2AU6TPRIME02Hand Held Massager with Bluetooth Low Energy

Firmly press and hold the center button on the button pad, then float the Theragun Prime across areas in need. Use the up ( ) and down (v) buttons on the button pad to adjust speed. Apply light to moderate pressure as needed. Getting started v Step 2 Get the Therabody app We’ll guide you through a stress-free setup and show you how to get the most out of your fully personalized app experience. Step 3 Feel the difference.™ Every day. Take a deep breath and treat yourself with guided treatment presets or go freestyle with 5 preset speeds. It’s all designed for you. Step 1 Turn on and float The Theragun Prime See Warnings insert for important safety instructions Theragun Triangle multi-grip Charging port LED speed indicator LED battery indicator Button pad Interchangeable attachments Using the Theragun Prime 1. To turn on the Theragun Prime, firmly press and hold the center button on the button pad. 2. Press the up ( ) and down (v) arrows to toggle between 5 preset speeds and adjust your treatment level. 3. To turn off the Theragun Prime, firmly press and hold the center button on the button pad. Connecting the attachments Align the attachment with the tip of the rotating arm and push to connect. To remove, grip the attachment, placing 1 finger on each side of the plastic connector. Pull off the attachment. CorrectIncorrect Charging the Theragun Prime 1. After turning off the device, plug the power adapter into the charging port of the Theragun Prime. 2. The LED battery indicator, located under the 5 LED speed indicator bars, will start flashing. 3. Charging is complete when all 3 LED lights of the LED battery indicator are lit. Cleaning Instructions: For the most hygienic Theragun device experience, sanitize it after each use by: 1. Wiping the device with a disinfectant wipe to remove any residue 2. Once the device is residue-free, use a new wipe to disinfect the surface area by wiping all sides in a downward motion. Smart Features Your Theragun Prime is smart device enabled with Bluetooth connectivity, designed to pair seamlessly with the Therabody app. When you download the app, you’ll be guided through a step-by-step setup and shown how to pair your device. Once paired with your device, the app can remotely adjust speed, activate guided treatment presets, and make real-time recommendations based on your feedback and recent activity. It’s truly your intuitive wellness partner on your journey to feeling better and moving more freely. Every day. Scan the QR code to get started. Your Theragun Prime comes with 4 different attachments designed for every muscle and need. Attachments Dampener For use on tender areas or near bones Standard Ball For overall, general use Thumb For lower back and trigger point therapy Cone For pinpoint muscle treatment Born in Los Angeles, CA. Designed for everybody. @Therabody WARNINGS BEFORE USING THE OR CHARGING THE PRIME, READ ALL THE INSTRUCTIONS AND CAUTIONARY MARKINGS IN THIS MANUAL, ON THE CHARGER, AND ON THE PRIME. The PRIME is intended for commercial or home use. We strive to make the PRIME as safe as possible. This is an advanced mechanical device with electric components. If the PRIME and its accessories are not used or maintained properly, there is a risk of fire, electric shock, or injury. Do not place your finger or any objects near the metal piston above the attachment while the PRIME is in use or immediately after use. The metal piston can become extremely hot. Do not use any attachments other than the ones provided by Theragun and only as instructed by Theragun. Do not use the PRIME on your head or near your genitals. Do not use the PRIME above the waist during pregnancy. Do not get hair caught in any moving part of the PRIME. Do not use the PRIME above your Adam’s Apple or C4. Do not get the PRIME wet. Only clean the PRIME with a magic eraser or a lightly damp towel. Do not block the vents of the motor. Never attempt to disassemble the PRIME. Never store the PRIME at temperatures above 40 C/104 F. Only charge the PRIME when the ambient temperature is between 0°C/32°F and 40°C/104°F. Never expose the PRIME or its charger to water. For long-term storage, the PRIME should be fully charged. This product is not intended to diagnose, treat, or prevent any diseases. When using the PRIME, these basic precautions should always be followed including: 1. USE ONLY AS INSTRUCTED. Use the PRIME as described in this PRIME Instruction Manual. Use only Theragun recommended accessories and replacement parts. Do not carry out any maintenance other than what is shown in the PRIME Instruction Manual or advised by Theragun. 2. NOT FOR CHILDREN. The PRIME and charger are not intended for use by young children or persons with reduced physical, sensory or reasoning capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction by a responsible person. Do not allow the PRIME to be used as a toy. Close attention is necessary when used by or near children. Children should be supervised to ensure that they do not play with the PRIME or charger. 3. REDUCING RISK OF INJURY. Charge the PRIME only with the Theragun PRIME charger. Other chargers may cause personal injury or damage. Do not connect the PRIME to a different power supply plug or car cigarette lighter. The internal battery will be permanently disabled or damaged. 4. CHARGING LOCATIONS. The PRIME should be charged indoors in a well ventilated, dry location. Do not charge the PRIME outdoors, in a bathroom or within 10 feet (3.1 meters) of a bathtub, or pool. Do not use the PRIME or charger on wet surfaces and do not expose the charger to moisture, rain, or snow. Do not use the PRIME or charger in the presence of explosive atmospheres (gaseous fumes, dust, or flammable materials). Sparks may be generated, possibly causing a fire. 5. UNPLUGGING THE CHARGER. Pull the plug, not the cord, to reduce the risk of damage to the electrical plug and cord. Never carry charger by its cord. …

Text truncated - open the document above for the full version.

