet Feeder Model No.: F15-W FCC ID: 2AU2C-F15-W This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b) FCC ID: 2AU2C-F15-W EUT Specification EUT Smart Pet Feeder Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.24GHz WLAN: 5.745GHz ~ 5.825GHz Others: 2.402GHz~2.480GHz BLE Device category Portable (<20cm separation) Mobile (>20cm separation) Others ___ Exposure classification Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure (S=1mW/cm2) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power 2.4G WiFi: 15.91dBm (0.0390W) BLE: 1.94dBm (0.0016W) Antenna gain (Max) 2.54 dBi Evaluation applied MPE Evaluation SAR Evaluation Limits for Maximum Permissible Exposure(MPE) Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density(mW/cm 2 ) Average Time (A) Limits for Occupational/Control Exposures 300-1500 -- -- F/300 6 1500-100000 -- -- 5 6 (B) Limits for General Population/Uncontrol Exposures 300-1500 -- -- F/1500 6 1500-100000 -- -- 1 30 Friis transmission formula: Pd=(Pout*G)\(4*pi*R2) Where Pd= Power density in mW/cm 2 Pout=output power to antenna in Mw G= gain of antenna in linear scale Pi=3.1416 R= distance between observation point and center of the radiator in cm Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Measurement Result 2.4GHz WiFi worst case: Operating Mode Channel Frequency Measured Power Target Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm 2 ) (MHz) (dBm) (dBm) (dBm) (dBm) (dBi) (mW/ cm 2 ) 802.11g 2462 15.91 16 ±1 17 2.54 0.0899 1 BLE worst case: Operating Mode Channel Frequency Measured Power Target Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm 2 ) (MHz) (dBm) (dBm) (dBm) (dBm) (dBi) (mW/ cm 2 ) BLE 2440 1.94 2 ±1 3 2.54 0.0036 1 Note: 2.4G WiFi and BLE do not support simultaneous transmission.

AntennaSpecification Manufacture：TUYA ProductName：WBR3Antenna AntennaType：PCB TestDate：2021.05.20 Testedby：LongWang Approvedby：Licco Content 1.GeneralDescription.................................................................................1 2.TestConfigurations...................................................................................2 2.1TestEnvironment............................................................................2 2.2TestEquipment...............................................................................2 2.3TestPrinciple...................................................................................2 3.TestResults..............................................................................................3 3.1GainandEfficiency..........................................................................3 3.2RadiationPattern............................................................................4 4.AntennaDimensions................................................................................6 5.EUTPhoto................................................................................................6 6.TestSetupPhoto......................................................................................7 1 1.GeneralDescription ManufacturerHangzhouTuyaInformationTechnologyCo.,Ltd Address Room701,Building3,MoreCenter,No.87GuDunRoad, Hangzhou,Zhejiang,China TestLocation Room106,Building3,LetongSciencePark,No.500, QiuyiRoad,BinjiangDistrict,Hangzhou ProductNameWBR3Antenna Productmodel WBR3 AntennaType PCBAntenna TestItems Gain;Efficiency;RadiationPattern TestFrequency 2400-2500MHz TestStandard ANSI/IEEEStd149-1979 2 2.TestConfigurations 2.1TestEnvironment Temperature(°C)25 Humidity(%RH)60 AtmosphericPressure(kPa)100.5 2.2TestEquipment TestSystemTEM24Multi-probeMicrowaveChamber TestInstrumentAgilentE5071B 2.3TestPrinciple 3 3.TestResults 3.1GainandEfficiency Frequency(MHz)PeakGain(dBi)Efficiency(%) 2400 1.6252.29 2410 1.7152.17 2420 1.9353.14 2430 1.9854.16 2440 2.0057.62 2450 2.1759.64 2460 2.4561.55 2470 2.3860.64 2480 2.5462.86 2490 2.3059.85 2500 2.4960.41 4 3.2RadiationPattern Phi02D Phi902D 5 Theta902D 2480MHz3D 6 4.AntennaDimensions 5.EUTPhoto 7 6.TestSetupPhoto

