2AU6TELITEWCS-01Wireless Charger

Wireless Charging Stand Wireless Charger Theragun Elite Wireless Charging Stand Theragun Elite not included with the Wireless Charging Stand Charging your Theragun Elite 1. Plug the power adapter into the Wireless Charging Stand’s charging port. 2. Turn off your Theragun Elite. 3. Place your Theragun Elite in the cradle of the Wireless Charging Stand and push forward until fully inserted. 4. The LED light of the wireless charging stand will light up when properly connected. The Theragun Elite is fully charged when the battery icon on the device’s OLED screen is full. The Theragun Elite can remain in the Wireless Charging Stand even when the device is fully charged. LED Born in Los Angeles, CA. Change the way you move.

WARNINGS IC 1. This device complies with Industry Canada RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. 1.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et. (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. 2. Les changements ou modifications non expressément approuvés par la partie responsable de la conformité peuvent annuler le droit de l'utilisateur à utiliser l'équipement. Cet appareil est conforme aux limites d'exposition de rayonnement RF ISEDC établiespour un environnement non contrôlé.

Theragun, Inc. 2803 Colorado Avenue Santa Monica 90404 USA COMPANY LETTERHEAD Date (19/05/2020) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Dear Sir or Madam, We, (Theragun, Inc., 2803 Colorado Avenue, Santa Monica, California, 90404, United States), hereby authorize (Myron Yu [TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch, Building 12 & 13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen 518052, P.R. China and +86 33323623) to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Type of equipment: Wireless Charger Model name: Elite Wireless Charging Stand FCC ID: 2AU6TELITEWCS-01 This authorization expires on 19/11/2020. Sincerely, Company Officer: Tony Zhong Telephone Number: +86-15994710928 Email: [email protected]

Theragun, Inc. Date (09/04/2020) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Confidentiality Request FCC ID: 2AU6TELITEWCS-01 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, (Theragun, Inc.) hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation] (Theragun, Inc.) also hereby requests short-term confidential treatment of information accompanying this application as outlined below for a period of 180 days: Internal Photos External Photos User Manual Test Set-up Photographs The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: Tony Zhong Telephone Number: +86-15994710928 Email: [email protected]

Page 1 of 5 External Photos Details of: Overall view Details of: Top view Page 2 of 5 Details of: Bottom view Details of: Side view Page 3 of 5 Details of: Side view Details of: Front view Page 4 of 5 Details of: Rear view Details of: DC inlet Page 5 of 5 Details of: Adapter

Label and Label Location. Dimension: 35mm X 15mm

Page 1 of 2 Internal Photos Details of: Inside view Details of: PCB view Transmitting coil antenna Page 2 of 2 Details of: PCB view Details of: Transmitting coil antenna

Report Number: 68.760.19.0787.01A TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China RF exposure Estimation 1. Introduction Model : Elite Wireless Charging Stand Product Type : Wireless Charger Applicant : Theragun, Inc. Address : 2803 Colorado Avenue, Santa Monica, California, 90404, United States Manufacturer : Theragun, Inc. Address : 2803 Colorado Avenue, Santa Monica, California, 90404, United States This document is prepared to show compliance with the RF Exposure requirements as required in §1.1310 of the FCC Rules and Regulations. Report Number: 68.760.19.0787.01A TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China 2. Product information Product: Elite Wireless Charging Stand Model no.: Wireless Charger FCC ID: 2AU6TELITEWCS-01 IC: 25672-ELITEWCS01 Rating: 100-240VAC, 50-60Hz, 1.5A (for adapter) 20VDC, 2.25A (for Hand held Massager) RF Transmission Frequency: 110-165KHz Antenna Type: Integrated coil antenna Antenna gain: 0dBi Description of the EUT: The Equipment Under Test (EUT) is a Hand held Massager which operated at 110-165KHz for Wireless charging transmit function. Report Number: 68.760.19.0787.01A TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China 3. Limit and Guidelines on Exposure to Electromagnetic Fields According to §1.1310 system operating under the provisions of this section shall be operating in a manner that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. TABLE 1—LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 3.0-30 1842/f 4.89/f *900/f 2 6 30-300 61.4 0.163 1.0 6 300-1,500 f/300 6 1,500-100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f 2 30 30-300 27.5 0.073 0.2 30 300-1,500 f/1500 30 1,500-100,000 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density Per the guidance of KDB 680106, the E-field and H-field limits shown in the table above are extended down to 100kHz. 4. Test setup Report Number: 68.760.19.0787.01A TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China 5. Measurement procedure a) The RF exposure test was performed on the table in anechoic chamber. b) The measurement was investigated between the edge of the charger and center of the field probe in the closest state. c) Maximum E-field and H-field measurements were made on each of five sides of the EUT that could come in contact with a user. Five sides are defined as follows: Right (C), Top (E), Left (D), Rear (B) and Front (A). Refer to the test position diagram above. d) According to the guidance of KDB 680106 D01 v03 test distance was 15 cm on the surrounding sides from the EUT. e) Equipment approval considerations item 5.b) of KDB 680106 D01 v03 (1) Power transfer frequency is less than 1 MHz - The device operates at a frequency of 110 KHz to 165 KHz. (2) Output power from each primary coil is less than or equal to 15 watts. - Output power from primary coil: 27 Watts (Max.) so we have Submitted an Inquiry to FCC official. The Inquiry tracking number 339066. (3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. - The transfer system includes only single primary and secondary coils. Refer to a photo in the Internal. (4) Client device is placed directly in contact with the transmitter. - Client device is placed directly in contact with the transmitter. (5) The aggregate H-field strengths at 15 cm surrounding the device surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. - Refer to following worst test result (For more detail, please refer to section 7) 1) The worst E-Field Strength levels at 15 cm < 50 % of the MPE E-Field Strength limit 614 V/m Quickly charging test mode: 5.24 V/m < 307 V/m 2) The worst H-Field Strength levels at 15 cm < 50 % of the MPE H-Field Strength limit 1.63 A/m Quickly charging test mode: 0.0139 A/m < 0.815 A/m Report Number: 68.760.19.0787.01A TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China 6. Test Laboratory and test Equipment List Details about the Test Laboratory: Company name: Shenzhen Microtest Co., Ltd. No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China IC Registration No.: 21760 Telephone: Phone: +86-755-88850135 Fax: Fax: +86-755-88850136 Equipment list Description Manufacturer Model no. Serial no. Cal. due date Broadband Field Meter Narda Safety Test Solutions GmbH NBM-520 D-1699 2021/4/16 Probe E-Field Narda Safety Test Solutions EF0691 H-0571 2021/4/16 Report Number: 68.760.19.0787.01A TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China 7. Test Result Quickly Charging test mode: Electric Field Emissions Test Position Test Distance (cm) Measure Value (V/m) Limit (V/m…