Theragun, Inc. 6100 Wilshire Blvd. Suite 200, Los Angeles CA 90048-5107, USA Date (28/04/2021) TUV SUD BABT UNLIMITED TCB Octagon House, Segensworth North, Fareham, Hampshire, PO15 5RL, United Kingdom Confidentiality Request FCC ID: 2AU6TPRIME-02 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, (Theragun, Inc. / 6100 Wilshire Blvd. Suite 200, Los Angeles CA 90048-5107, USA) hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation (Theragun, Inc. / 6100 Wilshire Blvd. Suite 200, Los Angeles CA 90048-5107, USA) also hereby requests short-term confidential treatment of information accompanying this application as outlined below for a period of 180 days: Internal Photos External Photos User Manual Test Set-up Photographs The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: Felix Chen Telephone Number: (086) 136-0250 2115 Email: [email protected]

Theragun, Inc. 6100 Wilshire Blvd. Suite 200, Los Angeles CA 90048-5107, USA Date (28/04/2021) TUV SUD BABT UNLIMITED TCB Octagon House, Segensworth North, Fareham, Hampshire, PO15 5RL, United Kingdom Confidentiality Request FCC ID: 2AU6TPRIME-02 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, (Theragun, Inc. / 6100 Wilshire Blvd. Suite 200, Los Angeles CA 90048-5107, USA) hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation (Theragun, Inc. / 6100 Wilshire Blvd. Suite 200, Los Angeles CA 90048-5107, USA) also hereby requests short-term confidential treatment of information accompanying this application as outlined below for a period of 180 days: Internal Photos External Photos User Manual Test Set-up Photographs The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: Felix Chen Telephone Number: (086) 136-0250 2115 Email: [email protected]

Details of: Overall view Details of: External view Details of: External view Details of: External view Details of: Accessories (AC Adapter)

Details of: Overall view Details of: External view Details of: External view Details of: External view Details of: Accessories (AC Adapter)

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Details of: Internal view Details of: PCB view for main board Details of: PCB view for main board Details of: PCB view for BLE module ANTENNA Details of: PCB view for BLE module Details of: Battery pack Details of: Internal view for battery pack Details of: PCB view for PCM board Details of: PCB view for PCM board Details of: PCB view for Button board Details of: PCB view for Button board Details of: Motor Details of: Alternative motor

Report Number: 68.760.19.0789.02 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 RF exposure Estimation 1. Introduction Theragun Prime (FCC ID: 2AU6TPRIME-02) is a Hand held Massager, which contain BLE function inside. 2. Limit and Guidelines on Exposure to Electromagnetic Fields According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB 447498 D01 General RF Exposure Guidance v06, Mobile Portable RF Exposure, no SAR required if power is lower than the flowing threshold: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation25 • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 3. Calculation method [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 For BLE Radiated Power + tune up tolerance = 0.465 mW Distance = 5 mm f = 2.402 GHz [0.465/5] * SQRT(2.402) =0.144 0.144 ≤ 3.0 Therefore, excluded from SAR testing. TUV SUD China, Shenzhen Branch Reviewed by: Prepared By: Dawi Xu / EMC Project Manager Myron Yu/EMC Project Engineer Date: 2021-04-26 Date: 2021-04-26

Report Number: 68.760.19.0789.02 EMC_SZ_FR_23.02 FCC Release 2017-06-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 1 of 37 FCC - TEST REPORT Report Number : 68.760.19.0789.02 Date of Issue: April 27, 2021 Model : Theragun Prime Product Type : Hand held Massager Applicant : Theragun, Inc. Address : 6100 Wilshire Blvd. Suite 200, Los Angeles CA 90048-5107, USA Manufacturer : Theragun, Inc. Address : 6100 Wilshire Blvd. Suite 200, Los Angeles CA 90048-5107, USA Test Result : ◼ Positive  Negative Total pages including Appendices : 37 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. Report Number: 68.760.19.0789.02 EMC_SZ_FR_23.02 FCC Release 2017-06-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 2 of 37 1 Table of Contents 1 Table of Contents ..................................................................................................................................................2 2 Details about the Test Laboratory .........................................................................................................................3 3 Description of the Equipment under Test ..............................................................................................................4 4 Summary of Test Standards .................................................................................................................................5 5 Summary of Test Results ......................................................................................................................................6 6 General Remarks ..................................................................................................................................................7 7 Test Setups ...........................................................................................................................................................8 8 Systems test configuration ....................................................................................................................................9 9 Technical Requirement ...................................................................................................................................... 10 9.1 Conducted Emission .................................................................................................................................. 10 9.2 Conducted Peak output power ................................................................................................................... 13 9.3 6dB and 99% bandwidth ............................................................................................................................ 15 9.4 Power spectral density ............................................................................................................................... 18 9.5 Spurious RF conducted emissions ............................................................................................................. 20 9.6 Band edge .................................................................................................................................................. 24 9.7 Spurious radiated emissions for transmitter ............................................................................................... 26 10 Test Equipment List ........................................................................................................................................ 36 11 System Measurement Uncertainty ................................................................................................................. 37 Report Number: 68.760.19.0789.02 EMC_SZ_FR_23.02 FCC Release 2017-06-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 3 of 37 2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name: TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China FCC Registration Number: 514049 ISED#: 10320A CAB identifier: CN0077 Telephone: 86 755 8828 6998 Fax: 86 755 8828 5299 Report Number: 68.760.19.0789.02 EMC_SZ_FR_23.02 FCC Release 2017-06-20 TÜV SÜD Certificati…

Text truncated - open the document above for the full version.

Test Setup – Conducted emission Test Setup – Spurious emissions (30-1000 MHz) Test Setup Photos Test Setup – Spurious emissions (1000-18000 MHz) Test Setup – Spurious emissions (Above 18000 MHz)