Page 1 of 30 Report No.: 8232EU010603W-AD ANNEX D TEST DATA For Project No.: 8232EU010603W Client: Shenzhen Qianhai Runway Technology Co., LTD Product Description: Smart Pet Feeder Model No.: F15-W FCC ID: 2AU2C-F15-W Technology: Bluetooth BLE Test Engineer: Test Date: 2024-08-19 Page 2 of 30 Report No.: 8232EU010603W-AD Test Summary Item Result Duty Cycle Pass Bandwidth Pass Maximum Conducted Output Power Pass Maximum Power Spectral Density Pass Unwanted Emissions In Non-restricted Frequency Bands Pass Unwanted Emissions In Restricted Frequency Bands Pass Page 3 of 30 Report No.: 8232EU010603W-AD 1. Duty Cycle 1.1 Test Result 1.1.1 Ant1 Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) 1M SISO 2402 0.403 0.625 64.48 1.91 0.03 2440 0.403 0.625 64.48 1.91 0.03 2480 0.403 0.625 64.48 1.91 0.00 Page 4 of 30 Report No.: 8232EU010603W-AD 1.2 Test Graph 1.2.1 Ant1 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 5 of 30 Report No.: 8232EU010603W-AD 1M_HCH_2480MHz_Ant1_NTNV Page 6 of 30 Report No.: 8232EU010603W-AD 2. Bandwidth 2.1 Test Result 2.1.1 OBW Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result Limit 1M SISO 2402 1 1.028 / Pass 2440 1 1.030 / Pass 2480 1 1.038 / Pass 2.1.2 6dB BW Mode TX Type Frequency (MHz) ANT 6dB Bandwidth (MHz) Verdict Result Limit 1M SISO 2402 1 0.662 >=0.5 Pass 2440 1 0.663 >=0.5 Pass 2480 1 0.651 >=0.5 Pass Page 7 of 30 Report No.: 8232EU010603W-AD 2.2 Test Graph 2.2.1 OBW 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 8 of 30 Report No.: 8232EU010603W-AD 1M_HCH_2480MHz_Ant1_NTNV Page 9 of 30 Report No.: 8232EU010603W-AD 2.2.2 6dB BW 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 10 of 30 Report No.: 8232EU010603W-AD 1M_HCH_2480MHz_Ant1_NTNV Page 11 of 30 Report No.: 8232EU010603W-AD 3. Maximum Conducted Output Power 3.1 Test Result 3.1.1 Power Mode TX Type Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Verdict ANT1 Limit 1M SISO 2402 1.03 <=30 Pass 2440 1.94 <=30 Pass 2480 1.77 <=30 Pass Page 12 of 30 Report No.: 8232EU010603W-AD 3.2 Test Graph 3.2.1 Power 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 13 of 30 Report No.: 8232EU010603W-AD 1M_HCH_2480MHz_Ant1_NTNV Page 14 of 30 Report No.: 8232EU010603W-AD 4. Maximum Power Spectral Density 4.1 Test Result 4.1.1 PSD Mode TX Type Frequency (MHz) Maximum PSD (dBm/3kHz) Verdict ANT1 Limit 1M SISO 2402 -14.19 <=8 Pass 2440 -13.16 <=8 Pass 2480 -14.04 <=8 Pass Page 15 of 30 Report No.: 8232EU010603W-AD 4.2 Test Graph 4.2.1 PSD 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 16 of 30 Report No.: 8232EU010603W-AD 1M_HCH_2480MHz_Ant1_NTNV Page 17 of 30 Report No.: 8232EU010603W-AD 5. Unwanted Emissions In Non-restricted Frequency Bands 5.1 Test Result 5.1.1 Ref Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) 1M SISO 2402 1 0.76 2440 1 1.67 2480 1 1.48 Note1: Refer to FCC Part 15.247 (d) and ANSI C63.10-2020, the channel contains the maximum PSD level was used to establish the reference level. 