Text truncated - open the document above for the full version.

Wireless charger approval FCC ID: 2AU6TELITEWCS-01 Data: 2020-04-20 There’s a wireless charger that would like to have your authorization as an inductive wireless power transfer applications approval. The specific product as below, wireless quick charger, with its designed features and specified description, meets special requirement for KDB 680106 D01 v03 section 5 (b) requirements. Company: Theragun, Inc. Product Name: Wireless Charger Model Number: Elite Wireless Charging Stand FCC ID: 2AU6TELITEWCS-01 KDB 680106 D01 v03 section 5 (b) requirement: Product Technical Specification: Result: Power transfer frequency is less than 1 MHz. 110-165KHz Complied Output power from each primary coil is less than or equal to 15 watts Max 27W Accepted through a KDB inquiry (tracking number 339066) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils Only single primary Complied Client device is placed directly in contact with the transmitter Placed directly Complied Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). Mobile exposure conditions only Complied The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. the detailed data please refer to RF exposure report Complied Best Regards Company Officer: Tony Zhong Telephone Number: +8615994710928 Email: [email protected]

Report Number: 68.760.19.0787.01 EMC_SZ_FR_23.03 FCC Release 2017-06-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 1 of 22 FCC - TEST REPORT Report Number : 68.760.19.0787.01 Date of Issue: May 20, 2020 Model : Elite Wireless Charging Stand Product Type : Wireless Charger Applicant : Theragun, Inc. Address : 2803 Colorado Avenue, Santa Monica, California, 90404, United States Manufacturer : Theragun, Inc. Address : 2803 Colorado Avenue, Santa Monica, California, 90404, United States Test Result : ◼ Positive  Negative Total pages including Appendices : 22 TÜV SÜD Certification and Testing (China) Co., Ltd. – Shenzhen Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD Certification and Testing (China) Co., Ltd. – Shenzhen Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜV SÜD Certification and Testing (China) Co., Ltd. – Shenzhen Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD Certification and Testing (China) Co., Ltd. – Shenzhen Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval Report Number: 68.760.19.0787.01 EMC_SZ_FR_23.03 FCC Release 2017-06-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 2 of 22 1 Table of Contents 1 Table of Contents ..................................................................................................................................................2 2 Details about the Test Laboratory .........................................................................................................................3 3 Description of the Equipment Under Test .............................................................................................................4 4 Summary of Test Standards .................................................................................................................................5 5 Summary of Test Results ......................................................................................................................................6 6 General Remarks ..................................................................................................................................................7 7 Test Setups ...........................................................................................................................................................8 8 Technical Requirement .........................................................................................................................................9 8.1 Conducted Emission Test .............................................................................................................................9 8.2 20 dB Bandwidth ........................................................................................................................................ 14 8.3 Radiated Emission Test ............................................................................................................................. 15 9 Test Equipment List ............................................................................................................................................ 21 10 System Measurement Uncertainty ................................................................................................................. 22 Report Number: 68.760.19.0787.01 EMC_SZ_FR_23.03 FCC Release 2017-06-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 3 of 22 2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name: TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District Shenzhen 518052 P.R. China Telephone: 86 755 8828 6998 Fax: 86 755 828 5299 FCC Registration No.: 514049 Report Number: 68.760.19.0787.01 EMC_SZ_FR_23.03 FCC Release 2017-06-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 4 of 22 3 Description of the Equipment Under Test Product: Wireless Charger Model no.: Elite Wireless Charging Stand FCC ID: 2AU6TELITEWCS-01 Options and accessories: Adapter and USB Cable Rated Input: 100-240VAC, 50-60Hz, 1.5A (for adapter) 20VDC, 2.25A (for Wireless Charger) Adapter information: Manufacturer: EDAC Power Electronics Co., Ltd. Model: EA1046SAR Input voltage: 100-240VAC, 50-60Hz, 1.5A Output voltage: 20VDC, 2.25A RF Transmission Frequency: 110-165 kHz Antenna Type: Integrated coil antenna Description of the EUT: The Equipment Under T…

Text truncated - open the document above for the full version.