5.1.2 CSE Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) Limit (dBm) Verdict 1M SISO 2402 1 0.76 -19.24 Pass 2440 1 1.67 -18.33 Pass 2480 1 1.48 -18.52 Pass Note1: Refer to FCC Part 15.247 (d) and ANSI C63.10-2020, the channel contains the maximum PSD level was used to establish the reference level. Page 18 of 30 Report No.: 8232EU010603W-AD 5.2 Test Graph 5.2.1 Ref 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 19 of 30 Report No.: 8232EU010603W-AD 1M_HCH_2480MHz_Ant1_NTNV Page 20 of 30 Report No.: 8232EU010603W-AD 5.2.2 CSE 1M_LCH_2402MHz_Ant1_NTNV 1M_LCH_2402MHz_Ant1_NTNV Page 21 of 30 Report No.: 8232EU010603W-AD 1M_LCH_2402MHz_Ant1_NTNV 1M_LCH_2402MHz_Ant1_NTNV Page 22 of 30 Report No.: 8232EU010603W-AD 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 23 of 30 Report No.: 8232EU010603W-AD 1M_MCH_2440MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 24 of 30 Report No.: 8232EU010603W-AD 1M_MCH_2440MHz_Ant1_NTNV 1M_HCH_2480MHz_Ant1_NTNV Page 25 of 30 Report No.: 8232EU010603W-AD 1M_HCH_2480MHz_Ant1_NTNV 1M_HCH_2480MHz_Ant1_NTNV Page 26 of 30 Report No.: 8232EU010603W-AD 1M_HCH_2480MHz_Ant1_NTNV 1M_HCH_2480MHz_Ant1_NTNV Page 27 of 30 Report No.: 8232EU010603W-AD 6. Unwanted Emissions In Restricted Frequency Bands 6.1 Test Result 6.1.1 RSE Mode TX Type Frequency (MHz) ANT Level of Unwanted Emissions (dBm) Verdict Result Limit 1M SISO 2402 1 Refer To Test Graph Pass 2440 1 Refer To Test Graph Pass 2480 1 Refer To Test Graph Pass Page 28 of 30 Report No.: 8232EU010603W-AD 6.2 Test Graph 6.2.1 RSE 1M_LCH_2402MHz_Ant1_NTNV 1M_LCH_2402MHz_Ant1_NTNV Page 29 of 30 Report No.: 8232EU010603W-AD 1M_MCH_2440MHz_Ant1_NTNV 1M_HCH_2480MHz_Ant1_NTNV Page 30 of 30 Report No.: 8232EU010603W-AD 1M_HCH_2480MHz_Ant1_NTNV --------- End of Report -------

Page 1 of 62 Report No.: 8232EU010603W-AD ANNEX D TEST DATA For Project No.: 8232EU010603W Client: Shenzhen Qianhai Runway Technology Co., LTD Product Description: Smart Pet Feeder Model No.: F15-W FCC ID: 2AU2C-F15-W Technology: WiFi 2.4G Test Engineer: Test Date: 2024-08-20 Page 2 of 62 Report No.: 8232EU010603W-AD Test Summary Item Result Duty Cycle Pass Bandwidth Pass Maximum Conducted Output Power Pass Maximum Power Spectral Density Pass Unwanted Emissions In Non-restricted Frequency Bands Pass Page 3 of 62 Report No.: 8232EU010603W-AD 1. Duty Cycle 1.1 Test Result 1.1.1 Ant1 Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) 802.11b SISO 2412 12.417 12.547 98.96 0.05 0.03 2437 12.420 12.550 98.96 0.05 0.03 2462 12.416 12.546 98.96 0.05 0.03 802.11g SISO 2412 2.065 2.194 94.12 0.26 0.04 2437 2.065 2.194 94.12 0.26 0.03 2462 2.065 2.194 94.12 0.26 0.04 802.11n (HT20) SISO 2412 1.920 2.050 93.66 0.28 0.07 2437 1.921 2.050 93.71 0.28 0.00 2462 1.921 2.050 93.71 0.28 0.04 Page 4 of 62 Report No.: 8232EU010603W-AD 1.2 Test Graph 1.2.1 Ant1 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Page 5 of 62 Report No.: 8232EU010603W-AD 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Page 6 of 62 Report No.: 8232EU010603W-AD 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Page 7 of 62 Report No.: 8232EU010603W-AD 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Page 8 of 62 Report No.: 8232EU010603W-AD 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV Page 9 of 62 Report No.: 8232EU010603W-AD 2. Bandwidth 2.1 Test Result 2.1.1 OBW Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result Limit 802.11b SISO 2412 1 14.039 / Pass 2437 1 14.056 / Pass 2462 1 14.067 / Pass 802.11g SISO 2412 1 17.967 / Pass 2437 1 18.073 / Pass 2462 1 17.956 / Pass 802.11n (HT20) SISO 2412 1 18.882 / Pass 2437 1 18.866 / Pass 2462 1 18.907 / Pass 2.1.2 6dB BW Mode TX Type Frequency (MHz) ANT 6dB Bandwidth (MHz) Verdict Result Limit 802.11b SISO 2412 1 9.102 >=0.5 Pass 2437 1 9.102 >=0.5 Pass 2462 1 9.092 >=0.5 Pass 802.11g SISO 2412 1 16.354 >=0.5 Pass 2437 1 16.343 >=0.5 Pass 2462 1 16.363 >=0.5 Pass 802.11n (HT20) SISO 2412 1 17.531 >=0.5 Pass 2437 1 17.573 >=0.5 Pass 2462 1 17.571 >=0.5 Pass Page 10 of 62 Report No.: 8232EU010603W-AD 2.2 Test Graph 2.2.1 OBW 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Page 11 of 62 Report No.: 8232EU010603W-AD 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Page 12 of 62 Report No.: 8232EU010603W-AD 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Page 13 of 62 Report No.: 8232EU010603W-AD 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Page 14 of 62 Report No.: 8232EU010603W-AD 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV Page 15 of 62 Report No.: 8232EU010603W-AD 2.2.2 6dB BW 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Page 16 of 62 Report No.: 8232EU010603W-AD 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Page 17 of 62 Report No.: 8232EU010603W-AD 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Page 18 of 62 Report No.: 8232EU010603W-AD 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Page 19 of 62 Report No.: 8232EU010603W-AD 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV Page 20 of 62 Report No.: 8232EU010603W-AD 3. Maximum Conducted Output Power 3.1 Test Result 3.1.1 Power Mode TX Type Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Verdict ANT1 Limit 802.11b SISO 2412 13.79 <=30 Pass 2437 13.92 <=30 Pass 2462 14.07 <=30 Pass 802.11g SISO 2412 15.57 <=30 Pass 2437 15.71 <=30 Pass 2462 15.90 <=30 Pass 802.11n (HT20) SISO 2412 15.61 <=30 Pass 2437 15.71 <=30 Pass 2462 15.88 <=30 Pass Page 21 of 62 Report No.: 8232EU010603W-AD 4. Maximum Power Spectral Density 4.1 Test Result 4.1.1 PSD Mode TX Type Frequency (MHz) Maximum PSD (dBm/3kHz) Verdict ANT1 Limit 802.11b SISO 2412 -12.25 <=8 Pass 2437 -11.35 <=8 Pass 2462 -12.24 <=8 Pass 802.11g SISO 2412 -18.16 <=8 Pass 2437 -18.02 <=8 Pass 2462 -17.17 <=8 Pass 802.11n (HT20) SISO 2412 -18.17 <=8 Pass 2437 -18.06 <=8 Pass 2462 -17.32 <=8 Pass Page 22 of 62 Report No.: 8232EU010603W-AD 4.2 Test Graph 4.2.1 PSD 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Page 23 of 62 Report No.: 8232EU010603W-AD 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Page 24 of 62 Report No.: 8232EU010603W-AD 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Page 25 of 62 Report No.: 8232EU010603W-AD 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Page 26 of 62 Report No.: 8232EU010603W-AD 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV Page 27 of 62 Report No.: 8232EU010603W-AD 5. Unwanted Emissions In Non-restricted Frequency Bands 5.1 Test Result 5.1.1 Ref Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) 802.11b SISO 2412 1 2.80 2437 1 2.86 2462 1 3.08 802.11g SISO 2412 1 -3.31 2437 1 -3.38 2462 1 -2.78 802.11n (HT20) SISO 2412 1 -3.31 2437 1 -3.13 2462 1 -2.76 Note1: Refer to FCC Part 15.247 (d) and ANSI C63.10-2020, the channel contains the maximum PSD level was used to establish the reference level. 5.1.2 CSE Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) Limit (dBm) Verdict 802.11b SISO 2412 1 2.80 -17.20 Pass 2437 1 2.86 -17.14 Pass 2462 1 3.08 -16.92 Pass 802.11g SISO 2412 1 -3.31 -23.31 Pass 2437 1 -3.38 -23.38 Pass 2462 1 -2.78 -22.78 Pass 802.11n (HT20) SISO 2412 1 -3.31 -23.31 Pass 2437 1 -3.13 -23.13 Pass 2462 1 -2.76 -22.76 Pass Note1: Refer to FCC Part 15.247 (d) and ANSI C63.10-2020, the channel contains the maximum PSD level was used to establish the reference level. Page 28 …

Text truncated - open the document above for the full version.

TEST REPORT Report No.: 8232EU010603W2 Applicant: Shenzhen Qianhai Runway Technology Co., LTD Address: Room 201, Block A, No.1, Qianwan Road 1, Qianhai Shenzhen Hong Kong Cooperation Zone, Shenzhen, China Product Name: Smart Pet Feeder Model No.: F15-W Trademark: N/A FCC ID: 2AU2C-F15-W Test Standard(s): 47 CFR Part 15 Subpart C Date of Receipt: Aug. 06, 2024 Test Date: Aug. 06, 2024 – Aug. 22, 2024 Date of Issue: Aug. 26, 2024 ISSUED BY: SHENZHEN EU TESTING LABORATORY LIMITED Prepared by: Reviewed and Approved by: ____________________ _____________________ Mikey Zhu/ Engineer Sally Zhang/ Manager Page 2 of 41 Report No.: 8232EU010603W2 TRF No.: FCC Part 15 Subpart C_WiFi (A02) Revision Record Report Version Issued Date Description Status V0 Aug. 26, 2024 Original Valid Page 3 of 41 Report No.: 8232EU010603W2 TRF No.: FCC Part 15 Subpart C_WiFi (A02) Table of Contents 1 COVER PAGE .................................................................................................................................... 1 2 GENERAL INFORMATION .......................................................................................................................5 2.1 APPLICANT INFORMATION ...................................................................................................................5 2.2 MANUFACTURER INFORMATION ...........................................................................................................5 2.3 FACTORY INFORMATION ......................................................................................................................5 2.4 GENERAL DESCRIPTION OF E.U.T. ......................................................................................................5 2.5 TECHNICAL INFORMATION OF E.U.T. ...................................................................................................6 3 TEST SUMMARY .......................................................................................................................................8 3.1 TEST STANDARD ................................................................................................................................8 3.2 TEST VERDICT ....................................................................................................................................8 3.3 TEST LABORATORY ............................................................................................................................8 4 TEST CONFIGURATION ...........................................................................................................................9 4.1 TEST ENVIRONMENT ...........................................................................................................................9 4.2 TEST EQUIPMENT ...............................................................................................................................9 4.3 DESCRIPTION OF SUPPORT UNIT ...................................................................................................... 10 4.4 TEST MODE..................................................................................................................................... 10 4.5 DESCRIPTION OF CALCULATION ....................................................................................................... 10 4.6 MEASUREMENT UNCERTAINTY ......................................................................................................... 11 4.7 DEVIATION FROM STANDARDS ......................................................................................................... 11 4.8 ABNORMALITIES FROM STANDARD CONDITION ................................................................................. 11 5 TEST ITEMS ........................................................................................................................................... 12 5.1 ANTENNA REQUIREMENT .................................................................................................................. 12 5.1.1 Test Requirement ........................................................................................................... 12 5.1.2 Antenna Anti-Replacement Construction ........................................................................ 12 5.1.3 Antenna Gain .................................................................................................................. 12 5.2 CONDUCTED EMISSION AT AC POWER LINE ..................................................................................... 13 5.2.1 Test Requirement ........................................................................................................... 13 5.2.2 Test Setup Diagram ........................................................................................................ 13 5.2.3 Test Procedure ............................................................................................................... 13 5.2.4 Test Data......................................................................................................................... 13 5.3 DTS BANDWIDTH ............................................................................................................................ 16 5.3.1 Test Requirement ........................................................................................................... 16 5.3.2 Test Setup Diagram ........................................................................................................ 16 5.3.3 Test Procedure ............................................................................................................... 16 5.3.4 Test Data.......…

Text truncated - open the document above for the full version.